arXiv subjects

Kaoru Hisama

Publications and source records attributed to Kaoru Hisama.

11 recordsLinked to original sources

arXiv2026

MLIP Detective: Active Failure Mode Discovery Beyond Benchmark Scores for Machine-Learning Interatomic Potentials

Universal machine-learning interatomic potentials (u-MLIPs) aim to generalize across diverse configurations. Benchmarks enable reproducible evaluation but may not expose failures outside their predefined scope. Here, we show that physics-informed search can complement benchmark-based evaluation by uncovering hidden failure modes. We introduce MLIP Detective, an agentic framework for active failure mode discovery. Starting from benchmark evidence, MLIP Detective generates falsifiable, physics-informed failure hypotheses, screens them with inexpensive simulations, and escalates only the most suspicious cases to human experts together with proposed verification protocols. Without issue-specific prompting, MLIP Detective identified and characterized a systematic anomaly in MACE-MPA-0: the model predicted some relaxed adsorbate-surface systems involving O- or F-containing adsorbates to be higher in energy than their corresponding separated fragments. Using cross-model comparisons, MLIP Detective further inferred a likely training-data origin for the anomaly, consistent with recent reports.

cs.LG↗

arXiv2026

Structures of iron and cobalt bimetallic clusters for optimized chemical vapor deposition growth of single-walled carbon nanotubes

We investigate iron-cobalt (Fe-Co) alloys as a representative high-performance catalyst system for SWCNT growth in a systematic manner by combining chemical vapor deposition (CVD) experiments with chirality-resolved spectroscopic analysis, as well as molecular dynamics (MD) simulations based on density functional theory-derived machine learning force fields while varying the Fe-Co ratio. Using zeolite-based SWCNTs prepared by alcohol CVD, absorption and photoluminescence spectroscopy, together with two-dimensional excitation-emission fitting was employed to quantify chirality-specific growth efficiency. Two distinct growth regimes were identified. At a relatively low temperature of 600 C, pure Co exhibits the highest catalytic activity, promoting efficient growth of small-diameter (0.7-0.9 nm) SWCNTs. In contrast, at 850 C, the Fe0.75Co0.25 alloy shows a pronounced enhancement in growth efficiency compared with pure Fe, pure Co, and other Fe-Co compositions, also yielding larger diameter tubes (0.9-1.1nm). Similar growth behavior was observed on SiO2 substrates, enabling detailed transmission electron microscopy analysis of catalyst nanoparticles. Electron microscopy and energy-dispersive X-ray spectroscopy reveal that high SWCNT yields correlate with the formation of small, uniform Fe-Co nanoparticles with Co-enriched surfaces, in excellent agreement with MD simulations. Lastly, MD results are summarized in a composition-diameter phase diagram that rationalizes the experimentally observed growth trends. The exceptional performance of the Fe0.75Co0.25 catalyst at high temperature is attributed to the stabilization of small and uniform catalyst clusters, providing mechanistic insight into the synergistic roles of alloy composition and temperature in SWCNT growth.

cond-mat.mtrl-sci↗

arXiv2026

Symmetry-aware Conditional Generation of Crystal Structures Using Diffusion Models

The application of generative models in crystal structure prediction (CSP) has gained significant attention. Conditional generation--particularly the generation of crystal structures with specified stability or other physical properties has been actively researched for material discovery purposes. Meanwhile, the generative models capable of symmetry-aware generation are also under active development, because space group symmetry has a strong relationship with the physical properties of materials. In this study, we demonstrate that the symmetry control in the previous conditional crystal generation model may not be sufficiently effective when space group constraints are applied as a condition. To address this problem, we propose the WyckoffDiff-Adaptor, which embeds conditional generation within a WyckoffDiff architecture that effectively diffuses Wyckoff positions to achieve precise symmetry control. We successfully generated formation energy phase diagrams while specifying stable structures of particular combination of elements, such as Li--O and Ti--O systems, while simultaneously preserving the symmetry of the input conditions. The proposed method with symmetry-aware conditional generation demonstrates promising results as an effective approach to achieving the discovery of novel materials with targeted physical properties.

cond-mat.mtrl-sci↗

arXiv2025

Analysis of Fe and Co binary catalysts in chemical vapor deposition growth of single-walled carbon nanotubes

Metal catalysts play a pivotal role in the growth of single-walled carbon nanotubes (SWCNTs), with binary metallic catalysts emerging as an efficient SWCNT synthesis strategy. Among these, iron (Fe), cobalt (Co), and their alloys are particularly effective. However, prior studies have predominantly employed Fe--Co alloy catalysts with fixed atomic ratios as well as unchanged chemical vapor deposition (CVD) conditions, leaving the influence of variable Fe--Co compositions and CVD growth parameters on SWCNT synthesis poorly understood. This study focuses on the role of Fe--Co catalyst ratios, with the aim of elucidating the distinct contributions of Fe and Co atoms in the growth of SWCNTs. By systematically exploring a wide range of Fe--Co ratios and growth conditions, we identified Fe$_{0.75}$Co$_{0.25}$ as a highly efficient binary catalyst at 850~$^\circ$C, primarily forming catalyst clusters with diameters of 2.5--6~nm and yielding SWCNTs with diameters ranging from 0.9--1.1~nm. On the other hand, Fe$_{0}$Co$_{1}$ exhibited higher catalytic activity at 600~$^\circ$C, generating smaller catalyst clusters of 1.5--5~nm and producing SWCNTs with reduced diameters of about 0.6--0.9~nm. Transmission electron microscope (TEM) and energy dispersive X-ray spectroscopy (EDS) analyses reveal that high SWCNT yields correlate with the formation of uniformly sized Fe--Co catalyst particles with surface-segregated Co that optimizes carbon solubility. Molecular dynamics (MD) simulations further corroborate these findings, demonstrating that the structure and melting behavior of Fe$_x$Co$_{1-x}$ clusters depend on cluster size and composition.

cond-mat.mtrl-sci↗

arXiv2025

Machine-Learned Bond-Order Potential for Exploring the Configuration Space of Carbon

Construction of transferable machine-learning interatomic potentials with a minimal number of parameters is important for their general applicability. Here, we present a machine-learning interatomic potential with the functional form of the bond-order potential for comprehensive exploration over the configuration space of carbon. The physics-based design of this potential enables robust and accurate description over a wide range of the potential energy surface with a small number of parameters. We demonstrate the versatility of this potential through validations across various tasks, including phonon dispersion calculations, global structure searches for clusters, phase diagram calculations, and enthalpy-volume mappings of local minima structures. We expect that this potential can contribute to the discovery of novel carbon materials.

cond-mat.mtrl-sci↗

arXiv2023

Edge Dynamics in Iron-Cluster Catalyzed Growth of Single-Walled Carbon Nanotubes Revealed by Molecular Dynamics Simulations based on a Neural Network Potential

Given the high potential for applications utilizing the unique properties of single-walled carbon nanotubes (SWCNTs), there is considerable enthusiasm for addressing the challenges associated with synthesizing SWCNTs with specific chirality. To elucidate the mechanisms that determine the chirality of SWCNTs during growth, intensive efforts have been devoted to classical molecular dynamics (MD) simulations. However, the mechanism of chirality determination has not been fully clarified, which can partly be attributed to the limited accuracy of empirical interatomic potentials in reproducing the behavior of carbon and metal atoms. In this work, we develop a neural network potential (NNP) for carbon-metal system to accurately describe the SWCNT growth, and perform MD simulations of SWCNT growth using the NNP. The MD simulations illustrate the defect-free, chirality-definable growth of SWCNTs, highlighting the dynamic rearrangement of edge configurations and the consistency between the probability of edge configuration appearance and the entropy-driven edge stability model proposed here. It is also shown that the edge defect formation is induced by vacancy and suppressed by vacancy healing through adatom diffusion on the SWCNT edges. These results provide insights into the edge formation thermodynamics and kinetics of SWCNTs, an important clue to the chirality-controlled synthesis of SWCNTs.

physics.comp-ph↗

arXiv2022

Cyber Catalysis: N$_2$ Dissociation over Ruthenium Catalyst with Strong Metal-Support Interaction

Catalysis informatics is constantly developing, and significant advances in data mining, molecular simulation, and automation for computational design and high-throughput experimentation have been achieved. However, efforts to reveal the mechanisms of complex supported nanoparticle catalysts in cyberspace have proven to be unsuccessful thus far. This study fills this gap by exploring N$_2$ dissociation on a supported Ru nanoparticle as an example using a universal neural network potential. We calculated 200 catalyst configurations considering the reduction of the support and strong metal-support interaction (SMSI), eventually performing 15,600 calculations for various N$_2$ adsorption states. After successfully validating our results with experimental IR spectral data, we clarified key N$_2$ dissociation pathways behind the high activity of the SMSI surface and disclosed the maximum activity of catalysts reduced at 650 {\deg}C. Our method is well applicable to other complex systems, and we believe it represents a key first step toward the digital transformation of investigations on heterogeneous catalysis.

cond-mat.mtrl-sci↗

arXiv2021

One-dimensional van der Waals Heterostructures: Growth Mechanism and Handedness Correlation Revealed by Non-destructive TEM

In this work, we perform a follow-up and comprehensive study on the structural details and formation mechanism of chemical vapor deposition (CVD) synthesized one-dimensional (1D) van der Waals heterostructures. Edge structures, nucleation sites, crystal epitaxial relationships are clearly revealed using transmission electron microscopy (TEM). This is achieved by the direct synthesis of heteronanotubes on a CVD-compatible Si/SiO2 TEM grid, which enabled a transfer-free and non-destructive access to many intrinsic structural details. In particular, we have distinguished different shaped boron nitride nanotube (BNNT) edges, which are confirmed, by electron diffraction at the same location, to be strictly associated with its own chiral angle and polarity. We also demonstrate the importance of surface cleanness and isolation for the formation of perfect 1D heterostructures. Furthermore, we elucidate the handedness correlation between SWCNT template and BNNT crystals. This work not only provides an in-depth understanding of this new 1D heterostructure material group, but also, in a more general perspective, serves as an interesting investigation on crystal growth on highly curved (radius of a couple of nm) atomic substrates.

cond-mat.mtrl-sci↗

arXiv2020

Photoluminescence from Single-Walled MoS$_2$ Nanotubes Coaxially Grown on Boron Nitride Nanotubes

Single- and multi-walled molybdenum disulfide (MoS$_2$) nanotubes have been coaxially grown on small diameter boron nitride nanotubes (BNNTs) which were synthesized from heteronanotubes by removing single-walled carbon nanotubes (SWCNTs), and systematically investigated by optical spectroscopy. The strong photoluminescence (PL) from single-walled MoS$_2$ nanotubes supported by core BNNTs is observed in this work, which evidences a direct band gap structure for single-walled MoS$_2$ nanotubes with around 6 - 7 nm in diameter. The observation is consistent with our DFT results that the single-walled MoS$_2$ nanotube changes from an indirect-gap to a direct-gap semiconductor when the diameter of a nanotube is more than around 5 nm. On the other hand, when there are SWCNTs inside the heteronanotubes of BNNTs and MoS$_2$ nanotubes, the PL signal is considerably quenched. The charge transfer and energy transfer between SWCNTs and single-walled MoS$_2$ nanotubes were examined through characterizations by PL, XPS, and Raman spectroscopy. Unlike the single-walled MoS$_2$ nanotubes, multi-walled MoS$_2$ nanotubes do not emit light. Single- and multi-walled MoS$_2$ nanotubes exhibit different Raman features in both resonant and non-resonant Raman spectra. The method of assembling heteronanotubes using BNNTs as templates provides an efficient approach for exploring the electronic and optical properties of other transition metal dichalcogenide nanotubes.

cond-mat.mtrl-sci↗

arXiv2020

Indirect-to-direct band gap crossover of single walled MoS$_2$ nanotubes

Using density functional theory, the electronic structures of single walled molybdenum disulfide nanotubes (MoS$_2$ NTs) were investigated as a function of diameter. Our calculations show that the electronic structure near the band gap is sensitive to the NT diameter: armchair MoS$_2$ NTs act as indirect gap semiconductors for diameters up to approximately 5.0 nm, while armchair MoS$_2$ NTs with larger diameters act as direct gap semiconductors with band edges located in the vicinity of $k = 2\pi/3$. This finding implies that MoS$_2$ NTs with large diameters should exhibit similar photoluminescence to 2D monolayer MoS$_2$ sheets. This indirect-to-direct band gap crossover is ascribed to the upward shift of the valence band peak at the $\Gamma$ point in small diameter NTs, which is caused by the tensile strain resulting from their tubular structures.

cond-mat.mtrl-sci↗

arXiv2018

One-dimensional van der Waals heterostructures

Property by design is one appealing idea in material synthesis but hard to achieve in practice. A recent successful example is the demonstration of van der Waals (vdW) heterostructures,1-3 in which atomic layers are stacked on each other and different ingredients can be combined beyond symmetry and lattice matching. This concept, usually described as a nanoscale Lego blocks, allows to build sophisticated structures layer by layer. However, this concept has been so far limited in two dimensional (2D) materials. Here we show a class of new material where different layers are coaxially (instead of planarly) stacked. As the structure is in one dimensional (1D) form, we name it "1D vdW heterostructures". We demonstrate a 5 nm diameter nanotube consisting of three different materials: an inner conductive carbon nanotube (CNT), a middle insulating hexagonal boron nitride nanotube (BNNT) and an outside semiconducting MoS2 nanotube. As the technique is highly applicable to other materials in the current 2D libraries,4-6 we anticipate our strategy to be a starting point for discovering a class of new semiconducting nanotube materials. A plethora of function-designable 1D heterostructures will appear after the combination of CNTs, BNNTs and semiconducting nanotubes.

cond-mat.mtrl-sci↗