arXiv subjects

Lu Wang

Publications and source records attributed to Lu Wang.

425 records · Page 24Linked to original sources

arXiv2013

MoS2/MX2 heterobilayers: Bandgap engineering via tensile strain or external electrical field

We have performed a comprehensive first-principles study of the electronic and magnetic properties of two-dimensional (2D) transition-metal dichalcogenide (TMD) heterobilayers MX2/MoS2 (M = Mo, Cr, W, Fe, V; X = S, Se). For M = Mo, Cr, W; X=S, Se, all heterobilayers show semiconducting characteristics with an indirect bandgap with the exception of the WSe2/MoS2 heterobilayer which retains the direct-band-gap character of the constituent monolayer. For M = Fe, V; X = S, Se, the MX2/MoS2 heterobilayers exhibit metallic characters. Particular attention of this study has been focused on engineering bandgap of the TMD heterobilayer materials via application of either a tensile strain or an external electric field. We find that with increasing either the biaxial or uniaxial tensile strain, the MX2/MoS2 (M=Mo, Cr, W; X=S, Se) heterobilayers can undergo a semiconductor-to-metal transition. For the WSe2/MoS2 heterobilayer, a direct-to-indirect bandgap transition may occur beyond a critical biaxial or uniaxial strain. For M (=Fe, V) and X (=S, Se), the magnetic moments of both metal and chalcogen atoms are enhanced when the MX2/MoS2 heterobilayers are under a biaxial tensile strain. Moreover, the bandgap of MX2/MoS2 (M=Mo, Cr, W; X=S, Se) heterobilayers can be reduced by the electric field. For two heterobilayers MSe2/MoS2 (M=Mo, Cr), PBE calculations suggest that the indirect-to-direct bandgap transition may occur under an external electric field. The transition is attributed to the enhanced spontaneous polarization. The tunable bandgaps in general and possible indirect-direct bandgap transitions due to tensile strain or external electric field endow the TMD heterobilayer materials a viable candidate for optoelectronic applications.

cond-mat.mes-hall↗

arXiv2013

Rigidity of asymptotically conical shrinking gradient Ricci solitons

We show that if two gradient Ricci solitons are asymptotic along some end of each to the same regular cone, then the soliton metrics must be isometric on some neighborhoods of infinity of these ends. Our theorem imposes no restrictions on the behavior of the metrics off of the ends in question and in particular does not require their geodesic completeness. As an application, we prove that the only complete connected gradient shrinking Ricci soliton asymptotic to a rotationally symmetric cone is the Gaussian soliton on R^n.

math.DG↗

arXiv2013

Evaluation of imaging protocol for ECT based on CS image reconstruction algorithm

SPECT (Single-photon Emission Computerized Tomography) and PET (Positron Emission Tomography) are essential medical imaging tools, for which the sampling angle number, scan time should be chosen carefully to compromise between image quality and the radiopharmaceutical dose. In this study, the image quality of different acquisition protocol was evaluated via varied angle number and count number per angle with Monte Carlo simulation data. It was shown that when similar imaging counts were used, the factor of acquisition counts was more important than that of the sampling number in ECT (Emission Computerized Tomography). To further reduce the activity requirement and the scan duration, an iterative image reconstruction algorithm for limited-view and low-dose tomography based on compressed sensing theory has been developed. The total variation regulation was added in the reconstruction process to improve SNR (Signal to Noise Ratio) and reduce the artifacts caused by the limited angle sampling. Maximization of maximum likelihood of the estimated image and the measured data and minimization of the total variation of the image are alternative implemented. By using this advanced algorithm, the reconstruction process is able to achieve image quality matching or exceeding that of normal scan with only half of the injection radiopharmaceutical dose.

physics.med-ph↗

arXiv2013

Tunable band gap in few-layer graphene by surface adsorption

There is a tunable band gap in ABC-stacked few-layer graphene (FLG) via applying a vertical electric field, but the operation of FLG-based field effect transistor (FET) requires two gates to create a band gap and tune channel's conductance individually. Using first principle calculations, we propose an alternative scheme to open a band gap in ABC-stacked FLG namely via single-side adsorption. The band gap is generally proportional to the charge transfer density. The capability to open a band gap of metal adsorption decreases in this order: K/Al > Cu/Ag/Au > Pt. Moreover, we find that even the band gap of ABA-stacked FLG can be opened if the bond symmetry is broken. Finally, a single-gated FET based on Cu-adsorbed ABC-stacked trilayer graphene is simulated. A clear transmission gap is observed, which is comparable with the band gap. This renders metal-adsorbed FLG a promising channel in a single-gated FET device.

cond-mat.mes-hall↗

arXiv2013

Interfacial Properties of Bilayer and Trilayer Graphene on Metal Substrates

One popular approach to prepare graphene is to grow them on transition metal substrates via chemical vapor deposition. By using the density functional theory with dispersion correction, we systematically investigate for the first time the interfacial properties of bilayer (BLG) and trilayer graphene (TLG) on metal substrates. Three categories of interfacial structures are revealed. The adsorption of B(T)LG on Al, Ag, Cu, Au, and Pt substrates is a weak physisorption, but a band gap can be opened. The adsorption of B(T)LG on Ti, Ni, and Co substrates is a strong chemisorption, and a stacking-insensitive band gap is opened for the two uncontacted layers of TLG. The adsorption of B(T)LG on Pd substrate is a weaker chemisorption, with a band gap opened for the uncontacted layers. This fundamental study also helps for B(T)LG device study due to inevitable graphene/metal contact.

cond-mat.mtrl-sci↗

arXiv2012

A Parallel Auxiliary Grid AMG Method for GPU

In this paper, we develop a new parallel auxiliary grid algebraic multigrid (AMG) method to leverage the power of graphic processing units (GPUs). In the construction of the hierarchical coarse grid, we use a simple and fixed coarsening procedure based on a region quadtree generated from an auxiliary grid. This allows us to explicitly control the sparsity patterns and operator complexities of the AMG solver. This feature provides (nearly) optimal load balancing and predictable communication patterns, which makes our new algorithm suitable for parallel computing, especially on GPU. We also design a parallel smoother based on the special coloring of the quadtree to accelerate the convergence rate and improve the parallel performance of this solver. Based on the CUDA toolkit [40], we implemented our new parallel auxiliary grid AMG method on GPU and the numerical results of this implementation demonstrate the efficiency of our new method. The results achieve an average speedup of over 4 on quasi-uniform grids and 2 on shape regular grids when compared to the AMG implementation in CUSP.

math.NA↗

arXiv2011

Uniqueness of Self-similar Shrinkers with Asymptotically Conical Ends

Let $C\subset\mathbb{R}^{n+1}$ be a regular cone with vertex at the origin. In this paper, we show the uniqueness for smooth properly embedded self-shrinking ends in $\mathbb{R}^{n+1}$ that are asymptotic to $C$. As an application, we prove that not every regular cone with vertex at the origin has a smooth complete properly embedded self-shrinker asymptotic to it.

math.DG↗

arXiv2010

Harmonic map heat flow with rough boundary data

Let $B_1$ be the unit open disk in $\Real^2$ and $M$ be a closed Riemannian manifold. In this note, we first prove the uniqueness for weak solutions of the harmonic map heat flow in $H^1([0,T]\times B_1,M)$ whose energy is non-increasing in time, given initial data $u_0\in H^1(B_1,M)$ and boundary data $γ=u_0|_{\partial B_1}$. Previously, this uniqueness result was obtained by Rivière (when $M$ is the round sphere and the energy of initial data is small) and Freire (when $M$ is an arbitrary closed Riemannian manifold), given that $u_0\in H^1(B_1,M)$ and $γ=u_0|_{\partial B_1}\in H^{3/2}(\partial B_1)$. The point of our uniqueness result is that no boundary regularity assumption is needed. Second, we prove the exponential convergence of the harmonic map heat flow, assuming that energy is small at all times.

math.DG↗

arXiv2009

A Bernstein Type Theorem For Self-similar Shrinkers

In this note, we prove that smooth self-shrinkers in $\Real^{n+1}$, that are entire graphs, are hyperplanes. Previously Ecker and Huisken showed that smooth self-shrinkers, that are entire graphs and have at most polynomial growth, are hyperplanes. The point of this note is that no growth assumption at infinity is needed.

math.DG↗

arXiv2009

Existence of Good Sweepouts on Closed Manifolds

In this note we establish estimates for the harmonic map heat flow from $S^1$ into a closed manifold, and use it to construct sweepouts with the following good property: each curve in the tightened sweepout, whose energy is close to the maximal energy of curves in the sweepout, is itself close to a closed geodesic.

math.DG↗

arXiv2005

Limitations of Nanotechnology for Atom Interferometry

Do van der Waals interactions determine the smallest nanostructures that can be used for atom optics? This question is studied with regard to the problem of designing an atom interferometer with optimum sensitivity to de Broglie wave phase shifts. The optimum sensitivity to acceleration and rotation rates is also considered. For these applications we predict that nanostructures with a period smaller than 40 nm will cause atom interferometers to perform poorly because van der Waals interactions adversely affect how nanostructure gratings work as beam-splitters.

physics.atom-ph↗