arXiv subjects

Jinyoung Kim

Publications and source records attributed to Jinyoung Kim.

At least 19 recordsLinked to original sources

arXiv2026

Interfacial polarity control of anomalous Hall effect in LaCoO3-SrIrO3 heterostructures

Interfacial polarity in oxide heterostructures can drive robust charge redistribution across the interface, yet its role in tailoring topological transport phenomena like the anomalous Hall effect (AHE) remains largely unexplored. Here, we control the sign of polarity-induced charge in SrIrO3-LaCoO3 interfaces by independently engineering the layer stacking sequence and the atomic termination. In-situ angle-resolved photoemission spectroscopy directly confirms the sign reversal of the induced charge in SrIrO3 through the contrasting electronic band shifts between different interfacial configurations. Magneto-transport measurements across a systematic matrix of four distinct heterostructures reveal that the AHE can be cleanly toggled on and off: it emerges exclusively under electron-doped conditions, while remaining suppressed for hole-doped SrIrO3. Our results establish that this response originates from an intrinsic, Berry-curvature-driven mechanism governed by polarity-controlled band filling of SrIrO3. These findings shift interfacial polarity from a passive structural consequence to an active design variable for engineering topological quantum states in oxide heterostructures.

cond-mat.str-el↗

arXiv2026

An E-value Reanalysis of DESI's Dynamical Dark Energy Signal

Cosmological surveys such as DESI release data in stages, and each release reprocesses earlier observations and supersedes its predecessor. Testing the same hypothesis at every release inflates the false-positive rate, and only the collaboration can estimate the cross-release covariance that an exact combination needs. We show how to combine evidence across such releases using public products alone. From each release we compute an e-value, a non-negative statistic with expectation at most one under the null, and we average these e-values with weights fixed in advance. Provided each release's own likelihood is correct, this average controls the false-positive rate at every release under arbitrary dependence between releases. For DESI BAO at a fixed Planck background, DR2 alone gives an e-value of $33.97$ against $Λ$CDM ($p \le 0.0295$) under our reference test specification, a flat prior on $(w_0, w_a)$ over a fixed box. The equal-weight average of DR1 and DR2 is $17.51$ ($p \le 0.0571$), below the rejection threshold of $20$. We did not fix these weights before DR2 was published, and the weights we now fix ahead of DR3 give $p \le 0.0874$ at DR2. Without a model of the cross-release covariance, an exact combination that counts each observation once can take any value. Under explicit models it ranges from below the threshold to nearly double the DR2 value, depending on the structure assumed. The evidence is concentrated in the LRG2 bin, which also changed most between releases. Without it the DR2 e-value falls to $0.49$, and a look-elsewhere correction over the seven redshift bins leaves no rejection. DR2 does not reject under wider priors either. The signal is therefore fragile and specification-dependent. We recommend that surveys report per-release e-values with a stated test specification and a combination rule fixed in advance, and publish the cross-release covariance.

astro-ph.CO↗

arXiv2026

Bootstrapping Video Interaction Generation with Synthetic State Transitions

While recent video generative models can synthesize high-fidelity videos, they struggle to portray plausible physical interactions and the resulting state transitions, a critical bottleneck for applications in robotics and VR/AR. To address this, we introduce a framework to generate a scalable synthetic dataset of controllable interactions. Our pipeline leverages a structured taxonomy and state-of-the-art image editing models to create explicit `start' and `end' state images, which serve as visual anchors for the interaction. To generate a seamless video utilizing these anchors, we propose State-Guided Sampling (SGS), a novel sampling technique that mitigates artifacts common in naive conditional generation. Furthermore, we develop and validate a new automated evaluation system that aligns with human judgments to ensure data quality. Experiments show that fine-tuning a base model on our dataset significantly enhances its ability to generate plausible interactions.

cs.CV↗

arXiv2026

From Tunnel Overburden Reconstruction to Tidal Measurements via atmospheric muon

Muography with scintillator-based detectors enables the investigation of density distributions within large structures. The Hankuk Atmospheric-muon Wide Landscaping (HAWL) project is the first real-time portable muon tomography. It successfully charted the mountainous region of eastern Korea by measuring cosmic-ray muons with a detector operated in a moving vehicle. HAWL achieved a tunnel length accuracy of 6.0 % and an overburden measurement range of 8-400 meter-water-equivalent (m.w.e.). The HAWL upgrade (HAWLU) features a more compact design and enables trajectory reconstruction. Using this upgraded system, we measured tidal water-level variations with meter-scale precision over 31.6 days in the Boryeong Undersea Tunnel. The measured muon rate decreased by $1.72 \pm 0.04$ % per meter of increasing tidal level, while the reconstruction of undersea tunnel scan independently validated the detector performance. These results demonstrate the capabilities of dynamic muography in two approaches, one with a portable detector in motion and the other with a detector measuring a target that changes over time.

physics.ins-det↗

arXiv2026

Precision measurement of ocean tides using cosmic-ray muons

Cosmic-ray muons provide a natural probe of the integrated mass along their trajectories. Here we show that cosmic-ray muons can monitor ocean-tide-induced variations in seawater overburden within an underwater tunnel. The observed modulation closely tracks independent tide-gauge measurements, yielding an attenuation response coefficient of $k=43.2\pm1.0$~counts$\rm /h/m$ and resolving meter-scale variations in seawater overburden. A spatial muography scan validates the overburden model, confirming that the seawater contribution is essential to reproduce the observed attenuation. Unlike conventional tide gauges that measure sea level locally, muography measures the integrated overburden above the detector. These results demonstrate that muography can quantitatively resolve small, time-dependent variations in environmental overburden, providing a new approach to monitoring dynamic natural systems.

hep-ex↗

arXiv2026

Multi-dimensional Preference Alignment by Conditioning Reward Itself

Reinforcement Learning from Human Feedback has emerged as a standard for aligning diffusion models. However, we identify a fundamental limitation in the standard DPO formulation because it relies on the Bradley-Terry model to aggregate diverse evaluation axes like aesthetic quality and semantic alignment into a single scalar reward. This aggregation creates a reward conflict where the model is forced to unlearn desirable features of a specific dimension if they appear in a globally non-preferred sample. To address this issue, we propose Multi Reward Conditional DPO (MCDPO). This method resolves reward conflicts by introducing a disentangled Bradley-Terry objective. MCDPO explicitly injects a preference outcome vector as a condition during training, which allows the model to learn the correct optimization direction for each reward axis independently within a single network. We further introduce dimensional reward dropout to ensure balanced optimization across dimensions. Extensive experiments on Stable Diffusion 1.5 and SDXL demonstrate that MCDPO achieves superior performance on benchmarks. Notably, our conditional framework enables dynamic and multiple-axis control at inference time using Classifier Free Guidance to amplify specific reward dimensions without additional training or external reward models.

cs.CV↗

arXiv2026

KoALa-Bench: Evaluating Large Audio Language Models on Korean Speech Understanding and Faithfulness

Recent advances in large audio language models (LALMs) have enabled multilingual speech understanding. However, benchmarks for evaluating LALMs remain scarce for non-English languages, with Korean being one such underexplored case. In this paper, we introduce KoALa-Bench, a comprehensive benchmark for evaluating Korean speech understanding and speech faithfulness of LALMs. In particular, KoALa-Bench comprises six tasks. Four tasks evaluate fundamental speech understanding capabilities, including automatic speech recognition, speech translation, speech question answering, and speech instruction following, while the remaining two tasks evaluate speech faithfulness, motivated by our observation that several LALMs often fail to fully leverage the speech modality. Furthermore, to reflect Korea-specific knowledge, our benchmark incorporates listening questions from the Korean college scholastic ability test as well as content covering Korean cultural domains. We conduct extensive experiments across six models, including both white-box and black-box ones. Our benchmark, evaluation code, and leaderboard are publicly available at https://ksbench.github.io/Korean-Benchmark/.

cs.CL↗

arXiv2026

Co-Evolving Actor-Conditioned Critics for Non-Verifiable Generation

Natural-language critiques provide supervision beyond scalar rewards for non-verifiable generation, which lacks deterministic verifiers. In critique-guided refinement, a critic gives feedback on an initial response and an actor revises it. However, final revision quality does not reveal whether the critique was actually useful: a capable actor may improve without following the feedback, while valid feedback may fail if the actor cannot execute it. We frame critique as actor-conditioned revision guidance, where usefulness depends on whether the feedback helps the target actor address the intended weakness. We introduce TAIScore (Targeted Actionable Improvement Score), a reward that evaluates the instruction, initial response, critique, and revision together, assessing whether the critique targets a real weakness, whether the actor follows it, and whether the intended aspect improves. We use this reward to train an actor-tailored critic with GRPO, and use critique-guided refinements to construct DPO preference pairs for the actor, forming a co-evolving critic-actor loop where the critic adapts to the actor's changing capability. Experiments show that an 8B critic trained with TAIScore outperforms both a zero-shot 120B critic and critics trained with outcome-only or critique-only reward signals. Co-evolving the critic and actor further improves performance, suggesting that effective critique supervision should adapt as the actor changes.

cs.CL↗

arXiv2026

SelFusion: Self-distillation for Diffusion Language Models

Diffusion language models (DLMs) alleviate the inherent latency bottleneck of autoregressive (AR) large language models (LLMs), but their degraded generation quality limits practical applicability. Although knowledge distillation (KD) can be a promising direction for improving performance, we empirically find that naively applying conventional KD yields only marginal gains, or even degrades generation quality. Based on these observations, we propose a novel self-distillation framework for DLMs, namely SelFusion. To enable effective KD without an external teacher model, SelFusion performs two forward passes with different masking levels, defining the hard mode with a larger masking probability and the easy mode with a smaller masking probability. However, the easy mode is not always more accurate than the hard mode and can be overconfident on incorrect tokens. Thus, we introduce bidirectional KD between the two modes, which can dynamically determine the distillation direction based on token-level correctness. Experimental results on instruction-following tasks show that the proposed self-distillation substantially outperforms other KD methods with external LLM and DLM teachers. In many configurations, the student trained with SelFusion even surpasses the performance of the LLM teacher, providing a practical path toward improving DLM generation quality. Source code can be found at https://github.com/scai-research/SelFusion_official

cs.CL↗

arXiv2026

Development and Initial Performance of an Upgraded NaI(Tl) Crystal Encapsulation for COSINE-100U

The COSINE-100 experiment was designed to test the DAMA/LIBRA annual-modulation claim using low-background NaI(Tl) detectors. For the COSINE-100U upgrade, we developed a new crystal-encapsulation system to increase light-collection efficiency while preserving long-term detector stability, thereby improving sensitivity to low-mass dark matter. The upgraded design eliminates the quartz optical windows used in COSINE-100 and directly couples the photomultiplier tubes (PMTs) to the crystal end faces through 2-mm-thick silicone optical pads, thereby reducing the number of optical interfaces. For the larger crystals, the crystal edges were beveled to guide scintillation light more efficiently onto 3-inch high-quantum-efficiency PMTs. The performance study uses 2462~h (102.6~days) of room-temperature COSINE-100U data and, for direct background comparisons, reference COSINE-100 data acquired near the end of operation. 698~h (29.1~days) of COSINE-100 data acquired near the end of operation in March 2023. All eight crystals showed higher light yields than in COSINE-100, with values ranging from 15.8 to 27.7~p.e./keV; six crystals exceeded 20~p.e./keV. The measured bulk-$α$ rates were lower than the COSINE-100 values and consistent with the expected time evolution of internal $^{210}$Pb, while the 1--2-MeV surface-$α$ rates were substantially reduced. The upgrade also restored two crystals that had previously been excluded from the COSINE-100 physics analysis because of poor optical performance. Independent validation tests demonstrated that the encapsulation remains mechanically robust and optically stable during long-term immersion in liquid scintillator at low temperature. This paper presents the encapsulation design, the room-temperature detector performance, and the reduction in surface-related backgrounds achieved at the Yemilab facility.

physics.ins-det↗

arXiv2026

Strain-tuned orbital-dependent electronic correlations in FeTe thin films

Iron chalcogenides exhibit rich phenomena which are governed by orbital-dependent electronic interactions and strong electronic correlation. In particular, many studies have explored orbital selectivity in FeTe through Se doping. Here, applying tensile strain to thin films allows us to precisely control the system without other impurities that may arise from chemical doping to investigate the emergent behaviors in FeTe. Using angle-resolved photoemission spectroscopy, we observe a spectral weight transfer between $d_{\rm xy}$ and $d_{\rm z^{2}}$ orbitals, evidence of an orbital-selective Mott phase (OSMP). Beyond OSMP, we reveal hitherto unobserved strain-induced effects, distinct from chemical doping. The evolution of $d_{\rm xz}$ orbital demonstrates how electron hopping mechanism plays an important role in defining the electronic properties of the system. Our findings highlight a direct correlation between epitaxial strain and the evolution of electronic structures in FeTe.

cond-mat.str-el↗

arXiv2026

Validation of the COSINE-100U NaI(Tl) Encapsulation for Low-Temperature Operation in Liquid Scintillator

The COSINE-100U (upgrade) will enhance the sensitivity of the COSINE-100 dark matter search by operating the detector array immersed in liquid scintillator (LS) at $-30^oC$. To validate the detector design for these conditions, we constructed a module using the COSINE-100U encapsulation and performed a dedicated long-term stability study. The module was first monitored at room temperature for ~110 days in air, followed by a one-week immersion in LAB-based LS to verify initial compatibility. Upon confirming stable optical performance, the temperature was lowered to $-33^oC$. During approximately 150 days of continuous operation at low temperature, we observed no degradation in performance. These results demonstrate the chemical and mechanical robustness of the encapsulation, confirming its suitability for the COSINE-100U physics run.

physics.ins-det↗

arXiv2026

Coexisting Kagome and Heavy Fermion Flat Bands in YbCr$_6$Ge$_6$

Flat bands, emergent in strongly correlated electron systems, stand at the frontier of condensed matter physics, providing fertile ground for unconventional quantum phases. Recent observations of dispersionless bands at the Fermi level in kagome lattice open the possibility of unifying the disjoint paradigms of topology and correlation-driven heavy fermion liquids. Here, we report the unprecedented coexistence of these mechanisms in the layered kagome metal YbCr6Ge6. At high temperatures, an intrinsic kagome flat band-arising from the frustrated hopping on the kagome lattice-dominates the Fermi level. Upon cooling, localized Yb 4f-states hybridize with the topological kagome flat bands, transforming this state into the Kondo resonance states that are nearly dispersionless across the entire Brillouin zone. Crystalline symmetry forbids hybridization along specific high-symmetry lines, which stabilizes Dirac crossings of heavy-fermion character. Topological analysis of the resulting gaps reveals both trivial and nontrivial Z2 invariants, establishing the emergence of a Dirac-Kondo semimetal phase. Taken together, these results identify YbCr6Ge6 as a prototype of a topological heavy-fermion system and a platform where geometric frustration, strong correlations, and topology converge, with broad implications for correlated quantum matter.

cond-mat.str-el↗

arXiv2026

Superconductivity in Isolated Single Copper Oxygen Plane

One of the central questions in cuprate superconductivity is if superconductivity can exist in an isolated single CuO$_2$ plane without any interlayer coupling. There have been numerous experimental efforts to answer this question, but it still has not been clearly resolved. Here we present a heterostructure system with an isolated half-unit-cell La$_{2-x}$Sr$_x$CuO$_4$ which has a single CuO$_2$ plane. Using in-situ angle-resolved photoemission spectroscopy, we measured the electronic and gap structures of a single CuO$_2$ plane. We observed a \textit{d}-wave-like gap which closes somewhat above the bulk T$_c$. Moreover, almost identical gap properties are seen for both single CuO$_2$ plane and bulk. These observations lead us to the conclusion that the d-wave superconductivity of cuprates also exists in a single CuO$_2$ plane. Our results demonstrate that cuprate superconductivity is essentially a two-dimensional phenomenon and provide a platform to study cuprate superconductivity in a purely two-dimensional system.

cond-mat.supr-con↗

arXiv2026

DeepVideo-R1: Video Reinforcement Fine-Tuning via Difficulty-aware Regressive GRPO

Recent works have demonstrated the effectiveness of reinforcement learning (RL)-based post-training for enhancing the reasoning capabilities of large language models (LLMs). In particular, Group Relative Policy Optimization (GRPO) has shown impressive success using a PPO-style reinforcement learning algorithm with group-normalized rewards. However, the effectiveness of GRPO in Video Large Language Models (VideoLLMs) remains underexplored. In this paper, we explore GRPO and identify two issues that hinder effective learning: (1) reliance on safeguards, and (2) vanishing advantage. To mitigate these challenges, we propose DeepVideo-R1, a video large language model trained with Reg-GRPO (Regressive GRPO) and difficulty-aware data augmentation. Reg-GRPO reformulates the GRPO loss function as a regression task that directly predicts the advantage in GRPO, eliminating the need for safeguards such as clipping and min operations. This directly aligns the model with the advantages, providing guidance to prefer better outputs. The difficulty-aware data augmentation strategy augments input prompts/videos to target solvable difficulty levels, enabling diverse reward signals. Our experimental results show that our approach significantly improves video reasoning performance across multiple benchmarks.

cs.CV↗

arXiv2025

Low-dimensionality-induced tunable ferromagnetism in SrRuO$_3$ ultrathin films

Quantum materials near electronic or magnetic phase boundaries exhibit enhanced tunability, as their emergent properties become highly sensitive to external perturbations. Here, we demonstrate precise control of ferromagnetism in a SrRuO$_3$ ultrathin film, where a high density of states (DOS), arising from low-dimensional quantum states, places the system at the crossover between a non-magnetic and bulk ferromagnetic state. Using spin- and angle-resolved photoemission spectroscopy (SRPES/ARPES), transport measurements, and theoretical calculations, we systematically tune the Fermi level via electron doping across the high-DOS point. We directly visualize the spin-split band structure and reveal its influence on both magnetic and transport properties. Our findings provide compelling evidence that magnetism can be engineered through DOS control at a phase crossover, establishing a pathway for the rational design of tunable quantum materials.

cond-mat.str-el↗

arXiv2025

BloomIntent: Automating Search Evaluation with LLM-Generated Fine-Grained User Intents

If 100 people issue the same search query, they may have 100 different goals. While existing work on user-centric AI evaluation highlights the importance of aligning systems with fine-grained user intents, current search evaluation methods struggle to represent and assess this diversity. We introduce BloomIntent, a user-centric search evaluation method that uses user intents as the evaluation unit. BloomIntent first generates a set of plausible, fine-grained search intents grounded on taxonomies of user attributes and information-seeking intent types. Then, BloomIntent provides an automated evaluation of search results against each intent powered by large language models. To support practical analysis, BloomIntent clusters semantically similar intents and summarizes evaluation outcomes in a structured interface. With three technical evaluations, we showed that BloomIntent generated fine-grained, evaluable, and realistic intents and produced scalable assessments of intent-level satisfaction that achieved 72% agreement with expert evaluators. In a case study (N=4), we showed that BloomIntent supported search specialists in identifying intents for ambiguous queries, uncovering underserved user needs, and discovering actionable insights for improving search experiences. By shifting from query-level to intent-level evaluation, BloomIntent reimagines how search systems can be assessed -- not only for performance but for their ability to serve a multitude of user goals.

cs.HC↗

arXiv2025

CoT-Segmenter: Enhancing OOD Detection in Dense Road Scenes via Chain-of-Thought Reasoning

Effective Out-of-Distribution (OOD) detection is criti-cal for ensuring the reliability of semantic segmentation models, particularly in complex road environments where safety and accuracy are paramount. Despite recent advancements in large language models (LLMs), notably GPT-4, which significantly enhanced multimodal reasoning through Chain-of-Thought (CoT) prompting, the application of CoT-based visual reasoning for OOD semantic segmentation remains largely unexplored. In this paper, through extensive analyses of the road scene anomalies, we identify three challenging scenarios where current state-of-the-art OOD segmentation methods consistently struggle: (1) densely packed and overlapping objects, (2) distant scenes with small objects, and (3) large foreground-dominant objects. To address the presented challenges, we propose a novel CoT-based framework targeting OOD detection in road anomaly scenes. Our method leverages the extensive knowledge and reasoning capabilities of foundation models, such as GPT-4, to enhance OOD detection through improved image understanding and prompt-based reasoning aligned with observed problematic scene attributes. Extensive experiments show that our framework consistently outperforms state-of-the-art methods on both standard benchmarks and our newly defined challenging subset of the RoadAnomaly dataset, offering a robust and interpretable solution for OOD semantic segmentation in complex driving environments.

cs.CV↗