arXiv subjects

Matt Eichenfield

Publications and source records attributed to Matt Eichenfield.

At least 19 recordsLinked to original sources

arXiv2026

Strategic Plan for Neutral Atom Quantum Computation

We present a strategic plan for neutral atom quantum computation, bringing together hardware development and theory advancements to achieve the goal of practical quantum advantage. The concept of practical quantum advantage is defined, along with how to verify claims of advantage, and approaches to designing quantum algorithms that deliver practical advantage. Future directions for neutral atom quantum processor hardware are described: scaling-up system size, Qubit encodings and atomic platforms, going further below threshold with neutral-atom logical-qubit performance, continuous reloading of qubits, and fast readout. We also explore opportunities for scalable integrated photonic control technologies. Alongside hardware advancements, new developments in quantum error correction and compilation of quantum circuits are proposed. Finally, we examine the opportunity of networking multiple neutral atom quantum processors together to perform distributed quantum computing and overcome possible limitations of a single system.

quant-ph↗

arXiv2026

Micro-electromechanical photonic integrated memristors

Programmable optical memristors embedded in photonic integrated circuits (PICs) are emerging as an important technology for high-speed optical storage and in-memory optical computing applications. These devices provide multi-level, non-volatile storage of optical phases that can be interrogated at the speed of light, enabling parallel data readout or energy-efficient multiply-accumulate operations in artificial neural networks. However, there remains several outstanding challenges with existing optical memristor technology including durability, material-induced optical losses, large-scale reconfigurability, or fabrication yield for realistic applications. Here we introduce an analog-programmable photonic memristor based on photonic integrated micro-electromechanical (MEMS) cantilevers produced in a CMOS foundry. The memristor consists of low-loss silicon nitride waveguides, requires no additional back-end materials integration, and is all electrically programmed with electrostatic-piezoelectric forces. We demonstrate up to 5-bit phase storage levels, 50 kbit/s programming speeds, strain-assisted non-volatility lifetimes >1 hour, >1 billion cycle endurance, and stress-tested millions of write-read cycles with pseudorandom bit sequences. We further extend the memory lifetime to several days with simple electronic refresh circuits in a portable battery-powered module, demonstrating a proof-of-concept optical random-access memory in static or dynamic configurations. Our MEMS-photonics technology represents an important step toward practical optical memristors.

physics.optics↗

arXiv2026

Towards a monolithic platform for coupling superconducting circuits to low-loss microwave phonons in AlScN on 4H-SiC

Hybrid superconducting-phonon quantum processing is promising for cavity QED, measurement-based quantum computing, and other quantum applications. Relative to microwave photons at the same frequency, phonons can provide ultra-compact footprints, extremely low losses, and greater connectivity. Phonons can also couple strongly to superconducting circuits through the piezoelectric effect. However, this promise rests on scalable platforms that achieve these benefits without degrading superconducting circuit performance. This motivates a monolithic platform combining low phononic loss, strong electromechanical coupling, and superconducting-circuit compatibility without requiring suspended phononics. Here, we characterize a monolithic quantum acoustic platform combining aluminum superconducting circuits on exposed silicon carbide (SiC) with piezoelectric aluminum scandium nitride (AlScN) on SiC for integrated phononics. This architecture is enabled by selective removal of AlScN from selected chip regions, allowing aluminum superconducting microwave resonators to be fabricated directly on the SiC while preserving adjacent AlScN-on-SiC regions for phonon transduction. The resulting Al-on-SiC resonators exhibit a coherent lifetime of 2.9 {\mu}s, demonstrating compatibility with aluminum superconducting quantum devices. In parallel, cryogenic surface acoustic delay-line measurements on the retained AlScN-on-SiC regions show low phononic propagation loss at 4.05 GHz, corresponding to an estimated phonon lifetime of 7.6 {\mu}s. Together with a previously demonstrated electromechanical coupling coefficient of about 4.3% and a theoretical upper bound of 8%, these results establish Al-on-SiC/AlScN-on-SiC as a promising monolithic platform for integrating superconducting microwave circuits with piezoelectric phononic components for quantum acoustic networking and hybrid quantum systems.

quant-ph↗

arXiv2026

Nonequilibrium thermodynamics of the acoustoelectric quantum vacuum

The quantum vacuum can assume thermal properties as a consequence of system kinematics, highlighting the nuance of our definition of particles in quantum field theory. Here, we explore this phenomenon in acoustoelectric systems, involving the interaction of phonons and plasmons, where the charge carriers drift at a constant velocity exceeding the speed of sound. Through an open quantum systems analysis, we show that the acoustoelectric quantum vacuum acquires a thermal character with a temperature defined by the drift velocity and the phonon wavevector. Realistic parameters yield effective temperatures of several Kelvin, establishing acoustoelectric systems as a promising platform for the investigation of quantum vacuum effects.

quant-ph↗

arXiv2026

Design of optomechanical transducers for sub-micron resolution ultrasound imaging

Ultrasound is a noninvasive, real-time, and therefore widely used imaging modality; yet its application in cellular and sub-cellular biology is significantly limited by rapidly increasing acoustic losses in aqueous solutions with decreasing wavelength. Here we introduce a nano-optomechanical cavity transducer platform to generate and detect ultrasound in aqueous solutions with a sub-micron acoustic wavelength. We analyze the full signal pathway through a combination of finite element method modeling and the coupled differential equations that describe the dispersive optomechanical interaction. Our findings project a signal-to-noise ratio in the thousands at ~5 GHz, limited by diffraction losses and thermal-acoustic noise. This work establishes a viable path towards optomechanical ultrasound systems capable of label-free imaging at cellular and sub-cellular length scales while also providing a broader framework for optomechanical crystal device operation in aqueous environments relevant to biochemical sensing, medical diagnostics, underwater acoustic sensing, and nanoscale imaging.

physics.optics↗

arXiv2026

Monolithic Integration of Piezo-Optomechanical Photonics and CMOS Electronics

Next-generation photonic architectures for AI, sensing, and quantum computing require thousands to millions of reprogrammable photonic devices on a chip[1]. The monolithic integration of Electronically-backed Photonic Integrated Circuits (EPICs) allows for very high density electrical interconnection and electronic drivers that can scale with photonics. Piezo-optomechanical photonic integrated circuits (POMPICs) offer low power consumption, high speed modulation, cryogenic compatibility and broadband optical transparency from ultraviolet to infrared wavelengths[2,3], but have not been demonstrated with monolithically integrated CMOS electronics. Here, we show a fully monolithic, all-CMOS fabricated platform for POMPICs co-fabricated with commercial control electronics. 200 millimeter photonic wafers are constructed directly on completed CMOS driver wafers by back-end-of-line processing, connecting integrated piezoelectric actuators under broadband silicon nitride waveguides to a high-density digital backplane comprising >2 million electrical connections per die with 6.4x6.4 micron electrode pitch. We introduce segmented POMPIC components as Photonic Digital-to-Analog converters (PDACs) that convert low-voltage digital electronic signals to multi-bit analog optical phase and amplitude modulation, and we demonstrate parallel control of optical phase shifters, Mach-Zehnder interferometers, optical routing trees, and tunable ring resonators using a standard HDMI interface to program CMOS electronics. We test multiple reticles and perform electronic and photonic characterization across the entire wafer to establish uniformity and yield, demonstrating wafer-scale integration of POMPICs on an electronic backplane and enabling dense, scalable electronic control of piezo-optomechanical circuits.

physics.optics↗

arXiv2026

Noise factor of Brillouin amplifiers

Stimulated Brillouin scattering (SBS), an optical nonlinearity arising from photon-phonon interactions, has formed the basis for a large class of optical signal processing devices, including Brillouin amplifiers. A limiting factor of such amplifiers is the noise due to thermal-mechanical fluctuations that the phonons imprint on the optical signal. Prior work has either inferred or experimentally observed a noise factor ($F$) that depends only on the thermal occupation of the phonons ($F\approx 1+n_{th}$). We show that this noise factor results naturally from a Hamiltonian-based spatio-temporal coupled mode treatment in the limit of large Brillouin amplification and when phonon propagation is neglected. Moreover, this theoretical framework allows us to extend our treatment to a much larger and more representative parameter space for emerging SBS systems; specifically, this analysis accounts for the forward or backward nature of the scattering process and the effects of phonon propagation, optical loss, and small Brillouin gains. Our results demonstrate that the noise factor can deviate radically from $F\approx 1+n_{th}$ for a host of modern SBS devices, especially those in which phonon propagation significantly changes the coupled mode dynamics.

physics.optics↗

arXiv2026

Noise and dynamics in acoustoelectric waveguides

We present a quantum field theoretic formulation of acoustoelectric interactions in waveguide-like systems of arbitrary cross-section. Building on an open quantum systems approach, we derive a unified description of plasmon-phonon coupling that incorporates dissipation, noise, and the influence of drift currents. Our analysis captures both bulk and surface plasmon modes, highlighting how drift currents Doppler-shift plasmonic resonances and reshape the phonon noise spectrum. The resulting Heisenberg-Langevin equations yield closed-form expressions for frequency shifts, gain, and noise power spectra, enabling direct evaluation of performance metrics such as the noise factor in acoustoelectric amplifiers and oscillators. In the appropriate limits, this framework reproduces known results while extending them to complex geometries.

physics.optics↗

arXiv2026

Ultra-low loss piezo-optomechanical low-confinement silicon nitride platform for visible wavelength quantum photonic circuits

Realizing photonic quantum computing at scale requires integrated circuits that combine ultra-low loss with fast, low-power, low-hysteresis, and low-crosstalk reconfiguration. These requirements are particularly challenging at visible wavelengths, where many quantum resource-state generators, including single-photon sources and quantum memories, naturally operate. Low-confinement silicon nitride waveguides offer the requisite loss performance, but conventional thermo-optic modulators dissipate significant static power, driving thermal crosstalk and precluding cryogenic operation. Visible-wavelength piezo-optomechanical circuits avoid these drawbacks, but existing demonstrations rely either on high-confinement waveguides with propagation losses of 35-100 dB/m, or on low-confinement platforms using foundry-incompatible PZT. Here we combine piezo-optomechanical actuation with a CMOS-foundry-fabricated, low-confinement silicon nitride platform, achieving 2.6 dB/m propagation loss at 780 nm, megahertz-scale modulation bandwidth, a half-wave voltage-length product of 2.8 Vm, and negligible hysteresis. We demonstrate reconfigurable Mach-Zehnder interferometers with 0.63 dB loss per spiral phase shifter, enabling deep, actively reconfigurable visible-wavelength quantum photonic circuits.

physics.optics↗

arXiv2026

Exact Solutions to Acoustoelectric Interactions in Arbitrary Geometries

Acoustoelectric interactions occur when free carriers in a semiconductor interact with the fields of an acoustic wave in a piezoelectric medium. These interactions can amplify acoustic waves, as well as give rise to extremely large phononic nonlinearities and strong non-reciprocal effects. The field of acoustoelectric devices is currently dependent on analytical and perturbative solutions for the two simplest arrangements of piezoelectric-semiconductor materials. While these canonical models have allowed the field to advance substantially, new geometries are arising that do not satisfy assumptions integral to these models. These assumptions include the treatment of the interactions between the acoustic fields and free carriers as weak, the neglect of the tensorial nature of the material properties, the omission of the spatial variations in the phonons' electric field profiles, and the disregard of elastic coupling across material boundaries, among others. We develop, for the first time, a finite element method (FEM) model to solve for acoustoelectric interactions in arbitrary geometries that avoids making the assumptions of the canonical models. We verify the FEM model using results for amplification, dispersion, and non-reciprocity obtained from the canonical models in their regime of validity. We then examine the acoustoelectric effect in two geometries not covered by the canonical models: a thin piezoelectric film placed on a semiconductor substrate and a fully 2D waveguide under a thin semiconductor layer. This work lays the foundation for accurate modeling of arbitrary acoustoelectric geometries such as those currently being developed for all-acoustic radio frequency (RF) signal processing, acoustoelectrically enhanced photonic devices, and quantum acoustoelectric devices.

physics.app-ph↗

arXiv2025

Hybrid electrostatic-piezo MEMS photonic integrated modulators

Programmable photonic integrated circuits (PICs) have recently emerged as an important technology for quantum information science and artificial neural networks. In particular, PICs with MEMS-based modulators have the advantages of voltage-based control, ultra-low-energy consumption, cryogenic compatibility, and CMOS-foundry support. Here we report a cantilever optical modulator that utilizes hybrid piezoelectric and electrostatic tuning forces together on a monolithic silicon nitride (SiN) PIC platform. The device achieves actuation of visible-wavelength light with quasi-static tuning up to 10 kHz at 1.5 V{\pi}-cm as well as high-speed (>20 MHz) AC modulation with dynamically adjustable (25 - 40 MHz) mechanical resonances. We report the physics of how geometric nonlinearities such as capacitive pull-in give rise to suspended and contacted cantilever modes. These reversible operating regimes generate different strain profiles and boundary conditions which are responsible for the active tuning of the mechanical resonances. Our proof-of-concept electrostatic-piezo modulator shows promising potential in large-scale programmable PICs applied to high-speed optical switching and optomechanical sensing.

physics.optics↗

arXiv2025

Quantum-Limited Acoustoelectric Amplification in a Piezoelectric-2DEG Heterostructure

We provide a quantum mechanical description of phonon amplification in a heterostructure consisting of a two-dimensional electron gas (2DEG) stacked on top of a piezoelectric material. An applied drift voltage effectively creates a population inversion in the momentum states of the 2DEG electrons, giving rise to spontaneous emission of phonons. Once an acoustic wave is launched, the pumped electrons release phonons via stimulated emission, returning to depleted ground states before being pumped back to the excited states. We show that whereas efficient amplification using a 1D electron gas requires the acoustic wavelength to roughly equal the average electron-electron spacing, a 2DEG enables efficient amplification for any wavelength greater than the average electron-electron spacing. We derive the imaginary and real parts of the 2DEG first-order acoustic susceptibility as functions of electronic drift velocity in specific limits and derive the gain per unit length for the signal and the quantum noise, with the gain matching the classical result in the short-electronic-lifetime (low-mobility) regime. Moreover, we analyze the gain clamping due to pump depletion and calculate the maximum achievable intensity. Our results provide a framework for designing novel acoustic devices including a quantum phononic laser and phase-insensitive quantum phononic amplifiers.

cond-mat.mes-hall↗

arXiv2025

An integrated photonics platform for high-speed, ultrahigh-extinction, many-channel quantum control

High-fidelity control of the thousands to millions of programmable qubits needed for utility-scale quantum computers presents a formidable challenge for control systems. In leading atomic systems, control is optical: UV-NIR beams must be fanned out over numerous spatial channels and modulated to implement gates. While photonic integrated circuits (PICs) offer a potentially scalable solution, they also need to simultaneously feature high-speed and high-extinction modulation, strong inter-channel isolation, and broad wavelength compatibility. Here, we introduce and experimentally validate a foundry-fabricated PIC platform that overcomes these limitations. Designed for Rubidium-87 neutral atom quantum computers, our 8-channel PICs, fabricated on a 200-mm wafer process, demonstrate an advanced combination of performance metrics. At the 795 nm single-qubit gate wavelength, we achieve a mean extinction ratio (ER) of 71.4 $\pm$ 1.1 dB, nearest-neighbor on-chip crosstalk of -68.0 $\pm$ 1.0 dB, and -50.8 $\pm$ 0.2 dB after parallel beam delivery in free-space. This high-performance operation extends to the 420 nm and 1013 nm wavelengths for two-qubit Rydberg gates, showing ERs of 42.4 dB (detector-limited) and 61.5 dB, respectively. The devices exhibit 10-90% rise times of 26 $\pm$ 7 ns, achieve dynamic switching to -60 dB levels within microsecond timescales, and show pulse stability errors at the $10^{-3}$ level. This work establishes a scalable platform for developing advanced large-scale optical control required in fault-tolerant quantum computers and other precision technologies.

quant-ph↗

arXiv2025

An Electrically Injected and Solid State Surface Acoustic Wave Phonon Laser

Surface acoustic waves (SAWs) enable a wide array of technologies including RF filters, chemical and biological sensors, acousto-optic devices, acoustic control of microfluidic flow in lab-on-a-chip systems, and quantum phononics. While numerous methods exist for generating SAWs, they each have intrinsic limitations that inhibit performance, operation at high frequencies, and use in systems constrained in size, weight, and power. Here, for the first time, we present a completely solid-state, single-chip SAW phonon laser that is comprised of a lithium niobate SAW resonator with an internal, DC electrically injected and broadband semiconductor gain medium with $<$0.15 mm$^2$ footprint. Below the threshold bias of 36 V, the device behaves as a resonant amplifier, and above it exhibits self-sustained coherent oscillation, linewidth narrowing, and high output powers. A continuous on-chip acoustic output power of up to -6.1 dBm is generated at 1 GHz with a resolution-limited linewidth of $<$77 Hz and a carrier phase noise of -57 dBc/Hz at 1 kHz offset. Through detailed modeling, we show pathways for improving these devices' performance including mHz linewidths, sub -100 dBc/Hz phase noise at 1 kHz, high power efficiency, footprints less than 550 um$^2$ at 10 GHz, and SAW generation approaching the hundreds of GHz regime. This demonstration provides a fundamentally new approach to SAW generation, paving the way toward ultra-high-frequency SAW sources on a chip and highly miniaturized and efficient SAW-based systems that can be operated without an external RF source.

physics.app-ph↗

arXiv2025

Towards Navigation-Grade and Deployable Optomechanical Accelerometry

We design and experimentally demonstrate an architecture for achieving navigation-grade, fiber-packaged optomechanical accelerometers that can operate with a large dynamic range, over a wide temperature range, and without sophisticated laser sources. Our accelerometer architecture is based on a novel set of design principles that take advantage of the strengths of optomechanical accelerometry while eliminating many of its historical weaknesses. Displacement readout is provided by an integrated, differential strain-sensing Mach-Zehnder interferometer (DSMZI) attached to an ultra-rigid, bulk-micromachined proof mass having a 93.4 kHz fundamental resonance frequency (22.5 pm/g displacement). Despite the extreme rigidity, the high displacement sensitivity provides an insertion loss limited 4.2 $\mu g/\sqrt{\mathrm{Hz}}$ acceleration resolution, with a straight-forward path to achieving 330 $n g/\sqrt{\mathrm{Hz}}$ by improving the fiber-to-chip coupling. Further, we show that the combination of high rigidity and intrinsic differential optical readout makes the device insensitive to the common causes of bias instability, and we measure a bias instability of 6.3 $\mu g$ at 243 seconds. The DSMZI provides a 17 nm optical bandwidth and a temperature operating range of greater than 20 $^\circ\mathrm{C}$, both orders of magnitude larger than previous demonstrations of optomechanical accelerometers. The high rigidity and large optical bandwidth yield an expected dynamic range of 165.4 dB. The combination of high acceleration resolution, high dynamic range, low bias instability, and intrinsic insensitivity to wavelength, temperature, and package stresses makes our device well suited for deployment in realistic environments demanded by real-world applications and demonstrates a path for optomechanical accelerometers to ultimately exceed the performance of all other chip-based accelerometers.

physics.optics↗

arXiv2025

Strongly Electromechanical Coupled Phononic Waveguides in Aluminum Scandium Nitride on Silicon Carbide

Guided phonons have become an increasingly important platform for classical and quantum information processing. While conventional surface acoustic wave systems are typically only guided in the vertical direction, two-dimensionally confined waveguide systems offer significant advantages in terms of density of phononic circuit components and much higher intensities of strain and piezoelectric fields, which make them promising candidates for advancing acoustoelectric and quantum phononic applications. One such material system for generating and guiding phonons at gigahertz frequencies is AlScN on SiC, which can be synthesized by sputter depositing AlScN directly onto SiC wafers. The AlScN on SiC platform allows for tightly vertically confined acoustic modes with high electromechanical coupling, high speed of sound, and simple fabrication of strip and rib waveguides. Until now, this system has only been studied as a slab waveguide platform, i.e., without any lateral waveguiding. Here, we present a 2D-confined phononic waveguide architecture in AlScN on SiC with strongly electromechanically coupled modes that could serve as a platform for phononic routing, power-efficient active and nonlinear phononic devices such as amplifiers, mixers, and oscillators, as well as for interacting with quantum systems such as vacancy centers, charge carriers, photons, and spins. We study two distinct gigahertz frequency waveguide mode families using impedance matched interdigital transducers and characterize their electromechanical coupling and propagation losses. Additionally, we analyze how these waveguides could interact with various important quantum and classical systems that can be either embedded in SiC or heterogeneously integrated on the surface.

quant-ph↗

arXiv2025

Scalable low loss cryogenic packaging of quantum memories in CMOS-foundry processed photonic chips

Optically linked solid-state quantum memories such as color centers in diamond are a promising platform for distributed quantum information processing and networking. Photonic integrated circuits (PICs) have emerged as a crucial enabling technology for these systems, integrating quantum memories with efficient electrical and optical interfaces in a compact and scalable platform. Packaging these hybrid chips into deployable modules while maintaining low optical loss and resiliency to temperature cycling is a central challenge to their practical use. We demonstrate a packaging method for PICs using surface grating couplers and angle-polished fiber arrays that is robust to temperature cycling, offers scalable channel count, applies to a wide variety of PIC platforms and wavelengths, and offers pathways to automated high-throughput packaging. Using this method, we show optically and electrically packaged quantum memory modules integrating all required qubit controls on chip, operating at millikelvin temperatures with < 3dB losses achievable from fiber to quantum memory.

quant-ph↗

arXiv2025

Gigahertz-Frequency, Acousto-Optic Phase Modulation of Visible Light in a CMOS-Fabricated Photonic Circuit

Here we present an efficient, visible-light, gigahertz-frequency acousto-optic modulator fabricated on a 200 mm wafer in a volume CMOS foundry. Our device combines a piezoelectric transducer and a photonic waveguide within a single microstructure that confines both a propagating optical mode and an electrically excitable breathing-mode mechanical resonance. By tuning the device's geometry to optimize the optomechanical interaction, we achieve modulation depths exceeding 2 rad with 15 mW applied microwave power at 2.31 GHz in a 2 mm long device. This corresponds to a modulation figure of merit of $V_{\pi}\cdot L$ = 0.26 Vcm in a visible-light, integrated acousto-optics platform that can be straightforwardly extended to a wide range of optical wavelengths and modulation frequencies. For the important class of gigahertz-frequency modulators that can handle hundreds of milliwatts of visible-light optical power, which are critical for scalable quantum control systems, this represents a 15x decrease in $V_{\pi}$ and a 100x decrease in required microwave power compared to the commercial state-of-the-art and existing work in the literature.

physics.optics↗