arXiv subjects

Michail Matthaiou

Publications and source records attributed to Michail Matthaiou.

At least 109 records · Page 6Linked to original sources

arXiv2024

Joint Power Optimization and AP Selection for Secure Cell-Free Massive MIMO

In this paper, we investigate joint power control and access point (AP) selection scheme in a cell-free massive multiple-input multiple-output (CF-mMIMO) system under an active eavesdropping attack, where an eavesdropper tries to overhear the signal sent to one of the legitimate users by contaminating the uplink channel estimation. We formulate a joint optimization problem to minimize the eavesdropping spectral efficiency (SE) while guaranteeing a given SE requirement at legitimate users. The challenging formulated problem is converted into a more tractable form and an efficient low-complexity accelerated projected gradient (APG)-based approach is proposed to solve it. Our findings reveal that the proposed joint optimization approach significantly outperforms the heuristic approaches in terms of secrecy SE (SSE). For instance, the $50\%$ likely SSE performance of the proposed approach is $265\%$ higher than that of equal power allocation and random AP selection scheme.

eess.SP↗

arXiv2023

Protecting Massive MIMO-Radar Coexistence: Precoding Design and Power Control

This paper studies the coexistence between a downlink multiuser massive multi-input-multi-output (MIMO) communication system and MIMO radar. The performance of the massive MIMO system with maximum ratio ($\MR$), zero-forcing ($\ZF$), and protective $\ZF$ ($\PZF$) precoding designs is characterized in terms of spectral efficiency (SE) and by taking the channel estimation errors and power control into account. The idea of $\PZF$ precoding relies on the projection of the information-bearing signal onto the null space of the radar channel to protect the radar against communication signals. We further derive closed-form expressions for the detection probability of the radar system for the considered precoding designs. By leveraging the closed-form expressions for the SE and detection probability, we formulate a power control problem at the radar and base station (BS) to maximize the detection probability while satisfying the per-user SE requirements. This optimization problem can be efficiently tackled via the bisection method by solving a linear feasibility problem. Our analysis and simulations show that the $\PZF$ design has the highest detection probability performance among all designs, with intermediate SE performance compared to the other two designs. Moreover, by optimally selecting the power control coefficients at the BS and radar, the detection probability improves significantly.

cs.IT↗

arXiv2023

Cell-Free Massive MIMO Surveillance Systems

Wireless surveillance, in which untrusted communications links are proactively monitored by legitimate agencies, has started to garner a lot of interest for enhancing the national security. In this paper, we propose a new cell-free massive multiple-input multiple-output (CF-mMIMO) wireless surveillance system, where a large number of distributed multi-antenna aided legitimate monitoring nodes (MNs) embark on either observing or jamming untrusted communication links. To facilitate concurrent observing and jamming, a subset of the MNs is selected for monitoring the untrusted transmitters (UTs), while the remaining MNs are selected for jamming the untrusted receivers (URs). We analyze the performance of CF-mMIMO wireless surveillance and derive a closed-form expression for the monitoring success probability of MNs. We then propose a greedy algorithm for the observing vs, jamming mode assignment of MNs, followed by the conception of a jamming transmit power allocation algorithm for maximizing the minimum monitoring success probability concerning all the UT and UR pairs based on the associated long-term channel state information knowledge. In conclusion, our proposed CF-mMIMO system is capable of significantly improving the performance of the MNs compared to that of the state-of-the-art baseline. In scenarios of a mediocre number of MNs, our proposed scheme provides an 11-fold improvement in the minimum monitoring success probability compared to its co-located mMIMO benchmarker.

cs.IT↗

arXiv2023

Cell-Free Massive MIMO for ISAC: Access Point Operation Mode Selection and Power Control

This paper considers a cell-free massive multipleinput multiple-output (MIMO) integrated sensing and communication (ISAC) system, where distributed MIMO access points (APs) are used to jointly serve the communication users and detect the presence of a single target. We investigate the problem of AP operation mode selection, wherein some APs are dedicated for downlink communication, while the remaining APs are used for sensing purposes. Closed-form expressions for the individual spectral efficiency (SE) and mainlobe-to-average-sidelobe ratio (MASR) are derived, which are respectively utilized to assess the communication and sensing performances. Accordingly, a maxmin fairness problem is formulated and solved, where the minimum SE of the users is maximized, subject to the per-AP power constraints as well as sensing MASR constraint. Our numerical results show that the proposed AP operation mode selection with power control can significantly improve the communication performance for given sensing requirements.

cs.IT↗

arXiv2023

How to Combine OTFS and OFDM Modulations in Massive MIMO?

In this paper, we consider a downlink (DL) massive multiple-input multiple-output (MIMO) system, where different users have different mobility profiles. To support this system, we propose to use a hybrid orthogonal time frequency space (OTFS)/orthogonal frequency division multiplexing (OFDM) modulation scheme, where OTFS is applied for high-mobility users and OFDM is used for low-mobility users. Two precoding designs, namely full zero-forcing (FZF) precoding and partial zero-forcing (PZF) precoding, are considered and analyzed in terms of per-user spectral efficiency (SE). With FZF, interference among users is totally eliminated at the cost of high computational complexity, while PZF can be used to provide a trade-off between complexity and performance. To apply PZF precoding, users are grouped into two disjoint groups according to their mobility profile or channel gain. Then, zero-forcing (ZF) is utilized for high-mobility or strong channel gain users to completely cancel the inter-group interference, while maximum ratio transmission (MRT) is applied for low-mobility users or users with weak channel gain. To shed light on the system performance, the SE for high-mobility and low-mobility users with a minimum-mean-square-error (MMSE)-successive interference cancellation (SIC) detector is investigated. Our numerical results reveal that the PZF precoding with channel gain grouping can guarantee a similar quality of service for all users. In addition, with mobility-based grouping, the hybrid OTFS/OFDM modulation outperforms the conventional OFDM modulation for high-mobility users.

cs.IT↗

arXiv2023

Cell-free Massive MIMO and SWIPT: Access Point Operation Mode Selection and Power Control

This paper studies cell-free massive multiple-input multiple-output (CF-mMIMO) systems incorporating simultaneous wireless information and power transfer (SWIPT) for separate information users (IUs) and energy users (EUs) in Internet of Things (IoT) networks. To optimize both the spectral efficiency (SE) of IUs and harvested energy (HE) of EUs, we propose a joint access point (AP) operation mode selection and power control design, wherein certain APs are designated for energy transmission to EUs, while others are dedicated to information transmission to IUs. We investigate the problem of maximizing the total HE for EUs, considering constraints on SE for individual IUs and minimum HE for individual EUs. Our numerical results showcase that the proposed AP operation mode selection algorithm can provide up to $76\%$ and $130\%$ performance gains over random AP operation mode selection with and without power control, respectively.

cs.IT↗

arXiv2023

Superdirective Antenna Pairs for Energy-Efficient Terahertz Massive MIMO

Terahertz (THz) communication is widely deemed the next frontier of wireless networks owing to the abundant spectrum resources in the THz band. Whilst THz signals suffer from severe propagation losses, a massive antenna array can be deployed at the base station (BS) to mitigate those losses through beamforming. Nevertheless, a very large number of antennas increases the BS's hardware complexity and power consumption, and hence it can lead to poor energy efficiency (EE). To surmount this fundamental problem, we propose a novel array design based on superdirectivity and nonuniform inter-element spacing. Specifically, we exploit the mutual coupling between closely spaced elements to form superdirective pairs. A unique property of them is that all require the same excitation amplitude, and thus can be driven by a single radio frequency chain akin to conventional phased arrays. Moreover, they facilitate multi-port impedance matching, which ensures maximum power transfer for any beamforming angle. After addressing the implementation issues of superdirectivity, we show that the number of BS antennas can be effectively reduced without sacrificing the achievable rate. Simulation results demonstrate that our design offers huge EE gains compared to uncoupled arrays with uniform spacing, and hence could be a radical solution for future THz systems.

cs.IT↗

arXiv2023

EsaNet: Environment Semantics Enabled Physical Layer Authentication

Wireless networks are vulnerable to physical layer spoofing attacks due to the wireless broadcast nature, thus, integrating communications and security (ICAS) is urgently needed for 6G endogenous security. In this letter, we propose an environment semantics enabled physical layer authentication network based on deep learning, namely EsaNet, to authenticate the spoofing from the underlying wireless protocol. Specifically, the frequency independent wireless channel fingerprint (FiFP) is extracted from the channel state information (CSI) of a massive multi-input multi-output (MIMO) system based on environment semantics knowledge. Then, we transform the received signal into a two-dimensional red green blue (RGB) image and apply the you only look once (YOLO), a single-stage object detection network, to quickly capture the FiFP. Next, a lightweight classification network is designed to distinguish the legitimate from the illegitimate users. Finally, the experimental results show that the proposed EsaNet can effectively detect physical layer spoofing attacks and is robust in time-varying wireless environments.

cs.CR↗

arXiv2023

When Physical Layer Key Generation Meets RIS: Opportunities, Challenges, and Road Ahead

Physical layer key generation (PLKG) is a promising technology to obtain symmetric keys between a pair of wireless communication users in a plug-and-play manner. The shared entropy source almost entirely comes from the intrinsic randomness of the radio channel, which is highly dependent on the wireless environments. However, in some static/block fading wireless environments, the intrinsic randomness of the wireless channel is hard to be guaranteed. Very recently, thanks to reconfigurable intelligent surfaces (RISs) with their excellent ability on electromagnetic wave control, the wireless channel environment can be customized. In this article, we overview the RISaided PLKG in static indoor environments, including its channel model and hardware architectures. Then, we propose potential application scenarios and analyze the design challenges of RIS aided PLKG, including channel reciprocity, RIS reconfiguration speed and RIS deployment via proof-of-concept experiments on a RIS-aided PLKG prototype system. In particular, our experimental results show that the key generation rate is 15-fold higher than that without RIS in a static indoor environment. Next, we design a RIS jamming attack via a prototype experiment and discuss its possible attack-defense countermeasures. Finally, several conclusions and future directions are identified.

cs.CR↗

arXiv2023

Channel Customization for Limited Feedback in RIS-assisted FDD Systems

Reconfigurable intelligent surfaces (RISs) represent a pioneering technology to realize smart electromagnetic environments by reshaping the wireless channel. \textcolor[rgb]{0,0,0}{Jointly designing the transceiver and RIS relies on the channel state information (CSI), whose feedback has not been investigated in multi-RIS-assisted frequency division duplexing systems.} In this study, the limited feedback of the RIS-assisted wireless channel is examined by capitalizing on the ability of the RIS in channel customization. \textcolor[rgb]{0,0,0}{By configuring the phase shifters of the surfaces using statistical CSI, we customize a sparse channel in rich-scattering environments, which significantly reduces the feedback overhead in designing the transceiver and RISs. Since the channel is customized in terms of singular value decomposition (SVD) with full-rank, the optimal SVD transceiver can be approached without a matrix decomposition and feeding back the complete channel parameters. The theoretical spectral efficiency (SE) loss of the proposed transceiver and RIS design is derived by considering the limited CSI quantization. To minimize the SE loss, a bit partitioning algorithm that splits the limited number of bits to quantize the CSI is developed.} Extensive numerical results show that the channel customization-based transceiver with reduced CSI can achieve satisfactory performance compared with the optimal transceiver with full CSI. Given the limited number of feedback bits, the bit partitioning algorithm can minimize the SE loss by adaptively allocating bits to quantize the channel parameters.

cs.IT↗

arXiv2023

Network-Assisted Full-Duplex Cell-Free Massive MIMO: Spectral and Energy Efficiencies

We consider network-assisted full-duplex (NAFD) cell-free massive multiple-input multiple-output (CF-mMIMO) systems, where full-duplex (FD) transmission is virtually realized via half-duplex (HD) hardware devices. The HD access points (APs) operating in uplink (UL) mode and those operating in downlink (DL) mode simultaneously serve DL and UL user equipments (UEs) in the same frequency bands. We comprehensively analyze the performance of NAFD CF-mMIMO from both a spectral efficiency (SE) and energy efficiency (EE) perspectives. Specifically, we propose a joint optimization approach that designs the AP mode assignment, power control, and large-scale fading (LSFD) weights to improve the sum SE and EE of NAFD CF-mMIMO systems. We formulate two mixed-integer nonconvex optimization problems of maximizing the sum SE and EE, under realistic power consumption models, and the constraints on minimum individual SE requirements, maximum transmit power at each DL AP and UL UE. The challenging formulated problems are transformed into tractable forms and two novel algorithms are proposed to solve them using successive convex approximation techniques. More importantly, our approach can be applied to jointly optimize power control and LSFD weights for maximizing the sum SE and EE of HD and FD CF-mMIMO systems, which, to date, has not been studied. Numerical results show that: (a) our joint optimization approach significantly outperforms the heuristic approaches in terms of both sum SE and EE; (b) in CF-mMIMO systems, the NAFD scheme can provide approximately 30\% SE gains, while achieving a remarkable EE gain of up to 200\% compared with the HD and FD schemes.

cs.IT↗

arXiv2023

Massive Access in Extra Large-Scale MIMO with Mixed-ADC over Near Field Channels

Massive connectivity for extra large-scale multi-input multi-output (XL-MIMO) systems is a challenging issue due to the near-field access channels and the prohibitive cost. In this paper, we propose an uplink grant-free massive access scheme for XL-MIMO systems, in which a mixed-analog-to-digital converters (ADC) architecture is adopted to strike the right balance between access performance and power consumption. By exploiting the spatial-domain structured sparsity and the piecewise angular-domain cluster sparsity of massive access channels, a compressive sensing (CS)-based two-stage orthogonal approximate message passing algorithm is proposed to efficiently solve the joint activity detection and channel estimation problem. Particularly, high-precision quantized measurements are leveraged to perform accurate hyper-parameter estimation, thereby facilitating the activity detection. Moreover, we adopt a subarray-wise estimation strategy to overcome the severe angular-domain energy dispersion problem which is caused by the near-field effect in XL-MIMO channels. Simulation results verify the superiority of our proposed algorithm over state-of-the-art CS algorithms for massive access based on XL-MIMO with mixed-ADC architectures.

cs.IT↗

arXiv2023

Static Power Consumption Modeling and Measurement of Reconfigurable Intelligent Surfaces

Reconfigurable intelligent surfaces (RISs) are anticipated to transform wireless communication in a way that is both economical and energy efficient. Revealing the practical power consumption characteristics of RISs can provide an essential toolkit for the optimal design of RIS-assisted wireless communication systems and energy efficiency performance evaluation. Based on our previous work that modeled the dynamic power consumption of RISs, we henceforth concentrate more on static power consumption. We first divide the RIS hardware into three basic parts: the FPGA control board, the drive circuits, and the RIS unit cells. The first two parts are mainly to be investigated and the last part has been modeled as the dynamic power consumption in the previous work. In this work, the power consumption of the FPGA control board is regarded as a constant value, however, that of the drive circuit is a variant that is affected by the number of control signals and its self-power consumption characteristics. Therefore, we model the power consumption of the drive circuits of various kinds of RISs, i.e., PIN diode-/Varactor diode-/RF switch-based RIS. Finally, the measurement results and typical value of static power consumption are illustrated and discussed.

cs.IT↗

arXiv2023

Reconfigurable Massive MIMO: Harnessing the Power of the Electromagnetic Domain for Enhanced Information Transfer

The capacity of commercial massive multiple-input multiple-output (mMIMO) systems is constrained by the limited array aperture at the base station, and cannot meet the ever-increasing traffic demands of wireless networks. Given the array aperture, holographic MIMO with infinitesimal antenna spacing can maximize the capacity, but is physically unrealizable. As a promising alternative, reconfigurable mMIMO is proposed to harness the unexploited power of the electromagnetic (EM) domain for enhanced information transfer. Specifically, the reconfigurable pixel antenna technology provides each antenna with an adjustable EM radiation (EMR) pattern, introducing extra degrees of freedom for information transfer in the EM domain. In this article, we present the concept and benefits of availing the EMR domain for mMIMO transmission. Moreover, we propose a viable architecture for reconfigurable mMIMO systems, and the associated system model and downlink precoding are also discussed. In particular, a three-level precoding scheme is proposed, and simulation results verify its considerable spectral and energy efficiency advantages compared to traditional mMIMO systems. Finally, we further discuss the challenges, insights, and prospects of deploying reconfigurable mMIMO, along with the associated hardware, algorithms, and fundamental theory.

cs.IT↗

arXiv2022

(Non)-Coherent MU-MIMO Block Fading Channels with Finite Blocklength and Linear Processing

This paper studies the coherent and non-coherent multiuser multiple-input multiple-output (MU-MIMO) uplink system in the finite blocklength regime. The i.i.d. Gaussian codebook is assumed for each user. To be more specific, the BS first uses two popular linear processing schemes to combine the signals transmitted from all users, namely, MRC and ZF. Following it, the matched maximum-likelihood (ML) and mismatched nearest-neighbour (NN) decoding metric for the coherent and non-coherent cases are respectively employed at the BS. Under these conditions, the refined third-order achievable coding rate, expressed as a function of the blocklength, average error probability, and the third-order term of the information density (called as the channel perturbation), is derived. With this result in hand, a detailed performance analysis is then pursued, through which, we derive the asymptotic results of the channel perturbation, achievable coding rate, channel capacity, and the channel dispersion. These theoretical results enable us to obtain a number of interesting insights related to the impact of the finite blocklength: i) in our system setting, massive MIMO helps to reduce the channel perturbation of the achievable coding rate, which can even be discarded without affecting the performance with just a small-to-moderate number of BS antennas and number of blocks; ii) under the non-coherent case, even with massive MIMO, the channel estimation errors cannot be eliminated unless the transmit powers in both the channel estimation and data transmission phases for each user are made inversely proportional to the square root of the number of BS antennas; iii) in the non-coherent case and for fixed total blocklength, the scenarios with longer coherence intervals and smaller number of blocks offer higher achievable coding rate.

cs.IT↗

arXiv2022

Cell-Free Massive MIMO Meets OTFS Modulation

We provide the first-ever performance evaluation of orthogonal time frequency space (OTFS) modulation in cell-free massive multiple-input multiple-output (MIMO) systems. To investigate trade-off between performance and overhead, we apply embedded pilot-aided and superimposed pilot-based channel estimation methods. We then derive a closed-form expression for the individual user downlink and uplink spectral efficiencies as a function of the numbers of APs, users and delay-Doppler domain channel estimate parameters. Based on these analytical results, we also present new scaling laws that the AP's and user's transmit power should satisfy, to sustain a desirable quality of service. It is found that when the number of APs, $M_a$, grows without bound, we can reduce the transmit power of each user and AP proportionally to $1/M_a$ and $1/M_a^2$, respectively, during the uplink and downlink phases. We compare the OTFS performance with that of orthogonal frequency division multiplexing (OFDM) at high-mobility conditions. Our findings reveal that with shadowing correlation, OTFS modulation with embedded pilot-based channel estimation provides $30$-folds gain over the OFDM counterpart in terms of $95\%$-likely per-user downlink rate. Finally, with superimposed pilot-based channel estimation, the increase in the per-user throughput is more pronounced at the median rates over the correlated shadowing channels.

cs.IT↗

arXiv2022

Superdirective Arrays with Finite-Length Dipoles: Modeling and New Perspectives

Dense arrays can facilitate the integration of multiple antennas into finite volumes. In addition to the compact size, sub-wavelength spacing enables superdirectivity for endfire operation, a phenomenon that has been mainly studied for isotropic and infinitesimal radiators. In this work, we focus on linear dipoles of arbitrary yet finite length. Specifically, we first introduce an array model that accounts for the sinusoidal current distribution (SCD) on very thin dipoles. Based on the SCD, the loss resistance of each dipole antenna is precisely determined. Capitalizing on the derived model, we next investigate the maximum achievable rate under a fixed power constraint. The optimal design entails conjugate power matching along with maximizing the array gain. Our theoretical analysis is corroborated by the method of moments under the thin-wire approximation, as well as by full-wave simulations. Numerical results showcase that a super-gain is attainable with high radiation efficiency when the dipole antennas are not too short and thin.

cs.IT↗

arXiv2022

Channel Estimation in RIS-assisted Downlink Massive MIMO: A Learning-Based Approach

For downlink massive multiple-input multiple-output (MIMO) operating in time-division duplex protocol, users can decode the signals effectively by only utilizing the channel statistics as long as channel hardening holds. However, in a reconfigurable intelligent surface (RIS)-assisted massive MIMO system, the propagation channels may be less hardened due to the extra random fluctuations of the effective channel gains. To address this issue, we propose a learning-based method that trains a neural network to learn a mapping between the received downlink signal and the effective channel gains. The proposed method does not require any downlink pilots and statistical information of interfering users. Numerical results show that, in terms of mean-square error of the channel estimation, our proposed learning-based method outperforms the state-of-the-art methods, especially when the light-of-sight (LoS) paths are dominated by non-LoS paths with a low level of channel hardening, e.g., in the cases of small numbers of RIS elements and/or base station antennas.

cs.IT↗