arXiv Science⌕ Search

arXiv subjects

Markus Kästner

Publications and source records attributed to Markus Kästner.

At least 37 records · Page 2Linked to original sources
arXiv2024

Viscoelasticty with physics-augmented neural networks: Model formulation and training methods without prescribed internal variables

We present an approach for the data-driven modeling of nonlinear viscoelastic materials at small strains which is based on physics-augmented neural networks (NNs) and requires only stress and strain paths for training. The model is built on the concept of generalized standard materials and is therefore thermodynamically consistent by construction. It consists of a free energy and a dissipation potential, which can be either expressed by the components of their tensor arguments or by a suitable set of invariants. The two potentials are described by fully/partially input convex neural networks. For training of the NN model by paths of stress and strain, an efficient and flexible training method based on a recurrent cell, particularly a long short-term memory cell, is developed to automatically generate the internal variable(s) during the training process. The proposed method is benchmarked and thoroughly compared with existing approaches. These include a method that obtains the internal variable by integrating the evolution equation over the entire sequence, while the other method uses an an auxiliary feedforward neural network for the internal variable(s). Databases for training are generated by using a conventional nonlinear viscoelastic reference model, where 3D and 2D plane strain data with either ideal or noisy stresses are generated. The coordinate-based and the invariant-based formulation are compared and the advantages of the latter are demonstrated. Afterwards, the invariant-based model is calibrated by applying the three training methods using ideal or noisy stress data. All methods yield good results, but differ in computation time and usability for large data sets. The presented training method based on a recurrent cell turns out to be particularly robust and widely applicable and thus represents a promising approach for the calibration of other types of models as well.

cs.CE↗
arXiv2023

Rate- and temperature-dependent ductile-to-brittle fracture transition: Experimental investigation and phase-field analysis for toffee

The mechanical behaviour of many materials, including polymers or natural materials, significantly depends on the rate of deformation. As a consequence, a rate-dependent ductile-to-brittle fracture transition may be observed. For toffee-like caramel, this effect is particularly pronounced. At room temperature, this confectionery may be extensively deformed at low strain rates, while it can behave highly brittle when the rate of deformation is raised. Likewise, the material behaviour does significantly depend on temperature, and even a slight cooling may cause a significant embrittlement. In this work, a thorough experimental investigation of the rate-dependent deformation and fracture behaviour is presented. In addition, the influence of temperature on the material response is studied. The experimental results form the basis for a phase-field modelling of fracture. In order to derive the governing equations of the model, an incremental variational principle is introduced. By means of the validated model, an analysis of the experimentally observed ductile-to-brittle fracture transition is performed. In particular, the coupling between the highly dissipative deformation behaviour of the bulk material and the rate-dependent fracture resistance is discussed.

cond-mat.mtrl-sci↗
arXiv2023

Assessment of hybrid machine learning models for non-linear system identification of fatigue test rigs

The prediction of system responses for a given fatigue test bench drive signal is a challenging task, for which linear frequency response function models are commonly used. To account for non-linear phenomena, a novel hybrid model is suggested, which augments existing approaches using Long Short-Term Memory networks. Additional virtual sensing applications of this method are demonstrated. The approach is tested using non-linear experimental data from a servo-hydraulic test rig and this dataset is made publicly available. A variety of metrics in time and frequency domains, as well as fatigue strength under variable amplitudes, are employed in the evaluation.

eess.SP↗
arXiv2023

Reconstructing microstructures from statistical descriptors using neural cellular automata

The problem of generating microstructures of complex materials in silico has been approached from various directions including simulation, Markov, deep learning and descriptor-based approaches. This work presents a hybrid method that is inspired by all four categories and has interesting scalability properties. A neural cellular automaton is trained to evolve microstructures based on local information. Unlike most machine learning-based approaches, it does not directly require a data set of reference micrographs, but is trained from statistical microstructure descriptors that can stem from a single reference. This means that the training cost scales only with the complexity of the structure and associated descriptors. Since the size of the reconstructed structures can be set during inference, even extremely large structures can be efficiently generated. Similarly, the method is very efficient if many structures are to be reconstructed from the same descriptor for statistical evaluations. The method is formulated and discussed in detail by means of various numerical experiments, demonstrating its utility and scalability.

cond-mat.mtrl-sci↗
arXiv2023

Neural network-based multiscale modeling of finite strain magneto-elasticity with relaxed convexity criteria

We present a framework for the multiscale modeling of finite strain magneto-elasticity based on physics-augmented neural networks (NNs). By using a set of problem specific invariants as input, an energy functional as the output and by adding several non-trainable expressions to the overall total energy density functional, the model fulfills multiple physical principles by construction, e.g., thermodynamic consistency and material symmetry. Three NN-based models with varying requirements in terms of an extended polyconvexity condition of the magneto-elastic potential are presented. First, polyconvexity, which is a global concept, is enforced via input convex neural networks (ICNNs). Afterwards, we formulate a relaxed local version of the polyconvexity and fulfill it in a weak sense by adding a tailored loss term. As an alternative, a loss term to enforce the weaker requirement of strong ellipticity locally is proposed, which can be favorable to obtain a better trade-off between compatibility with data and physical constraints. Databases for training of the models are generated via computational homogenization for both compressible and quasi-incompressible magneto-active polymers (MAPs). Thereby, to reduce the computational cost, 2D statistical volume elements and an invariant-based sampling technique for the pre-selection of relevant states are used. All models are calibrated by using the database, whereby interpolation and extrapolation are considered separately. Furthermore, the performance of the NN models is compared to a conventional model from the literature. The numerical study suggests that the proposed physics-augmented NN approach is advantageous over the conventional model for MAPs. Thereby, the two more flexible NN models in combination with the weakly enforced local polyconvexity lead to good results, whereas the model based only on ICNNs has proven to be too restrictive.

cs.CE↗
arXiv2023

Fatigue crack growth in anisotropic aluminium sheets -- phase-field modelling and experimental validation

Fatigue crack growth is decisive for the design of thin-walled structures such as fuselage shells of air planes. The cold rolling process, used to produce the aluminium sheets this structure is made of, leads to anisotropic mechanical properties. In this contribution, we simulate the fatigue crack growth with a phase-field model due to its superior ability to model arbitrary crack paths. A fatigue variable based on the Local Strain Approach describes the progressive weakening of the crack resistance. Anisotropy regarding the fracture toughness is included through a structural tensor in the crack surface density. The model is parameterised for an aluminium AA2024-T351 sheet material. Validation with a set of experiments shows that the fitted model can reproduce key characteristics of a growing fatigue crack, including crack path direction and growth rate, considering the rolling direction.

cond-mat.mtrl-sci↗
arXiv2023

Neural networks meet hyperelasticity: A guide to enforcing physics

In the present work, a hyperelastic constitutive model based on neural networks is proposed which fulfills all common constitutive conditions by construction, and in particular, is applicable to compressible material behavior. Using different sets of invariants as inputs, a hyperelastic potential is formulated as a convex neural network, thus fulfilling symmetry of the stress tensor, objectivity, material symmetry, polyconvexity, and thermodynamic consistency. In addition, a physically sensible stress behavior of the model is ensured by using analytical growth terms, as well as normalization terms which ensure the undeformed state to be stress free and with zero energy. In particular, polyconvex, invariant-based stress normalization terms are formulated for both isotropic and transversely isotropic material behavior. By fulfilling all of these conditions in an exact way, the proposed physics-augmented model combines a sound mechanical basis with the extraordinary flexibility that neural networks offer. Thus, it harmonizes the theory of hyperelasticity developed in the last decades with the up-to-date techniques of machine learning. Furthermore, the non-negativity of the hyperelastic neural network-based potentials is numerically examined by sampling the space of admissible deformations states, which, to the best of the authors' knowledge, is the only possibility for the considered nonlinear compressible models. For the isotropic neural network model, the sampling space required for that is reduced by analytical considerations. In addition, a proof for the non-negativity of the compressible Neo-Hooke potential is presented. The applicability of the model is demonstrated by calibrating it on data generated with analytical potentials, which is followed by an application of the model to finite element simulations. In addition, an adaption of the model to noisy data is shown and its [...]

cs.CE↗
arXiv2023

Fast reconstruction of microstructures with ellipsoidal inclusions using analytical descriptors

Microstructure reconstruction is an important and emerging aspect of computational materials engineering and multiscale modeling and simulation. Despite extensive research and fast progress in the field, the application of descriptor-based reconstruction remains limited by computational resources. Common methods for increasing the computational feasibility of descriptor-based microstructure reconstruction lie in approximating the microstructure by simple geometrical shapes and by utilizing differentiable descriptors to enable gradient-based optimization. The present work combines these two ideas for structures composed of non-overlapping ellipsoidal inclusions such as magnetorheological elastomers. This requires to express the descriptors as a function of the microstructure parametrization. Deriving these relations leads to analytical solutions that further speed up the reconstruction procedure. Based on these descriptors, microstructure reconstruction is formulated as a multi-stage optimization procedure. The developed algorithm is validated by means of different numerical experiments and advantages and limitations are discussed in detail.

cond-mat.mtrl-sci↗
arXiv2023

Overview of phase-field models for fatigue fracture in a unified framework

In the last ten years, the phase-field method has gained much attention as a novel method to simulate fracture due to its straightforward way allowing to cover crack initiation and propagation without additional conditions. More recently, it has also been applied to fatigue fracture due to cyclic loading. This publication gives an overview of the main phase-field fatigue models published to date. We present all models in a unified variational framework for best comparability. Subsequently, the models are compared regarding their most important features. It becomes apparent that they can be classified in mainly two categories according to the way fatigue is implemented in the model - that is as a gradual degradation of the fracture toughness or with an additional term in the crack driving force. We aim to provide a helpful guide for choosing the appropriate model for different applications and for developing existing models further.

cond-mat.mtrl-sci↗
arXiv2023

A comparative study on different neural network architectures to model inelasticity

The mathematical formulation of constitutive models to describe the path-dependent, i.e., inelastic, behavior of materials is a challenging task and has been a focus in mechanics research for several decades. There have been increased efforts to facilitate or automate this task through data-driven techniques, impelled in particular by the recent revival of neural networks (NNs) in computational mechanics. However, it seems questionable to simply not consider fundamental findings of constitutive modeling originating from the last decades research within NN-based approaches. Herein, we propose a comparative study on different feedforward and recurrent neural network architectures to model inelasticity. Within this study, we divide the models into three basic classes: black box NNs, NNs enforcing physics in a weak form, and NNs enforcing physics in a strong form. Thereby, the first class of networks can learn constitutive relations from data while the underlying physics are completely ignored, whereas the latter two are constructed such that they can account for fundamental physics, where special attention is paid to the second law of thermodynamics in this work. Conventional linear and nonlinear viscoelastic as well as elastoplastic models are used for training data generation and, later on, as reference. After training with random walk time sequences containing information on stress, strain, and, for some models, internal variables, the NN-based models are compared to the reference solution, whereby interpolation and extrapolation are considered. Besides the quality of the stress prediction, the related free energy and dissipation rate are analyzed to evaluate the models. Overall, the presented study enables a clear recording of the advantages and disadvantages of different NN architectures to model inelasticity and gives guidance on how to train and apply these models.

cs.CE↗
arXiv2023

DA-VEGAN: Differentiably Augmenting VAE-GAN for microstructure reconstruction from extremely small data sets

Microstructure reconstruction is an important and emerging field of research and an essential foundation to improving inverse computational materials engineering (ICME). Much of the recent progress in the field is made based on generative adversarial networks (GANs). Although excellent results have been achieved throughout a variety of materials, challenges remain regarding the interpretability of the model's latent space as well as the applicability to extremely small data sets. The present work addresses these issues by introducing DA-VEGAN, a model with two central innovations. First, a $β$-variational autoencoder is incorporated into a hybrid GAN architecture that allows to penalize strong nonlinearities in the latent space by an additional parameter, $β$. Secondly, a custom differentiable data augmentation scheme is developed specifically for this architecture. The differentiability allows the model to learn from extremely small data sets without mode collapse or deteriorated sample quality. An extensive validation on a variety of structures demonstrates the potential of the method and future directions of investigation are discussed.

cs.LG↗
arXiv2023

Two-stage 2D-to-3D reconstruction of realistic microstructures: Implementation and numerical validation by effective properties

Realistic microscale domains are an essential step towards making modern multiscale simulations more applicable to computational materials engineering. For this purpose, 3D computed tomography scans can be very expensive or technically impossible for certain materials, whereas 2D information can be easier obtained. Based on a single or three orthogonal 2D slices, the recently proposed differentiable microstructure characterization and reconstruction (DMCR) algorithm is able to reconstruct multiple plausible 3D realizations of the microstructure based on statistical descriptors, i.e., without the need for a training data set. Building upon DMCR, this work introduces a highly accurate two-stage reconstruction algorithm that refines the DMCR results under consideration of microstructure descriptors. Furthermore, the 2D-to-3D reconstruction is validated using a real computed tomography (CT) scan of a recently developed beta-Ti/TiFe alloy as well as anisotropic "bone-like" spinodoid structures. After a detailed discussion of systematic errors in the descriptor space, the reconstructed microstructures are compared to the reference in terms of the numerically obtained effective elastic and plastic properties. Together with the free accessibility of the presented algorithms in MCRpy, the excellent results in this study motivate interdisciplinary cooperation in applying numerical multiscale simulations for computational materials engineering.

cond-mat.mtrl-sci↗
arXiv2022

Conditional diffusion-based microstructure reconstruction

Microstructure reconstruction, a major component of inverse computational materials engineering, is currently advancing at an unprecedented rate. While various training-based and training-free approaches are developed, the majority of contributions are based on generative adversarial networks. In contrast, diffusion models constitute a more stable alternative, which have recently become the new state of the art and currently attract much attention. The present work investigates the applicability of diffusion models to the reconstruction of real-world microstructure data. For this purpose, a highly diverse and morphologically complex data set is created by combining and processing databases from the literature, where the reconstruction of realistic micrographs for a given material class demonstrates the ability of the model to capture these features. Furthermore, a fiber composite data set is used to validate the applicability of diffusion models to small data set sizes that can realistically be created by a single lab. The quality and diversity of the reconstructed microstructures is quantified by means of descriptor-based error metrics as well as the Fréchet inception distance (FID) score. Although not present in the training data set, the generated samples are visually indistinguishable from real data to the untrained eye and various error metrics are computed. This demonstrates the utility of diffusion models in microstructure reconstruction and provides a basis for further extensions such as 2D-to-3D reconstruction or application to multiscale modeling and structure-property linkages.

cond-mat.mtrl-sci↗
arXiv2022

Microstructure Characterization and Reconstruction in Python: MCRpy

Microstructure characterization and reconstruction (MCR) is an important prerequisite for empowering and accelerating integrated computational materials engineering. Much progress has been made in MCR recently, however, in absence of a flexible software platform it is difficult to use ideas from other researchers and to develop them further. To address this issue, this work presents MCRpy for easy-to-use, extensible and flexible MCR. The software platform that can be used as a program with graphical user interface, as a command line tool and as a Python library. The central idea is that microstructure reconstruction is formulated as a modular and extensible optimization problem. In this way, any descriptors can be used for characterization and any loss function combining any descriptors can be minimized using any optimizer for reconstruction. With stochastic optimizers, this leads to variations of the well-known Yeong-Torquato algorithm. Furthermore, MCRpy features automatic differentiation, enabling the utilization of gradient-based optimizers. In this work, after a brief introduction to the underlying concepts, the capabilities of MCRpy are demonstrated by exemplarily applying it to typical MCR tasks. Finally, it is shown how to extend MCRpy by defining a new microstructure descriptor and readily using it for reconstruction without additional implementation effort.

cond-mat.mtrl-sci↗
arXiv2022

FE${}^\textbf{ANN}$ $-$ An efficient data-driven multiscale approach based on physics-constrained neural networks and automated data mining

Herein, we present a new data-driven multiscale framework called FE${}^\text{ANN}$ which is based on two main keystones: the usage of physics-constrained artificial neural networks (ANNs) as macroscopic surrogate models and an autonomous data mining process. Our approach allows the efficient simulation of materials with complex underlying microstructures which reveal an overall anisotropic and nonlinear behavior on the macroscale. Thereby, we restrict ourselves to finite strain hyperelasticity problems for now. By using a set of problem specific invariants as the input of the ANN and the Helmholtz free energy density as the output, several physical principles, e.g., objectivity, material symmetry, compatibility with the balance of angular momentum and thermodynamic consistency are fulfilled a priori. The necessary data for the training of the ANN-based surrogate model, i.e., macroscopic deformations and corresponding stresses, are collected via computational homogenization of representative volume elements (RVEs). Thereby, the core feature of the approach is given by a completely autonomous mining of the required data set within an overall loop. In each iteration of the loop, new data are generated by gathering the macroscopic deformation states from the macroscopic finite element (FE) simulation and a subsequently sorting by using the anisotropy class of the considered material. Finally, all unknown deformations are prescribed in the RVE simulation to get the corresponding stresses and thus to extend the data set. The proposed framework consequently allows to reduce the number of time-consuming microscale simulations to a minimum. It is exemplarily applied to several descriptive examples, where a fiber reinforced composite with a highly nonlinear Ogden-type behavior of the individual components is considered.

cs.CE↗
arXiv2022

Phase-field modelling and analysis of rate-dependent fracture phenomena at finite deformation

Fracture of materials with rate-dependent mechanical behaviour, e.g. polymers, is a highly complex process. For an adequate modelling, the coupling between rate-dependent stiffness, dissipative mechanisms present in the bulk material and crack driving force has to be accounted for in an appropriate manner. In addition, the fracture toughness, i.e. the resistance against crack propagation, can depend on rate of deformation. In this contribution, an energetic phase-field model of rate-dependent fracture at finite deformation is presented. For the deformation of the bulk material, a formulation of finite viscoelasticity is adopted with strain energy densities of Ogden type assumed. The unified formulation allows to study different expressions for the fracture driving force. Furthermore, a possibly rate-dependent toughness is incorporated. The model is calibrated using experimental results from the literature for an elastomer and predictions are qualitatively and quantitatively validated against experimental data. Predictive capabilities of the model are studied for monotonic loads as well as creep fracture. Symmetrical and asymmetrical crack patterns are discussed and the influence of a dissipative fracture driving force contribution is analysed. It is shown that, different from ductile fracture of metals, such a driving force is not required for an adequate simulation of experimentally observable crack paths and is not favourable for the description of failure in viscoelastic rubbery polymers. Furthermore, the influence of a rate-dependent toughness is discussed by means of a numerical study. From a phenomenological point of view, it is demonstrated that rate-dependency of resistance against crack propagation can be an essential ingredient for the model when specific effects such as rate-dependent brittle-to-ductile transitions shall be described.

cond-mat.mtrl-sci↗
arXiv2021

Descriptor-based reconstruction of three-dimensional microstructures through gradient-based optimization

Microstructure reconstruction is an important cornerstone to the inverse materials design concept. In this work, a general algorithm is developed to reconstruct a three-dimensional microstructure from given descriptors. Based on two-dimensional (2D) micrographs, this reconstruction algorithm allows valuable insight through spatial visualization of the microstructure and in silico studies of structure-property linkages. The formulation ensures computational efficiency by casting microstructure reconstruction as a gradient-based optimization problem. Herein, the descriptors can be chosen freely, such as spatial correlations or Gram matrices, as long as they are differentiable with respect to the microstructure. Because real microstructure samples are commonly available as 2D microscopy images only, the desired descriptors for the reconstruction process are prescribed on orthogonal 2D slices. This adds a source of noise, which is handled in a new, superior and interpretable manner. The efficiency and applicability of this formulation is demonstrated by various numerical experiments.

cond-mat.mtrl-sci↗
arXiv2021

Microscale simulation of adhesive and cohesive failure in rough interfaces

Multi-material lightweight designs, e.g. the combination of aluminum with fiber-reinforced composites, are a key feature for the development of innovative and resource-efficient products. The connection properties of such bi-material interfaces are influenced by the geometric structure on different length scales. In this article a modeling strategy is presented to study the failure behavior of rough interfaces within a computational homogenization scheme. We study different local phenomena and their effects on the overall interface characteristics, e.g. the surface roughness and different local failure types as cohesive failure of the bulk material and adhesive failure of the local interface. Since there is a large separation in the length scales of the surface roughness, which is in the micrometer range, and conventional structural components, we employ a numerical homogenization approach to extract effective traction-separation laws to derive effective interface parameters. Adhesive interface failure is modeled by cohesive elements based on a traction-separation law and cohesive failure of the bulk material is described by an elastic-plastic model with progressive damage evolution.

cond-mat.mtrl-sci↗