arXiv ScienceSearch

arXiv subjects

G. Conti

Publications and source records attributed to G. Conti.

17 recordsLinked to original sources

Absence of strong magnetic fluctuations or interactions in the normal state of LaNiGa$_2$

We present nuclear magnetic (NMR) and qudrupole (NQR) resonance and magnetization data in the normal state of the topological crystalline superconductor LaNiGa$_2$. We find no evidence of magnetic fluctuations or enhanced paramagnetism. These results suggest that the time-reversal symmetry breaking previously reported in the superconducting state of this material is not driven by strong electron correlations.

cond-mat.supr-con

Optimizing fog harvesting by biomimicry

Inspired by the stenocara beetle, we study an ideal flat surface composed of a regular array of hydrophilic circular patches in a hydrophobic matrix on an incline of tilt $\alpha$ with respect to the horizontal. Based on an exact solution of the Laplace-Young equation at first order in the Bond number, the liquid storage capacity of the surface is maximized as function of the patch radius, for suitable ranges of hydrophilic and hydrophobic contact angles, for tilt angles such as $45^{\circ}$ or $90^\circ$. It is found that the optimal radius equally prevents dewetting from the top of the patches and overflow at the bottom. These theoretical considerations are validated by several experiments for the glass/octadecyltrichlorosilane (OTS) system involving different patch sizes and different inclinations. In a simple dynamical model, taking into account the flux of fog onto the surface or condensation on a suitably cooled surface, we find that the conditions for maximum harvest agree with the ones of maximum static storage. The method could be developed for drop storage and drop transport applications such as water-harvesting systems.

cond-mat.soft

Emergent phenomena at oxide interfaces studied with standing-wave photoelectron spectroscopy

Emergent phenomena at complex-oxide interfaces have become a vibrant field of study in the past two decades due to the rich physics and a wide range of possibilities for creating new states of matter and novel functionalities for potential devices. Electronic-structural characterization of such phenomena presents a unique challenge due to the lack of direct yet non-destructive techniques for probing buried layers and interfaces with the required Angstrom-level resolution, as well as element and orbital specificity. In this review article, we survey several recent studies wherein soft x-ray standing-wave photoelectron spectroscopy, a relatively newly developed technique, is used to investigate buried oxide interfaces exhibiting emergent phenomena such as metal-insulator transition, interfacial ferromagnetism, and two-dimensional electron gas. Advantages, challenges, and future applications of this methodology are also discussed.

cond-mat.mtrl-sci

Hard x-ray standing-wave photoemission study of the interfaces in a BiFeO$_3$/La$_{0.7}$Sr$_{0.3}$MnO$_3$ superlattice

Hybrid multiferroics such as BiFeO$_3$ (BFO) and La$_{0.7}$Sr$_{0.3}$MnO$_3$ (LSMO) heterostructures are highly interesting functional systems due to their complex electronic and magnetic properties. One of the key parameters influencing the emergent properties is the quality of interfaces, where varying interdiffusion lengths can give rise to different chemistry and distinctive electronic states. Here we report high-resolution depth resolved chemical and electronic investigation of BFO/LSMO superlattice using standing-wave hard X-ray photoemission spectroscopy in the first-order Bragg as well as near-total-reflection geometry. Our results show that the interfaces of BFO on top of LSMO are atomically abrupt, while the LSMO on top of BFO interfaces show an interdiffusion length of around 1.2 unit cells. The two interfaces also exhibit different chemical gradients, with the BFO/LSMO interface being Sr-terminated by a spectroscopically distinctive high binding energy component in Sr 2p core-level spectra, which is spatially contained within 1 unit cell from the interface. From the electronic point of view, unique valence band features were observed for bulk-BFO, bulk-LSMO and their interfaces. Our X-ray optical analysis revealed a unique electronic signature at the BFO/LSMO interface, which we attribute to the coupling between those respective layers. Valence band decomposition based on the Bragg-reflection standing-wave measurement also revealed the band alignment between BFO and LSMO layers. Our work demonstrates that standing-wave hard x-ray photoemission is a reliable non-destructive technique for probing depth-resolved electronic structure of buried layers and interfaces with sub-unit-cell resolution. Equivalent investigations can be successfully applied to a broad class of material such as perovskite complex oxides with emergent interfacial phenomena.

cond-mat.mtrl-sci

Bulk Electronic Structure of Lanthanum Hexaboride (LaB6) by Hard X-ray Angle-Resolved Photoelectron Spectroscopy

In the last decade rare-earth hexaborides have been investigated for their fundamental importance in condensed matter physics, and for their applications in advanced technological fields. Among these compounds, LaB$_6$ has a special place, being a traditional d-band metal without additional f- bands. In this paper we investigate the bulk electronic structure of LaB$_6$ using hard x-ray photoemission spectroscopy, measuring both core-level and angle-resolved valence-band spectra. By comparing La 3d core level spectra to cluster model calculations, we identify well-screened peak residing at a lower binding energy compared to the main poorly-screened peak; the relative intensity between these peaks depends on how strong the hybridization is between La and B atoms. We show that the recoil effect, negligible in the soft x-ray regime, becomes prominent at higher kinetic energies for lighter elements, such as boron, but is still negligible for heavy elements, such as lanthanum. In addition, we report the bulk-like band structure of LaB$_6$ determined by hard x-ray angle-resolved photoemission spectroscopy (HARPES). We interpret HARPES experimental results by the free-electron final-state calculations and by the more precise one-step photoemission theory including matrix element and phonon excitation effects. In addition, we consider the nature and the magnitude of phonon excitations in HARPES experimental data measured at different temperatures and excitation energies. We demonstrate that one step theory of photoemission and HARPES experiments provide, at present, the only approach capable of probing true bulk-like electronic band structure of rare-earth hexaborides and strongly correlated materials.

physics.app-ph

Hard x-ray standing-wave photoemission insights into the structure of an epitaxial Fe/MgO multilayer magnetic tunnel junction

The Fe/MgO magnetic tunnel junction is a classic spintronic system, with current importance technologically, and interest for future innovation. The key magnetic properties are linked directly to the structure of hard-to-access buried interfaces, and the Fe and MgO components near the surface are unstable when exposed to air, making a deeper probing, non-destructive, in-situ measurement ideal for this system. We have thus applied hard x-ray photoemission spectroscopy (HXPS) and standing-wave (SW) HXPS in the few keV energy range to probe the structure of an epitaxially-grown MgO/Fe superlattice. The superlattice consists of 9 repeats of MgO grown on Fe by magnetron sputtering on an MgO (001) substrate, with a protective Al2O3 capping layer. We determine through SW-HXPS that 8 of the 9 repeats are similar and ordered, with a period of 33 $\pm$ 4 angstrom, with minor presence of FeO at the interfaces and a significantly distorted top bilayer with ca. 3 times the oxidation of the lower layers at the top MgO/Fe interface. There is evidence of asymmetrical oxidation on the top and bottom of the Fe layers. We find agreement with dark-field scanning transmission electron microscope (STEM) and x-ray reflectivity measurements. Through the STEM measurements we confirm an overall epitaxial stack with dislocations and warping at the interfaces of ca. 5 angstrom. We also note a distinct difference in the top bilayer, especially MgO, with possible Fe inclusions. We thus demonstrate that SW-HXPS can be used to probe deep buried interfaces of novel magnetic devices with few angstrom precision.

cond-mat.mtrl-sci

Characterization of free standing InAs quantum membranes by standing wave hard x-ray photoemission spectroscopy

Free-standing nanoribbons of InAs quantum membranes (QMs) transferred onto a (Si/Mo) multilayer mirror substrate are characterized by hard x-ray photoemission spectroscopy (HXPS), and by standing-wave HXPS (SW-HXPS). Information on the chemical composition and on the chemical states of the elements within the nanoribbons was obtained by HXPS and on the quantitative depth profiles by SW-HXPS. By comparing the experimental SW-HXPS rocking curves to x-ray optical calculations, the chemical depth profile of the InAs(QM) and its interfaces were quantitatively derived with angstrom precision. We determined that: i) the exposure to air induced the formation of an InAsO$_4$ layer on top of the stoichiometric InAs(QM); ii) the top interface between the air-side InAsO$_4$ and the InAs(QM) is not sharp, indicating that interdiffusion occurs between these two layers; iii) the bottom interface between the InAs(QM) and the native oxide SiO$_2$ on top of the (Si/Mo) substrate is abrupt. In addition, the valence band offset (VBO) between the InAs(QM) and the SiO$_2$/(Si/Mo) substrate was determined by HXPS. The value of $VBO = 0.2 \pm 0.04$ eV is in good agreement with literature results obtained by electrical characterization, giving a clear indication of the formation of a well-defined and abrupt InAs/SiO$_2$ heterojunction. We have demonstrated that HXPS and SW-HXPS are non-destructive, powerful methods for characterizing interfaces and for providing chemical depth profiles of nanostructures, quantum membranes, and 2D layered materials.

cond-mat.mtrl-sci

Superconductor to Mott insulator transition in YBa$_2$Cu$_3$O$_7$/LaCaMnO$_3$ heterostructures

The superconductor-to-insulator transition (SIT) induced by means such as external magnetic fields, disorder or spatial confinement is a vivid illustration of a quantum phase transition dramatically affecting the superconducting order parameter. In pursuit of a new realization of the SIT by interfacial charge transfer, we developed extremely thin superlattices composed of high $T_c$ superconductor YBa$_2$Cu$_3$O$_7$ (YBCO) and colossal magnetoresistance ferromagnet La$_{0.67}$Ca$_{0.33}$MnO$_3$ (LCMO). By using linearly polarized resonant X-ray absorption spectroscopy and magnetic circular dichroism, combined with hard X-ray photoelectron spectroscopy, we derived a complete picture of the interfacial carrier doping in cuprate and manganite atomic layers, leading to the transition from superconducting to an unusual Mott insulating state emerging with the increase of LCMO layer thickness. In addition, contrary to the common perception that only transition metal ions may response to the charge transfer process, we found that charge is also actively compensated by rare-earth and alkaline-earth metal ions of the interface. Such deterministic control of $T_c$ by pure electronic doping without any hindering effects of chemical substitution is another promising route to disentangle the role of disorder on the pseudo-gap and charge density wave phases of underdoped cuprates.

cond-mat.supr-con

Depth-Resolved Composition and Electronic Structure of Buried Layers and Interfaces in a LaNiO$_3$/SrTiO$_3$ Superlattice from Soft- and Hard- X-ray Standing-Wave Angle-Resolved Photoemission

LaNiO$_3$ (LNO) is an intriguing member of the rare-earth nickelates in exhibiting a metal-insulator transition for a critical film thickness of about 4 unit cells [Son et al., Appl. Phys. Lett. 96, 062114 (2010)]; however, such thin films also show a transition to a metallic state in superlattices with SrTiO$_3$ (STO) [Son et al., Appl. Phys. Lett. 97, 202109 (2010)]. In order to better understand this transition, we have studied a strained LNO/STO superlattice with 10 repeats of [4 unit-cell LNO/3 unit-cell STO] grown on an (LaAlO$_3$)$_{0.3}$(Sr$_2$AlTaO$_6$)$_{0.7}$ substrate using soft x-ray standing-wave-excited angle-resolved photoemission (SWARPES), together with soft- and hard- x-ray photoemission measurements of core levels and densities-of-states valence spectra. The experimental results are compared with state-of-the-art density functional theory (DFT) calculations of band structures and densities of states. Using core-level rocking curves and x-ray optical modeling to assess the position of the standing wave, SWARPES measurements are carried out for various incidence angles and used to determine interface-specific changes in momentum-resolved electronic structure. We further show that the momentum-resolved behavior of the Ni 3d eg and t2g states near the Fermi level, as well as those at the bottom of the valence bands, is very similar to recently published SWARPES results for a related La$_{0.7}$Sr$_{0.3}$MnO$_3$/SrTiO$_3$ superlattice that was studied using the same technique (Gray et al., Europhysics Letters 104, 17004 (2013)), which further validates this experimental approach and our conclusions. Our conclusions are also supported in several ways by comparison to DFT calculations for the parent materials and the superlattice, including layer-resolved density-of-states results.

cond-mat.str-el

Observation by resonant angle-resolved photoemission of a critical thickness for 2-dimensional electron gas formation in SrTiO$_3$ embedded in GdTiO$_3$

For certain conditions of layer thickness, the interface between GdTiO$_3$ (GTO) and SrTiO$_3$ (STO) in multilayer samples has been found to form a two-dimensional electron gas (2DEG) with very interesting properties including high mobilities and ferromagnetism. We have here studied two trilayer samples of the form [2 nm GTO/1.0 or 1.5 unit cells STO/10 nm GTO] as grown on (001) (LaAlO$_3$)$_{0.3}$(Sr$_2$AlTaO$_6$)$_{0.7}$ (LSAT), with the STO layer thicknesses being at what has been suggested is the critical thickness for 2DEG formation. We have studied these with Ti-resonant angle-resolved (ARPES) and angle-integrated photoemission and find that the spectral feature in the spectra associated with the 2DEG is present in the 1.5 unit cell sample, but not in the 1.0 unit cell sample. We also observe through core-level spectra additional states in Ti and Sr, with the strength of a low-binding-energy state for Sr being associated with the appearance of the 2DEG, and we suggest it to have an origin in final-state core-hole screening.

cond-mat.mtrl-sci

Energetic, spatial and momentum character of a buried interface: the two-dimensional electron gas between two metal oxides

The interfaces between two condensed phases often exhibit emergent physical properties that can lead to new physics and novel device applications, and are the subject of intense study in many disciplines. We here apply novel experimental and theoretical techniques to the characterization of one such interesting interface system: the two-dimensional electron gas (2DEG) formed in multilayers consisting of SrTiO$_3$ (STO) and GdTiO$_3$ (GTO). This system has been the subject of multiple studies recently and shown to exhibit very high carrier charge densities and ferromagnetic effects, among other intriguing properties. We have studied a 2DEG-forming multilayer of the form [6 unit cells STO/3 unit cells of GTO]$_{20}$ using a unique array of photoemission techniques including soft and hard x-ray excitation, soft x-ray angle-resolved photoemission, core-level spectroscopy, resonant excitation, and standing-wave effects, as well as theoretical calculations of the electronic structure at several levels and of the actual photoemission process. Standing-wave measurements below and above a strong resonance have been introduced as a powerful method for studying the 2DEG depth distribution. We have thus characterized the spatial and momentum properties of this 2DEG with unprecedented detail, determining via depth-distribution measurements that it is spread throughout the 6 u.c. layer of STO, and measuring the momentum dispersion of its states. The experimental results are supported in several ways by theory, leading to a much more complete picture of the nature of this 2DEG, and suggesting that oxygen vacancies are not the origin of it. Similar multi-technique photoemission studies of such states at buried interfaces, combined with comparable theory, will be a very fruitful future approach for exploring and modifying the fascinating world of buried-interface physics and chemistry.

cond-mat.mtrl-sci

A facility to Search for Hidden Particles (SHiP) at the CERN SPS

A new general purpose fixed target facility is proposed at the CERN SPS accelerator which is aimed at exploring the domain of hidden particles and make measurements with tau neutrinos. Hidden particles are predicted by a large number of models beyond the Standard Model. The high intensity of the SPS 400~GeV beam allows probing a wide variety of models containing light long-lived exotic particles with masses below ${\cal O}$(10)~GeV/c$^2$, including very weakly interacting low-energy SUSY states. The experimental programme of the proposed facility is capable of being extended in the future, e.g. to include direct searches for Dark Matter and Lepton Flavour Violation.

physics.ins-det

Momentum-resolved electronic structure at a buried interface from soft x-ray standing-wave angle-resolved photoemission

Angle-resolved photoemission spectroscopy (ARPES) is a powerful technique for the study of electronic structure, but it lacks a direct ability to study buried interfaces between two materials. We address this limitation by combining ARPES with soft x-ray standing-wave (SW) excitation (SWARPES), in which the SW profile is scanned through the depth of the sample. We have studied the buried interface in a prototypical magnetic tunnel junction La0.7Sr0.3MnO3/SrTiO3. Depth- and momentum-resolved maps of Mn 3d eg and t2g states from the central, bulk-like and interface-like regions of La0.7Sr0.3MnO3 exhibit distinctly different behavior consistent with a change in the Mn bonding at the interface. We compare the experimental results to state-of-the-art density-functional and one-step photoemission theory, with encouraging agreement that suggests wide future applications of this technique.

cond-mat.mtrl-sci

Application of vertex and mass constraints in track-based alignment

The software alignment of planar tracking detectors using samples of charged particle trajectories may lead to global detector distortions that affect vertex and momentum resolution. We present an alignment procedure that constrains such distortions by making use of samples of decay vertices reconstructed from two or more trajectories and putting constraints on their invariant mass. We illustrate the method by using a sample of invariant-mass constrained vertices from D^0 --> K^- pi^+ decays to remove a curvature bias in the LHCb spectrometer.

physics.ins-det

Roadmap for selected key measurements of LHCb

Six of the key physics measurements that will be made by the LHCb experiment, concerning CP asymmetries and rare B decays, are discussed in detail. The "road map" towards the precision measurements is presented, including the use of control channels and other techniques to understand the performance of the detector with the first data from the LHC.

hep-ex

The VLT-VIRMOS Mask Manufacturing Unit

The VIRMOS Consortium has the task to design and manufacture two spectrographs for ESO VLT, VIMOS (Visible Multi-Object Spectrograph) and NIRMOS (Near Infrared Multi-Object Spectrograph). This paper describes how the Mask Manufacturing Unit (MMU), which cuts the slit masks to be used with both instruments, meets the scientific requirements and manages the storage and the insertion of the masks into the instrument. The components and the software of the two main parts of the MMU, the Mask Manufacturing Machine and the Mask Handling System, are illustrated together with the mask material and with the slit properties. Slit positioning is accurate within 15 micron, equivalent to 0.03 arcsec on the sky, while the slit edge roughness has an rms on the order of 0.03 pixels on scales of a slit 5 arcsec long and of 0.01 pixels on the pixel scale (0.205 arcsec). The MMU has been successfully installed during July/August 2000 at the Paranal Observatory and is now operational for spectroscopic mask cutting, compliant with the requested specifications.

astro-ph

The VIRMOS mask manufacturing tools: (b) Mask manufacturing and handling

We describe the VIRMOS Mask Manufacturing Unit (MMU) configuration, composed of two units:the Mask Manufacturing Machine (with its Control Unit) and the Mask Handling Unit (inclusive of Control Unit, Storage Cabinets and robot for loading of the Instrument Cabinets). For both VIMOS and NIRMOS instruments, on the basis of orders received by the Mask Preparation Software (see paper (a) in same proceedings), the function of the MMU is to perform an off-line mask cutting and identification, followed by mask storing and subsequent filling of the Instrument Cabinets (IC). We describe the characteristics of the LPKF laser cutting machine and the work done to support the choice of this equipment. We also describe the remaining of the hardware configuration and the Mask Handling Software.

astro-ph