arXiv Science⌕ Search

arXiv subjects

Jeremy Levy

Publications and source records attributed to Jeremy Levy.

At least 73 records · Page 4Linked to original sources
arXiv2016

Micrometer-scale ballistic transport of electron pairs in LaAlO3/SrTiO3 nanowires

High-mobility complex-oxide heterostructures and nanostructures offer new opportunities for extending the paradigm of quantum transport beyond the realm of traditional III-V or carbon-based materials. Recent quantum transport investigations with LaAlO$_3$/SrTiO$_3$-based quantum dots have revealed the existence of a strongly correlated phase in which electrons form spin-singlet pairs without becoming superconducting. Here we report evidence for micrometer-scale ballistic transport of electron pairs in quasi-one-dimensional (quasi-1D) LaAlO$_3$/SrTiO$_3$ nanowire cavities. In the paired phase, Fabry-Perot-like quantum interference is observed, in sync with conductance oscillations observed in the superconducting regime (at zero magnetic field). Above a critical magnetic field $B_p$, electron pairs unbind and conductance oscillations shift with magnetic field. These experimental observations extend the regime of ballistic electronic transport to strongly correlated phases.

cond-mat.mes-hall↗
arXiv2016

Development and Evaluation of a Tutorial to Improve Students' Understanding of a Lock-in amplifier

A lock-in amplifier is a versatile instrument frequently used in physics research. However, many students struggle with the basic operating principles of a lock-in amplifier which can lead to a variety of difficulties. To improve students' understanding, we have been developing and evaluating a research-based tutorial which makes use of a computer simulation of a lock-in amplifier. The tutorial is based on a field-tested approach in which students realize their difficulties after predicting the outcome of simulated experiments involving a lock-in amplifier and check their predictions using the simulated lock-in amplifier. Then, the tutorial provides guidance and strives to help students develop a coherent understanding of the basics of a lock-in amplifier. The tutorial development involved interviews with physics faculty members and graduate students and iteration of many versions of the tutorial with professors and graduate students. The student difficulties with lock-in amplifiers and the development and assessment of the research-based tutorial to help students develop a functional understanding of this device are discussed.

physics.ed-ph↗
arXiv2016

Improving Students' Understanding of Lock-In Amplifiers

The lock-in amplifier is a versatile instrument frequently used in physics research. However, many students struggle with the basic operating principles of a lock-in amplifier which can lead to a variety of difficulties. To improve students' understanding, we have been developing and evaluating a research-based tutorial which makes use of a computer simulation of a lock-in amplifier. The tutorial allows students to realize their conceptual difficulties by comparing their predictions about how a lock-in amplifier will behave with the outcome of simulated experiments. After being confronted with discrepancies between their predictions and the lock-in amplifier results, the tutorial targets the common difficulties that students have and leads them to develop a deeper understanding of the principles of lock-in amplification.

physics.ed-ph↗
arXiv2016

Improving Students' Understanding of Lock-in Amplifiers

A lock-in amplifier is a versatile instrument frequently used in physics research. However, many students struggle with the basic operating principles of a lock-in amplifier which can lead to a variety of difficulties. To improve students' understanding, we have been developing and evaluating a research-based tutorial which makes use of a computer simulation of a lock-in amplifier. The tutorial is based on a field-tested approach in which students realize their difficulties after predicting the outcome of simulated experiments involving a lock-in amplifier and check their predictions using the simulated lock-in amplifier. Then, the tutorial guides and helps students develop a coherent understanding of the basics of a lock-in amplifier. The tutorial development involved interviews with physics faculty members and graduate students and iteration of many versions of the tutorial with professors and graduate students. The student difficulties and the development and assessment of the research-based tutorial are discussed.

physics.ed-ph↗
arXiv2014

Nanoscale Phenomena in Oxide Heterostructures

Recent advances in creating complex oxide heterostructures, interfaces formed between two different transition metal oxides, have heralded a new era of materials and physics research, enabling a uniquely diverse set of coexisting physical properties to be combined with an ever- increasing degree of experimental control. Already, these systems have exhibited such varied phenomena as superconductivity, magnetism, and ferroelasticity, all of which are gate-tunable, demonstrating their promise for fundamental discovery and technological innovation alike. To fully exploit this richness, it is necessary to understand and control the physics on the smallest scales, making the use of nanoscale probes essential. Using the prototypical LaAlO$_3$/SrTiO$_3$ interface as a guide, we explore the exciting developments in the physics of oxide-based heterostructures, with a focus on nanostructures and the nanoscale probes employed to unravel their complex behavior.

cond-mat.mes-hall↗
arXiv2013

Room-Temperature Electronically-Controlled Ferromagnetism at the LaAlO3/SrTiO3 Interface

Reports of emergent conductivity, superconductivity, and magnetism at oxide interfaces have helped to fuel intense interest in their rich physics and technological potential. Here we employ magnetic force microscopy to search for room-temperature magnetism in the well-studied LaAlO3/SrTiO3 system. Using electrical top gating to deplete electrons from the oxide interface, we directly observe an in-plane ferromagnetic phase with sharply defined domain walls. Itinerant electrons, introduced by a top gate, align antiferromagnetically with the magnetization, at first screening and then destabilizing it as the conductive state is reached. Subsequent depletion of electrons results in a new, uncorrelated magnetic pattern. This newfound control over emergent magnetism at the interface between two non-magnetic oxides portends a number of important technological applications.

cond-mat.mes-hall↗
arXiv2013

Electro-Mechanical Response of Top-Gated LaAlO3/SrTiO3 Heterostructures

LaAlO3/SrTiO3 heterostructures are known to exhibit a sharp, hysteretic metal-insulator transition (MIT) with large enhanced capacitance near depletion. To understand the physical origin of this behavior, the electromechanical response of top-gated LaAlO3/SrTiO3 heterostructures is probed using two simultaneous measurement techniques: piezoforce microscopy (PFM) and capacitance spectroscopy. PFM measurements reveal local variations in the hysteretic response, which is directly correlated with capacitance measurements. The enhanced capacitance at the MIT is linked to charging/discharging dynamics of nanoscale conducting islands, which are revealed through PFM imaging and time-resolved capacitance and piezoresponse measurements.

cond-mat.mes-hall↗
arXiv2013

Anomalous Transport in Sketched Nanostructures at the LaAlO3/SrTiO3 Interface

The oxide heterostructure LaAlO3/SrTiO3 supports a two-dimensional electron liquid with a variety of competing phases including magnetism, superconductivity and weak antilocalization due to Rashba spin-orbit coupling. Further confinement of this 2D electron liquid to the quasi-one-dimensional regime can provide insight into the underlying physics of this system and reveal new behavior. Here we describe magnetotransport experiments on narrow LaAlO3/SrTiO3 structures created by a conductive atomic force microscope lithography technique. Four-terminal local transport measurements on ~10-nm-wide Hall bar structures yield longitudinal resistances that are comparable to the resistance quantum h/e2 and independent of the channel length. Large nonlocal resistances (as large as 10^4 ohms) are observed in some but not all structures with separations between current and voltage that are large compared to the 2D mean-free path. The nonlocal transport is strongly suppressed by the onset of superconductivity below ~200 mK. The origin of these anomalous transport signatures is not understood, but may arise from coherent transport defined by strong spin-orbit coupling and/or magnetic interactions.

cond-mat.mes-hall↗
arXiv2012

Superconducting LaAlO3/SrTiO3 Nanowires

We report superconductivity in quasi-1D nanostructures created at the LaAlO3/SrTiO3 interface. Nanostructures having line widths w~10 nm are formed from the parent two-dimensional electron liquid using conductive atomic force microscope lithography. Nanowire cross-sections are small compared to the superconducting coherence length in LaAlO3/SrTiO3 (w<<xi~100 nm), placing them in the quasi-1D regime. Broad superconducting transitions with temperature and finite resistances in the superconducting state well below Tc~200 mK are observed. V-I curves show switching between the superconducting and normal states that are characteristic of superconducting nanowires. The four-terminal resistance in the superconducting state shows an unusual dependence on the current path, varying by as much as an order of magnitude.

cond-mat.mes-hall↗
arXiv2012

Nonlocal Piezoresponse of LaAlO3/SrTiO3 Heterostructures

The hysteretic piezoelectric response in LaAlO3/SrTiO3 heterostructures can provide important insights into the mechanism for interfacial conductance and its metastability under various conditions. We have performed a variety of nonlocal piezoelectric force microscopy experiments on 3 unit cell LaAlO3/SrTiO3 heterostructures. A hysteretic piezoresponse is observed under various environmental and driving conditions. The hysteresis is suppressed when either the sample is placed in vacuum or the interface is electrically grounded. We present a simple physical model which can account for the observed phenomena.

cond-mat.mtrl-sci↗
arXiv2012

Three-dimensional polarization imaging of (Ba,Sr)TiO3:MgO composites

The dielectric tuning and loss of (Ba,Sr)TiO3:MgO bulk composites depend strongly on the connectivity and interaction among the two phases. To investigate this relationship, the polar structure and dynamics of these composites is mapped as a function of space and time using a pair of three-dimensional probes: second-harmonic confocal scanning optical microscopy (SH-CSOM), which maps ferroelectric polarization in three dimensions, and time-resolved scanning optical microscopy (TR-CSOM), which maps polarization dynamics along two spatial dimensions and one time dimension. SH-CSOM measurements reveal a high degree of homogeneity within the (Ba,Sr)TiO3 regions, while TR-CSOM measurements indicate that topologically connected regions respond with a spatially uniform phase.

cond-mat.other↗
arXiv2011

Spatial Analogue of Quantum Spin Dynamics via Spin-Orbit Interaction

We map electron spin dynamics from time to space in quantum wires with spatially uniform and oscillating Rashba spin-orbit coupling. The presence of the spin-orbit interaction introduces pseudo-Zeeman couplings of the electron spins to effective magnetic fields. We show that by periodically modulating the spin-orbit coupling along the quantum wire axis, it is possible to create the spatial analogue of spin resonance, without the need for any real magnetic fields. The mapping of time-dependent operations onto a spatial axis suggests a new mode for quantum information processing in which gate operations are encoded into the band structure of the material. We describe a realization of such materials within nanowires at the interface of LaAlO3/SrTiO3 heterostructures.

cond-mat.mes-hall↗
arXiv2011

Mechanisms for directed self-assembly of heteroepitaxial Ge/Si quantum dots with deterministic placement and sub-23nm spacing on SiC nanotemplates

Artificially ordered Ge quantum dot (QD) arrays, where confined carriers can interact via exchange coupling, may create unique functionalities such as cluster qubits and spintronic bandgap systems. Development of such arrays for quantum computing requires fine control over QD size and spatial arrangement on the sub-35 nm length scale. We employ fine-probe electron-beam irradiation to locally decompose ambient hydrocarbons onto a bare Si (001) surface. These carbonaceous patterns are annealed in UHV, forming ordered arrays of nanoscale SiC precipitates that serve as templates for subsequent Ge quantum dot self-assembly during heteroepitaxy. This templating approach has so far produced interdot spacings down to 22.5 nm, and smaller spacings should be possible. We investigate the templated feature evolution during UHV processing to identify key mechanisms that must be controlled in order to preserve pattern fidelity and reduce broadening of the quantum dot size distribution. A key finding is that the presence of a small background of excess carbon reduces Ge surface diffusion, thereby suppressing coarsening to relatively high temperatures. In fact, coarsening of the carbonaceous nanodot template prior to conversion to SiC can be a more important contributor to size dispersion, and must be avoided through control of thermal budget.

cond-mat.mtrl-sci↗
arXiv2011

Quantum transport in oxide nanostructures

We describe magnetotransport experiments performed on Hall crosses made from quantum wires at LaAlO3/SrTiO3 interfaces. Shubnikov-de Haas oscillations measured in a 14-nm wide structure exhibit modulations that are consistent with spin-orbit coupling or valley degeneracies. Hall measurements performed on the 6 nm-wide Hall cross reveal dissipative coupling to magnetic phases. Hall plateaus are observed that deviate significantly from two-dimensional quantum Hall counterparts. Non-monotonic dips in the Hall resistance are attributed to one-dimensional confinement and spin-orbit coupling.

cond-mat.mes-hall↗
arXiv2011

Cooper Pair Writing at the LaAlO3/SrTiO3 Interface

The LaAlO3/SrTiO3 interface provides a unique platform for controlling the electronic properties of the superconducting semiconductor SrTiO3. Prior investigations have shown that two-dimensional superconductivity can be produced at the LaAlO3/SrTiO3 interface and tuned electrostatically. The recently demonstrated reversible control of the metal-insulator transition at the same interface using conductive atomic force microscopy (c-AFM) raises the question of whether this room-temperature technique can produce structures that exhibit superconducting, normal metallic and insulating phases at sub-Kelvin temperatures. Here we report low-temperature magnetotransport experiments on conducting structures defined at an otherwise insulating LaAlO3/SrTiO3 interface. A quantum phase transition associated with the formation of Cooper pairs is observed in these predefined structures at sub-Kelvin temperatures. However, a finite resistance remains even at the lowest temperature. At higher magnetic fields, interfaces with high mobility also exhibit strong Shubnikov-de Haas oscillations as well as a larger Ginsburg-Landau coherence length. Cooper pair localization, spin-orbit coupling, and finite-size effects may factor into an explanation for some of the unusual properties observed.

cond-mat.mes-hall↗
arXiv2010

Coherent soft-mode phonon generation and detection in ultrathin SrTiO3 grown directly on silicon

Time-resolved two color pump-probe polarization spectroscopy was performed at room temperature on SrTiO3 films grown directly on Si with film thickness varying from 2 nm to 7.8 nm. The E soft mode with a characteristic frequency of 0.2 THz is impulsively generated and measured in these coherently strained tetragonal phase SrTiO3 thin films. Another over-damped signal observed indicates the possible relaxational hopping of Ti ion between double potential wells. The dependence of the coherent phonon signal on pump and probe laser polarization helps to identify the phonon modes.

cond-mat.mtrl-sci↗
arXiv2010

"Water-cycle" mechanism for writing and erasing nanostructures at the LaAlO3/SrTiO3 interface

Nanoscale control of the metal-insulator transition in LaAlO3/ SrTiO3 heterostructures can be achieved using local voltages applied by a conductive atomic-force microscope probe. One proposed mechanism for the writing and erasing process involves an adsorbed H2O layer at the top LaAlO3 surface. In this picture, water molecules dissociates into OH- and H+ which are then selectively removed by a biased AFM probe. To test this mechanism, writing and erasing experiments are performed in a vacuum AFM using various gas mixtures. Writing ability is suppressed in those environments where H2O is not present. The stability of written nanostructures is found to be strongly associated with the ambient environment. The self-erasure process in air can be strongly suppressed by creating a modest vacuum or replacing the humid air with dry inert gas. These experiments provide strong constraints for theories of both the writing process as well as the origin of interfacial conductance.

cond-mat.mes-hall↗