arXiv Science⌕ Search

arXiv subjects

J. Koch

Publications and source records attributed to J. Koch.

6 recordsLinked to original sources

The 3He(α,γ)7Be γ-ray angular distribution: measured, and calculated by effective field theory

The 3He(alpha,gamma)7Be reaction takes place in several distinct astrophysical scenarios. First, in solar hydrogen burning, 3He(alpha,gamma)7Be controls the competition between the pp-I chain, on the one hand, and the pp-II and -III chains, on the other hand. Its rate directly affects the solar model predictions for the well-measured 7Be and 8B solar neutrino fluxes, which can in principle be used as solar thermometer. Second, in Big Bang nucleosynthesis, 3He(alpha,gamma)7Be is the main production channel for primordial 7Li, the decay product of 7Be. Finally, the reaction is believed to produce radioactive 7Be in astrophysical novae. The cross section of this reaction has been studied previously using different methods, namely 7Be activation, 7Be recoil detection, and in-beam γ-ray detection. The latter studies have in many cases been performed with just one detector in close geometry. Here, for the first time a comprehensive measurement of the 3He(α,γ)7Be γ-ray angular distribution is reported. Altogether 22 high-purity germanium detectors were used, arranged at 27-145 degrees angle with respect to the beam direction. Data were taken at 442-1213 keV center-of-mass energy. In addition, one data point for the astrophysical S-factor was obtained with the activation method. The angular data are compared with the predictions from a hybrid theoretical approach, where the E1 transitions are modeled using a cluster-based effective field theory (EFT) while the M1 and E2 transitions within an EFT-inspired framework. Good agreement is found, if the interference among these multipolarities is taken into account in the theory.

nucl-ex↗

Demonstration of high-impedance superconducting NbRe Dayem bridges

Here we demonstrate superconducting Dayem-bridge weak-links made of different stoichiometric compositions of NbRe. Our devices possess a relatively high critical temperature, normal-state resistance, and kinetic inductance. In particular, the high kinetic inductance makes this material a good alternative to more conventional niobium-based superconductors (e.g., NbN or NbTiN) for the realization of superinductors and high-quality factor resonators, whereas the high normal-state resistance yields a large output voltage in superconducting switches and logic elements realized upon this compound. Moreover, out-of-plane critical magnetic fields exceeding 2 T ensure that possible applications requiring high magnetic fields can also be envisaged. Altogether, these features make this material appealing for a number of applications in the framework of quantum technologies.

cond-mat.supr-con↗

A new ultra low-level HPGe activity counting setup in the Felsenkeller shallow-underground laboratory

A new ultra low-level counting setup has been installed in the shallow-underground laboratory Felsenkeller in Dresden, Germany. It includes a high-purity germanium detector (HPGe) of 163\% relative efficiency within passive and active shields. The passive shield consists of 45m rock overburden (140 meters water equivalent), 40 cm of low-activity concrete, and a lead and copper castle enclosed by an anti-radon box. The passive shielding alone is found to reduce the background rate to rates comparable to other shallow-underground laboratories. An additional active veto is given by five large plastic scintillation panels surrounding the setup. It further reduces the background rate by more than one order of magnitude down to 116$\pm$1 kg$^{-1}$ d$^{-1}$ in an energy interval of 40-2700 keV. This low background rate is unprecedented for shallow-underground laboratories and close to deep underground laboratories.

physics.ins-det↗

Modeling and Experiment of the Suspended Seismometer Concept for Attenuating the Contribution of Tilt Motion in Horizontal Measurements

Tilt-horizontal coupling in inertial sensors limits the performance of active isolation systems such as those used in gravitational wave detectors. Inertial rotation sensors can be used to subtract the tilt component from the signal produced by horizontal inertial sensors, but such techniques are often limited by the sensor noise of the tilt measurement. A different approach is to mechanically filter the tilt transmitted to the horizontal inertial sensor, as discussed in this article. This technique does not require an auxiliary rotation sensor, and can produce a lower noise measurement. The concept investigated uses a mechanical suspension to isolate the inertial sensor from input tilt. Modeling and simulations show that such a configuration can be used to adequately attenuate the tilt transmitted to the instrument, while maintaining translation sensitivity in the frequency band of interest. The analysis is supported by experimental results showing that this approach is a viable solution to overcome the tilt problem in the field of active inertial isolation.

physics.ins-det↗

Pion structure from improved lattice QCD: form factor and charge radius at low masses

The charge form factor of the pion is calculated in lattice QCD. The non-perturbatively improved Sheikholeslami-Wohlert action is used together with the $\mathcal{O}(a)$ improved vector current. Other choices for the current are examined. The form factor is extracted for pion masses from 970 MeV down to 360 MeV and for momentum transfers $Q^2 \leq 2 \mathrm{GeV}^2$. The mean square charge radius is extracted, compared to previous determinations and its extrapolation to lower masses discussed.

hep-lat↗