arXiv Science⌕ Search

arXiv subjects

Kai Sun

Publications and source records attributed to Kai Sun.

At least 199 records · Page 11Linked to original sources

Mineral Detection of Neutrinos and Dark Matter. A Whitepaper

Minerals are solid state nuclear track detectors - nuclear recoils in a mineral leave latent damage to the crystal structure. Depending on the mineral and its temperature, the damage features are retained in the material from minutes (in low-melting point materials such as salts at a few hundred degrees C) to timescales much larger than the 4.5 Gyr-age of the Solar System (in refractory materials at room temperature). The damage features from the $O(50)$ MeV fission fragments left by spontaneous fission of $^{238}$U and other heavy unstable isotopes have long been used for fission track dating of geological samples. Laboratory studies have demonstrated the readout of defects caused by nuclear recoils with energies as small as $O(1)$ keV. This whitepaper discusses a wide range of possible applications of minerals as detectors for $E_R \gtrsim O(1)$ keV nuclear recoils: Using natural minerals, one could use the damage features accumulated over $O(10)$ Myr$-O(1)$ Gyr to measure astrophysical neutrino fluxes (from the Sun, supernovae, or cosmic rays interacting with the atmosphere) as well as search for Dark Matter. Using signals accumulated over months to few-years timescales in laboratory-manufactured minerals, one could measure reactor neutrinos or use them as Dark Matter detectors, potentially with directional sensitivity. Research groups in Europe, Asia, and America have started developing microscopy techniques to read out the $O(1) - O(100)$ nm damage features in crystals left by $O(0.1) - O(100)$ keV nuclear recoils. We report on the status and plans of these programs. The research program towards the realization of such detectors is highly interdisciplinary, combining geoscience, material science, applied and fundamental physics with techniques from quantum information and Artificial Intelligence.

astro-ph.IM↗

Rationalizing Euclidean Assemblies of Hard Polyhedra from Tessellations in Curved Space

Entropic self-assembly is governed by the shape of the constituent particles, yet a priori prediction of crystal structures from particle shape alone is non-trivial for anything but the simplest of space-filling shapes. At the same time, most polyhedra are not space-filling due to geometric constraints, but these constraints can be relaxed or even eliminated by sufficiently curving space. We show using Monte Carlo simulations that the majority of hard Platonic shapes self-assemble entropically into space-filling crystals when constrained to the surface volume of a 3-sphere. As we gradually decrease curvature to "flatten" space and compare the local morphologies of crystals assembling in curved and flat space, we show that the Euclidean assemblies can be categorized either as remnants of tessellations in curved space (tetrahedra and dodecahedra) or non-tessellation-based assemblies caused by large-scale geometric frustration (octahedra and icosahedra).

cond-mat.soft↗

Verwey transition as evolution from electronic nematicity to trimerons via electron-phonon coupling

Understanding the driving mechanisms behind metal-insulator transitions (MITs) is a critical step towards controlling material's properties. Since the proposal of charge-order-induced MIT in magnetite Fe3O4 in 1939 by Verwey, the nature of the charge order and its role in the transition have remained elusive-a longstanding challenge in the studies of complex oxides. Recently, a trimeron order was discovered in the low-temperature monoclinic structure of Fe3O4; however, the expected transition entropy change in forming trimeron at the Verwey transition is greater than the observed value, which arises a reexamination of the ground state in the high-temperature phase. Here we use electron diffraction to unveil that a nematic charge order on particular Fe sites emerges in the high-temperature cubic structure of bulk Fe3O4, and that upon cooling, a competitive intertwining of charge and lattice orders leads to the emergence of the Verwey transition. Moreover, MeV ultrafast electron diffraction (UED) provides a dynamic measure of the strong coupling between photoexcited electrons and the X3 phonon modes. Our findings discover a new type of electronic nematicity in correlated materials and offer novel insights into the Verwey transition mechanism in Fe3O4 via the electron-phonon coupling.

cond-mat.str-el↗

On the effects of strain, defects, and interactions on the topological properties of HfTe5

Topological insulators are characterized by spin-momentum-locked massless surface states which are robust under various perturbations. Manipulating such surface states is a topic of vigorous research, as a possible route for the realization of emergent many-body physics in topological systems. Thus far, time-reversal symmetry breaking via Coulomb and magnetic perturbations has been a dominant approach for the tuning of topological states. However, the effect of the structural degrees of freedom on quasi-particle dynamics in topological materials remains elusive. In this work, we demonstrate a transition in HfTe5 between distinct topological phases as a function of either Te vacancy concentration or applied strain; these phases are characterized theoretically as a transition from strong to weak topological insulator and experimentally by a transition from sharp surface states and Dirac crossing to a Fermi-liquid-like quasiparticle state in which these surface-localized features are heavily suppressed. Although vacancies can result in various consequences such as scattering, doping, and structural distortions, we show that changes in the lattice constants play the foremost role in determining the electronic structure, self-energy, and topological states of HfTe5. Our results demonstrate the possibility of using both defect chemistry and strain as control parameters for topological phase transitions and associated many-body physics.

cond-mat.mtrl-sci↗

Experimental demonstration of separating the waveparticle duality of a single photon with the quantum Cheshire cat

As a fundamental characteristic of physical entities, waveparticle duality describes whether a microscopic entity exhibits wave or particle attributes depending on the specific experimental setup. This assumption is premised on the notion that physical properties are inseparable from the objective carrier. However, after the concept of the quantum Cheshire cats was proposed, which makes the separation of physical attributes from the entity possible, the premise no longer holds. Furthermore, an experimental demonstration of the separation of the wave and particle attributes inspired by this scenario remains scarce. In this work, we experimentally separated the wave and particle attributes of a single photon by exploiting the quantum Cheshire cat concept for the first time. By applying a weak disturbance to the evolution of the system, we achieve an effect similar to the quantum Cheshire cat and demonstrated the separation of the wave and particle attributes via the extraction of weak values. Our work provides a new perspective for the indepth understanding of waveparticle duality and promotes the application of weak measurements in fundamentals of quantum mechanics.

quant-ph↗

The "Sign problem" of the 3rd order anomalous Hall effect in topological magnetic materials

The anomalous Hall effect (AHE), which provides a bridgeway between the geometry of quantum wavefunctions and transport measurements, has been a key focus of intensive studies. In addition to the well-studied linear AHE, governed by the electronic Berry curvature, nonlinear AHE originated from higher-order Berry-curvature multipoles has also been observed in recent studies. Inspired by the 3rd order AHE and its room temperature sign switching in kagome antiferromagnet FeSn [S. Sankar, R. Liu, X. Gao, et al, to be published (2023)], we investigate the generic sign structure of Berry-curvature induced 3rd order AHE in topological magnetic material. We find that in contrast to the linear Hall coefficient, whose sign is determined by the broken time-reversal symmetry, the sign of the 3rd order Hall coefficient is dictated by the interplay between time-reversal symmetry breaking, magnetic order, and spin-orbit couplings. Our calculations give a possible solution for the "sign problem" of the 3rd order AHE response in the phase space spanned by the in- and out-of-plane magnetization, the spin-orbital coupling strength and chemical potential. We further propose realistic experiment setups to systematically reveal the sign structure in the 3rd order AHE response via continuously rotating the magnetic field directions.

cond-mat.mes-hall↗

Self-training through Classifier Disagreement for Cross-Domain Opinion Target Extraction

Opinion target extraction (OTE) or aspect extraction (AE) is a fundamental task in opinion mining that aims to extract the targets (or aspects) on which opinions have been expressed. Recent work focus on cross-domain OTE, which is typically encountered in real-world scenarios, where the testing and training distributions differ. Most methods use domain adversarial neural networks that aim to reduce the domain gap between the labelled source and unlabelled target domains to improve target domain performance. However, this approach only aligns feature distributions and does not account for class-wise feature alignment, leading to suboptimal results. Semi-supervised learning (SSL) has been explored as a solution, but is limited by the quality of pseudo-labels generated by the model. Inspired by the theoretical foundations in domain adaptation [2], we propose a new SSL approach that opts for selecting target samples whose model output from a domain-specific teacher and student network disagree on the unlabelled target data, in an effort to boost the target domain performance. Extensive experiments on benchmark cross-domain OTE datasets show that this approach is effective and performs consistently well in settings with large domain shifts.

cs.CL↗

A Heterogeneous Multiscale Method for Power System Simulation Considering Electromagnetic Transients

Traditional dynamic security assessment faces challenges as power systems are experiencing a transformation to inverter-based-resource (IBR) dominated systems, for which electromagnetic transient (EMT) dynamics have to be considered. However, EMT simulation is time-consuming especially for a large power grid because the mathematical model based on detailed component modeling is highly stiff and needs to be integrated at tiny time steps due to numerical stability. This paper proposes a heterogeneous multiscale method (HMM) to address the simulation of a power system considering EMT dynamics as a multiscale problem. The method aims to accurately simulate the macroscopic dynamics of the system even when EMT dynamics are dominating. By force estimation using a kernel function, the proposed method automatically generates a macro model on the fly of simulation based on the micro model of EMT dynamics. It can flexibly switch between the micro- and macro-models to capture important EMT dynamics during some time intervals while skipping over other time intervals of less interest to achieve a superior simulation speed. The method is illustrated by a case study on a two-machine EMT model to demonstrate its potential for power system simulation.

math.DS↗

Semi-Analytical Electromagnetic Transient Simulation Using Differential Transformation

For electromagnetic transient (EMT) simulation of a power system, a state-space-based approach needs to solve state-space EMT equations by using numerical integration methods, e.g., the Euler method, Runge-Kutta methods, and trapezoidal-rule method, at small time steps. The simulation can be slow on a power system having multiple generators. To speed up state-space-based EMT simulations, this paper proposes a Differential Transformation based semi-analytical method that repeatedly utilizes a high-order semi-analytical solution of the EMT equations at longer time steps. The proposed semi-analytical method is tested on the detailed EMT model of a four-generator two-area system. Simulation results show the significant potential of the proposed method to accelerate EMT simulations of power systems compared with traditional numerical methods.

eess.SY↗

Optimal Distributed Voltage Control via Primal Dual Gradient Dynamics

The rapidly increasing penetration of inverter-based resources into a power transmission network requires more sophisticated voltage control strategies considering their inherent output variabilities. In addition, faults and load variations affect the voltage profile over the power network. This paper proposes a Primal Dual Gradient Dynamics based optimal distributed voltage control approach that optimizes outputs of distributed reactive power sources to maintain an acceptable voltage profile while preserving operational limits. Case studies of this new approach on IEEE test systems have verified its effectiveness.

math.OC↗

Reduced Order Characterization of Nonlinear Oscillations Using an Adaptive Phase-Amplitude Coordinate Framework

We propose a general strategy for reduced order modeling of systems that display highly nonlinear oscillations. By considering a continuous family of forced periodic orbits defined in relation to a stable fixed point and subsequently leveraging phase-amplitude-based reduction strategies, we arrive at a low order model capable of accurately capturing nonlinear oscillations resulting from arbitrary external inputs. In the limit that oscillations are small, the system dynamics relax to those obtained from local linearization, i.e.,~that can be fully described using linear eigenmodes. For larger amplitude oscillations, the behavior can be understood in terms of the dynamics of a small number of nonlinear modes. We illustrate the proposed strategy in a variety of examples yielding results that are substantially better than those obtained using standard linearization-based techniques.

math.DS↗

Superconductivity and bosonic fluid emerging from Moiré flat bands

Although evidence of inter-valley attraction-mediated by phonon or topological fluctuations is accumulating, the origin of superconductivity in the flat-band quantum moiré materials remains an open question. Here, instead of attempting to pinpoint the origin of the superconductivity, we aim at identifying universal properties of moiré flat bands that shall emerge in the presence of inter-valley attractions. We show that by matching the interaction strength of inter-valley attraction with intra-valley repulsion, the flat-band limit becomes exactly solvable. Away from the flat-band limit, the system can be simulated via quantum Monte Carlo (QMC) methods without sign problem for any fillings. Combining analytic solutions with large-scale numerical simulations, we show that upon increasing temperature, the superconducting phase melts into a bosonic fluid of Cooper pairs with large/diverging compressibility. In contrast to flat-band attractive Hubbard models, where similar effects arise only for on-site interactions, our study indicates this physics is a universal property of moiré flat bands, regardless of microscopic details such as the range of interactions and/or spin-oribt couplings. At higher temperature, the boson fluid phase gives its way to a pseudo gap phase, where some Cooper pairs are torn apart by thermal fluctuations, resulting in fermion density of states inside the gap. Unlike the superconducting transition temperature, which is very sensitive to doping and twisting angles, the gap and the temperature scale of the boson fluid phase and the pseudo gap phase are found to be nearly independent of doping level and/or flat-band bandwidth. The relevance of these phases with experimental discoveries in the flat band quantum moiré materials is discussed.

cond-mat.supr-con↗

Quantum Monte Carlo sign bounds, topological Mott insulator and thermodynamic transitions in twisted bilayer graphene model

We show that for magic-angle twisted bilayer graphene (TBG) away from charge neutrality, although quantum Monte Carlo (QMC) simulations suffer from the sign problem, the computational complexity is at most polynomial at certain integer fillings. For even integer fillings, this polynomial complexity survives even if an extra inter-valley attractive interaction is introduced, on top of Coulomb repulsions. This observation allows us to simulate magic-angle twisted bilayer graphene and to obtain accurate phase diagram and dynamical properties. At the chiral limit and filling $ν=1$, the simulations reveal a thermodynamic transition separating metallic state and a $C=1$ correlated Chern insulator -- topological Mott insulator (TMI) -- and the pseudogap spectrum slightly above the transition temperature. The ground state excitation spectra of the TMI exhibit a spin-valley U(4) Goldstone mode and a time reversal restoring excitonic gap smaller than the single particle gap. These results are qualitatively consistent with the recent experimental findings at zero-field and $ν=1$ filling in $h$-BN nonaligned TBG.

cond-mat.str-el↗

Nonvolatile Electrochemical Random-Access Memory Under Short Circuit

Electrochemical random-access memory (ECRAM) is a recently developed and highly promising analog resistive memory element for in-memory computing. One longstanding challenge of ECRAM is attaining retention time beyond a few hours. This short retention has precluded ECRAM from being considered for inference classification in deep neural networks, which is likely the largest opportunity for in-memory computing. In this work, we develop an ECRAM cell with orders of magnitude longer retention than previously achieved, and which we anticipate to exceed 10 years at 85C. We hypothesize that the origin of this exceptional retention is phase separation, which enables the formation of multiple effectively equilibrium resistance states. This work highlights the promises and opportunities to use phase separation to yield ECRAM cells with exceptionally long, and potentially permanent, retention times.

cs.ET↗

Simulation of Transients in Natural Gas Networks via A Semi-analytical Solution Approach

Simulation and control of the transient flow in natural gas networks involve solving partial differential equations (PDEs). This paper proposes a semi-analytical solutions (SAS) approach for fast and accurate simulation of the natural gas transients. The region of interest is divided into a grid, and an SAS is derived for each grid cell in the form of the multivariate polynomials, of which the coefficients are identified according to the initial value and boundary value conditions. The solutions are solved in a ``time-stepping'' manner; that is, within one time step, the coefficients of the SAS are identified and the initial value of the next time step is evaluated. This approach achieves a much larger grid cell than the widely used finite difference method, and thus enhances the computational efficiency significantly. To further reduce the computation burden, the nonlinear terms in the model are simplified, which induces another SAS scheme that can greatly reduce the time consumption and have minor impact on accuracy. The simulation results on a single pipeline case and a 6-node network case validate the advantages of the proposed SAS approach in accuracy and computational efficiency.

math.DS↗

Digital Asset Valuation: A Study on Domain Names, Email Addresses, and NFTs

Existing works on valuing digital assets on the Internet typically focus on a single asset class. To promote the development of automated valuation techniques, preferably those that are generally applicable to multiple asset classes, we construct DASH, the first Digital Asset Sales History dataset that features multiple digital asset classes spanning from classical to blockchain-based ones. Consisting of 280K transactions of domain names (DASH_DN), email addresses (DASH_EA), and non-fungible token (NFT)-based identifiers (DASH_NFT), such as Ethereum Name Service names, DASH advances the field in several aspects: the subsets DASH_DN, DASH_EA, and DASH_NFT are the largest freely accessible domain name transaction dataset, the only publicly available email address transaction dataset, and the first NFT transaction dataset that focuses on identifiers, respectively. We build strong conventional feature-based models as the baselines for DASH. We next explore deep learning models based on fine-tuning pre-trained language models, which have not yet been explored for digital asset valuation in the previous literature. We find that the vanilla fine-tuned model already performs reasonably well, outperforming all but the best-performing baselines. We further propose improvements to make the model more aware of the time sensitivity of transactions and the popularity of assets. Experimental results show that our improved model consistently outperforms all the other models across all asset classes on DASH.

cs.IR↗

Remote entanglement distribution in a quantum network via multinode indistinguishability of photons

Quantum networking relies on entanglement distribution between distant nodes, typically realized by swapping procedures. However, entanglement swapping is a demanding task in practice, mainly because of limited effectiveness of entangled photon sources and Bell-state measurements necessary to realize the process. Here we experimentally activate a remote distribution of two-photon polarization entanglement superseding the need for initial entangled pairs and traditional Bell-state measurements. This alternative procedure is accomplished thanks to the controlled spatial indistinguishability of four independent photons in three separated nodes of the network, which enables us to perform localized product-state measurements in the central node acting as a trigger. This experiment proves that the inherent indistinguishability of identical particles supplies new standards for feasible quantum communication in multinode photonic quantum networks.

quant-ph↗

Omnimodal topological polarization of bilayer networks: analysis in the Maxwell limit and experiments on a 3D-printed prototype

Periodic networks on the verge of mechanical instability, called Maxwell lattices, are known to exhibit zero-frequency modes localized to their boundaries. Topologically polarized Maxwell lattices, in particular, focus these zero modes to one of their boundaries in a manner that is protected against disorder by the reciprocal-space topology of the lattice's band structure. Here, we introduce a class of mechanical bilayers as a model system for designing topologically protected edge modes that couple in-plane dilational and shearing modes to out-of-plane flexural modes, a paradigm that we refer to as omnimodal polarization. While these structures exhibit a high-dimensional design space that makes it difficult to predict the topological polarization of generic geometries, we are able to identify a family of mirror-symmetric bilayers that inherit the in-plane modal localization of their constitutive monolayers whose topological polarization can be determined analytically. Importantly, the coupling between the layers results in the emergence of omnimodal polarization, whereby in-plane and out-of-plane edge modes localize on the same edge. We demonstrate these theoretical results by fabricating a mirror-symmetric, topologically polarized kagome bilayer consisting of a network of elastic beams via additive manufacturing and confirm this finite-frequency polarization via finite element analysis and laser-vibrometry experiments.

cond-mat.soft↗