arXiv subjects

Mahbub Hassan

Publications and source records attributed to Mahbub Hassan.

At least 19 recordsLinked to original sources

arXiv2026

LightMat-HP: A Photonic-Electronic System for Accelerating General Matrix Multiplication With Configurable Precision

Matrix multiplication is a fundamental kernel in large-scale artificial intelligence and scientific computing, but its performance on conventional electronic accelerators is increasingly constrained by memory bandwidth and energy efficiency. Photonic computing offers a promising alternative due to its ultra-high bandwidth, massive parallelism, and low power dissipation. However, most existing photonic systems are limited to low-precision computation because of analog optical modulation constraints and noise accumulation, which restricts their applicability in precision-critical workloads. To address this limitation, we propose LightMat-HP, a hybrid photonic-electronic computing system that enables end-to-end acceleration of general matrix multiplication with configurable computational precision. LightMat-HP adopts block floating-point (BFP) arithmetic to reduce computational complexity while enabling flexible precision-performance tradeoffs. To overcome the precision limitations of photonic devices, we propose a slicing-based photonic multiplication scheme that exploits the high accuracy of low bit-width photonic multiplication in combination with digital accumulation to achieve high-precision mantissa multiplication. A tile-based matrix multiplication dataflow is further designed to support matrices of arbitrary sizes. We experimentally validate LightMat-HP on a photonic computing prototype and evaluate its performance through large-scale simulations. The results demonstrate that LightMat-HP outperforms FPGA, GPU, and a state-of-the-art photonic accelerator across throughput, latency, and energy efficiency, particularly for small- and medium-sized matrix multiplications, owing to its highly parallel photonic architecture, efficient data movement, and slice-based BFP arithmetic.

cs.ET↗

arXiv2026

Privacy-Preserving Machine Learning for IoT: A Cross-Paradigm Survey and Future Roadmap

The rapid proliferation of the Internet of Things has intensified demand for robust privacy-preserving machine learning mechanisms to safeguard sensitive data generated by large-scale, heterogeneous, and resource-constrained devices. Unlike centralized environments, IoT ecosystems are inherently decentralized, bandwidth-limited, and latency-sensitive, exposing privacy risks across sensing, communication, and distributed training pipelines. These characteristics render conventional anonymization and centralized protection strategies insufficient for practical deployments. This survey presents a comprehensive IoT-centric, cross-paradigm analysis of privacy-preserving machine learning. We introduce a structured taxonomy spanning perturbation-based mechanisms such as differential privacy, distributed paradigms such as federated learning, cryptographic approaches including homomorphic encryption and secure multiparty computation, and generative synthesis techniques based on generative adversarial networks. For each paradigm, we examine formal privacy guarantees, computational and communication complexity, scalability under heterogeneous device participation, and resilience against threats including membership inference, model inversion, gradient leakage, and adversarial manipulation. We further analyze deployment constraints in wireless IoT environments, highlighting trade-offs between privacy, communication overhead, model convergence, and system efficiency within next-generation mobile architectures. We also consolidate evaluation methodologies, summarize representative datasets and open-source frameworks, and identify open challenges including hybrid privacy integration, energy-aware learning, privacy-preserving large language models, and quantum-resilient machine learning.

cs.LG↗

arXiv2025

Quantifying Geometry Effects on Low-Cost Intelligent Reflecting Surfaces

Intelligent Reflecting Surfaces (IRS) promise low-power coverage extension, yet practical deployments must curb hardware complexity and control overhead. This paper quantifies the performance impact of two cost-saving measures, column-wise element grouping and 1-bit (binary) phase quantization, relative to the ideal fully-controlled, continuous-phase baseline. A single-input single-output link is simulated at 26 GHz (mmWave) across three deployment geometries that vary the relative heights of access point, IRS and user equipment. Results show that switching from continuous to binary phase control reduces median SNR gain by approximately 4 dB, while adopting column-wise grouping introduces a similar penalty; combining both constraints incurs approximately 8 dB loss under height-offset deployments. When all nodes share the same height, the degradation from column-wise control becomes negligible, indicating deployment geometry can offset control-granularity limits. Despite the losses, a 32 x 32 column-wise binary IRS still delivers double-digit SNR gains over the no-IRS baseline in most positions, confirming its viability for cost-constrained scenarios. The study provides quantitative guidelines on when simplified IRS architectures can meet link-budget targets and where full element-wise control remains justified.

cs.ET↗

arXiv2025

A Survey of Earable Technology: Trends, Tools, and the Road Ahead

Earable devices, wearables positioned in or around the ear, are undergoing a rapid transformation from audio-centric accessories into multifunctional systems for interaction, contextual awareness, and health monitoring. This evolution is driven by commercial trends emphasizing sensor integration and by a surge of academic interest exploring novel sensing capabilities. Building on the foundation established by earlier surveys, this work presents a timely and comprehensive review of earable research published since 2022. We analyze over one hundred recent studies to characterize this shifting research landscape, identify emerging applications and sensing modalities, and assess progress relative to prior efforts. In doing so, we address three core questions: how has earable research evolved in recent years, what enabling resources are now available, and what opportunities remain for future exploration. Through this survey, we aim to provide both a retrospective and forward-looking view of earable technology as a rapidly expanding frontier in ubiquitous computing. In particular, this review reveals that over the past three years, researchers have discovered a variety of novel sensing principles, developed many new earable sensing applications, enhanced the accuracy of existing sensing tasks, and created substantial new resources to advance research in the field. Based on this, we further discuss open challenges and propose future directions for the next phase of earable research.

cs.HC↗

arXiv2025

Solar-CSK: Decoding Color Coded Visible Light Communications using Solar Cells

Visible Light Communication (VLC) provides an energy-efficient wireless solution by using existing LED-based illumination for high-speed data transmissions. Although solar cells offer the advantage of simultaneous energy harvesting and data reception, their broadband nature hinders accurate decoding of color-coded signals like Color Shift Keying (CSK). In this paper, we propose a novel approach exploiting the concept of tandem solar cells, multi-layer devices with partial wavelength selectivity, to capture coarse color information without resorting to energy-limiting color filters. To address the residual spectral overlap, we develop a bidirectional LSTM-based machine learning framework that infers channel characteristics by comparing solar cells' photovoltaic signals with pilot-based anchor data. Our commercial off-the-shelf (COTS) solar prototype achieves robust performance across varying distances and ambient lighting levels, significantly reducing bit error rates compared to conventional channel estimation methods. These findings mark a step toward sustainable, high-performance VLC systems powered by the multi-layer solar technologies.

cs.NI↗

arXiv2025

Improving mmWave based Hand Hygiene Monitoring through Beam Steering and Combining Techniques

We introduce BeaMsteerX (BMX), a novel mmWave hand hygiene gesture recognition technique that improves accuracy in longer ranges (1.5m). BMX steers a mmWave beam towards multiple directions around the subject, generating multiple views of the gesture that are then intelligently combined using deep learning to enhance gesture classification. We evaluated BMX using off-the-shelf mmWave radars and collected a total of 7,200 hand hygiene gesture data from 10 subjects performing a six-step hand-rubbing procedure, as recommended by the World Health Organization, using sanitizer, at 1.5m -- over five times longer than in prior works. BMX outperforms state-of-the-art approaches by 31--43% and achieves 91% accuracy at boresight by combining only two beams, demonstrating superior gesture classification in low SNR scenarios. BMX maintained its effectiveness even when the subject was positioned 30 degrees away from the boresight, exhibiting a modest 5% drop in accuracy.

cs.HC↗

arXiv2024

Design of Piezoelectric Metastructures with Multi-Patch Isogeometric Analysis for Enhanced Energy Harvesting and Vibration Suppression

Metastructures are engineered systems composed of periodic arrays of identical components, called resonators, designed to achieve specific dynamic effects, such as creating a band gap-a frequency range where waves cannot propagate through the structure. When equipped with patches of piezoelectric material, these metastructures exhibit an additional capability: they can harvest energy effectively even from frequencies much lower than the fundamental frequency of an individual resonator. This energy harvesting capability is particularly valuable for applications where low-frequency vibrations dominate. To support the design of metastructures for dual purposes, such as energy harvesting and vibration suppression (reducing unwanted oscillations in the structure), we develop a multi-patch isogeometric model of a piezoelectric energy harvester. This model is based on a piezoelectric Kirchhoff-Love plate-a thin, flexible structure with embedded piezoelectric patches-and uses Nitsche's method to enforce compatibility conditions in terms of displacement, rotations, shear force, and bending moments across the boundaries of different patches. The model is validated against experimental and numerical data from the literature. We then present a novel, parameterized metastructure plate design and conduct a parametric study to explore how resonator geometries affect key performance metrics, including the location and width of the band gap and the position of the first peak in the voltage frequency response function. This model can be integrated with optimization algorithms to maximize outcomes such as energy harvesting efficiency or vibration reduction, depending on application needs.

cs.CE↗

arXiv2024

LightLLM: A Versatile Large Language Model for Predictive Light Sensing

We propose LightLLM, a model that fine tunes pre-trained large language models (LLMs) for light-based sensing tasks. It integrates a sensor data encoder to extract key features, a contextual prompt to provide environmental information, and a fusion layer to combine these inputs into a unified representation. This combined input is then processed by the pre-trained LLM, which remains frozen while being fine-tuned through the addition of lightweight, trainable components, allowing the model to adapt to new tasks without altering its original parameters. This approach enables flexible adaptation of LLM to specialized light sensing tasks with minimal computational overhead and retraining effort. We have implemented LightLLM for three light sensing tasks: light-based localization, outdoor solar forecasting, and indoor solar estimation. Using real-world experimental datasets, we demonstrate that LightLLM significantly outperforms state-of-the-art methods, achieving 4.4x improvement in localization accuracy and 3.4x improvement in indoor solar estimation when tested in previously unseen environments. We further demonstrate that LightLLM outperforms ChatGPT-4 with direct prompting, highlighting the advantages of LightLLM's specialized architecture for sensor data fusion with textual prompts.

cs.LG↗

arXiv2024

Towards High-Speed Passive Visible Light Communication with Event Cameras and Digital Micro-Mirrors

Passive visible light communication (VLC) modulates light propagation or reflection to transmit data without directly modulating the light source. Thus, passive VLC provides an alternative to conventional VLC, enabling communication where the light source cannot be directly controlled. There have been ongoing efforts to explore new methods and devices for modulating light propagation or reflection. The state-of-the-art has broken the 100 kbps data rate barrier for passive VLC by using a digital micro-mirror device (DMD) as the light modulating platform, or transmitter, and a photo-diode as the receiver. We significantly extend this work by proposing a massive spatial data channel framework for DMDs, where individual channels can be decoded in parallel using an event camera at the receiver. For the event camera, we introduce event processing algorithms to detect numerous channels and decode bits from individual channels with high reliability. Our prototype, built with off-the-shelf event cameras and DMDs, can decode up to $\sim$2,000 parallel channels, achieving a data transmission rate of 1.6 Mbps, markedly surpassing current benchmarks by 16x.

cs.NI↗

arXiv2024

Mitigating Automotive Radar Interference using Onboard Intelligent Reflective Surface

The use of automotive radars is gaining popularity as a means to enhance a vehicle's sensing capabilities. However, these radars can suffer from interference caused by transmissions from other radars mounted on nearby vehicles. To address this issue, we investigate the use of an onboard intelligent reflective surface (IRS) to artificially increase a vehicle's effective radar cross section (RCS), or its "electromagnetic visibility." Our proposed method utilizes the IRS's ability to form a coherent reflection of the incident radar waveform back towards the source radar, thereby improving radar performance under interference. We evaluated both passive and active IRS options. Passive IRS, which does not support reflection amplification, was found to be counter-productive and actually decreased the vehicle's effective RCS instead of enhancing it. In contrast, active IRS, which can amplify the reflection power of individual elements, effectively combats all types of automotive radar interference when the reflective elements are configured with a 15-35 dB reflection gain.

eess.SP↗

arXiv2024

A New Architecture for Energy Efficient Fault Detection Using Energy Harvesters

The current battery-powered fault detection system for vibration monitoring has a rather limited lifetime. This is because the high-frequency sampling (typically tens of kilo-Hertz) required for vibration monitoring results in high energy consumption in both the analog-to-digital (ADC) converter and wireless transmissions. This paper proposes a new fault detection architecture that can significantly reduce the energy consumption of the ADC and wireless transmission. Our inspiration for the new architecture is based on the observation that the many tens of thousand of data samples collected for fault detection are ultimately transformed into a small number of features. If we can generate these features directly without high frequency sampling, then we can avoid the the energy cost for ADC and wireless transmissions. We propose to use piezoelectric energy harvesters (which can be designed to have different frequency responses) and integrators to obtain these features in an energy-efficient manner. By using a publicly available data set for ball bearing fault detection (which was originally sampled at 51.2kHz) and piezoelectric energy harvester models, we can produce features, which when sampled at 0.33Hz, give a fault detection accuracy of 89% while reducing the sampling requirement by 4 orders-of-magnitude.

eess.SP↗

arXiv2023

Optimal design of Piezoelectric Energy Harvesters for bridge infrastructure: Effects of Location and Traffic Intensity on Energy Production

Piezoelectric energy harvesters (PEHs) can be used as an additional power supply for a Structural Health Monitoring (SHM) system. Its design can be optimised for the best performance; however, the optimal design depends on the input vibration, e.g. acceleration of a bridge due to wind loads and passing traffic. In previous studies, we have shown that optimal design tunes to some predominant frequency of the signal spectrum. However, our previous study was limited to a single location of a PEH on a bridge. In this work, we extend the rigorous optimisation framework to include the effect of the PEH's location. The optimisation framework uses the PEH plate model discretised by IsoGeometric Analysis (IGA) and coupled with the Particle Swarm Optimisation algorithm to find the designs with maximum energy outputs for many acceleration histories, extracted from the recorded dynamic response data of a real cable-stayed bridge in Australia. Then, clustering is performed to find several best candidates for the entire bridge. An additional study is performed to quantify the effect of traffic intensity on the produced energy. It is shown that variation in traffic volume throughout the 24hr time window leads to variation in optimal PEH designs. The study concludes the impact of location and traffic on energy harvesting by identifying the optimal PEH design and placement throughout the bridge structure. The results indicate that the key factors of maximising energy harvesting efficiency are related to the input excitation and the mode of vibration being excited. The position of maximum displacement in the vibration mode corresponds to the best location for energy harvesting. Also, the change in traffic intensity affects the amount of convertible mechanical energy and also directs the fundamental frequency of a PEH to shift within a specific range of frequencies to achieve the highest energy conversion.

math.NA↗

arXiv2022

Spectral-Loc: Indoor Localization using Light Spectral Information

For indoor settings, we investigate the impact of location on the spectral distribution of the received light, i.e., the intensity of light for different wavelengths. Our investigations confirm that even under the same light source, different locations exhibit slightly different spectral distribution due to reflections from their localised environment containing different materials or colours. By exploiting this observation, we propose Spectral-Loc, a novel indoor localization system that uses light spectral information to identify the location of the device. With spectral sensors finding their way in latest products and applications, such as white balancing in smartphone photography, Spectral-Loc can be readily deployed without requiring any additional hardware or infrastructure. We prototype Spectral-Loc using a commercial-off-the-shelf light spectral sensor, AS7265x, which can measure light intensity over 18 different wavelength sub-bands. We benchmark the localisation accuracy of Spectral-Loc against the conventional light intensity sensors that provide only a single intensity value. Our evaluations over two different indoor spaces, a meeting room and a large office space, demonstrate that use of light spectral information significantly reduces the localization error for the different percentiles.

cs.HC↗

arXiv2022

Design optimisation of piezoelectric energy harvesters for bridge infrastructure

Vibrational energy harvested from the bridge excitation due to the traffic flow or the wind load can be supplied to sensors in a Structural Health Monitoring (SHM) system and help prolong its service life, reduce chemical battery waste and enable its use in remote locations. A common approach to designing a Piezoelectric Energy Harvester (PEH) consists in tuning its fundamental frequency to some target value (e.g., the fundamental frequency of a bridge). However, such approach does not answer the question if the chosen target frequency is optimal, and does not take into account the possibility to have multiple design configurations with the same fundamental frequency. In this work, we approach the problem of a PEH design optimisation in a rigorous way, using a PEH model based on the Kirchhoff-Love plate theory and Isogeometric Analysis (IGA), coupled with the Modal Order Reduction (MOR) approach and Runge-Kutta time integration method. The model is further equipped with the Particle Swarm Optimisation (PSO) algorithm that allows finding geometry which maximises energy output from a given base acceleration signal. A comprehensive study is conducted to infer the impact of a PEH geometry on its energy harvesting performance in a real-world setting by considering field health monitoring data of a large-scale cable-stayed bridge in NSW, Australia. A shape optimisation framework is developed based on acceleration events, i.e., where the level of response exceeds a certain threshold. Designs obtained in the event-based optimisation are then clustered to propose several best candidates for continuous energy generation. This work represents the first study on PEH design optimisation for real operational conditions.

cs.CE↗

arXiv2022

On the Joint Optimization of Energy Harvesting and Sensing of Piezoelectric Energy Harvesters: Case Study of a Cable-Stayed Bridge

Piezoelectric Energy Harvesters (PEHs) are typically employed to provide additional source of energy for a sensing system. However, studies show that a PEH can be also used as a sensor to acquire information about the source of vibration by analysing the produced voltage signal. This opens a possibility to create Simultaneous Energy Harvesting and Sensing (SEHS) system, where a single piece of hardware, a PEH, acts as both, a harvester and as a sensor. This raises a question if it is possible to design a bi-functional PEH device with optimal harvesting and sensing performance. In this work, we propose a bi-objective PEH design optimisation framework and show that there is a trade-off between energy harvesting efficiency and sensing accuracy within a PEH design space. The proposed framework is based on an extensive vibration (strain and acceleration) dataset collected from a real-world operational cable-stayed bridge in New South Wales, Australia. The bridge acceleration data is used as an input for a PEH numerical model to simulate a voltage signal and estimate the amount of produced energy. The numerical PEH model is based on the Kirchhoff-Love plate and isogeometric analysis. For sensing, convolutional neural network AlexNet is trained to identify traffic speed labels from voltage CWT (Continuous Wavelet Transform) images. In order to improve computational efficiency of the approach, a kriging metamodel is built and genetic algorithm is used as an optimisation method. The results are presented in the form of Pareto fronts in three design spaces.

cs.CE↗

arXiv2022

Path Planning for the Dynamic UAV-Aided Wireless Systems using Monte Carlo Tree Search

For UAV-aided wireless systems, online path planning attracts much attention recently. To better adapt to the real-time dynamic environment, we, for the first time, propose a Monte Carlo Tree Search (MCTS)-based path planning scheme. In details, we consider a single UAV acts as a mobile server to provide computation tasks offloading services for a set of mobile users on the ground, where the movement of ground users follows a Random Way Point model. Our model aims at maximizing the average throughput under energy consumption and user fairness constraints, and the proposed timesaving MCTS algorithm can further improve the performance. Simulation results show that the proposed algorithm achieves a larger average throughput and a faster convergence performance compared with the baseline algorithms of Q-learning and Deep Q-Network.

cs.NI↗

arXiv2021

Analyzing the Impact of Molecular Re-Radiation on the MIMO Capacity in High-Frequency Bands

In this paper, we show how the absorption and re-radiation energy from molecules in the air can influence the Multiple Input Multiple Output (MIMO) performance in high-frequency bands, e.g., millimeter wave (mmWave) and terahertz. In more detail, some common atmosphere molecules, such as oxygen and water, can absorb and re-radiate energy in their natural resonance frequencies, such as 60 GHz, 180 GHz and 320 GHz. Hence, when hit by electromagnetic waves, molecules will get excited and absorb energy, which leads to an extra path loss and is known as molecular attenuation. Meanwhile, the absorbed energy will be re-radiated towards a random direction with a random phase. These re-radiated waves also interfere with the signal transmission. Although, the molecular re-radiation was mostly considered as noise in literature, recent works show that it is correlated to the main signal and can be viewed as a composition of multiple delayed or scattered signals. Such a phenomenon can provide non-line-of-sight (NLoS) paths in an environment that lacks scatterers, which increases spatial multiplexing and thus greatly enhances the performance of MIMO systems. Therefore in this paper, we explore the scattering model and noise models of molecular re-radiation to characterize the channel transfer function of the NLoS channels created by atmosphere molecules. Our simulation results show that the re-radiation can increase MIMO capacity up to 3 folds in mmWave and 6 folds in terahertz for a set of realistic transmit power, distance, and antenna numbers. We also show that in the high SNR, the re-radiation makes the open-loop precoding viable, which is an alternative to beamforming to avoid beam alignment sensitivity in high mobility applications.

cs.NI↗

arXiv2020

Deep Learning for Radio-based Human Sensing: Recent Advances and Future Directions

While decade-long research has clearly demonstrated the vast potential of radio frequency (RF) for many human sensing tasks, scaling this technology to large scenarios remained problematic with conventional approaches. Recently, researchers have successfully applied deep learning to take radio-based sensing to a new level. Many different types of deep learning models have been proposed to achieve high sensing accuracy over a large population and activity set, as well as in unseen environments. Deep learning has also enabled detection of novel human sensing phenomena that were previously not possible. In this survey, we provide a comprehensive review and taxonomy of recent research efforts on deep learning based RF sensing. We also identify and compare several publicly released labeled RF sensing datasets that can facilitate such deep learning research. Finally, we summarize the lessons learned and discuss the current limitations and future directions of deep learning based RF sensing.

eess.SP↗