arXiv subjects

Haiyang Zhang

Publications and source records attributed to Haiyang Zhang.

At least 73 records · Page 4Linked to original sources

arXiv2022

Near-Field Channel Estimation for Extremely Large-Scale Array Communications: A model-based deep learning approach

Extremely large-scale massive MIMO (XL-MIMO) has been reviewed as a promising technology for future wireless communications. The deployment of XL-MIMO, especially at high-frequency bands, leads to users being located in the near-field region instead of the conventional far-field. This letter proposes efficient model-based deep learning algorithms for estimating the near-field wireless channel of XL-MIMO communications. In particular, we first formulate the XL-MIMO near-field channel estimation task as a compressed sensing problem using the spatial gridding-based sparsifying dictionary, and then solve the resulting problem by applying the Learning Iterative Shrinkage and Thresholding Algorithm (LISTA). Due to the near-field characteristic, the spatial gridding-based sparsifying dictionary may result in low channel estimation accuracy and a heavy computational burden. To address this issue, we further propose a new sparsifying dictionary learning-LISTA (SDL-LISTA) algorithm that formulates the sparsifying dictionary as a neural network layer and embeds it into LISTA neural network. The numerical results show that our proposed algorithms outperform non-learning benchmark schemes, and SDL-LISTA achieves better performance than LISTA with ten times atoms reduction.

cs.IT↗

arXiv2022

Near-field Localization with Dynamic Metasurface Antennas

Sixth generation (6G) cellular communications are expected to support enhanced wireless localization capabilities. The widespread deployment of large arrays and high-frequency bandwidths give rise to new considerations for localization applications. First, emerging antenna architectures, such as dynamic metasurface antennas (DMAs), are expected to be frequently utilized thanks to the achievable high angular resolution and low hardware complexity. Further, wireless localization is likely to take place in the radiating near-field (Fresnel) region, which provides new degrees of freedom, because of the adoption of arrays with large apertures. While current studies mostly focus on the use of costly fully-digital antenna arrays, in this paper we investigate how DMAs can be applied for near-field localization of a single user. We use a direct positioning estimation method based on curvature-of-arrival of the impinging wavefront to obtain the user location, and characterize the effects of DMA tuning on the estimation accuracy. Next, we propose an algorithm for configuring the DMA to optimize near-field localization, by first tuning the adjustable DMA coefficients to minimize the estimation error using postulated knowledge of the actual user position. Finally, we propose a sub-optimal iterative algorithm that does not rely on such knowledge. Simulation results show that the DMA-based near-field localization accuracy could approach that of fully-digital arrays at lower cost.

eess.SP↗

arXiv2022

Beamforming Design for Integrated Sensing and Wireless Power Transfer Systems

This letter proposes a new concept of integrated sensing and wireless power transfer (ISWPT), where radar sensing and wireless power transfer functions are integrated into one hardware platform. ISWPT provides several benefits from the integrating operation such as system size, hardware cost, power consumption, and spectrum saving, which is envisioned to facilitate future 6G wireless networks. As the initial study, we aim to characterizing the fundamental trade-off between radar sensing and wireless power transfer, by optimizing transmit beamforming vectors. We first propose a semi-definite relaxation-based approach to solve the corresponding optimization problem globally optimal, and then provide a low-complexity sub-optimal solution. Finally, numerical results verify the effectiveness of our proposed solutions, and also show the trade-off between radar sensing and wireless power transfer.

eess.SP↗

arXiv2022

Joint Microstrip Selection and Beamforming Design for MmWave Systems with Dynamic Metasurface Antennas

Dynamic metasurface antennas (DMAs) provide a new paradigm to realize large-scale antenna arrays for future wireless systems. In this paper, we study the downlink millimeter wave (mmWave) DMA systems with limited number of radio frequency (RF) chains. By using a specific DMA structure, an equivalent mmWave channel model is first explicitly characterized. Based on that, we propose an effective joint microstrip selection and beamforming scheme to accommodate for the limited number of RF chains. A low-complexity digital beamforming solution with channel gain-based microstrip selection is developed, while the analog beamformer is obtained via a coordinate ascent method. The proposed scheme is numerically shown to approach the performance of DMAs without RF chain reduction, verifying the effectiveness of the proposed schemes.

eess.SP↗

arXiv2022

Channel Estimation with Hybrid Reconfigurable Intelligent Metasurfaces

Reconfigurable Intelligent Surfaces (RISs) are envisioned to play a key role in future wireless communications, enabling programmable radio propagation environments. They are usually considered as almost passive planar structures that operate as adjustable reflectors, giving rise to a multitude of implementation challenges, including the inherent difficulty in estimating the underlying wireless channels. In this paper, we focus on the recently conceived concept of Hybrid Reconfigurable Intelligent Surfaces (HRISs), which do not solely reflect the impinging waveform in a controllable fashion, but are also capable of sensing and processing an adjustable portion of it. We first present implementation details for this metasurface architecture and propose a convenient mathematical model for characterizing its dual operation. As an indicative application of HRISs in wireless communications, we formulate the individual channel estimation problem for the uplink of a multi-user HRIS-empowered communication system. Considering first a noise-free setting, we theoretically quantify the advantage of HRISs in notably reducing the amount of pilots needed for channel estimation, as compared to the case of purely reflective RISs. We then present closed-form expressions for the MSE performance in estimating the individual channels at the HRISs and the base station for the noisy model. Based on these derivations, we propose an automatic differentiation-based first-order optimization approach to efficiently determine the HRIS phase and power splitting configurations for minimizing the weighted sum-MSE performance. Our numerical evaluations demonstrate that HRISs do not only enable the estimation of the individual channels in HRIS-empowered communication systems, but also improve the ability to recover the cascaded channel, as compared to existing methods using passive and reflective RISs.

cs.IT↗

arXiv2022

Physics Embedded Machine Learning for Electromagnetic Data Imaging

Electromagnetic (EM) imaging is widely applied in sensing for security, biomedicine, geophysics, and various industries. It is an ill-posed inverse problem whose solution is usually computationally expensive. Machine learning (ML) techniques and especially deep learning (DL) show potential in fast and accurate imaging. However, the high performance of purely data-driven approaches relies on constructing a training set that is statistically consistent with practical scenarios, which is often not possible in EM imaging tasks. Consequently, generalizability becomes a major concern. On the other hand, physical principles underlie EM phenomena and provide baselines for current imaging techniques. To benefit from prior knowledge in big data and the theoretical constraint of physical laws, physics embedded ML methods for EM imaging have become the focus of a large body of recent work. This article surveys various schemes to incorporate physics in learning-based EM imaging. We first introduce background on EM imaging and basic formulations of the inverse problem. We then focus on three types of strategies combining physics and ML for linear and nonlinear imaging and discuss their advantages and limitations. Finally, we conclude with open challenges and possible ways forward in this fast-developing field. Our aim is to facilitate the study of intelligent EM imaging methods that will be efficient, interpretable and controllable.

physics.comp-ph↗

arXiv2022

BiTAT: Neural Network Binarization with Task-dependent Aggregated Transformation

Neural network quantization aims to transform high-precision weights and activations of a given neural network into low-precision weights/activations for reduced memory usage and computation, while preserving the performance of the original model. However, extreme quantization (1-bit weight/1-bit activations) of compactly-designed backbone architectures (e.g., MobileNets) often used for edge-device deployments results in severe performance degeneration. This paper proposes a novel Quantization-Aware Training (QAT) method that can effectively alleviate performance degeneration even with extreme quantization by focusing on the inter-weight dependencies, between the weights within each layer and across consecutive layers. To minimize the quantization impact of each weight on others, we perform an orthonormal transformation of the weights at each layer by training an input-dependent correlation matrix and importance vector, such that each weight is disentangled from the others. Then, we quantize the weights based on their importance to minimize the loss of the information from the original weights/activations. We further perform progressive layer-wise quantization from the bottom layer to the top, so that quantization at each layer reflects the quantized distributions of weights and activations at previous layers. We validate the effectiveness of our method on various benchmark datasets against strong neural quantization baselines, demonstrating that it alleviates the performance degeneration on ImageNet and successfully preserves the full-precision model performance on CIFAR-100 with compact backbone networks.

cs.CV↗

arXiv2022

Jointly Learned Symbol Detection and Signal Reflection in RIS-Aided Multi-user MIMO Systems

Reconfigurable Intelligent Surfaces (RISs) are regarded as a key technology for future wireless communications, enabling programmable radio propagation environments. However, the passive reflecting feature of RISs induces notable challenges on channel estimation, making coherent symbol detection a challenging task. In this paper, we consider the uplink of RIS-aided multi-user Multiple-Input Multiple-Output (MIMO) systems and propose a Machine Learning (ML) approach to jointly design the multi-antenna receiver and configure the RIS reflection coefficients, which does not require explicit full knowledge of the channel input-output relationship. Our approach devises a ML-based receiver, while the configurations of the RIS reflection patterns affecting the underlying propagation channel are treated as hyperparameters. Based on this system design formulation, we propose a Bayesian ML framework for optimizing the RIS hyperparameters, according to which the transmitted pilots are directly used to jointly tune the RIS and the multi-antenna receiver. Our simulation results demonstrate the capability of the proposed approach to provide reliable communications in non-linear channel conditions corrupted by Gaussian noise.

eess.SP↗

arXiv2022

Channel Estimation with Simultaneous Reflecting and Sensing Reconfigurable Intelligent Metasurfaces

eess.SP↗

arXiv2021

Task-Based Graph Signal Compression

Graph signals arise in various applications, ranging from sensor networks to social media data. The high-dimensional nature of these signals implies that they often need to be compressed in order to be stored and transmitted. The common framework for graph signal compression is based on sampling, resulting in a set of continuous-amplitude samples, which in turn have to be quantized into a finite bit representation. In this work we study the joint design of graph signal sampling along with quantization, for graph signal compression. We focus on bandlimited graph signals, and show that the compression problem can be represented as a task-based quantization setup, in which the task is to recover the spectrum of the signal. Based on this equivalence, we propose a joint design of the sampling and recovery mechanisms for a fixed quantization mapping, and present an iterative algorithm for dividing the available bit budget among the discretized samples. Furthermore, we show how the proposed approach can be realized using graph filters combining elements corresponding the neighbouring nodes of the graph, thus facilitating distributed implementation at reduced complexity. Our numerical evaluations on both synthetic and real world data shows that the joint sampling and quantization method yields a compact finite bit representation of high-dimensional graph signals, which allows reconstruction of the original signal with accuracy within a small gap of that achievable with infinite resolution quantizers.

eess.SP↗

arXiv2021

Near-Field Wireless Power Transfer with Dynamic Metasurface Antennas

Radio frequency wireless power transfer (WPT) enables charging low-power mobile devices without relying on wired infrastructure. Current existing WPT systems are typically designed assuming far-field propagation, where the radiated energy is steered in given angles, resulting in limited efficiency and possible radiation in undesired locations. When large arrays at high frequencies, such as DMA, are employed, WPT might take place in the radiating near-field (Fresnel) region where spherical wave propagation holds, rather than plane wave propagation as in the far-field. In this paper, we study WPT systems charging multiple devices in the Fresnel region, where the energy transmitter is equipped with an emerging DMA, exploring how the antenna configuration can exploit the spherical wavefront to generate focused energy beams. In particular, after presenting a mathematical model for DMA-based radiating near-field WPT systems, we characterize the weighted sum-harvested energy maximization problem of the considered system, and we propose an efficient solution to jointly design the DMA weights and digital precoding vector. Simulation results show that our design generates focused energy beams that are capable of improving energy transfer efficiency in the radiating near-field with minimal energy pollution.

eess.SP↗

arXiv2021

Near-field Wireless Power Transfer for 6G Internet-of-Everything Mobile Networks: Opportunities and Challenges

Radiating wireless power transfer (WPT) brings forth the possibility to cost-efficiently charge wireless devices without requiring a wiring infrastructure. As such, it is expected to play a key role in the deployment of limited-battery communicating devices, as part of the 6G enabled Internet-of-Everything (IoE) vision. To date, radiating WPT technologies are mainly studied and designed assuming that the devices are located in the far-field region of the power radiating antenna, resulting in a relatively low energy transfer efficiency. However, with the transition of 6G systems to mmWave frequencies combined with the usage of large-scale antennas, future WPT devices are likely to operate in the radiating near-field (Fresnel) region. In this article, we provide an overview of the opportunities and challenges which arise from radiating near-field WPT. In particular, we discuss about the possibility to realize beam focusing in near-field radiating conditions, and highlight its possible implications for WPT in future {IoE} networks. Besides, we overview some of the design challenges and research directions which arise from this emerging paradigm, including its simultaneous operation with wireless communications, radiating waveform considerations, hardware aspects, and operation with typical antenna architectures.

eess.SP↗

arXiv2021

Learning to Sample: Data-Driven Sampling and Reconstruction of FRI Signals

Finite-rate-of-innovation (FRI) signals are ubiquitous in applications such as radar, ultrasound, and time of flight imaging. Due to their finite degrees of freedom, FRI signals can be sampled at sub-Nyquist rates using appropriate sampling kernels and reconstructed using sparse-recovery algorithms. Typically, Fourier samples of the FRI signals are used for reconstruction. The reconstruction quality depends on the choice of Fourier samples and recovery method. In this paper, we consider to jointly optimize the choice of Fourier samples and reconstruction parameters. Our framework is a combination of a greedy subsampling algorithm and a learning-based sparse recovery method. Unlike existing techniques, the proposed algorithm can flexibly handle changes in the sampling rate and does not suffer from differentiability issues during training. Importantly, exact knowledge of the FRI pulse is not required. Numerical results show that, for a given number of samples, the proposed joint design leads to lower reconstruction error for FRI signals compared to independent data-driven design methods for both noisy and clean samples. Our learning to sample approach can be readily applied to other sampling setups as well including compressed sensing problems.

eess.SP↗

arXiv2021

Beam Focusing for Near-Field Multi-User MIMO Communications

Large antenna arrays and high-frequency bands are two key features of future wireless communication systems. The combination of large-scale antennas with high transmission frequencies often results in the communicating devices operating in the near-field (Fresnel) region. In this paper, we study the potential of beam focusing, feasible in near-field operation, in facilitating high-rate multi-user downlink multiple-input multiple-output (MIMO) systems. As the ability to achieve beam focusing is dictated by the transmit antenna, we study near-field signaling considering different antenna structures, including fully-digital architectures, hybrid phase shifter-based precoders, and the emerging dynamic metasurface antenna (DMA) architecture for massive MIMO arrays. We first provide a mathematical model to characterize near-field wireless channels as well as the transmission pattern for the considered antenna architectures. Then, we formulate the beam focusing problem for the goal of maximizing the achievable sum-rate in multi-user networks. We propose efficient solutions based on the sum-rate maximization task for fully-digital, (phase shifters based-) hybrid and DMA architectures. Simulation results show the feasibility of the proposed beam focusing scheme for both single- and multi-user scenarios. In particular, the designed focused beams are such that users residing at the same angular direction can communicate reliably without interfering with each other, which is not achievable using conventional far-field beam steering.

eess.SP↗

arXiv2021

UserReg: A Simple but Strong Model for Rating Prediction

Collaborative filtering (CF) has achieved great success in the field of recommender systems. In recent years, many novel CF models, particularly those based on deep learning or graph techniques, have been proposed for a variety of recommendation tasks, such as rating prediction and item ranking. These newly published models usually demonstrate their performance in comparison to baselines or existing models in terms of accuracy improvements. However, others have pointed out that many newly proposed models are not as strong as expected and are outperformed by very simple baselines. This paper proposes a simple linear model based on Matrix Factorization (MF), called UserReg, which regularizes users' latent representations with explicit feedback information for rating prediction. We compare the effectiveness of UserReg with three linear CF models that are widely-used as baselines, and with a set of recently proposed complex models that are based on deep learning or graph techniques. Experimental results show that UserReg achieves overall better performance than the fine-tuned baselines considered and is highly competitive when compared with other recently proposed models. We conclude that UserReg can be used as a strong baseline for future CF research.

cs.IR↗

arXiv2020

Robustness and Reliability of Gender Bias Assessment in Word Embeddings: The Role of Base Pairs

It has been shown that word embeddings can exhibit gender bias, and various methods have been proposed to quantify this. However, the extent to which the methods are capturing social stereotypes inherited from the data has been debated. Bias is a complex concept and there exist multiple ways to define it. Previous work has leveraged gender word pairs to measure bias and extract biased analogies. We show that the reliance on these gendered pairs has strong limitations: bias measures based off of them are not robust and cannot identify common types of real-world bias, whilst analogies utilising them are unsuitable indicators of bias. In particular, the well-known analogy "man is to computer-programmer as woman is to homemaker" is due to word similarity rather than societal bias. This has important implications for work on measuring bias in embeddings and related work debiasing embeddings.

cs.CL↗

arXiv2020

On Data Augmentation for Extreme Multi-label Classification

In this paper, we focus on data augmentation for the extreme multi-label classification (XMC) problem. One of the most challenging issues of XMC is the long tail label distribution where even strong models suffer from insufficient supervision. To mitigate such label bias, we propose a simple and effective augmentation framework and a new state-of-the-art classifier. Our augmentation framework takes advantage of the pre-trained GPT-2 model to generate label-invariant perturbations of the input texts to augment the existing training data. As a result, it present substantial improvements over baseline models. Our contributions are two-factored: (1) we introduce a new state-of-the-art classifier that uses label attention with RoBERTa and combine it with our augmentation framework for further improvement; (2) we present a broad study on how effective are different augmentation methods in the XMC task.

cs.CL↗

arXiv2020

Prediction and realization of a temperature control limit at low temperatures in SPRIGT

On May 20th 2019, the World Metrology Day, the Bureau International des Poids et Mesures announced a major revision to the four more SI units. The base unit, the kelvin, is defined by fixing the value of Boltzmann constant as indicated in Mise en pratique for the definition of the kelvin in the SI. To realize the new kelvin, a novel practical realization technique of single-pressure refractive-index gas thermometry (SPRIGT) has been jointly developed by the TIPC-CAS in China and the LNE-Cnam in France. To carry out accurate SPRIGT, experimental methods have been implemented and micro-kelvin level temperature control limits have been predicted and achieved at 5 K to 26 K. The resonator temperature stability can be maintained to within better than 8 μK of its set point with an integration time 33.6 s over 180 h. Besides, solutions for further improving the stability were also demonstrated, which can be a reference for temperature metrology field worldwide and other fields where high-stability temperature is required. The present work should also provide a solid foundation for international data comparison of thermodynamic temperature at low temperatures, and will promote realizations of the new kelvin and the spread of high-accuracy, low-temperature metrology.

physics.ins-det↗