arXiv subjects

Long Wang

Publications and source records attributed to Long Wang.

At least 109 records · Page 6Linked to original sources

arXiv2024

Narrowband parallel coherent LiDAR with frequency interleaving

The high demand for 3D imaging in intelligent robotics is motivating the advances of coherent LiDARs towards high performances with low complexity/cost. However, the current coherent LiDARs suffer from the tight coupling between the high ranging-imaging performance and the high complexity/cost. Herein, we propose a narrowband parallel coherent LiDAR with frequency-interleaving architecture. The LiDAR architecture utilizes narrowband signals for ranging, and interleaves multi-channel sparse and narrowband signals in frequency domain at the receiving end to significantly reduce the required bandwidth and the number of detection branches, facilitating massive parallelization with low system complexity/cost. In experiments, a ranging precision of 0.49 mm that approaches the shot noise limit, and a power sensitivity of -95 dBm (~9 photons) are achieved. Parallel 3D imaging with an equivalent imaging rate of 10 Mpixel/s and a 2 cm ranging precision is also demonstrated using only two 150 MHz receiving branches. With these desirable properties, this new LiDAR opens an avenue for the LiDAR ecosystem.

physics.optics↗

arXiv2024

New insight of time-transformed symplectic integrator I: hybrid methods for hierarchical triples

Accurate $N$-body simulations of multiple systems such as binaries and triples are essential for understanding the formation and evolution of interacting binaries and binary mergers, including gravitational wave sources, blue stragglers and X-ray binaries. The logarithmic time-transformed explicit symplectic integrator (LogH), also known as algorithmic regularization, is a state-of-the-art method for this purpose.However, we show that this method is accurate for isolated Kepler orbits because of its ability to trace Keplerian trajectories, but much less accurate for hierarichal triple systems. The method can lead to an unphysical secular evolution of inner eccentricity in Kozal-Lidov triples, despite a small energy error. We demonstrate that hybrid methods, which apply LogH to the inner binary and alternative methods to the outer bodies, are significantly more effective, though not symplectic. Additionally, we introduce a more efficient hybrid method, BlogH, which eliminates the need for time synchronization and is time symmetric. The method is implemented in the few-body code SDAR. We explore suitable criteria for switching between the LogH and BlogH methods for general triple systems. These hybrid methods have the potential to enhance the integration performance of hierarchial triples.

astro-ph.IM↗

arXiv2024

ALKPU: an active learning method for the DeePMD model with Kalman filter

Neural network force field models such as DeePMD have enabled highly efficient large-scale molecular dynamics simulations with ab initio accuracy. However, building such models heavily depends on the training data obtained by costly electronic structure calculations, thereby it is crucial to carefully select and label the most representative configurations during model training to improve both extrapolation capability and training efficiency. To address this challenge, based on the Kalman filter theory we propose the Kalman Prediction Uncertainty (KPU) to quantify uncertainty of the model's prediction. With KPU we design the Active Learning by KPU (ALKPU) method, which can efficiently select representative configurations that should be labelled during model training. We prove that ALKPU locally leads to the fastest reduction of model's uncertainty, which reveals its rationality as a general active learning method. We test the ALKPU method using various physical system simulations and demonstrate that it can efficiently coverage the system's configuration space. Our work demonstrates the benefits of ALKPU as a novel active learning method, enhancing training efficiency and reducing computational resource demands.

physics.comp-ph↗

arXiv2024

Global Challenge for Safe and Secure LLMs Track 1

This paper introduces the Global Challenge for Safe and Secure Large Language Models (LLMs), a pioneering initiative organized by AI Singapore (AISG) and the CyberSG R&D Programme Office (CRPO) to foster the development of advanced defense mechanisms against automated jailbreaking attacks. With the increasing integration of LLMs in critical sectors such as healthcare, finance, and public administration, ensuring these models are resilient to adversarial attacks is vital for preventing misuse and upholding ethical standards. This competition focused on two distinct tracks designed to evaluate and enhance the robustness of LLM security frameworks. Track 1 tasked participants with developing automated methods to probe LLM vulnerabilities by eliciting undesirable responses, effectively testing the limits of existing safety protocols within LLMs. Participants were challenged to devise techniques that could bypass content safeguards across a diverse array of scenarios, from offensive language to misinformation and illegal activities. Through this process, Track 1 aimed to deepen the understanding of LLM vulnerabilities and provide insights for creating more resilient models.

cs.CR↗

arXiv2024

Unveiling the Binary Nature of NGC 2323

As a well-known open cluster, NGC 2323 (also called M50) has been widely investigated for over a hundred years and has always been considered a classical single cluster. In this work, with the help of Gaia DR3, we study the binary structure nature of this cluster. Although indistinguishable in the spatial space, the small but undeniable difference in the proper motion indicates that they may be two individual clusters. After investigating the properties of the two clusters, it is found that they have very close positions (three-dimensional $Δ$pos = 12.3 pc, $σ_{Δ\mathrm{pos}} = 3.4$ pc) and similar tangential velocities (two-dimensional $Δ$V = 2.2 km s$^{-1}$, $σ_{Δ\mathrm{V}} = 0.02$ km s$^{-1}$), indicating the existence of their physical association. Moreover, the best isochrone fitting ages of the two clusters are the same (158 Myr), further proving their possibly common origin. To comprehensively understand the formation and evolution of this binary cluster, we employ the PETAR $N$-body code to trace back their birthplace and deduce their dynamical evolutionary fate. With observational mean cluster properties, the simulations suggest that they may form together, and then orbit each other as a binary cluster for over 200 Myr. After that, because of their gradual mass loss, the two clusters will eventually separate and evolve into two independent clusters. Meanwhile, the numerical $N$-body simulation suggests that the less massive cluster is unlikely to be the cluster tidal tails created by the differential rotation of the Milky Way.

astro-ph.GA↗

arXiv2024

LoD-Loc: Aerial Visual Localization using LoD 3D Map with Neural Wireframe Alignment

We propose a new method named LoD-Loc for visual localization in the air. Unlike existing localization algorithms, LoD-Loc does not rely on complex 3D representations and can estimate the pose of an Unmanned Aerial Vehicle (UAV) using a Level-of-Detail (LoD) 3D map. LoD-Loc mainly achieves this goal by aligning the wireframe derived from the LoD projected model with that predicted by the neural network. Specifically, given a coarse pose provided by the UAV sensor, LoD-Loc hierarchically builds a cost volume for uniformly sampled pose hypotheses to describe pose probability distribution and select a pose with maximum probability. Each cost within this volume measures the degree of line alignment between projected and predicted wireframes. LoD-Loc also devises a 6-DoF pose optimization algorithm to refine the previous result with a differentiable Gaussian-Newton method. As no public dataset exists for the studied problem, we collect two datasets with map levels of LoD3.0 and LoD2.0, along with real RGB queries and ground-truth pose annotations. We benchmark our method and demonstrate that LoD-Loc achieves excellent performance, even surpassing current state-of-the-art methods that use textured 3D models for localization. The code and dataset are available at https://victorzoo.github.io/LoD-Loc.github.io/.

cs.CV↗

arXiv2024

Merging Hierarchical Triple Black Hole Systems with Intermediate-mass Black Holes in Population III Star Clusters

Theoretical predictions suggest that very massive stars have the potential to form through multiple collisions and eventually evolve into intermediate-mass black holes (IMBHs) within Population III star clusters embedded in mini dark matter haloes. In this study, we investigate the long-term evolution of Population III star clusters, including models with a primordial binary fraction of $f_{\rm b}=0$ and 1, using the $N$-body simulation code PETAR. We comprehensively examine the phenomenon of hierarchical triple black holes in the clusters, specifically focusing on their merging inner binary black holes (BBHs), with post-Newtonian correction, by using the TSUNAMI code. Our findings suggest a high likelihood of the inner BBHs containing IMBHs with masses on the order of $\mathcal{O}(100)M_{\odot}$, and as a result, their merger rate could be up to $0.1{\rm Gpc}^{-3}{\rm yr}^{-3}$. The orbital eccentricities of some merging inner BBHs oscillate over time periodically, known as the Kozai-Lidov oscillation, due to dynamical perturbations. Detectable merging inner BBHs for mHz GW detectors LISA/TianQin/Taiji concentrate within $z<3$. More distant sources would be detectable for CE/ET/LIGO/KAGRA/DECIGO, which are sensitive from $\mathcal{O}(0.1)$Hz to $\mathcal{O}(100)$Hz. Furthermore, compared with merging isolated BBHs, merging inner BBHs affected by dynamical perturbations from tertiary BHs tend to have higher eccentricities, with a significant fraction of sources with eccentricities closing to 1 at mHz bands. GW observations would help constrain formation channels of merging BBHs, whether through isolated evolution or dynamical interaction, by examining eccentricities.

astro-ph.GA↗

arXiv2024

Optimal Position Detection of an Optically Levitated Mie Particle

We theoretically investigate the problem of position detection of an optically levitated Mie particle. The information radiation field (IRF) is proposed and defined to characterize the scattered light carrying complete information about the center-of-mass (c.m.) motion of the particle. Based on the IRF, we suggest an optimal detection scheme for the position of arbitrary particles. We calculate both the information losses of objective collection and mode-matching in levitated optomechanical experiments. Our results conclude that the backward detection scheme, using an incident Gaussian beam focused by a high numerical aperture lens, provides sufficient information to achieve the quantum ground state through cooling of the three-dimensional c.m. motion of the Mie particle.

physics.optics↗

arXiv2024

Design, Kinematics, and Deployment of a Continuum Underwater Vehicle-Manipulator System

Underwater vehicle-manipulator systems (UVMSs) are underwater robots equipped with one or more manipulators to perform intervention missions. This paper provides the mechanical, electrical, and software design of a novel UVMS equipped with a continuum manipulator, referred to as a continuum-UVMS. A kinematic model for the continuum-UVMS is derived in order to build an algorithm to resolve the robot's redundancy and generate joint space commands. Different methods to optimize the trajectory for specific tasks are proposed using both the weighted least norm solution and the gradient projection method. Kinematic simulation results are analyzed to assess the performance of the proposed algorithm. Finally, the continuum-UVMS is deployed in an experimental demonstration in which both teleoperation and autonomous control are tested for a given reference trajectory.

cs.RO↗

arXiv2024

A High-Fidelity Simulation Framework for Grasping Stability Analysis in Human Casualty Manipulation

Recently, there has been a growing interest in rescue robots due to their vital role in addressing emergency scenarios and providing crucial support in challenging or hazardous situations where human intervention is difficult. However, very few of these robots are capable of actively engaging with humans and undertaking physical manipulation tasks. This limitation is largely attributed to the absence of tools that can realistically simulate physical interactions, especially the contact mechanisms between a robotic gripper and a human body. In this letter, we aim to address key limitations in current developments towards robotic casualty manipulation. Firstly, we present an integrative simulation framework for casualty manipulation. We adapt a finite element method (FEM) tool into the grasping and manipulation scenario, and the developed framework can provide accurate biomechanical reactions resulting from manipulation. Secondly, we conduct a detailed assessment of grasping stability during casualty grasping and manipulation simulations. To validate the necessity and superior performance of the proposed high-fidelity simulation framework, we conducted a qualitative and quantitative comparison of grasping stability analyses between the proposed framework and the state-of-the-art multi-body physics simulations. Through these efforts, we have taken the first step towards a feasible solution for robotic casualty manipulation.

cs.RO↗

arXiv2024

Teleoperation in Robot-assisted MIS with Adaptive RCM via Admittance Control

This paper presents the development and assessment of a teleoperation framework for robot-assisted minimally invasive surgery (MIS). The framework leverages our novel integration of an adaptive remote center of motion (RCM) using admittance control. This framework operates within a redundancy resolution method specifically designed for the RCM constraint. We introduce a compact, low-cost, and modular custom-designed instrument module (IM) that ensures integration with the manipulator, featuring a force-torque sensor, a surgical instrument, and an actuation unit for driving the surgical instrument. The paper details the complete teleoperation framework, including the telemanipulation trajectory mapping, kinematic modelling, control strategy, and the integrated admittance controller. Finally, the system capability to perform various surgical tasks was demonstrated, including passing a thread through the rings, picking and placing objects, and trajectory tracking.

cs.RO↗

arXiv2024

Arithmetic degrees and Zariski dense orbits of cohomologically hyperbolic maps

A dominant rational self-map on a projective variety is called $p$-cohomologically hyperbolic if the $p$-th dynamical degree is strictly larger than other dynamical degrees. For such a map defined over $\overline{\mathbb{Q}}$, we study lower bounds of the arithmetic degrees, existence of points with Zariski dense orbit, and finiteness of preperiodic points. In particular, we prove that, if $f$ is an $1$-cohomologically hyperbolic map on a smooth projective variety, then (1) the arithmetic degree of a $\overline{\mathbb{Q}}$-point with generic $f$-orbit is equal to the first dynamical degree of $f$; and (2) there are $\overline{\mathbb{Q}}$-points with generic $f$-orbit. Applying our theorem to the recently constructed rational map with transcendental dynamical degree, we confirm that the arithmetic degree can be transcendental.

math.AG↗

arXiv2024

Generating Synthetic Computed Tomography for Radiotherapy: SynthRAD2023 Challenge Report

Radiation therapy plays a crucial role in cancer treatment, necessitating precise delivery of radiation to tumors while sparing healthy tissues over multiple days. Computed tomography (CT) is integral for treatment planning, offering electron density data crucial for accurate dose calculations. However, accurately representing patient anatomy is challenging, especially in adaptive radiotherapy, where CT is not acquired daily. Magnetic resonance imaging (MRI) provides superior soft-tissue contrast. Still, it lacks electron density information while cone beam CT (CBCT) lacks direct electron density calibration and is mainly used for patient positioning. Adopting MRI-only or CBCT-based adaptive radiotherapy eliminates the need for CT planning but presents challenges. Synthetic CT (sCT) generation techniques aim to address these challenges by using image synthesis to bridge the gap between MRI, CBCT, and CT. The SynthRAD2023 challenge was organized to compare synthetic CT generation methods using multi-center ground truth data from 1080 patients, divided into two tasks: 1) MRI-to-CT and 2) CBCT-to-CT. The evaluation included image similarity and dose-based metrics from proton and photon plans. The challenge attracted significant participation, with 617 registrations and 22/17 valid submissions for tasks 1/2. Top-performing teams achieved high structural similarity indices (>0.87/0.90) and gamma pass rates for photon (>98.1%/99.0%) and proton (>97.3%/97.0%) plans. However, no significant correlation was found between image similarity metrics and dose accuracy, emphasizing the need for dose evaluation when assessing the clinical applicability of sCT. SynthRAD2023 facilitated the investigation and benchmarking of sCT generation techniques, providing insights for developing MRI-only and CBCT-based adaptive radiotherapy.

physics.med-ph↗

arXiv2024

Simulations predict intermediate-mass black hole formation in globular clusters

Intermediate-mass black holes (IMBHs) are those between 100 and 10$^5$ solar masses ($M_{\odot}$); their formation process is debated. One possible origin is the growth of less massive black holes (BHs) via mergers with stars and compact objects within globular clusters (GCs). However, previous simulations have indicated that this process only produces IMBHs $<500 M_{\odot}$ because the gravitational wave recoil ejects them when they merge with other BHs. We perform star-by-star simulations of GC formation, finding that high-density star formation in a GC's parent giant molecular cloud can produce sufficient mergers of massive stars to overcome that mass threshold. We conclude that GCs can form with IMBHs $\gtrsim 10^3 M_{\odot}$, which is sufficiently massive to be retained within the GC even with the expected gravitational wave recoil.

astro-ph.GA↗

arXiv2024

Compact Binary Formation in Open Star Clusters II: Difficulty of Gaia NS formation in low-mass star clusters

Gaia mission offers opportunities to search for compact binaries not involved in binary interactions (hereafter inert compact binaries), and results in the discoveries of binaries containing one black hole (BH) or one neutron star (NS), called "Gaia BHs" and "Gaia NSs", respectively. We have assessed if Gaia BHs and NSs can be formed in open clusters through dynamical interactions. In order to obtain a large number of inert compact binaries similar to Gaia BHs and NSs, we have performed gravitational $N$-body simulations for a large number of open clusters whose total mass is $1.2 \times 10^8 M_\odot$. These clusters have various masses, metallicities, densities, and binary fractions. We have found that open clusters form Gaia BHs ($10^{-6}$-$10^{-5} M_\odot^{-1}$) much more efficiently than Gaia NSs ($\lesssim 10^{-7} M_\odot^{-1}$) for any cluster parameters. This is quite inconsistent with observational results, because the reported numbers of Gaia BHs and NSs are $3$ and $21$, respectively. Additionally, we have switched off NS natal kicks for $10^4$ open clusters each weighing $10^3 M_\odot$ in order to retain a large number of NSs in open clusters. Then, open clusters form inert NS binaries originating from primordial binaries rather than formed through dynamical interactions. This means that Gaia NSs are formed dominantly on isolated fields, not in open clusters, if there is no NS natal kick. We have concluded that Gaia BHs can be dominantly formed in open clusters, however Gaia NSs cannot.

astro-ph.SR↗

arXiv2024

The Origin of Young Stellar Populations in NGC 1783: Accretion of External Stars

The presence of young stellar populations in the Large Magellanic Cloud cluster NGC 1783 has caught significant attention, with suggestions ranging from it being a genuine secondary stellar generation to a population of blue straggler stars or simply contamination from background stars. Thanks to multi-epoch observations with the Hubble Space Telescope, proper motions for stars within the field of NGC 1783 have been derived, thus allowing accurate cluster membership determination. Here, we report that the younger stars within NGC 1783 indeed belong to the cluster, and their spatial distribution is more extended compared to the bulk of the older stellar population, consistent with previous studies. Through N-body simulations, we demonstrate that the observed characteristics of the younger stars cannot be explained solely by blue straggler stars in the context of the isolated dynamical evolution of NGC 1783. Instead, accretion of the external, low-mass stellar system can better account for both the inverse spatial concentration and the radial velocity isotropy of the younger stars. We propose that NGC 1783 may have accreted external stars from low-mass stellar systems, resulting in a mixture of external younger stars and blue straggler stars from the older bulk population, thereby accounting for the characteristics of the younger sequence.

astro-ph.SR↗

arXiv2024

A nano vacuum gauge based on second-order coherence in optical levitation

Accurate measurement of pressure with a wide dynamic range holds significant importance for various applications. This issue can be realized with a mechanical nano-oscillator, where the pressure-related collisions with surrounding molecules induce its energy dissipation. However, this energy dissipation of the nano-oscillator may be overshadowed by other processes. Here, we apply the second-order coherence analysis to accurately characterize those distinct dissipation processes. Based on an optically levitated nano-oscillator, we successfully obtain precise measurements of the air pressure surrounding the particles from atmosphere to 7E-6 mbar, over 8 orders of magnitude. It proves that the mechanical nano-oscillator is an extremely promising candidate for precision pressure sensing applications. Moreover, the second-order coherence analysis method on a classical system can pave the way to characterize the dynamic properties of an oscillator, which will benefit microscopic thermodynamics, precision measurement, and macroscopic quantum research.

physics.optics↗

arXiv2024

Admittance Control for Adaptive Remote Center of Motion in Robotic Laparoscopic Surgery

In laparoscopic robot-assisted minimally invasive surgery, the kinematic control of the robot is subject to the remote center of motion (RCM) constraint at the port of entry (e.g., trocar) into the patient's body. During surgery, after the instrument is inserted through the trocar, intrinsic physiological movements such as the patient's heartbeat, breathing process, and/or other purposeful body repositioning may deviate the position of the port of entry. This can cause a conflict between the registered RCM and the moved port of entry. To mitigate this conflict, we seek to utilize the interaction forces at the RCM. We develop a novel framework that integrates admittance control into a redundancy resolution method for the RCM kinematic constraint. Using the force/torque sensory feedback at the base of the instrument driving mechanism (IDM), the proposed framework estimates the forces at RCM, rejects forces applied on other locations along the instrument, and uses them in the admittance controller. In this paper, we report analysis from kinematic simulations to validate the proposed framework. In addition, a hardware platform has been completed, and future work is planned for experimental validation.

cs.RO↗