arXiv Science⌕ Search

arXiv subjects

Jian Yang

Publications and source records attributed to Jian Yang.

At least 109 records · Page 6Linked to original sources
arXiv2026

OrthoTryOn: Geometric Orthogonalization for Conflict-Free Unified Fashion Generation

Unified fashion generation integrates tasks like virtual try-on and garment reconstruction into a single model to reduce task-specific adaptation costs. However, naive parameter sharing across semantically distinct tasks induces negative transfer through severe inter-task gradient conflict. We propose OrthoTryOn, a unified framework mitigating this interference within a shared Low-Rank Adaptation (LoRA) module. Its Orthogonal Subspace Projection (OSP) applies task-specific orthogonal rotations to bottleneck features, mapping them into decorrelated coordinate frames. To address residual semantic coupling at inference time, we further propose Fisher-guided Negative Guidance (FNG), a parameter-free strategy that utilizes diagonal Fisher information to quantify inter-task sensitivity overlap and explicitly repels generation trajectories from the most confusable task via Classifier-Free Guidance. Extensive experiments demonstrate that OrthoTryOn avoids the severe performance degradation typical of naive unified training and even surpasses independently trained task-specific models, achieving state-of-the-art results across multiple benchmarks while generalizing robustly across diverse diffusion backbones. Code is available at https://github.com/NJU-PCALab/OrthoTryOn.

cs.CV↗
arXiv2026

Agentic evolution of physically constrained foundation models

Artificial intelligence increasingly drives automated scientific discovery, yet contemporary generalist agents lack physical grounding, frequently hallucinating hardware-incompatible designs. Here, we present a physically grounded, multi-agent discovery engine that autonomously architects hardware-compliant computing systems. Anchored by an Evolutionary Knowledge Graph structuring past scientific innovations, the framework extracts an "algorithmic Chain-of-Thought" to transform blind stochastic search into directed structural evolution. Applied to the extreme testbed of foundation model deployment, the engine evolved two hardware-aware compression methodologies surpassing human-engineered heuristics: Q-Enhance mitigates long-context accuracy loss in dense models, and MoE-Salient-AQ outperforms state-of-the-art manual sparse Mixture-of-Experts designs by 3.7% at sub-3-bit regimes. Utilizing a bandwidth-efficient Sensitivity Profile, we successfully deployed a massive 235-billion-parameter model onto a constrained dual-A100 server, reducing memory requirements by 75% with a marginal 0.64% accuracy degradation. By transforming unconstrained combinatorial search into knowledge-driven autonomy, this establishes a scalable hardware-software co-design paradigm for machine-driven discovery within strict physical boundaries.

cs.AI↗
arXiv2026

M4-SAR: A Multi-Resolution, Multi-Polarization, Multi-Scene, Multi-Source Dataset and Benchmark for optical-SAR Object Detection

Single-source remote sensing object detection using optical or SAR images struggles in complex environments. Optical images offer rich textural details but are often affected by low-light, cloud-obscured, or low-resolution conditions, reducing the detection performance. SAR images are robust to weather, but suffer from speckle noise and limited semantic expressiveness. Optical and SAR images provide complementary advantages, and fusing them can significantly improve the detection accuracy. However, progress in this field is hindered by the lack of large-scale, standardized datasets. To address these challenges, we propose a new comprehensive dataset for optical-SAR fusion object detection, named Multi-resolution, Multi-polarization, Multi-scene, Multi-source SAR dataset (M4-SAR). It contains 112,174 instance-level aligned image pairs and nearly one million labeled instances with arbitrary orientations, spanning six key categories. To enable standardized evaluation, we develop a unified benchmarking toolkit that integrates six state-of-the-art multi-source fusion methods. Additionally, we propose E2E-OSDet, a novel end-to-end multi-source fusion detection framework that mitigates cross-domain discrepancies and establishes a robust baseline for future studies. Extensive experiments on M4-SAR demonstrate that fusing optical and SAR data can improve mAP by 5.7\% over single-source inputs, with particularly significant gains in complex environments. The dataset and code are publicly available at https://github.com/wchao0601/M4-SAR.

cs.CV↗
arXiv2026

PhysFlow: Frequency Decoupled with Dual-Field Rectified Flow for Remote Photoplethysmography

Remote Photoplethysmography (rPPG) enables contactless pulse estimation from facial videos, serving as a vital tool for health monitoring. However, current deep learning methods often struggle under complex disturbances, particularly varying illumination, facial expressions, and unconstrained head movements. In such scenarios, subtle physiological signals are easily dominated by external interference, making the recovered rPPG waveform unstable and unreliable. One important reason is that most existing methods directly model the rPPG signal in a unified manner, where different signal components are coupled during reconstruction. This makes it difficult to preserve weak pulse-related variations when strong disturbance-induced changes are present. To address this challenge, we propose PhysFlow, a frequency-decoupled dual-field rectified flow framework tailored for robust rPPG estimation. Specifically, the ground-truth rPPG signal is decomposed into trend and amplitude components, which are used as separate supervisory targets. Based on the extracted facial features, PhysFlow learns two component-specific conditional velocity fields to model the two components separately. This design reduces mutual interference between different components and improves the robustness of rPPG reconstruction under complex disturbances. Moreover, the rectified flow formulation enables efficient waveform reconstruction with only a few ordinary differential equation (ODE) integration steps. Extensive experiments on multiple benchmark datasets demonstrate that PhysFlow outperforms state-of-the-art methods in both heart-rate estimation and rPPG waveform reconstruction across diverse challenging scenarios.

cs.CV↗
arXiv2026

HardSecBench: Benchmarking the Security Awareness of LLMs for Hardware Code Generation

Large language models (LLMs) are increasingly used for hardware and firmware code generation, but existing studies primarily evaluate functional correctness while largely overlooking security. However, LLM-generated code that appears functionally sound may embed security flaws which could induce catastrophic damages after deployment. This critical research gap motivates us to design a benchmark for assessing security awareness under realistic specifications. In this work, we introduce HardSecBench, a benchmark with 924 tasks spanning Verilog Register Transfer Level (RTL) and firmware-level C, covering 76 hardware-relevant Common Weakness Enumeration (CWE) entries. Each task includes a structured specification, a secure reference implementation, and executable tests. To automate artifact synthesis, we propose a multi-agent pipeline that decouples synthesis from verification and grounds evaluation in execution evidence, enabling reliable evaluation. We evaluate diverse LLMs and find that they often satisfy functional requirements while leaving security risks. We also find that security results vary with prompting. These findings highlight pressing challenges and offer actionable insights for future advancements in LLM-assisted hardware design. Our data and code are available at https://github.com/chenqirui2002/HardSecBench.

cs.CR↗
arXiv2026

One-Shot Novel View and Pose Human Image Synthesis via 3D Prior Guided Diffusion Model

This paper addresses the challenge of one-shot novel view and pose human image synthesis. The existing methods transfer the reference human image to a target pose using a set of 2D pose keypoints or synthesize human images based on generalizable human NeRF which uses human model priors to extract point-wise features. However, pose transfer based methods can not handle complex human pose using ambiguous 2D pose as the condition, while generalizable human NeRFs may be inaccurate to recover occluded/invisiable human parts without extracted reliable features. To solve these problems, we propose a novel approach for novel view and pose synthesis from a singe human image via conditional denoising diffusion model. Our diffusion model divides the novel view and pose synthesis problem into a sequence of conditional denoising steps. Specifically, to generate humans with complex and arbitrary poses, we introduce 3D human priors, i.e., 3D normal map and color prompt, as geometry and color conditions into the generation process. By transferring the reference human into the target human with a series of diffusion steps, our diffusion model enables high-quality synthesis including the occluded/invisible parts. Further, we propose a self-reconstruction based customized refinement to enhance fine details when tested on novel persons.Experimental results on different public datasets demonstrate that our approach significantly outperforms previous methods and also shows better generalization ability across datasets. The code will be made publicly available at https://github.com/Yankeegsj/3DPGDM.

cs.CV↗
arXiv2026

Spiking Pyramid Wavelet Transformation for High-efficient and Low-energy Image Restoration

Spiking neural networks (SNNs) have garnered significant interest in computer vision due to their potential for efficiency and biological inspiration. While spiking CNN-based methods have shown promise for image restoration (IR) tasks, their performance is constrained by the inherent receptive field limitations of CNN operations. In the paper, we explore the benefits of discrete wavelet transformation and propose a spiking pyramid wavelet-based model (SPWM) for high-efficient and low-energy target. Specifically, we develop a spiking dual pyramid wavelet (SDPW) block to model long-range dependency and exploit the properties of the degradation in the wavelet domain. Experimental results on several benchmarks demonstrate that SPWM significantly lowers computational costs and energy consumption while maintaining image quality. Our method showcases the potential of SNNs in the field of IR, offering new insights for future applications of resource-limited devices.

cs.CV↗
arXiv2026

Enhancing Multilingual Reasoning via Steerable Model Merging

Model merging is an effective technique for composing the capabilities of a multilingual model and a reasoning model. It has achieved promising generalization in multilingual reasoning tasks by aligning feature spaces of different models. However, the merged single model often fails to address the conflicts between source models, leading to suboptimal performance. In other words, the one-size-fits-all merging strategy may not align with the characteristics of different inputs which may require prioritizing certain models over others. To this end, we propose a Steerable Model Merging (ST-Merge) framework to modulate the contribution of each source model. To realize this idea, we introduce a gated cross-attention mechanism to weight or filter the two attended source models in an adaptive manner. Extensive experiments demonstrate that ST-Merge consistently outperforms multiple strong baselines on four multilingual reasoning benchmarks across 21 different languages.

cs.CL↗
arXiv2026

FUSER: Feed-Forward MUltiview 3D Registration Transformer and SE(3)$^N$ Diffusion Refinement

Registration of multiview point clouds conventionally relies on extensive pairwise matching to build a pose graph for global synchronization, which is computationally expensive and inherently ill-posed without holistic geometric constraints. This paper proposes FUSER, the first feed-forward multiview registration transformer that jointly processes all scans in a unified, compact latent space to directly predict global poses without any pairwise estimation. To maintain tractability, FUSER encodes each scan into low-resolution superpoint features via a sparse 3D CNN that preserves absolute translation cues, and performs efficient intra- and inter-scan reasoning through a Geometric Alternating Attention module. Particularly, we transfer 2D attention priors from off-the-shelf foundation models to enhance 3D feature interaction and geometric consistency. Building upon FUSER, we further introduce FUSER-DF, an SE(3)$^N$ diffusion refinement framework to correct FUSER's estimates via denoising in the joint SE(3)$^N$ space. FUSER acts as a surrogate multiview registration model to construct the denoiser, and a prior-conditioned SE(3)$^N$ variational lower bound is derived for denoising supervision. Extensive experiments on 3DMatch, ScanNet and ArkitScenes demonstrate that our approach achieves the superior registration accuracy and outstanding computational efficiency.

cs.CV↗
arXiv2026

LoopCoder-v2: Only Loop Once for Efficient Test-Time Computation Scaling

Looped Transformers scale latent computation by repeatedly applying shared blocks, but sequential looping increases latency and KV-cache memory with the loop count. Parallel loop Transformers (PLT) alleviate this cost through cross-loop position offsets (CLP) and shared-KV gated sliding-window attention, making loop count a practical design choice. We therefore study PLT loop-count selection through a gain--cost view: an extra loop may refine representations, but CLP also introduces a positional mismatch at each loop boundary. We instantiate this study by training LoopCoder-v2, a family of 7B PLT coders with different loop counts, from scratch on 18T tokens, followed by matched instruction tuning and evaluation. Empirically, the two-loop variant delivers broad gains over the non-looped baseline across code generation, code reasoning, agentic software engineering, and tool-use benchmarks, improving SWE-bench Verified from 43.0 to 64.4 points and Multi-SWE from 14.0 to 31.0 points. In contrast, variants with three or more loops regress, revealing a strongly non-monotonic loop-count effect. Our diagnostics show that loop 2 provides the main productive refinement, while later loops yield diminishing, oscillatory updates and reduced representational diversity. Because the CLP-induced mismatch remains roughly fixed as refinement gains shrink, the offset cost increasingly dominates. This gain--cost trade-off explains PLT's saturation at two loops and provides diagnostics for loop-count selection.

cs.LG↗
arXiv2026

Towards UAV Image Dehazing: A UAV Atmospheric Scattering Model, Benchmark, and Geometry-Aware Deep Unfolding Network

In UAV applications, haze significantly obscures distant details and weaken structural information, hindering the recovery of details. Current UAV scenarios still face two key challenges: (i) paired hazy/clean images from the real world are unobtainable, while the classical atmospheric scattering model is inadequate for modeling the spatially non-uniform haze in UAV imagery; (ii) existing dehazing methods struggle to remove the heavy haze accumulated in the upper regions of UAV images. To address these issues, we first propose a UAV Atmospheric Scattering Model (UASM), which explicitly incorporates flight altitude, viewing pitch, and extinction to characterize the non-uniform haze distribution in UAV imaging. Based on UASM, we develop a physics-driven dehazing framework, termed Geometry-aware Proximal Deep Unfolding Network (GP-DUN). Specifically, GP-DUN consists of three key modules: a Latent Geometry Estimator (LGE) that infers transmittance consistent with UAV imaging geometry, a Geometry-aware Gradient Descent Module (GeoGDM) that embeds UASM into the data-fidelity term and performs physics-consistent closed-form updates, and an Pooling-Expert Proximal Mapping Module (PE-PMM) that learns an implicit prior to restore textures and structures beyond the capability of explicit physical modeling. In addition, we further construct UASM-HazeSet, which provides controllable paired synthetic data together with 2,285 real UAV haze images for testing. Extensive experiments show that GP-DUN consistently outperforms existing methods on both UASM-HazeSet and real UAV haze benchmarks.

cs.CV↗
arXiv2026

MosaicQuant: Inlier-Outlier Disaggregation for Unified 4-Bit LLM Quantization

4-bit quantization significantly reduces the memory footprint and accelerates the inference of large language models (LLMs). However, its limited bit-width representation struggles to faithfully capture both dense common values (\emph{inliers}) and rare large-magnitude values (\emph{outliers}), causing substantial accuracy degradation. Existing mixed-precision methods mitigate this by retaining outliers in high precision, but at the cost of breaking the uniformity of low-bit execution, introducing precision conversion and extra data movement that undermine practical speedup. We propose \textbf{MosaicQuant}, a unified 4-bit LLM quantization paradigm built on a novel principle of \emph{inlier--outlier disaggregation}. Rather than elevating outlier precision, MosaicQuant quantizes the full weight matrix into a dense 4-bit base component, where inliers are captured faithfully while outlier are inevitably quantized. A sparse 4-bit residual component is then introduced to compensate for these quantization errors, selectively targeting the most error-critical weight blocks where output distortion is shown to be concentrated. However, a unified representation alone is insufficient, as naïvely executing the sparse residual as a separate kernel still breaks the unified low-bit inference pipeline. To bridge this gap, we introduce \textbf{ZipperEngine}, which fuses sparse block computation into the dense 4-bit GEMM kernel via an overlapped pipeline, unifying not only the representation but also the execution into a single coherent low-bit inference pipeline. Extensive experiments on LLaMA3 and Qwen3 demonstrate that MosaicQuant preserves near-FP16 accuracy while achieving up to $1.24\times$ speedup over the W16A16 baseline.

cs.LG↗
arXiv2026

LiAuto-GeoX: Efficient Grounded Driving Transformer

Dense 3D reconstruction has demonstrated immense potential for spatial understanding, yet its viability as a real-time, onboard representation for autonomous driving remains an open challenge. Existing large-scale visual geometry models typically require substantial computational resources and lack the long-range geometric fidelity, surround-view consistency, and real-time efficiency demanded by dynamic driving environments. To bridge this gap, we present \textbf{LiAuto-GeoX}, an efficient grounded driving transformer designed for deployable, ego-centric 3D scene understanding. Our approach begins by learning a high-capacity driving geometry model from large-scale surround-view data, utilizing sparse LiDAR priors to provide robust geometric grounding in distant, ambiguous, or structure-sparse regions. We then instantiate this capability into a highly compact 155M-parameter onboard model through a novel geometry-preserving distillation framework. This framework employs mask-guided depth-aware distillation to retain fine-grained metric structures by emphasizing geometrically informative regions, and relative-pose relational distillation to enforce cross-view spatial consistency through pose-induced geometric relations. Extensive evaluations reveal that \textbf{LiAuto-GeoX} runs at 220 FPS on KITTI while maintaining high-fidelity dense reconstruction, enabling real-time deployment. The learned geometry transfers seamlessly to downstream autonomy tasks, achieving 90.6 PDMS in trajectory prediction, 24.63 mIoU in occupancy prediction, and 47.67 IoU in future-frame prediction. These all demonstrate that efficient dense 3D reconstruction can transcend its traditional role as a perception target to serve as a scalable, foundational geometric representation for next-generation autonomous driving.

cs.CV↗
arXiv2026

HyperTool: Beyond Step-Wise Tool Calls for Tool-Augmented Agents

Tool-augmented LLM agents commonly rely on step-wise atomic tool calls, where each invocation, observation, and value transfer is exposed in the main reasoning trace. This creates an \emph{execution-granularity mismatch}: locally deterministic tool workflows are unfolded into repeated model-visible decisions, consuming context and forcing the model to manage low-level dataflow in the trace. We introduce \textbf{HyperTool}, a unified executable MCP-style tool interface that changes the model-visible unit of tool execution. A model invokes HyperTool with a code block that can call existing tools through their original schemas, manipulate returned values, and pass intermediate results locally, folding deterministic tool subroutines into a single outer call. To train models to use this interface, we synthesize HyperTool-format trajectories from cross-tool compositional tasks and verify them in real MCP environments. On MCP-Universe, HyperTool improves average accuracy from 15.69\% to 35.29\% on Qwen3-32B and from 9.93\% to 33.33\% on Qwen3-8B, and surpass GPT-OSS and Kimi-k2.5 on average accuracy, showing that our HyperTool can substantially improve multi-step tool use.

cs.CL↗
arXiv2026

Self-Consistent Generative Paths via Admissible Random Variational Transport

Modern generative models often define an entire probability path from a simple prior to the data law, rather than only an endpoint map. Diffusion models follow stochastic denoising paths, flow matching learns transport fields, consistency and distillation methods compress paths into one or a few steps, adversarial models match terminal distributions, and VAEs generate through latent kernels. Existing unifying views mainly describe how such paths are constructed. We study a complementary question: when is a generated probability path self-consistent? We define a self-consistent generative path as a random fixed point of admissible local variational transport corrections. In this framework, a local correction is specified by a random variational transport operator combining a divergence or geometry term, an energy term, and a structural constraint. The framework contains random regularized optimal-transport proximal steps as a structured instance, while also allowing non-OT divergences, latent kernels, adversarial constraints, causal discrete kernels, and terminal one-step maps. The theory yields a random fixed-point path residual (R-FPR), which measures the gap between the actual generated path and an admissible local correction. We prove well-posedness, random fixed-point existence and attraction, non-contractive existence, residual-to-generation error bounds, empirical residual concentration, proxy perturbation bounds, continuous-time limits, and operator-level generalization with model-specific corollaries. The resulting theory turns endpoint matching into path self-consistency testing and provides a residual-control principle for diagnosing failures, regularizing training, and guiding adaptive sampling across diffusion, flow, one-step, VAE, GAN/WGAN, and autoregressive generators.

cs.LG↗
arXiv2026

HiMat: DiT-based Ultra-High Resolution SVBRDF Generation

Creating ultra-high-resolution spatially varying bidirectional reflectance functions (SVBRDFs) is critical for photorealistic 3D content creation, to faithfully represent fine-scale surface details required for close-up rendering. However, achieving 4K generation faces two key challenges: (1) the need to synthesize multiple reflectance maps at full resolution, which multiplies the pixel budget and imposes prohibitive memory and computational cost, and (2) the requirement to maintain strong pixel-level alignment across maps at 4K, which is particularly difficult when adapting pretrained models designed for the RGB image domain. We introduce HiMat, a diffusion-based framework tailored for efficient and diverse 4K SVBRDF generation. To address the first challenge, HiMat performs generation in a high-compression latent space via DC-AE, and employs a pretrained diffusion transformer with linear attention to improve per-map efficiency. To address the second challenge, we propose CrossStitch, a lightweight convolutional module that enforces cross-map consistency without incurring the cost of global attention. Our experiments show that HiMat achieves high-fidelity 4K SVBRDF generation with superior efficiency, structural consistency, and diversity compared to prior methods. Beyond materials, our framework also generalizes to related applications such as intrinsic decomposition.

cs.CV↗
arXiv2026

Muses: Designing, Composing, Generating Nonexistent Fantasy 3D Creatures without Training

We present Muses, the first training-free method for fantastic 3D creature generation in a feed-forward paradigm. Previous methods, which rely on part-aware optimization, manual assembly, or 2D image generation, often produce unrealistic or incoherent 3D assets due to the challenges of intricate part-level manipulation and limited out-of-domain generation. In contrast, Muses leverages the 3D skeleton, a fundamental representation of biological forms, to explicitly and rationally compose diverse elements. This skeletal foundation formalizes 3D content creation as a structure-aware pipeline of design, composition, and generation. Muses begins by constructing a creatively composed 3D skeleton with coherent layout and scale through graph-constrained reasoning. This skeleton then guides a voxel-based assembly process within a structured latent space, integrating regions from different objects. Finally, image-guided appearance modeling under skeletal conditions is applied to generate a style-consistent and harmonious texture for the assembled shape. Extensive experiments establish Muses' state-of-the-art performance in terms of visual fidelity and alignment with textual descriptions, and potential on flexible 3D object editing. Project page: https://luhexiao.github.io/Muses.github.io/.

cs.CV↗
arXiv2026

Conditional Random Ordered Transport Spaces

A small Wasserstein distance does not certify that a transformation is admissible. In evidence-constrained, semantic, causal, physical, monotone, or risk-sensitive learning, one must ask not only how far two probability laws are, but whether mass has moved in a direction allowed by available information. We introduce conditional random ordered transport spaces (CROTS), a class of \(L^0\)-valued spaces of random probability measures equipped with a Wasserstein ambient metric, a closed stochastic order, hard and soft ordered transport discrepancies, and a conditional risk functional for evaluating order violation under an evidence sigma-field. The central object is an order-admissible transport geometry for random measure-valued dynamics, distinct from cone-valued metrics, ordered Kantorovich constructions, random Wasserstein spaces alone, and model-specific residuals for generative paths. We develop the foundations of CROTS as a space theory for reliable distributional learning. The results include well-posedness and duality for hard and soft ordered transport, soft-to-hard variational convergence, measurability and completeness of the random lifted space, reductions to classical Wasserstein and ordered geometries, ordered geodesics, constrained barycenters and projections, conditional risk-transport duality, and separation of order-violating distributions. The main stability theorem shows that random learning dynamics may converge in the ambient Wasserstein metric while its local admissibility leakage follows a separate conditional order-risk recursion. The resulting asymptotic order-risk floor provides a mathematical language for evidence overreach, ordered distribution shift, robustness failure, and admissible distributional dynamics.

cs.LG↗