arXiv subjects

Markus Kästner

Publications and source records attributed to Markus Kästner.

49 records · Page 3Linked to original sources

arXiv2021

Simulation of self-piercing rivetting processes in fibre reinforced polymers: Material modelling and parameter identification

This paper addresses the numerical simulation of self-piercing rivetting processes to join fibre reinforced polymers and sheet metals. Special emphasis is placed on the modelling of the deformation and failure behaviour of the composite material. Different from the simulation of rivetting processes in metals, which requires the modelling of large plastic deformations, the mechanical response of composites is typically governed by intra- and interlaminar damage phenomena. Depending on the polymeric matrix, viscoelastic effects can interfere particularly with the long-term behaviour of the joint. We propose a systematic approach to the modelling of composite laminates, discuss limitations of the used model, and present details of parameter identification. Homogenisation techniques are applied to predict the mechanical behaviour of the composite in terms of effective anisotropic elastic and viscoelastic material properties. In combination with a continuum damage approach this model represents the deformation and failure behaviour of individual laminae. Cohesive zone elements enable the modelling of delamination processes. The parameters of the latter models are identified from experiments. The defined material model for the composite is eventually utilised in the simulation of an exemplary self-piercing rivetting process.

physics.app-ph↗

arXiv2021

Modeling and simulation of interface failure in metal-composite hybrids

The application of hybrid composites in lightweight engineering enables the combination of material-specific advantages of fiber-reinforced polymers and classical metals. The interface between the connected materials is of particular interest since failure often initializes in the bonding zone. In this contribution the connection of an aluminum component and a glass fiber-reinforced epoxy is considered on the microscale. The constitutive modeling accounts for adhesive failure of the local interfaces and cohesive failure of the bulk material. Interface failure is represented by cohesive zone models, while the behavior of the polymer is described by an elastic-plastic damage model. A gradient-enhanced formulation is applied to avoid the well-known mesh dependency of local continuum damage models. The application of numerical homogenization schemes allows for the prediction of effective traction-separation relations. Therefore, the influence of the local interface strength and geometry of random rough interfaces on the macroscopical properties is investigated in a numerical study. There is a positive effect of an increased roughness on the effective joint behavior.

physics.app-ph↗

arXiv2021

Phase-field modelling for fatigue crack growth under laser-shock-peening-induced residual stresses

For the fatigue life of thin-walled components, not only fatigue crack initiation, but also crack growth is decisive. The phase-field method for fracture is a powerful tool to simulate arbitrary crack phenomena. Recently, it has been applied to fatigue fracture. Those models pose an alternative to classical fracture-mechanical approaches for fatigue life estimation. In the first part of this paper, the parameters of a phase-field fatigue model are calibrated and its predictions are compared to results of fatigue crack growth experiments of aluminium sheet material. In the second part, compressive residual stresses are introduced into the components with the help of laser shock peening. It is shown that those residual stresses influence the crack growth rate by retarding and accelerating the crack. In order to study these fatigue mechanisms numerically, a simple strategy to incorporate residual stresses in the phase-field fatigue model is presented and tested with experiments. The study shows that the approach can reproduce the effects of the residual stresses on the crack growth rate.

cond-mat.mtrl-sci↗

arXiv2021

Reconstructing random heterogeneous media through differentiable optimization

Microstructure reconstruction is a key enabler of process-structure-property linkages, a central topic in materials engineering. Revisiting classical optimization-based reconstruction techniques,they are recognized as a powerful framework to reconstruct random heterogeneous media, especially due to their generality and controllability. The stochasticity of the available approaches is, however, identified as a performance bottleneck. In this work, reconstruction is approached as a differentiable optimization problem, where the error of a generic prescribed descriptor is minimized under consideration of its derivative. As an exemplary descriptor, a suitable differentiable version of spatial correlations is formulated, along with a multigrid scheme to ensure scalability. The applicability of differentiable optimization realized through this descriptor is demonstrated using a wide variety of heterogeneous media, achieving exact statistical equivalence with errors as low as 0 in a short time. We conclude that, while still in an early stage of development, this approach has the potential to significantly alleviate the computational effort currently associated with reconstructing general random heterogeneous media.

cond-mat.mtrl-sci↗

arXiv2020

Phase-field modeling of fracture in heterogeneous materials -- jump conditions, convergence and crack propagation

In this contribution, a variational diffuse modeling framework for cracks in heterogeneous media is presented. A static order parameter smoothly bridges the discontinuity at material interfaces, while an evolving phase-field captures the regularized crack. The key novelty is the combination of a strain energy split with a partial rank-I relaxation in the vicinity of the diffuse interface. The former is necessary to account for physically meaningful crack kinematics like crack closure, the latter ensures the mechanical jump conditions throughout the diffuse region. The model is verified by a convergence study, where a circular bi-material disc with and without a crack is subjected to radial loads. For the uncracked case, analytical solutions are taken as reference. In a second step, the model is applied to crack propagation, where a meaningful influence on crack branching is observed, that underlines the necessity of a reasonable homogenization scheme. The presented model is particularly relevant for the combination of any variational strain energy split in the fracture phase-field model with a diffuse modeling approach for material heterogeneities.

cond-mat.mtrl-sci↗

arXiv2020

Analysis of process-induced damage in remote laser cut carbon fibre reinforced polymers

In this contribution a method is introduced that allows for a linkage between the process-induced structural damage and the fracture behaviour. Based on an anisotropic elastic material model, different modelling approaches for initial damage effects are introduced and compared. The approaches are applied to remote laser cut carbon fibre reinforced polymers in order to model various thermally induced damage effects like chemical decomposition, micro-cracks and delamination. The dimensions of this heat affected zone are calculated with 1D-heat conduction. In experiment and simulation milled and laser cut specimens with different process parameters are compared in order to quantify the impact of the cutting technology on the fracture behaviour. For this purpose open hole specimens were used.

physics.app-ph↗

arXiv2020

Phase-Field Modeling of Crack Branching and Deflection in Heterogeneous Media

This contribution presents a diffuse framework for modeling cracks in heterogeneous media. Interfaces are depicted by static phase-fields. This concept allows the use of non-conforming meshes. Another phase-field is used to describe the crack evolution in a regularized manner. The interface modeling implements two combined approaches. Firstly, a method from the literature is extended where the interface is incorporated by a local reduction of the fracture toughness. Secondly, variations of the elastic properties across the interface are enabled by approximating the abrupt change between two adjacent subdomains using a hyperbolic tangent function, which alters the elastic material parameters accordingly. The approach is validated qualitatively by means of crack patterns and quantitatively with respect to critical energy release rates with fundamental analytical results from Linear Elastic Fracture Mechanics, where a crack impinges an arbitrarily oriented interface and either branches, gets deflected or experiences no interfacial influence. The model is particularly relevant for phase-field analyses in heterogeneous, possibly complex-shaped solids, where cohesive failure in the constituent materials as well as adhesive failure at interfaces and its quantification play a role.

cond-mat.mtrl-sci↗

arXiv2019

An efficient phase-field model for fatigue fracture in ductile materials

Fatigue fracture in ductile materials, e. g. metals, is caused by cyclic plasticity. Especially regarding the high numbers of load cycles, plastic material models resolving the full loading path are computationally very demanding. Herein, a model with particularly small computational effort is presented. It provides a macroscopic, phenomenological description of fatigue fracture by combining the phase-field method for brittle fracture with a classic durability concept. A local lifetime variable is obtained, which degrades the fracture resistance progressively. By deriving the stress-strain path from cyclic material characteristics, only one increment per load cycle is needed at maximum. The model allows to describe fatigue crack initiation, propagation and residual fracture and can reproduce Paris behaviour.

cond-mat.mtrl-sci↗

arXiv2019

Phase-Field Modelling of Interface Failure in Brittle Materials

A phase-field approach is proposed for interface failure between two possibly dissimilar materials. The discrete adhesive interface is regularised over a finite width. Due to the use of a regularised crack model for the bulk material, an interaction between the length scales of the crack and the interface can occur. An analytic one-dimensional analysis has been carried out to quantify this effect and a correction is proposed, which compensates influences due to the regularisation in the bulk material. For multi-dimensional analyses this approach cannot be used straightforwardly, as is shown, and a study has been undertaken to numerically quantify the compensation factor due to the interaction. The aim is to obtain reliable and universally applicable results for crack propagation along interfaces between dissimilar materials, such that they are independent from the regularisation width of the interface. The method has been tested and validated on three benchmark problems. The compensation is particularly relevant for phase-field analyses in heterogeneous materials, where cohesive failure in the constituent materials as well as adhesive failure at interfaces play a role.

cond-mat.mtrl-sci↗

arXiv2019

Combined molecular dynamics and phase-field modelling of crack propagation in defective graphene

In this work, a combined modelling approach for crack propagation in defective graphene is presented. Molecular dynamics (MD) simulations are used to obtain material parameters (Young's modulus and Poisson ratio) and to determine the energy contributions during the crack evolution. The elastic properties are then applied in phase-field continuum simulations which are based on the Griffith energy criterion for fracture. In particular, the influence of point defects on elastic properties and the fracture toughness are investigated. For the latter, we obtain values consistent with recent experimental findings. Further, we discuss alternative definitions of an effective fracture toughness, which accounts for the conditions of crack propagation and establishes a link between dynamic, discrete and continuous, quasi-static fracture processes on MD level and continuum level, respectively. It is demonstrated that the combination of MD and phase-field simulations is a well-founded approach to identify defect-dependent material parameters.

cond-mat.mtrl-sci↗

arXiv2018

Reversible magnetomechanical collapse: virtual touching and detachment of rigid inclusions in a soft elastic matrix

Soft elastic composite materials containing particulate rigid inclusions in a soft elastic matrix are candidates for developing soft actuators or tunable damping devices. The possibility to reversibly drive the rigid inclusions within such a composite together to a close-to-touching state by an external stimulus would offer important benefits. Then, a significant tuning of the mechanical properties could be achieved due to the resulting mechanical hardening. For a long time, it has been argued whether a virtual touching of the embedded magnetic particles with subsequent detachment can actually be observed in real materials, and if so, whether the process is reversible. Here, we present experimental results that demonstrate this phenomenon in reality. Our system consists of two paramagnetic nickel particles embedded at finite initial distance in a soft elastic polymeric gel matrix. Magnetization in an external magnetic field tunes the magnetic attraction between the particles and drives the process. We quantify the scenario by different theoretical tools, i.e., explicit analytical calculations in the framework of linear elasticity theory, a projection onto simplified dipole-spring models, as well as detailed finite-element simulations. From these different approaches, we conclude that in our case the cycle of virtual touching and detachment shows hysteretic behavior due to the mutual magnetization between the paramagnetic particles. Our results are important for the design and construction of reversibly tunable mechanical damping devices. Moreover, our projection on dipole-spring models allows the formal connection of our description to various related systems, e.g., magnetosome filaments in magnetotactic bacteria.

cond-mat.soft↗

arXiv2016

Adaptive Mesh Refinement Strategies in Isogeometric Analysis - A Computational Comparison

We explain four variants of an adaptive finite element method with cubic splines and compare their performance in simple elliptic model problems. The methods in comparison are Truncated Hierarchical B-splines with two different refinement strategies, T-splines with the refinement strategy introduced by Scott et al. in 2012, and T-splines with an alternative refinement strategy introduced by some of the authors. In four examples, including singular and non-singular problems of linear elasticity and the Poisson problem, the H1-errors of the discrete solutions, the number of degrees of freedom as well as sparsity patterns and condition numbers of the discretized problem are compared.

math.NA↗

arXiv2012

Fluctuations and differential contraction during regeneration of Hydra vulgaris tissue toroids

We studied regenerating bilayered tissue toroids dissected from Hydra vulgaris polyps and relate our macroscopic observations to the dynamics of force-generating mesoscopic cytoskeletal structures. Tissue fragments undergo a specific toroid-spheroid folding process leading to complete regeneration towards a new organism. The time scale of folding is too fast for biochemical signalling or morphogenetic gradients which forced us to assume purely mechanical self-organization. The initial pattern selection dynamics was studied by embedding toroids into hydro-gels allowing us to observe the deformation modes over longer periods of time. We found increasing mechanical fluctuations which break the toroidal symmetry and discuss the evolution of their power spectra for various gel stiffnesses. Our observations are related to single cell studies which explain the mechanical feasibility of the folding process. In addition, we observed switching of cells from a tissue bound to a migrating state after folding failure as well as in tissue injury. We found a supra-cellular actin ring assembled along the toroid's inner edge. Its contraction can lead to the observed folding dynamics as we could confirm by finite element simulations. This actin ring in the inner cell layer is assembled by myosin- driven length fluctuations of supra-cellular α-actin structures (myonemes) in the outer cell-layer.

physics.bio-ph↗