arXiv subjects

M. Costa

Publications and source records attributed to M. Costa.

At least 19 recordsLinked to original sources

arXiv2025

Infrared emission from $z \sim 6.5$ quasar host galaxies: a direct estimate of dust physical properties

Quasars at the dawn of Cosmic Time ($z>6$) are fundamental probes to investigate the early co-evolution of supermassive black holes and their host galaxy. Nevertheless, their infrared spectral energy distribution remains at the present time poorly constrained, due to the limited photometric coverage probing the far-infrared wavelength range where the dust modified black-body is expected to peak ($\sim80$ $\mathrm{\mu m}$). Here we present a study of the high-frequency dust emission via a dedicated ALMA Band 8 ($\sim$400 GHz) campaign targeting 11 quasar host galaxies at $6<z<7$. Combined with archival observations in other ALMA bands, this program enables a detailed characterization of their infrared emission, allowing for the derivation of dust masses ($M_{d}$), dust emissivity indexes ($\beta$), dust temperatures ($T_{d}$), infrared luminosities ($L_{IR}$), and associated star formation rates (SFRs). Our analysis confirms that dust temperature is on average higher in this sample (34-65 K) if compared to local main-sequence galaxies' values, and that this finding can be linked to the increased star formation efficiency we derive in our work, as also suggested by the [CII]$_{158\mu m}$ deficit. Most remarkably, we note that the average value of $T_d$ of this sample doesn't differ from the one that is observed in luminous, ultra-luminous and hyper-luminous infrared galaxies at different redshifts that show no signs of hosting a quasar. Finally, our findings suggest that the presence of a bright AGN does not significantly bias the derived infrared properties, although further high-frequency, high-spatial resolution observations might reveal more subtle impacts on sub-kiloparsec scales.

astro-ph.GA↗

arXiv2025

Recovering the Dust Mass Budget with PRIMA

Achieving a complete picture of galaxy evolution is a primary goal of extragalactic astrophysics. To accomplish this ambitious task, a wealth of multi-wavelength surveys have been devoted to assess the cosmic evolution of the cold gas and of the stellar mass across cosmic time. In this cosmic census, one elusive component is represented by interstellar dust. In this work, we exploit the IR mission PRIMA (covering wavelengths from 24 $\mu$m to 235 $\mu$m) to perform a deep survey (1000h on 1 deg$^2$) aimed at estimating the still poorly known dust mass function (DMF) at $z \sim 0.5 - 5$. We consider the spectro-photometric realization of the SPRITZ simulation and we compute the dust masses using single temperature Modified Grey Body functions. We show how PRIMA alone, thanks to its unprecedented sensitivities, will constrain the DMF at $z < 1.5$, in terms of mass and faint-end slope. At $z > 1.5$, we stress the key synergy with current or future sub-millimeter facilities, such as the JCMT/SCUBA-2, AtLAST, LMT and ALMA telescopes, that will allow us to probe the R$-$J regime of PRIMA selected galaxies. Finally, PRIMA, thanks to its large photometric coverage, will be able for the first time to constrain strictly the warm dust properties of a two component dust model.

astro-ph.GA↗

arXiv2025

Astro-COLIBRI: Empowering Citizen Scientists in Multi-Messenger Astrophysics

In the era of real-time astronomy, citizen scientists play an increasingly important role in the discovery and follow-up of transient astrophysical phenomena. From local astronomical societies to global initiatives, amateur astronomers contribute valuable observational data that complement professional efforts. Astro-COLIBRI facilitates these contributions by providing a user-friendly platform that integrates real-time alerts, data visualization tools, and collaborative features to support astronomers at all levels. The Astro-COLIBRI Citizen Science Program provides engagement opportunities across multiple scales. At the grassroots level, we collaborate with local astronomy clubs, equipping them with accessible tools for transient event monitoring. National and international networks, such as RAPAS in France, leverage Astro-COLIBRI's real-time capabilities for coordinated observations. On a global scale, we actively participate in high-impact citizen science and capacity building initiatives, including the International Astronomical Union (IAU) Citizen Science Program and the "Open Universe" initiative led by the United Nations Office for Outer Space Affairs (UNOOSA). These collaborations enhance the accessibility of real-time astrophysical data and foster inclusive participation in cutting-edge astronomy. In this contribution, we will present the Astro-COLIBRI Citizen Science Program, highlighting its technical framework, community impact, and case studies of successful amateur contributions. We will showcase how our platform facilitates the rapid exchange of information between professional and amateur astronomers, democratizing access to multi-messenger astrophysics and enabling the global community to contribute meaningfully to time-domain discoveries.

astro-ph.IM↗

arXiv2025

Astro-COLIBRI: A Comprehensive Platform for Real-Time Multi-Messenger Astrophysics

The detection of transient phenomena such as Gamma-Ray Bursts (GRBs), Fast Radio Bursts (FRBs), stellar flares, novae, and supernovae, alongside novel cosmic messengers like high-energy neutrinos and gravitational waves, has transformed astrophysics in recent years. Maximizing the discovery potential of multi-messenger and multi-wavelength follow-up observations, as well as serendipitous detections, requires a tool that rapidly compiles and contextualizes relevant information for each new event. We present Astro-COLIBRI, an advanced platform designed to meet this challenge. Astro-COLIBRI integrates a public RESTful API, real-time databases, a cloud-based alert system, and user-friendly clients (a website and mobile apps for iOS and Android). It processes astronomical alerts from multiple streams in real time, filtering them based on user-defined criteria and placing them in their multi-wavelength and multi-messenger context. The platform offers intuitive data visualization, a quick summary of relevant event properties, and an assessment of observing conditions at numerous observatories worldwide. We here describe its architecture, data resources, and main functionalities. We highlight the automatic collection of photometric data from a variety of large scale optical surveys, a recently added feature that significantly improves the capabilities of the Astro-COLIBRI platform.

astro-ph.IM↗

arXiv2025

Four-quark operators with $\Delta F = 2$ in the GIRS scheme

We calculate the mixing matrices of four-quark operators that change flavor numbers by two units. Our approach employs two schemes: the coordinate-space Gauge Invariant Renormalization Scheme (GIRS) and the Modified Minimal Subtraction scheme. From our perturbative computations, we extract the conversion factors between these two renormalization schemes at the next-to-leading order. A significant challenge in the study of four-quark operators is that they mix among themselves upon renormalization. Additionally, computations in GIRS at a given order in perturbation theory require Feynman diagrams with at least one additional loop. The extraction of the conversion factors involves calculating two-point Green's functions, which include products of two four-quark operators, and three-point Green's functions, which involve one four-quark operator and two bilinear operators, with all operators located at distinct spacetime points. We investigate both parity-conserving and parity-violating four-quark operators. This calculation is relevant to the determination of Cabibbo-Kobayashi-Maskawa (CKM) matrix elements from numerical simulations using the GIRS scheme.

hep-lat↗

arXiv2024

Supersymmetric QCD on the lattice: Fine-tuning and counterterms for the Yukawa and quartic couplings

In this study, we determine the fine-tuning of parameters in $\mathcal{N} = 1$ Supersymmetric QCD, discretized on a Euclidean lattice. Our focus is on the renormalization of Yukawa (gluino-quark-squark interactions) and quartic (four-squark interactions) couplings. Given that SUSY is broken on the lattice, non-supersymmetric counterterms must be added to the discretized Lagrangian, with coefficients which must be appropriately fine-tuned in order to recover SUSY in the continuum limit. To deduce the renormalization factors and the coefficients of the counterterms, we compute the relevant three-point (for the Yukawa couplings) and four-point Green's functions (for the quartic couplings) perturbatively to one-loop and to the lowest order in lattice spacing. Both dimensional and lattice regularizations are used to implement the Modified Minimal Subtraction scheme. Our lattice formulation employs the Wilson discretization for gluino and quark fields, the Wilson gauge action for gluons, and naive discretization for squark fields. One main difficulty in this study lies in the fact that different components of squark fields mix among themselves at the quantum level. Consequently, for an appropriate fine-tuning of the couplings, these mixings must be taken into account in the renormalization conditions. All Green's functions and renormalization factors exhibit an explicit dependence on the number of colors, $N_c$, the number of flavors, $N_f$, and the gauge parameter, $\alpha$, which are left unspecified. This work follows previous investigations on SQCD and finalizes the one-loop fine-tuning of the SQCD action on the lattice, paving the way for numerical simulations of SQCD.

hep-lat↗

arXiv2024

Interim report for the International Muon Collider Collaboration (IMCC)

The International Muon Collider Collaboration (IMCC) [1] was established in 2020 following the recommendations of the European Strategy for Particle Physics (ESPP) and the implementation of the European Strategy for Particle Physics-Accelerator R&D Roadmap by the Laboratory Directors Group [2], hereinafter referred to as the the European LDG roadmap. The Muon Collider Study (MuC) covers the accelerator complex, detectors and physics for a future muon collider. In 2023, European Commission support was obtained for a design study of a muon collider (MuCol) [3]. This project started on 1st March 2023, with work-packages aligned with the overall muon collider studies. In preparation of and during the 2021-22 U.S. Snowmass process, the muon collider project parameters, technical studies and physics performance studies were performed and presented in great detail. Recently, the P5 panel [4] in the U.S. recommended a muon collider R&D, proposed to join the IMCC and envisages that the U.S. should prepare to host a muon collider, calling this their "muon shot". In the past, the U.S. Muon Accelerator Programme (MAP) [5] has been instrumental in studies of concepts and technologies for a muon collider.

physics.acc-ph↗

arXiv2024

Gauge-invariant renormalization of four-quark operators

We study the renormalization of four-quark operators in one-loop perturbation theory. We employ a coordinate-space Gauge-Invariant Renormalization Scheme (GIRS), which can be advantageous compared to other schemes, especially in nonperturbative lattice investigations. From our perturbative calculations, we extract the conversion factors between GIRS and the modified Minimal Subtraction scheme ($\overline{\rm MS}$) at the next-to-leading order. A formidable issue in the study of the four-quark operators is that operators with different Dirac matrices mix among themselves upon renormalization. We focus on both parity-conserving and parity-violating four-quark operators, which change flavor numbers by two units ($\Delta F = 2$). The extraction of the conversion factors entails the calculation of two-point Green's functions involving products of two four-quark operators, as well as three-point Green's functions with one four-quark and two bilinear operators. The significance of our results lies in their potential to refine our understanding of QCD phenomena, offering insights into the precision of Cabibbo-Kobayashi-Maskawa (CKM) matrix elements and shedding light on the nonperturbative treatment of complex mixing patterns associated with four-quark operators.

hep-lat↗

arXiv2024

First test beam measurement of the 4D resolution of an RSD 450 microns pitch pixel matrix connected to a FAST2 ASIC

This paper reports on the spatial and temporal resolutions of an RSD 450 microns pitch pixels array measured at the DESY test beam facility. RSDs, Resistive Silicon Detectors, also known as AC-LGAD, achieve excellent position and temporal resolution by exploiting charge sharing among neighboring electrodes. The RSD matrix used in this study is part of the second FBK RSD production, RSD2, and it is composed of 450 microns pitch pixel with cross-shaped electrodes. A 7-pixel matrix was read out by the FAST2 ASIC, a 16-channel amplifier fully custom ASIC developed by INFN Torino using the 110 nm CMOS technology. The total area covered by the matrix is about 1.5 mm$^2$. The position resolution reached in this test is 15 microns, about 4\% of the pitch. The temporal resolution achieved in this work is 60 ps, dominated by the FAST2 resolution. The work also demonstrates that RSD sensors with cross-shaped electrodes achieve 100% fill factor and homogenous resolutions over the whole matrix surface, making them a suitable choice for 4D tracking applications.

physics.ins-det↗

arXiv2023

Renormalization of the Yukawa and Quartic Couplings in $\mathcal{N} = 1$ Supersymmetric QCD

In this work we perform calculations in order to determine the renormalization factors and the mixing coefficients of the Yukawa and the quartic couplings in $\mathcal{N} = 1$ Supersymmetric QCD. The Yukawa couplings describe the interactions between gluino, quark and squark fields whereas the quartic couplings describe four-squark interactions. We discretize the action on a Euclidean lattice using the Wilson formulation for the gluino, quark and gluon fields; for squark fields (scalar fields) we employ na\"ive discretization. At the quantum level Yukawa and quartic interactions suffer from mixing with other operators which have the same transformation properties. Exploiting parity and charge conjugation symmetries of the Supersymmetric QCD action, we reduce the allowed mixing patterns. We compute, perturbatively to one-loop and to the lowest order in the lattice spacing, the relevant three-point Green's functions so as to fine tune the Yukawa couplings and the relevant four-point Green's functions to fine tune the quartic couplings. We use both dimensional and lattice regularizations as required for implementing the Modified Minimal Subtraction scheme ($\overline{\rm MS}$).

hep-lat↗

arXiv2023

Resistive Read-out in Thin Silicon Sensors with Internal Gain

Two design innovations, low-gain avalanche (Low-Gain Avalance Diode, LGAD) and resistive read-out (Resistive Silicon Detector, RSD), have brought strong performance improvements to silicon sensors. Large signals, due to the added gain mechanism, lead to improved temporal precision, while charge sharing, introduced by resistive read-out, allows for achieving excellent spatial resolution even with large pixels. LGAD- and RSD- based silicon sensors are now adopted, or considered, in several future experiments and are the basis for almost every next 4D-trackers. New results obtained with sensors belonging to the second FBK production of RSD (RSD2) demonstrate how a combined resolution of 30 ps and 30 \microns can be obtained with pixels as large as $1 \times 1 $ mm$^2$.

physics.ins-det↗

arXiv2022

High-Precision 4D Tracking with Large Pixels using Thin Resistive Silicon Detectors

The basic principle of operation of silicon sensors with resistive read-out is built-in charge sharing. Resistive Silicon Detectors (RSD, also known as AC-LGAD), exploiting the signals seen on the electrodes surrounding the impact point, achieve excellent space and time resolutions even with very large pixels. In this paper, a TCT system using a 1064 nm picosecond laser is used to characterize sensors from the second RSD production at the Fondazione Bruno Kessler. The paper first introduces the parametrization of the errors in the determination of the position and time coordinates in RSD, then outlines the reconstruction method, and finally presents the results. Three different pixel sizes are used in the analysis: 200 x 340, 450 x 450, and 1300 x 1300 microns^2. At gain = 30, the 450 x 450 microns^2 pixel achieves a time jitter of 20 ps and a spatial resolution of 15 microns concurrently, while the 1300 x 1300 microns^2 pixel achieves 30 ps and 30 micron, respectively. The implementation of cross-shaped electrodes improves considerably the response uniformity over the pixel surface.

physics.ins-det↗

arXiv2022

Fine-Tuning of the Yukawa and Quartic Couplings in Supersymmetric QCD

In this work, we investigate the fine tuning of parameters in $\mathcal{N} = 1$ Supersymmetric QCD, discretized on a Euclidean lattice. Specifically, we study the renormalization of the Yukawa (gluino-quark-squark interactions) and the quartic (four-squark interactions) couplings. At the quantum level, these interactions suffer from mixing with other operators which have the same transformation properties. We exploit the symmetries of the action, such as charge conjugation and parity, in order to reduce the allowed mixing patterns. To deduce the renormalizations and the mixing coefficients we compute, perturbatively to one-loop and to the lowest order in the lattice spacing, the relevant three-point and four-point Green's functions using both dimensional and lattice regularizations. Our lattice formulation involves the Wilson discretization for the gluino and quark fields; for gluons we employ the Wilson gauge action; for scalar fields (squarks) we use na\"ive discretization. We obtain analytic expressions for the renormalization and mixing coefficients of the Yukawa couplings; they are functions of the number of colors $N_c$, the gauge parameter $\alpha$, and the gauge coupling $g$. Furthermore, preliminary results on the quartic couplings are also presented.

hep-lat↗

arXiv2022

Muon Collider Forum Report

A multi-TeV muon collider offers a spectacular opportunity in the direct exploration of the energy frontier. Offering a combination of unprecedented energy collisions in a comparatively clean leptonic environment, a high energy muon collider has the unique potential to provide both precision measurements and the highest energy reach in one machine that cannot be paralleled by any currently available technology. The topic generated a lot of excitement in Snowmass meetings and continues to attract a large number of supporters, including many from the early career community. In light of this very strong interest within the US particle physics community, Snowmass Energy, Theory and Accelerator Frontiers created a cross-frontier Muon Collider Forum in November of 2020. The Forum has been meeting on a monthly basis and organized several topical workshops dedicated to physics, accelerator technology, and detector R&D. Findings of the Forum are summarized in this report.

hep-ex↗

arXiv2022

DC-coupled resistive silicon detectors for 4-D tracking

In this work, we introduce a new design concept: the DC-Coupled Resistive Silicon Detectors, based on the LGAD technology. This new approach intends to address a few known features of the first generation of AC-Coupled Resistive Silicon Detectors (RSD). Our simulation exploits a fast hybrid approach based on a combination of two packages, Weightfield2 and LTSpice. It demonstrates that the key features of the RSD design are maintained, yielding excellent timing and spatial resolutions: a few tens of ps and a few microns. In the presentation, we will outline the optimization methodology and the results of the simulation. We will present detailed studies on the effect of changing the ratio between the n+ layer resistivity and the low-resistivity ring and on the achievable temporal and spatial resolution.

physics.ins-det↗

arXiv2022

4D Tracking: Present Status and Perspective

The past ten years have seen the advent of silicon-based precise timing detectors for charged particle tracking. The underlying reason for this evolution is a design innovation: the Low-Gain Avalanche Diode (LGAD). In its simplicity, the LGAD design is an obvious step with momentous consequences: low gain leads to large signals maintaining sensors stability and low noise, allowing sensor segmentation. Albeit introduced for a different reason, to compensate for charge trapping in irradiated silicon sensors, LGAD found fertile ground in the design of silicon-based timing detectors. Spurred by this design innovation, solid-state-based timing detectors for charged particles are going through an intense phase of R&D, and hybrid and monolithic sensors, with or without internal gain, are being explored. This contribution offers a review of this booming field.

hep-ex↗

arXiv2022

First experimental results of the spatial resolution of RSD pad arrays read out with a 16-ch board

Resistive Silicon Detectors (RSD, also known as AC-LGAD) are innovative silicon sensors, based on the LGAD technology, characterized by a continuous gain layer that spreads across the whole sensor active area. RSDs are very promising tracking detectors, thanks to the combination of the built-in signal sharing with the internal charge multiplication, which allows large signals to be seen over multiple read-out channels. This work presents the first experimental results obtained from a 3$\times$4 array with 200~\mum~pitch, coming from the RSD2 production manufactured by FBK, read out with a 16-ch digitizer. A machine learning model has been trained, with experimental data taken with a precise TCT laser setup, and then used to predict the laser shot positions, finding a spatial resolution of $\sim$~5.5~\mum.

physics.ins-det↗

arXiv2022

Design of the ELIMAIA ion collection system

A system of permanent magnet quadrupoles (PMQs) is going to be realized by INFNLNS to be used as a collection system for the injection of laser driven ion beams up to 60 AMeV in an energy selector based on four resistive dipoles. This system is the first element of the ELIMED (ELI-Beamlines MEDical and Multidisciplinary applications) beam transport, dosimetry and irradiation line that will be developed by INFN-LNS (It) and installed at the ELI-Beamlines facility in Prague (Cz). ELIMED will be the first users open transport beam-line where a controlled laser-driven ion beam will be used for multidisciplinary researches. The definition of well specified characteristics, both in terms of performances and field quality, of the magnetic lenses is crucial for the system realization, for the accurate study of the beam dynamics and for the proper matching with the magnetic selection system which will be designed in the next months. Here, we report the design of the collection system and the adopted solutions in order to realize a robust system form the magnetic point of view. Moreover, the first preliminary transport simulations are also described.

physics.acc-ph↗