arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2610.05294

Precision measurement of ocean tides using cosmic-ray muons

Jiwon Seo·Jongseok Chung·Chang Hyon Ha·TongZhou Huang·Jinyoung Kim·Sooa Kim·Hani Kimku·Byoung-cheol Koh·Minsu Kwak·Sihyun Lee·Yujin Lee
View original source ↗Read source document ↗Export metadata ↓

Abstract

Cosmic-ray muons provide a natural probe of the integrated mass along their trajectories. Here we show that cosmic-ray muons can monitor ocean-tide-induced variations in seawater overburden within an underwater tunnel. The observed modulation closely tracks independent tide-gauge measurements, yielding an attenuation response coefficient of $k=43.2\pm1.0$~counts$\rm /h/m$ and resolving meter-scale variations in seawater overburden. A spatial muography scan validates the overburden model, confirming that the seawater contribution is essential to reproduce the observed attenuation. Unlike conventional tide gauges that measure sea level locally, muography measures the integrated overburden above the detector. These results demonstrate that muography can quantitatively resolve small, time-dependent variations in environmental overburden, providing a new approach to monitoring dynamic natural systems.

Explore related subjects

hep-exastro-ph.IM

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Jiwon Seo, Jongseok Chung, Chang Hyon Ha, TongZhou Huang, Jinyoung Kim, Sooa Kim, Hani Kimku, Byoung-cheol Koh, Minsu Kwak, Sihyun Lee, Yujin Lee. 2026-10-04. Precision measurement of ocean tides using cosmic-ray muons. https://arxiv.org/abs/2610.05294

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Measurement of the Muon Flux at the Sanford Underground Research Facility with the LUX-ZEPLIN Dark Matter Detector

High-energy cosmic-ray muons reaching deep underground laboratories can cause events in detectors that mimic signals expected from dark matter particles, neutrinos, or rare decays. Knowledge of the muon flux and energy spectrum is important for evaluating the background rate caused by muons and their secondaries. In this paper, we report the measurement of the cosmic-ray muon flux in the Davis Campus of the Sanford Underground Research Facility with the LUX-ZEPLIN detector. Using 366.4~days of exposure, the muon rate through the detector was measured as $10.94\pm0.17_\textrm{stat.}~\textrm{day}^{-1}$ with energy thresholds of 20~MeV in the inner xenon detector and 8 MeV in the outer liquid scintillator detector. This rate corresponds to a muon flux of $(5.09\pm0.08_\textrm{stat.}\pm0.10_\textrm{sys.})\times10^{-9}~\textrm{cm}^{-2}\textrm{s}^{-1}$ in the Davis Cavern.

hep-ex↗
arXiv2026

Search for Visible Dark Photon Decays at the Future SHINE Facility with the DarkSHINE Experiment

We study the sensitivity of the proposed DarkSHINE experiment to displaced dark photon decays, $A'\to e^+e^-$, using an 8~GeV electron beam incident on a tungsten target. We consider $2m_e<m_{A'}<2m_μ$ and assume a unit branching fraction to electron--positron pairs. Signal events generated at tree level with \textsc{CalcHEP} are propagated through a detailed \textsc{Geant4} detector simulation. A close tracker, graph-neural-network-based track reconstruction, and displaced vertex selections suppress prompt pair-production and photon-conversion backgrounds, while calorimeter and invariant-mass requirements render hadronic backgrounds negligible. Extrapolation of the residual prompt-background distribution yields 0.3 expected events for $9\times10^{14}$ electrons on target. The median expected 90\% confidence-level exclusion covers masses of approximately 30--70~MeV and kinetic mixing parameters from approximately $5\times10^{-5}$ to $2\times10^{-4}$. This visible decay search complements DarkSHINE searches for invisible dark photon decays.

hep-ex↗
arXiv2026

Design optimization of the inter-electrode structures in DC-RSD

DC-coupled Resistive Silicon Detectors (RSD) share charge among electrodes through a resistive n$^+$ surface layer, and the choice of inter-electrode structure --- a trench, a resistive strip, or no structure at all --- directly determines the achievable position resolution and its uniformity. This paper addresses the question of which structure best optimises the spatial resolution. To answer it quantitatively, DCRSD_SurfaceSimulator was developed, a ROOT-based tool that models the resistive surface as a two-dimensional Kirchhoff resistive network and solves for charge sharing as a function of hit position, surface resistivity, and inter-electrode structure. The simulator is validated against test-beam data from FBK DC-RSD sensors with 300, 500, and 1000~$μ$m pixel pitch, reproducing the position resolution, its spatial uniformity, and the signal-sharing templates correctly. Using the validated simulator, trenches, resistive strips, and no containment are then compared on position resolution and its spatial uniformity, inter-electrode resistance, and signal leakage to outer pixels. Resistive strips are found to outperform trenches in resolution by approximately 25\% for all tested strip resistances (500--2000~$Ω$) and input impedances (0--100~$Ω$), at a surface resistivity of 1000~$Ω/\square$, and trace the origin of this difference to the spatial gradient of the charge-sharing fraction: trenches produce a markedly weaker and less uniform gradient, particularly away from the pixel centre, than either a resistive strip or a bare resistive surface.

hep-ex↗