arXiv subjects

Haiyang Zhang

Publications and source records attributed to Haiyang Zhang.

79 records · Page 5Linked to original sources

arXiv2020

Realization of ppm level pressure stability for primary thermometry using a primary piston gauge

To achieve an uncertainty of 0.25 mK in single-pressure refractive-index gas thermometry (SPRIGT), the relative pressure variation of He-4 gas in the range 30 kPa to 90 kPa, should not exceed 4 ppm (k=1). To this end, a novel pressure control system has been developed. It consists of two main parts: a piston gauge to control the pressure, and a home-made gas compensation system to supplement the micro-leak of the piston gauge. In addition, to maintain the piston at constant height, a servo loop is used that automatically determines in real time the amount of extra gas required. At room temperature, the standard deviations of the stabilized pressure are 3.0 mPa at 30 kPa, 4.5 mPa at 60 kPa and 2 mPa at 90 kPa. For the temperature region 5 K-25 K used for SPRIGT in the present work, the relative pressure stability is better than 0.16 ppm i.e. 25 times better than required. Moreover, the same pressure stabilization system is readily transposable to other primary gas thermometers.

physics.ins-det↗

arXiv2020

Active suppression of temperature oscillation from a pulse-tube cryocooler in a cryogen-free cryostat: Part 2. Experimental realization

A cryogen-free cryostat cooled by a closed cycle cryocooler is compact, can provide uninterrupted long-term operation (up to ten thousand hours) and is suited to temperatures from 3 K to 300 K. Its intrinsic temperature oscillation, however, limits its application in experiments requiring high thermal stability at low temperature (below 77 K). Passive suppression methods are effective but all suffer from drawbacks. We describe a novel, active suppression scheme more efficient than traditional proportional-integral (PI) control. The experimental results show that it can reduce the standard deviation of the temperature oscillation by a further 30% compared with PI feedback. To the best of our knowledge, this is the first time such active suppression of temperature oscillations has been implemented with the cryogen-free cryostat. The results also show, however, that an unwanted lower frequency thermal noise will be generated, which appears to be the limit of the method. Nevertheless, the approach could be used to improve the temperature stability in all cryogen-free cryostats.

physics.ins-det↗

arXiv2020

Active suppression of temperature oscillation from a pulse-tube cryocooler in a cryogen-free cryostat: Part 1. Simulation modeling from thermal response characteristics

A cryogen-free cryostat cooled using a 4 K commercial GM or pulse tube cryocooler (PTC) displays temperature oscillations caused by the intrinsic working principle of the regenerative cryocooler. To dampen such oscillations usually requires either a large heat capacity or a large thermal resistance. To understand this phenomenon better and suppress it more effectively, both the step response characteristic and the intrinsic oscillation characteristic of cryostat have been used to obtain the complete transfer functions of a simulation model. The latter is used to test and optimize traditional PID feedback control. The results showed this approach has almost no effect on the temperature oscillation amplitude. Based on this simulation model, a novel active method was proposed and tested numerically. Simulation results predict the method should suppress the amplitude of the original temperature oscillation by a factor of two.

physics.ins-det↗

arXiv2020

Resonance frequency measurement with accuracy and stability at the 10-12 level in a copper microwave cavity below 26 K by experimental optimization

Single pressure refractive index gas thermometry (SPRIGT) is a novel primary thermometry, jointly developed by TIPC of CAS in China and LNE-Cnam in France. To realize a competitive uncertainty of 0.25 mK for thermodynamic temperature measurements, high-stability and low-uncertainty of microwave resonance frequency measurements better than 2 ppb should be achieved. This article describes how to realize high-stability and low-uncertainty of resonance frequency measurements in a copper microwave cavity by experimental optimization methods based on Allan analysis of variance. In this manner, 10-12 level accuracy and stability of microwave resonance frequency measurements were realized with an integration time of 3 hours, which is nearly 20 times better than those without optimization in our previous work (Sci. Bull 2019; 64: 286-288). It has potential applications in gas metrology and other research fields, where high-stability and low-uncertainty microwave measurements are necessary. Besides, microwave measurements were carried out isobarically at pressures of (30, 60, 90, and 120) kPa over the temperature range of (5 to 26) K, with good microwave mode consistency for the determined thermodynamic temperatures. These will provide strong support for the success of the implementation of SPRIGT in China.

physics.ins-det↗

arXiv2019

Jamming-assisted Proactive Eavesdropping over Two Suspicious Communication Links

This paper studies a new and challenging wireless surveillance problem where a legitimate monitor attempts to eavesdrop two suspicious communication links simultaneously. To facilitate concurrent eavesdropping, our multi-antenna legitimate monitor employs a proactive eavesdropping via jamming approach, by selectively jamming suspicious receivers to lower the transmission rates of the target links. In particular, we are interested in characterizing the achievable eavesdropping rate region for the minimum-mean-squared-error (MMSE) receiver case, by optimizing the legitimate monitor's jamming transmit covariance matrix subject to its power budget. As the monitor cannot hear more than what suspicious links transmit, the achievable eavesdropping rate region is essentially the intersection of the achievable rate region for the two suspicious links and that for the two eavesdropping links. The former region can be purposely altered by the monitor's jamming transmit covariance matrix, whereas the latter region is fixed when the MMSE receiver is employed. Therefore, we first analytically characterize the achievable rate region for the two suspicious links via optimizing the jamming transmit covariance matrix and then obtain the achievable eavesdropping rate region for the MMSE receiver case. Furthermore, we also extend our study to the MMSE with successive interference cancellation (MMSE-SIC) receiver case and characterize the corresponding achievable eavesdropping rate region by jointly optimizing the time-sharing factor between different decoding orders. Finally, numerical results are provided to corroborate our analysis and examine the eavesdropping performance.

eess.SP↗

arXiv2013

Resonance, Fermi surface topology, and Superconductivity in Cuprates

The resonance, a collective boson mode, was usually thought to be a possible glue of superconductivity. We argue that it is rather a natural product of the \emph{d}-wave pairing and the Fermi surface topology. A universal scaling $E_{res}/2Δ^{H}_{S}\sim 1.0$ ($Δ_{S}^{H}$ the magnitude of superconducting gap at hot spot) is proposed for cuprates, irrespective of the hole-/electron-doping, low-/high-energy resonance, monotonic/nonmonotonic \emph{d}-wave paring, and the parameters selected. We reveal that there may exist two resonance peaks in the electron-doped cuprates. The low- and high- energy resonance, originated from the contributions of the different intra-band component, is intimately associated with the Fermi surface topology. By analyzing the data of inelastic neutron scattering, we conclude the nonmonotonic \emph{d}-wave superconducting pairing symmetry in the electron-doped cuprates, which is still an open question

cond-mat.supr-con↗

arXiv2004

Nucleation and growth in one dimension, part I: The generalized Kolmogorov-Johnson-Mehl-Avrami model

Motivated by a recent application of the Kolmogorov-Johnson-Mehl-Avrami (KJMA) model to the study of DNA replication, we consider the one-dimensional version of this model. We generalize previous work to the case where the nucleation rate is an arbitrary function $I(t)$ and obtain analytical results for the time-dependent distributions of various quantities (such as the island distribution). We also present improved computer simulation algorithms to study the 1D KJMA model. The analytical results and simulations are in excellent agreement.

cond-mat.soft↗