arXiv Science⌕ Search

arXiv subjects

Hui Zhou

Publications and source records attributed to Hui Zhou.

At least 91 records · Page 5Linked to original sources
arXiv2020

Cylindrical and Asymmetrical 3D Convolution Networks for LiDAR Segmentation

State-of-the-art methods for large-scale driving-scene LiDAR segmentation often project the point clouds to 2D space and then process them via 2D convolution. Although this corporation shows the competitiveness in the point cloud, it inevitably alters and abandons the 3D topology and geometric relations. A natural remedy is to utilize the3D voxelization and 3D convolution network. However, we found that in the outdoor point cloud, the improvement obtained in this way is quite limited. An important reason is the property of the outdoor point cloud, namely sparsity and varying density. Motivated by this investigation, we propose a new framework for the outdoor LiDAR segmentation, where cylindrical partition and asymmetrical 3D convolution networks are designed to explore the 3D geometric pat-tern while maintaining these inherent properties. Moreover, a point-wise refinement module is introduced to alleviate the interference of lossy voxel-based label encoding. We evaluate the proposed model on two large-scale datasets, i.e., SemanticKITTI and nuScenes. Our method achieves the 1st place in the leaderboard of SemanticKITTI and outperforms existing methods on nuScenes with a noticeable margin, about 4%. Furthermore, the proposed 3D framework also generalizes well to LiDAR panoptic segmentation and LiDAR 3D detection.

cs.CV↗
arXiv2020

A Vision of XR-aided Teleoperation System Towards 5G/B5G

Extended Reality (XR)-aided teleoperation has shown its potential in improving operating efficiency in mission-critical, rich-information and complex scenarios. The multi-sensory XR devices introduce several new types of traffic with unique quality-of-service (QoS) requirements, which are usually defined by three measures---human perception, corresponding sensors, and present devices. To fulfil these requirements, cellular-supported wireless connectivity can be a promising solution that can largely benefit the Robot-to-XR and the XR-to-Robot links. In this article, we present industrial and piloting use cases and identify the service bottleneck of each case. We then cover the QoS of Robot-XR and XR-Robot links by summarizing the sensors' parameters and processing procedures. To realise these use cases, we introduce potential solutions for each case with cellular connections. Finally, we build testbeds to investigate the effectiveness of supporting our proposed links using current wireless topologies.

eess.SP↗
arXiv2020

Experimental observation of Dirac cones in artificial graphene lattices

Artificial lattices provide a tunable platform to realize exotic quantum devices. A well-known example is artificial graphene (AG), in which electrons are confined in honeycomb lattices and behave as massless Dirac fermions. Recently, AG systems have been constructed by manipulating molecules using scanning tunnelling microscope tips, but the nanoscale size typical for these constructed systems are impossible for practical device applications and insufficient for direct investigation of the electronic structures using angle-resolved photoemission spectroscopy (ARPES). Here, we demonstrate the synthesis of macroscopic AG by self-assembly of C$_{60}$ molecules on metal surfaces. Our theoretical calculations and ARPES measurements directly confirm the existence of Dirac cones at the $K$ ($K^\prime$) points of the Brillouin zone (BZ), in analogy to natural graphene. These results will stimulate ongoing efforts to explore the exotic properties in artificial lattices and provide an important step forward in the realization of novel molecular quantum devices.

cond-mat.mtrl-sci↗
arXiv2020

Cylinder3D: An Effective 3D Framework for Driving-scene LiDAR Semantic Segmentation

State-of-the-art methods for large-scale driving-scene LiDAR semantic segmentation often project and process the point clouds in the 2D space. The projection methods includes spherical projection, bird-eye view projection, etc. Although this process makes the point cloud suitable for the 2D CNN-based networks, it inevitably alters and abandons the 3D topology and geometric relations. A straightforward solution to tackle the issue of 3D-to-2D projection is to keep the 3D representation and process the points in the 3D space. In this work, we first perform an in-depth analysis for different representations and backbones in 2D and 3D spaces, and reveal the effectiveness of 3D representations and networks on LiDAR segmentation. Then, we develop a 3D cylinder partition and a 3D cylinder convolution based framework, termed as Cylinder3D, which exploits the 3D topology relations and structures of driving-scene point clouds. Moreover, a dimension-decomposition based context modeling module is introduced to explore the high-rank context information in point clouds in a progressive manner. We evaluate the proposed model on a large-scale driving-scene dataset, i.e. SematicKITTI. Our method achieves state-of-the-art performance and outperforms existing methods by 6% in terms of mIoU.

cs.CV↗
arXiv2020

Skinning a Parameterization of Three-Dimensional Space for Neural Network Cloth

We present a novel learning framework for cloth deformation by embedding virtual cloth into a tetrahedral mesh that parametrizes the volumetric region of air surrounding the underlying body. In order to maintain this volumetric parameterization during character animation, the tetrahedral mesh is constrained to follow the body surface as it deforms. We embed the cloth mesh vertices into this parameterization of three-dimensional space in order to automatically capture much of the nonlinear deformation due to both joint rotations and collisions. We then train a convolutional neural network to recover ground truth deformation by learning cloth embedding offsets for each skeletal pose. Our experiments show significant improvement over learning cloth offsets from body surface parameterizations, both quantitatively and visually, with prior state of the art having a mean error five standard deviations higher than ours. Moreover, our results demonstrate the efficacy of a general learning paradigm where high-frequency details can be embedded into low-frequency parameterizations.

cs.CV↗
arXiv2020

Epitaxial Growth and Band Structure of Antiferromagnetic Mott Insulator CeOI

The van der Waals material CeOI is predicted to be a layered antiferromagnetic Mott insulator by DFT+U calculation. We successfully grow the CeOI films down to monolayer on graphene/6H-SiC(0001) substrate by using molecular beam epitaxy. Films are studied by {\it in-situ} scanning tunneling microscopy and spectroscopy, which shows a band gap of 4.4 eV. A metallic phase with composition unidentified also exists. This rare earth oxyhalide adds a new member to the two-dimensional magnetic materials.

cond-mat.mtrl-sci↗
arXiv2020

Imitation Learning for Fashion Style Based on Hierarchical Multimodal Representation

Fashion is a complex social phenomenon. People follow fashion styles from demonstrations by experts or fashion icons. However, for machine agent, learning to imitate fashion experts from demonstrations can be challenging, especially for complex styles in environments with high-dimensional, multimodal observations. Most existing research regarding fashion outfit composition utilizes supervised learning methods to mimic the behaviors of style icons. These methods suffer from distribution shift: because the agent greedily imitates some given outfit demonstrations, it can drift away from one style to another styles given subtle differences. In this work, we propose an adversarial inverse reinforcement learning formulation to recover reward functions based on hierarchical multimodal representation (HM-AIRL) during the imitation process. The hierarchical joint representation can more comprehensively model the expert composited outfit demonstrations to recover the reward function. We demonstrate that the proposed HM-AIRL model is able to recover reward functions that are robust to changes in multimodal observations, enabling us to learn policies under significant variation between different styles.

cs.LG↗
arXiv2020

SegVoxelNet: Exploring Semantic Context and Depth-aware Features for 3D Vehicle Detection from Point Cloud

3D vehicle detection based on point cloud is a challenging task in real-world applications such as autonomous driving. Despite significant progress has been made, we observe two aspects to be further improved. First, the semantic context information in LiDAR is seldom explored in previous works, which may help identify ambiguous vehicles. Second, the distribution of point cloud on vehicles varies continuously with increasing depths, which may not be well modeled by a single model. In this work, we propose a unified model SegVoxelNet to address the above two problems. A semantic context encoder is proposed to leverage the free-of-charge semantic segmentation masks in the bird's eye view. Suspicious regions could be highlighted while noisy regions are suppressed by this module. To better deal with vehicles at different depths, a novel depth-aware head is designed to explicitly model the distribution differences and each part of the depth-aware head is made to focus on its own target detection range. Extensive experiments on the KITTI dataset show that the proposed method outperforms the state-of-the-art alternatives in both accuracy and efficiency with point cloud as input only.

cs.CV↗
arXiv2020

Recovering Geometric Information with Learned Texture Perturbations

Regularization is used to avoid overfitting when training a neural network; unfortunately, this reduces the attainable level of detail hindering the ability to capture high-frequency information present in the training data. Even though various approaches may be used to re-introduce high-frequency detail, it typically does not match the training data and is often not time coherent. In the case of network inferred cloth, these sentiments manifest themselves via either a lack of detailed wrinkles or unnaturally appearing and/or time incoherent surrogate wrinkles. Thus, we propose a general strategy whereby high-frequency information is procedurally embedded into low-frequency data so that when the latter is smeared out by the network the former still retains its high-frequency detail. We illustrate this approach by learning texture coordinates which when smeared do not in turn smear out the high-frequency detail in the texture itself but merely smoothly distort it. Notably, we prescribe perturbed texture coordinates that are subsequently used to correct the over-smoothed appearance of inferred cloth, and correcting the appearance from multiple camera views naturally recovers lost geometric information.

cs.CV↗
arXiv2019

Pose Guided Fashion Image Synthesis Using Deep Generative Model

Generating a photorealistic image with intended human pose is a promising yet challenging research topic for many applications such as smart photo editing, movie making, virtual try-on, and fashion display. In this paper, we present a novel deep generative model to transfer an image of a person from a given pose to a new pose while keeping fashion item consistent. In order to formulate the framework, we employ one generator and two discriminators for image synthesis. The generator includes an image encoder, a pose encoder and a decoder. The two encoders provide good representation of visual and geometrical context which will be utilized by the decoder in order to generate a photorealistic image. Unlike existing pose-guided image generation models, we exploit two discriminators to guide the synthesis process where one discriminator differentiates between generated image and real images (training samples), and another discriminator verifies the consistency of appearance between a target pose and a generated image. We perform end-to-end training of the network to learn the parameters through back-propagation given ground-truth images. The proposed generative model is capable of synthesizing a photorealistic image of a person given a target pose. We have demonstrated our results by conducting rigorous experiments on two data sets, both quantitatively and qualitatively.

cs.CV↗
arXiv2019

Robust Multi-Modality Multi-Object Tracking

Multi-sensor perception is crucial to ensure the reliability and accuracy in autonomous driving system, while multi-object tracking (MOT) improves that by tracing sequential movement of dynamic objects. Most current approaches for multi-sensor multi-object tracking are either lack of reliability by tightly relying on a single input source (e.g., center camera), or not accurate enough by fusing the results from multiple sensors in post processing without fully exploiting the inherent information. In this study, we design a generic sensor-agnostic multi-modality MOT framework (mmMOT), where each modality (i.e., sensors) is capable of performing its role independently to preserve reliability, and further improving its accuracy through a novel multi-modality fusion module. Our mmMOT can be trained in an end-to-end manner, enables joint optimization for the base feature extractor of each modality and an adjacency estimator for cross modality. Our mmMOT also makes the first attempt to encode deep representation of point cloud in data association process in MOT. We conduct extensive experiments to evaluate the effectiveness of the proposed framework on the challenging KITTI benchmark and report state-of-the-art performance. Code and models are available at https://github.com/ZwwWayne/mmMOT.

cs.CV↗
arXiv2019

3D Virtual Garment Modeling from RGB Images

We present a novel approach that constructs 3D virtual garment models from photos. Unlike previous methods that require photos of a garment on a human model or a mannequin, our approach can work with various states of the garment: on a model, on a mannequin, or on a flat surface. To construct a complete 3D virtual model, our approach only requires two images as input, one front view and one back view. We first apply a multi-task learning network called JFNet that jointly predicts fashion landmarks and parses a garment image into semantic parts. The predicted landmarks are used for estimating sizing information of the garment. Then, a template garment mesh is deformed based on the sizing information to generate the final 3D model. The semantic parts are utilized for extracting color textures from input images. The results of our approach can be used in various Virtual Reality and Mixed Reality applications.

cs.CV↗
arXiv2019

An electrically tunable terahertz plasmonic device based on shape memory alloys and liquid metals

An electrically tunable terahertz (THz) plasmonic device is designed and fabricated using liquid metals (eutectic gallium indium EGaIn) and shape memory alloy wires (Flexinol). The liquid metal is injected into the voids of a poly(dimethyl) siloxane (PDMS) microfluidic mold forming a periodic array of subwavelength apertures, while the wires are inserted into the elastomer below the metal plane. When a DC voltage is applied to the wires, they contract via Joule heating, reducing the aperture periodicity and blue-shifting the transmission resonances of the device. When the voltage is removed, the wires cool and elongate back to their original length, allowing the transmission spectrum to return to its original state. The magnitude of this change depends upon the applied voltage. The device is shown to thermally cycle between the relaxed state and the fully contracted state reproducibly over at least 500 thermal cycles. The asymmetric geometry of the device and the contraction process yield transmission properties that are unexpected: two closely spaced resonances, where both resonances correspond to the same scattering indices, and an increase in the transmission amplitude of the lowest order resonance upon contraction. We use numerical simulations to understand these features.

physics.app-ph↗
arXiv2019

Ranking-Based Autoencoder for Extreme Multi-label Classification

Extreme Multi-label classification (XML) is an important yet challenging machine learning task, that assigns to each instance its most relevant candidate labels from an extremely large label collection, where the numbers of labels, features and instances could be thousands or millions. XML is more and more on demand in the Internet industries, accompanied with the increasing business scale / scope and data accumulation. The extremely large label collections yield challenges such as computational complexity, inter-label dependency and noisy labeling. Many methods have been proposed to tackle these challenges, based on different mathematical formulations. In this paper, we propose a deep learning XML method, with a word-vector-based self-attention, followed by a ranking-based AutoEncoder architecture. The proposed method has three major advantages: 1) the autoencoder simultaneously considers the inter-label dependencies and the feature-label dependencies, by projecting labels and features onto a common embedding space; 2) the ranking loss not only improves the training efficiency and accuracy but also can be extended to handle noisy labeled data; 3) the efficient attention mechanism improves feature representation by highlighting feature importance. Experimental results on benchmark datasets show the proposed method is competitive to state-of-the-art methods.

cs.LG↗
arXiv2019

Penalizing Top Performers: Conservative Loss for Semantic Segmentation Adaptation

Due to the expensive and time-consuming annotations (e.g., segmentation) for real-world images, recent works in computer vision resort to synthetic data. However, the performance on the real image often drops significantly because of the domain shift between the synthetic data and the real images. In this setting, domain adaptation brings an appealing option. The effective approaches of domain adaptation shape the representations that (1) are discriminative for the main task and (2) have good generalization capability for domain shift. To this end, we propose a novel loss function, i.e., Conservative Loss, which penalizes the extreme good and bad cases while encouraging the moderate examples. More specifically, it enables the network to learn features that are discriminative by gradient descent and are invariant to the change of domains via gradient ascend method. Extensive experiments on synthetic to real segmentation adaptation show our proposed method achieves state of the art results. Ablation studies give more insights into properties of the Conservative Loss. Exploratory experiments and discussion demonstrate that our Conservative Loss has good flexibility rather than restricting an exact form.

cs.CV↗
arXiv2018

On $s$-distance-transitive graphs

Distance-regular graphs have many beautiful combinatorial properties. Distance-transitive graphs have very strong symmetries, and they are distance-regular, i.e. distance-transitivity implies distance-regularity. In this paper, we give similar results, i.e. for special $s$ and graphs with other restrictions we show that $s$-distance-transitivity implies distance-regularity.

math.CO↗