arXiv Science⌕ Search

arXiv subjects

Fredrik Lundell

Publications and source records attributed to Fredrik Lundell.

At least 19 recordsLinked to original sources

Efficient Multi-Timescale Event Representations for Feed-Forward Object Detection

Autonomous systems require robust low-latency perception under rapidly changing scene dynamics and challenging illumination. In event cameras object detection commonly relies on recurrent architectures to accumulate sparse temporal information over time. This work investigates how temporal information can be encoded directly within the event representation. We propose a confidence-normalized continuous multi-timescale representation based on logarithmic B-spline temporal encoding together with a geometry-aware local confidence mechanism that exploits the spatial structure of event generation. Using a fixed feed-forward EventCenterNet detector, we show that the proposed representations consistently outperform the compact CSTR representation on PEDRo and Gen1 datasets. We further introduce a recursive exponential-polynomial approximation that enables efficient event-by-event updates while largely preserving detection performance. These results demonstrate that carefully designed event representations can capture a substantial portion of the temporal information learned through recurrent temporal modeling, providing a promising foundation for efficient feed-forward, event-driven, and future neuromorphic object detection.

cs.CV↗

Sub-Yield Dynamics in Yield-Stress Materials

The mechanical response of yield-stress materials below the yield point remains a subject of debate. Two of the most widely used constitutive models for these materials offer fundamentally conflicting views: one permits plastic flow at all stress levels, the other assumes entirely recoverable viscoelasticity below yield. Using parallel superposition rheometry, we test the sub-yield behaviour of a microgel and an emulsion. When residual slip effects are properly accounted for, both fluids exhibit bounded, periodic strain responses, offering compelling evidence that they do not flow in the studied regime. Our results indicate that the sub-yield regime is underpinned by nonlinear viscoelasticity and underscore the need for improved constitutive relations that capture such effects without treating yielding as a precursor for nonlinearity.

physics.flu-dyn↗

Synchrotron X-Ray Multi-Projection Imaging (XMPI) for High-Resolution 4D Characterization of Multiphase Flows

Multiphase flows where particles, bubbles, or droplets are suspended in a fluid govern critical processes in biology, medicine, materials processing, and geophysics. However, observing their microscale dynamics in opaque systems has remained a fundamental challenge. We present Synchrotron X-ray Multi-Projection Imaging (XMPI), a novel approach enabling four-dimensional (3D+time) tracking of microparticles in dense suspension flows without requiring sample rotation. By capturing simultaneous projections from multiple angles using beam-split X-rays at synchrotron facilities, we resolve instantaneous particle positions and trajectories in opaque fluids such as blood. We demonstrate the potential of XMPI through individual particle tracking velocimetry (3D PTV) in dilute conditions, as well as multi-projection optical flow analysis in dense suspensions. The methodology provides otherwise inaccessible experimental validation for particle-resolved computational fluid dynamics models and allows, e.g., observation of inertial focusing effects and microstructural dynamics relevant to suspension rheology and biomedical flows. This work paves the way for high-resolution, time-resolved 4D imaging of complex multiphase flows across a range of scientific and industrial applications. Combining XMPI with recent AI-supported 4D reconstruction algorithms opens a new spatiotemporal frontier for high-speed, rotation-free microtomography.

physics.flu-dyn↗

Local slip length and surfactant effects on liquid-infused surfaces

Robust surfaces capable of reducing flow drag, controlling heat and mass transfer, and resisting fouling in fluid flows are important for various applications. In this context, textured surfaces impregnated with a liquid lubricant show promise due to their ability to sustain a liquid-liquid layer that induces slippage. However, theoretical and numerical studies suggest that the slippage can be compromised by surfactants in the overlying fluid, which contaminate the liquid-liquid interface and generate Marangoni stresses. In this study, we use Doppler-optical coherence tomography, an interferometric imaging technique, combined with numerical simulations to investigate how surfactants influence the slip length of lubricant-infused surfaces with longitudinal grooves in a laminar flow. We introduce surfactants by adding tracer particles (milk) to the working fluid (water). Local measurements of slip length at the liquid-liquid interface are significantly smaller than theoretical predictions for clean interfaces (Schönecker & Hardt 2013). In contrast, measurements are in good agreement with numerical simulations of fully immobilized interfaces, indicating that milk particles adsorbed at the interface are responsible for the reduction in slippage. This work provides the first experimental evidence that liquid-liquid interfaces within textured surfaces can become immobilized in the presence of surfactants and flow.

physics.flu-dyn↗

Optical Coherence Tomography in Soft Matter

Optical Coherence Tomography (OCT) has become an indispensable tool for investigating mesoscopic features in soft matter and fluid mechanics. Its ability to provide high-resolution, non-invasive measurements in both spatial and temporal domains bridges critical gaps in experimental instrumentation, enabling the study of complex, confined, and dynamic systems. This review serves as both an introduction to OCT and a practical guide for researchers seeking to adopt this technology. A set of tutorials, complemented by Python scripts, are provided for both intensity- and Doppler-based techniques. The versatility of OCT is illustrated through case studies, including time-resolved velocimetry, particle-based velocity measurements, slip velocity characterization, detection of shear-induced structures, and analysis of fluid-fluid and fluid-structure interactions. Drawing on our experiences, we also present a set of practical guidelines for avoiding common pitfalls.

physics.flu-dyn↗

Turbulent pipe flow with spherical particles: drag as a function of particle size and volume fraction

Suspensions of finite-size solid particles in a turbulent pipe flow are found in many industrial and technical flows. Due to the ample parameter space consisting of particle size, concentration, density and Reynolds number, a complete picture of the particle-fluid interaction is still lacking. Pressure drop predictions are often made using viscosity models only considering the bulk solid volume fraction. For the case of turbulent pipe flow laden with neutrally buoyant spherical particles, we investigate the pressure drop and overall drag (friction factor), fluid velocity and particle distribution in the pipe. We use a combination of experimental (MRV) and numerical (DNS) techniques and a continuum flow model. We find that the particle size and the bulk flow rate influence the mean fluid velocity, velocity fluctuations and the particle distribution in the pipe for low flow rates. However, the effects of the added solid particles diminish as the flow rate increases. We created a master curve for drag change compared to single-phase flow for the particle-laden cases. This curve can be used to achieve more accurate friction factor predictions than the traditional modified viscosity approach that does not account for particle size.

physics.flu-dyn↗

Contact-angle hysteresis provides resistance to drainage of liquid-infused surfaces in turbulent flows

Lubricated textured surfaces immersed in liquid flows offer tremendous potential for reducing fluid drag, enhancing heat and mass transfer, and preventing fouling. According to current design rules, the lubricant must chemically match the surface to remain robustly trapped within the texture. However, achieving such chemical compatibility poses a significant challenge for large-scale flow systems, as it demands advanced surface treatments or severely limits the range of viable lubricants. In addition, chemically tuned surfaces often degrade over time in harsh environments. Here, we demonstrate that a lubricant-infused surface (LIS) can resist drainage in the presence of external shear flow without requiring chemical compatibility. Surfaces featuring longitudinal grooves can retain up to 50% of partially wetting lubricants in fully developed turbulent flows. The retention relies on contact-angle hysteresis, where triple-phase contact lines are pinned to substrate heterogeneities, creating capillary resistance that prevents lubricant depletion. We develop an analytical model to predict the maximum length of pinned lubricant droplets in microgrooves. This model, validated through a combination of experiments and numerical simulations, can be used to design chemistry-free LISs for applications where the external environment is continuously flowing. Our findings open up new possibilities for using functional surfaces to control transport processes in large systems.

physics.flu-dyn↗

Breaking the Reptation Trap: Escape Dynamics of Semi-Flexible Polymers in Crowded Networks

Semi-flexible polymers in crowded environments exhibit complex dynamics that play a crucial role in various biological and material design processes. Based on the classic reptation theory, it is generally believed that semiflexible polymers are trapped within static confinements. Here we demonstrate that semi-flexible polymers are indeed trapped in short-lived kinetic cages. We have developed a novel scaling law for rotational diffusion through the examination of the polymer network at the level of an individual nanofiber and quantify the onset of entanglement and entanglement itself by introducing an effective tube diameter. We also show that understanding these dynamics is critical for interpreting the macroscopic behavior of such systems, as evidenced by our micro-rheology analysis. The insight from our study provides a rectified microscopic understanding of the dynamics of semi-flexible polymers in complex environments, yielding new principles to better understand the macroscopic behavior of crowded systems, from biophysics to materials science.

cond-mat.soft↗

Experimental Investigation on Particle-Laden Flows of Viscoelastic Fluids in Micro-Channels Using Optical Coherence Tomography

Considering the nonlinear response of non-Newtonian fluids to the local shear exerted on the bulks of fluid, the initially quasi-uniform distribution of the particles might be subject to alteration as well, due to the unbalanced force distribution on the particles. The current research investigates such particle migrations for flows of Viscoelastic Fluids (VEFs) in a straight micro-channel with a 1 by 3.25 mm rectangular cross-section. Polyacrylamide polymer in concentrations of 210 and 250 ppm have been used, where the heavy, linear, long-chain structure of the polymer introduces elasticity to the fluid. The flow measurements are performed using the state-of-the-art Optical Coherence Tomography (OCT) in 2D acquisition and doppler modes (D-OCT) to simultaneously resolve tomographic velocity field, and the transition of particles through the monitored cross-sections. Through the implementation of the experimental method in the current manuscript, the capability and convenience of using OCT for the problem at hand are demonstrated, as the abovementioned obtained data were to be equivalently captured by simultaneous use of Particle Image Velocimetry (PIV), for the ambient medium velocity field, and Lagrangian Particle Tracking (LPT) schemes, for identification and tracking the position of the particles. The velocity field is obtained with the spatial resolution of 2.58um in the depth direction, and through sub-pixel image processing, highly accurate positioning of the particles is realized. The experimental results are then used for statistical calculations, such as the Probability Distribution Function (PDF) of the cross-sectional map of the space frequented by the particles to explain the underlying physics.

physics.flu-dyn↗

Droplet impact on asymmetric hydrophobic microstructures

Textured hydrophobic surfaces that repel liquid droplets unidirectionally are found in nature such as butterfly wings and ryegrass leaves and are also essential in technological processes such as self-cleaning and anti-icing. However, droplet impact on such surfaces is not fully understood. Here, we study, using a high-speed camera, droplet impact on surfaces with inclined micropillars. We observed directional rebound at high impact speeds on surfaces with dense arrays of pillars. We attribute this asymmetry to the difference in wetting behavior of the structure sidewalls, causing slower retraction of the contact line in the direction against the inclination compared to with the inclination. The experimental observations are complemented with numerical simulations to elucidate the detailed movement of the drops over the pillars. These insights improve our understanding of droplet impact on hydrophobic microstructures and may be a useful for designing structured surfaces for controlling droplet mobility.

physics.flu-dyn↗

Formation of colloidal threads in geometrically varying flow-focusing channels

When two miscible fluids are brought into contact with each other, the concentration gradients induce stresses. These are referred to as Korteweg stresses and are analogous to interfacial tension between two immiscible fluids, thereby acting as an effective interfacial tension (EIT) in inhomogeneous miscible systems. EIT governs the formation of a viscous thread in flow-focusing of two miscible fluids. To further investigate its significance, we have studied thread formation of a colloidal dispersion focused by its own solvent. Experiments are combined with three-dimensional numerical models to systematically expand previous knowledge utilising different flow-focusing channel setups. In the reference setup, the sheath flows impinge the core flow orthogonally while in four other channel setups, the sheath flows impinge the core flow at an oblique angle that is both positive and negative with respect to the reference sheath direction. As an initial estimate of the EIT, we fit the experimentally determined thread shape in the reference setup to a master curve that depends on EIT through an effective capillary number. By numerically reproducing these experimental results, it is concluded that the estimated EIT is within 25% of the optimal EIT value that can be deduced by iteratively fitting the numerical results to the experimental measurements. Regardless of channel setups, further numerical calculations performed using the optimal EIT evaluated from the reference setup show good agreement with the experimental findings in terms of thread shapes, wetted region morphologies, and velocity flow fields. The one-to-one comparison of numerical and experimental findings unveil the crucial role of EIT on the thread detachment from the top and bottom walls of the channel, bringing useful insights to understand the physical phenomenons involved in miscible systems with a high-viscosity contrast.

physics.flu-dyn↗

Droplet impact on surfaces with asymmetric microscopic features

The impact of liquid drops on a rigid surface is central in cleaning, cooling and coating processes in both nature and industrial applications. However, it is not clear how details of pores, roughness and texture on the solid surface influence the initial stages of the impact dynamics. Here, we experimentally study drop impacting at low velocities onto surfaces textured with asymmetric (tilted) ridges. We define the line-friction capillary number $Ca_f={μ_f V_0}/σ$ (where $μ_f$, $V_0$ and $σ$ are the line friction, impact velocity and surface tension, respectively) as a measure of the importance of the topology of surface textures for the dynamics of droplet impact. We show that when $Ca_f \ll 1$, the contact line speed in the direction against the inclination of the ridges is set by line-friction, whereas in the direction with inclination the contact line is pinned at acute corners of the ridge. When $Ca_f \sim 1$, the pinning is only temporary until the liquid-vapor interface reaches to the next ridge where a new contact line is formed. Finally, when $Ca_f\gg 1$, the geometric details of non-smooth surfaces play little role.

physics.flu-dyn↗

Parabolic velocity profile causes drift of inertial prolate spheroids -- but gravity is stronger

Motion of elongated particles in shear is studied. In applications where particles are much heavier than the carrying fluid, e.g. aerosols, the influence of particle inertia dominates the particle dynamics. Assuming that the particle only experiences a local linear velocity profile, its rotational and translational motion are independent. However, we show that quadratic terms of the local velocity profile combined with particle inertia cause a lateral drift of prolate spheroidal particles. We find that this drift is maximal when particle inertial forces are of the same order of magnitude as viscous forces, and that both extremely light and extremely heavy particles have negligible drift. In the non-inertial case, the particle rotates according to the local linear velocity profile, with each instantaneous orientation corresponding to a velocity that gives zero force on the particle. This results in a translational motion in the flow direction with periodic velocity fluctuations. With added particle inertia, the particle is slow to react to the surrounding fluid motion and the particle will switch between slower and faster rotation compared to the zero-force solution. The final motion that gives zero integrated force over a rotational period, is a motion with a lateral drift. We show that this drift is purely an effect of the non-sphericity of the particle and its translational inertia, while rotational inertia is negligible. Finally, although this inertial drift will contribute to the lateral motion of heavy elongated particles in channel flow, sedimentation due to gravity will dominate in any practical application on earth.

physics.flu-dyn↗

Droplet leaping governs microstructured surface wetting

Microstructured surfaces that control the direction of liquid transport are not only ubiquitous in nature, but they are also central to technological processes such as fog/water harvesting, oil-water separation, and surface lubrication. However, a fundamental understanding of the initial wetting dynamics of liquids spreading on such surfaces is lacking. Here, we show that three regimes govern microstructured surface wetting on short time scales: spread, stick, and contact line leaping. The latter involves establishing a new contact line downstream of the wetting front as the liquid leaps over specific sections of the solid surface. Experimental and numerical investigations reveal how different regimes emerge in different flow directions during wetting of periodic asymmetrically microstructured surfaces. These insights improve our understanding of rapid wetting in droplet impact, splashing, and wetting of vibrating surfaces and may contribute to advances in designing structured surfaces for the mentioned applications.

physics.flu-dyn↗

Finite-size spherical particles in a square duct flow of an elastoviscoplastic fluid: an experimental study

The present experimental study addresses the flow of a Yield Stress Fluid with some elasticity (Carbopol gel) in a square duct. The behaviour of two fluids with lower and higher yield stress is investigated at multiple Reynolds numbers $Re^* \in$ (1, 200) and Bingham numbers $Bi \in$ (0.01, 0.35). A secondary flow consisting of eight vortices is observed to recirculate the fluid from the corners to the core. Their extent and intensity grows with increasing $Re^*$. The second objective of this study is to explore the change in flow in the presence of particles. Almost neutrally-buoyant finite-size spherical particles with duct height, $2H$, to particle diameter, $d_p$, ratio of 12 are used at two volume fractions $ϕ$ = 5 and 10\%. Particle Tracking Velocimetry (PTV) is used to measure the velocity of these refractive-index-matched spheres, and PIV to extract the fluid velocity. Simple shadowgraphy is also used for qualitatively visualising the development of the particle distribution along the streamwise direction. The particle distribution pattern changes from being concentrated at the four corners, at low flow rates, to being focussed along a diffused ring between the center and the corners, at high flow rates. The presence of particles induces streamwise and wall-normal velocity fluctuations in the fluid phase; however, the primary Reynolds shear stress is still very small compared to turbulent flows. The size of the plug in the particle-laden cases appears to be smaller than the corresponding single phase cases. Similar to Newtonian fluids, the friction factor increases due to the presence of particles, almost independently of the suspending fluid matrix. Interestingly, predictions based on an increased effective suspension viscosity agrees quite well with the experimental friction factor for the concentrations used in this study.

physics.flu-dyn↗

Effective interfacial tension in flow-focusing of colloidal dispersions: 3D numerical simulations and experiments

An interface between two miscible fluids is transient, existing as a non-equilibrium state before complete molecular mixing is reached. However, during the existence of such an interface, which typically be at short timescales, composition gradients at the boundary between the two liquids cause stresses effectively mimicking an interfacial tension. Here, we combine numerical modelling and experiments to study the influence of an effective interfacial tension between a colloidal fibre dispersion and its own solvent on the flow in a microfluidic system. In a flow-focusing channel, the dispersion is injected as core flow that is hydrodynamically focused by its solvent as sheath flows. This leads to the formation of a long fluid thread, which is characterised in 3D using Optical Coherence Tomography and simulated using a volume of fluid method. The simulated flow and thread geometries very closely reproduce the experimental results in terms of thread topology and velocity flow fields. By varying the effective interfacial tension numerically, we show that it clearly influences threading dynamics and that it can be described by an effective capillary number. Furthermore, we demonstrate that the applied methodology provide means to measure the ultra-low but dynamically highly significant effective interfacial tension.

physics.flu-dyn↗

Characterizing the Orientational and Network Dynamics of Polydisperse Nanofibres at the Nanoscale

Polydisperse fibre networks are the basis of many natural and man-made architectures, ranging from high-performance bio-based materials to components of living cells and tissues. The formation and persistence of such networks are given by fibre properties such as length and stiffness as well as the number density and fibre-fibre interactions. Studies of fibre network behavior, such as connectivity or rigidity thresholds, typically assume fixed fibre length and isotropic fibre orientation distributions, specifically for nanoscale fibres where the methods providing time-resolved measurements are limited. Using birefringence measurements in a microfluidic flow-focusing channel combined with a flow-stop procedure, we here propose a methodology allowing investigations of length dependent rotational dynamics of nanoscale polydisperse fibre suspensions, including effects of non-isotropic orientation distributions. Transition from rotational mobility to rigidity at entanglement thresholds is specifically addressed for a number of nanocellulose suspensions, which are used as model nanofibre systems. The results show that the proposed method allows characterization of the subtle interplay between Brownian diffusion and nanoparticle alignment on network dynamics.

cond-mat.soft↗

Turbulence modulation by finite-size spherical particles in Newtonian and viscoelastic fluids

We experimentally investigate the influence of finite-size spherical particles in turbulent flows of a Newtonian and a drag reducing viscoelastic fluid at varying particle volume fractions and fixed Reynolds number. Experiments are performed in a square duct at a Reynolds number $Re_{2H}$ of nearly $1.1\times10^4$, Weissenberg number $Wi$ for single-phase flow is between 1-2 and results in a drag-reduction of 43% compared to a Newtonian flow (at the same $Re_{2H}$). Particles are almost neutrally-buoyant hydrogel spheres having a density ratio of 1.0035$\pm$0.0003 and a duct height ${2H}$ to particle diameter $d_p$ ratio of around 10. We measure flow statistics for four different volume fractions $ϕ$ namely 5, 10, 15 and 20% by using refractive-index-matched Particle Image Velocimetry (PIV). For both Newtonian Fluid (NF) and Viscoelastic Fluid (VEF), the drag monotonically increases with $ϕ$. For NF, the magnitude of drag increase due to particle addition can be reasonably estimated using a concentration dependent effective viscosity for volume fractions below 10%. The drag increase is, however, underestimated at higher $ϕ$. For VEF, the absolute value of drag is lower than NF but, its rate of increase with $ϕ$ is higher. Similar to particles in a NF, particles in VEF tend to migrate towards the center of the duct and form a layer of high concentration at the wall. Interestingly, relatively higher migration towards the center and lower migration towards the walls is observed for VEF. The primary Reynolds shear stress reduces with increasing $ϕ$ throughout the duct height for both types of fluid.

physics.flu-dyn↗