arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2303.03620

Optimal design of Piezoelectric Energy Harvesters for bridge infrastructure: Effects of Location and Traffic Intensity on Energy Production

Shaui Yao·Patricio Peralta-Braz·Mehri Makki Alamdari·Rafael O. Ruiz·Elena Atroshchenko·Mahbub Hassan
View original source ↗Read source document ↗Export metadata ↓

Abstract

Piezoelectric energy harvesters (PEHs) can be used as an additional power supply for a Structural Health Monitoring (SHM) system. Its design can be optimised for the best performance; however, the optimal design depends on the input vibration, e.g. acceleration of a bridge due to wind loads and passing traffic. In previous studies, we have shown that optimal design tunes to some predominant frequency of the signal spectrum. However, our previous study was limited to a single location of a PEH on a bridge. In this work, we extend the rigorous optimisation framework to include the effect of the PEH's location. The optimisation framework uses the PEH plate model discretised by IsoGeometric Analysis (IGA) and coupled with the Particle Swarm Optimisation algorithm to find the designs with maximum energy outputs for many acceleration histories, extracted from the recorded dynamic response data of a real cable-stayed bridge in Australia. Then, clustering is performed to find several best candidates for the entire bridge. An additional study is performed to quantify the effect of traffic intensity on the produced energy. It is shown that variation in traffic volume throughout the 24hr time window leads to variation in optimal PEH designs. The study concludes the impact of location and traffic on energy harvesting by identifying the optimal PEH design and placement throughout the bridge structure. The results indicate that the key factors of maximising energy harvesting efficiency are related to the input excitation and the mode of vibration being excited. The position of maximum displacement in the vibration mode corresponds to the best location for energy harvesting. Also, the change in traffic intensity affects the amount of convertible mechanical energy and also directs the fundamental frequency of a PEH to shift within a specific range of frequencies to achieve the highest energy conversion.

Explore related subjects

math.NAcs.NA

Keep this discovery

BibTeXRIS

Shaui Yao, Patricio Peralta-Braz, Mehri Makki Alamdari, Rafael O. Ruiz, Elena Atroshchenko, Mahbub Hassan. 2023-03-07. Optimal design of Piezoelectric Energy Harvesters for bridge infrastructure: Effects of Location and Traffic Intensity on Energy Production. https://arxiv.org/abs/2303.03620

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Stress-divergence, Laplacian, and rotational forms of the incompressible Navier--Stokes equations with variable viscosity

In the Navier--Stokes equations, incompressibility allows rewriting the viscous term in various forms leading to distinct numerical properties and flow descriptions. Furthermore, models accounting for non-Newtonian, thermal or turbulent effects often break the constant-viscosity assumption, thereby producing additional consistency terms. In this context, the present work compares the classical symmetric-gradient diffusion term with more recent variable-viscosity generalizations of the Laplacian and rotational forms. We discuss, analyze and test their differences with respect to implementation, efficiency, numerical stability and outflow boundary conditions. With a focus on time-dependent flows, we consider second-order implicit-explicit (IMEX) temporal discretizations aimed at improving efficiency and numerical stability. Through a rigorous stability analysis, we show how selected explicit treatments can bypass algorithmic nonlinearities without inducing CFL conditions. Our numerical results highlight important differences between the three viscous formulations---especially in the presence of outflow boundaries, for which the generalized Laplacian form proves more suitable in diffusion-dominated regimes. %(as widely known for constant viscosity).

math.NA↗
arXiv2026

Full-window branch discovery and loss-selected EnKF continuation for data assimilation

We develop a framework for offline full-window branch discovery, optionally followed by online continuation with an ensemble Kalman filter (EnKF). Three mechanisms drive the branch search: adjoint path-kernel (APK) differentiation balances kernel differentiation and correction-stabilized path perturbation, shifting the optimization from exploration to exploitation; an optimized Gaussian initial law broadens the search over initial-state basins; and loss-weighted mixing across independent runs recombines successful path components. We may then select an interior state using a local loss and continue online with an EnKF. In 40-dimensional Lorenz-96 experiments, the mean offline path RMSE of APK is 4.3 times smaller than that of population weak-$\mathrm{4D\text{-}Var}_x$. The resulting APK-EnKF method has a mean online RMSE 64 times smaller than that of ordinary EnKF.

math.NA↗
arXiv2026

A variational physics-informed graph neural network for heterogeneous solid mechanics

Stress localization in heterogeneous solids is governed by the bimaterial interface, where the displacement field remains $C^0$-continuous, while in-plane stresses jump due to the stiffness mismatch. Coordinate-based physics-informed neural networks (PINNs) represent this jump via a prescribed regularization width or a weighted interface penalty, making their accuracy sensitive to how phase-contrast changes are handled. This work presents a variational, label-free physics-informed graph neural network (PI-GNN) in which the heterogeneity is carried by the discretization rather than by the trial field. The solver operates on a conforming adaptive mesh graph, assigns constitutive behavior per element, and minimizes the discrete total potential energy as a single unweighted objective in which only first derivatives appear. The discrete energy on piecewise-linear elements coincides with the finite element (FE) Ritz functional. Dirichlet conditions are enforced by construction, with no penalty term, no interface weight, and no prescribed transition width. Using one fixed architecture, optimizer, and loss across small-strain elasticity and finite-strain Neo-Hookean hyperelasticity in two and three dimensions, the von Mises error remains below $3.58\%$ across a stiffness-contrast sweep spanning $(E_{\mathrm{inc}}/E_{\mathrm{mat}}\in[10^{-2},10^{2}])$, where a strong-form PINN degrades to $5.58\%$, and its displacement error reaches $7.66\%$ against $0.49\%$ for the PI-GNN. A trained network halves the ($\sigma_{xx}$) error of an energy-based PINN ($5.01\%$ versus $10.94\%$). Training cost exceeds a single FE solve by more than an order of magnitude, so the construction is a variationally consistent, penalty-free interface representation for parametric surrogates and inverse identification rather than a replacement for a one-off FE analysis.

math.NA↗