arXiv Science⌕ Search

arXiv subjects

Feng Gao

Publications and source records attributed to Feng Gao.

At least 181 records · Page 10Linked to original sources

Moirai: Towards Optimal Placement for Distributed Inference on Heterogeneous Devices

The escalating size of Deep Neural Networks (DNNs) has spurred a growing research interest in hosting and serving DNN models across multiple devices. A number of studies have been reported to partition a DNN model across devices, providing device placement solutions. The methods appeared in the literature, however, either suffer from poor placement performance due to the exponential search space or miss an optimal placement as a consequence of the reduced search space with limited heuristics. Moreover, these methods have ignored the runtime inter-operator optimization of a computation graph when coarsening the graph, which degrades the end-to-end inference performance. This paper presents Moirai that better exploits runtime inter-operator fusion in a model to render a coarsened computation graph, reducing the search space while maintaining the inter-operator optimization provided by inference backends. Moirai also generalizes the device placement algorithm from multiple perspectives by considering inference constraints and device heterogeneity.Extensive experimental evaluation with 11 large DNNs demonstrates that Moirai outperforms the state-of-the-art counterparts, i.e., Placeto, m-SCT, and GETF, up to 4.28$\times$ in reduction of the end-to-end inference latency. Moirai code is anonymously released at \url{https://github.com/moirai-placement/moirai}.

cs.DC↗

Second-harmonic generation with a 440,000% W-1 conversion efficiency in a lithium niobate microcavity without periodic poling

Thin-film lithium niobate (TFLN) enables extremely high-efficiency second-order nonlinear optical effects due to large nonlinear coefficient d33 and strong optical field localization. Here, we first designed and fabricated a pulley-waveguide-coupled microring resonator with an intrinsic quality factor above 9.4 x10^5 on the reverse-polarized double-layer X-cut TFLN. In such a TFLN resonator without fine domain structures, second harmonic generation with an absolute (normalized) conversion efficiency of 30% (440,000% W-1), comparable to that in periodically poled lithium niobate (PPLN) microring resonators, was realized with a sub-microwatt continuous pump. This work reduces the dependence of high-efficiency nonlinear frequency conversion on PPLN microcavities that are difficult to prepare.

physics.optics↗

Planning as In-Painting: A Diffusion-Based Embodied Task Planning Framework for Environments under Uncertainty

Task planning for embodied AI has been one of the most challenging problems where the community does not meet a consensus in terms of formulation. In this paper, we aim to tackle this problem with a unified framework consisting of an end-to-end trainable method and a planning algorithm. Particularly, we propose a task-agnostic method named 'planning as in-painting'. In this method, we use a Denoising Diffusion Model (DDM) for plan generation, conditioned on both language instructions and perceptual inputs under partially observable environments. Partial observation often leads to the model hallucinating the planning. Therefore, our diffusion-based method jointly models both state trajectory and goal estimation to improve the reliability of the generated plan, given the limited available information at each step. To better leverage newly discovered information along the plan execution for a higher success rate, we propose an on-the-fly planning algorithm to collaborate with the diffusion-based planner. The proposed framework achieves promising performances in various embodied AI tasks, including vision-language navigation, object manipulation, and task planning in a photorealistic virtual environment. The code is available at: https://github.com/joeyy5588/planning-as-inpainting.

cs.CV↗

Networked Time Series Prediction with Incomplete Data via Generative Adversarial Network

A networked time series (NETS) is a family of time series on a given graph, one for each node. It has a wide range of applications from intelligent transportation, environment monitoring to smart grid management. An important task in such applications is to predict the future values of a NETS based on its historical values and the underlying graph. Most existing methods require complete data for training. However, in real-world scenarios, it is not uncommon to have missing data due to sensor malfunction, incomplete sensing coverage, etc. In this paper, we study the problem of NETS prediction with incomplete data. We propose NETS-ImpGAN, a novel deep learning framework that can be trained on incomplete data with missing values in both history and future. Furthermore, we propose Graph Temporal Attention Networks, which incorporate the attention mechanism to capture both inter-time series and temporal correlations. We conduct extensive experiments on four real-world datasets under different missing patterns and missing rates. The experimental results show that NETS-ImpGAN outperforms existing methods, reducing the MAE by up to 25%.

cs.LG↗

Roadmap on Perovskite Light-Emitting Diodes

In recent years, the field of metal-halide perovskite emitters has rapidly emerged as a new community in solid-state lighting. Their exceptional optoelectronic properties have contributed to the rapid rise in external quantum efficiencies (EQEs) in perovskite light-emitting diodes (PeLEDs) from <1% (in 2014) to approaching 30% (in 2023) across a wide range of wavelengths. However, several challenges still hinder their commercialization, including the relatively low EQEs of blue/white devices, limited EQEs in large-area devices, poor device stability, as well as the toxicity of the easily accessible lead components and the solvents used in the synthesis and processing of PeLEDs. This roadmap addresses the current and future challenges in PeLEDs across fundamental and applied research areas, by sharing the community's perspectives. This work will provide the field with practical guidelines to advance PeLED development and facilitate more rapid commercialization.

physics.optics↗

Tentative detection of cyanoformamide NCCONH2 in space

The peptide-like molecules, cyanoformamide (NCCONH2), is the cyano (CN) derivative of formamide (NH2CHO). It is known to play a role in the synthesis of nucleic acid precursors under prebiotic conditions. In this paper, we present a tentative detection of NCCONH2 in the interstellar medium (ISM) with the Atacama Large Millimeter/submillimeter Array (ALMA) archive data. Ten unblended lines of NCCONH2 were seen around 3sigma noise levels toward Sagittarius B2(N1E), a position that is slightly offset from the continuum peak. The column density of NCCONH2 was estimated to be 2.4\times 10^15 cm ^-2, and the fractional abundance of NCCONH2 toward Sgr B2(N1E) was 6.9\times10^-10. The abundance ratio between NCCONH2 and NH2CHO is estimated to be ~0.01. We also searched for other peptide-like molecules toward Sgr B2(N1E). The abundances of NH2CHO, CH3NCO and CH3NHCHO toward Sgr B2(N1E) were about one tenth of those toward Sgr B2(N1S), while the abundances of CH3CONH2 was only one twentieth of that toward Sgr B2(N1S).

astro-ph.GA↗

Human Motion Generation: A Survey

Human motion generation aims to generate natural human pose sequences and shows immense potential for real-world applications. Substantial progress has been made recently in motion data collection technologies and generation methods, laying the foundation for increasing interest in human motion generation. Most research within this field focuses on generating human motions based on conditional signals, such as text, audio, and scene contexts. While significant advancements have been made in recent years, the task continues to pose challenges due to the intricate nature of human motion and its implicit relationship with conditional signals. In this survey, we present a comprehensive literature review of human motion generation, which, to the best of our knowledge, is the first of its kind in this field. We begin by introducing the background of human motion and generative models, followed by an examination of representative methods for three mainstream sub-tasks: text-conditioned, audio-conditioned, and scene-conditioned human motion generation. Additionally, we provide an overview of common datasets and evaluation metrics. Lastly, we discuss open problems and outline potential future research directions. We hope that this survey could provide the community with a comprehensive glimpse of this rapidly evolving field and inspire novel ideas that address the outstanding challenges.

cs.CV↗

High-efficiency edge couplers enabled by vertically tapering on lithium-niobate photonic chips

In the past decade, photonic integrated circuits (PICs) based on thin-film lithium niobate (TFLN) have advanced in various fields, including optical communication, nonlinear photonics, and quantum optics. A critical component is an efficient edge coupler connecting PICs to light sources or detectors. Here, we propose an innovative edge coupler design with a wedge-shaped TFLN waveguide and a silicon oxynitride (SiON) cladding. Experimental results show that the coupling loss between the TFLN PIC and a 3-μm mode field diameter (MFD) lensed fiber is low at 1.52 dB/facet, with the potential for improvement to 0.43 dB/facet theoretically. The coupling loss between the edge coupler and a UHNA7 fiber with an MFD of 3.2 μm is reduced to 0.92 dB/facet. This design maintains robust fabrication and alignment tolerance. Importantly, the minimum linewidth of the TFLN waveguide of the coupler (600 nm) can be easily achieved using foundry-available i-line stepper lithography. This work benefits the development of TFLN integrated platforms, such as on-chip electro-optic modulators, frequency comb generation, and quantum sensors.

physics.optics↗

SS-MAE: Spatial-Spectral Masked Auto-Encoder for Multi-Source Remote Sensing Image Classification

Masked image modeling (MIM) is a highly popular and effective self-supervised learning method for image understanding. Existing MIM-based methods mostly focus on spatial feature modeling, neglecting spectral feature modeling. Meanwhile, existing MIM-based methods use Transformer for feature extraction, some local or high-frequency information may get lost. To this end, we propose a spatial-spectral masked auto-encoder (SS-MAE) for HSI and LiDAR/SAR data joint classification. Specifically, SS-MAE consists of a spatial-wise branch and a spectral-wise branch. The spatial-wise branch masks random patches and reconstructs missing pixels, while the spectral-wise branch masks random spectral channels and reconstructs missing channels. Our SS-MAE fully exploits the spatial and spectral representations of the input data. Furthermore, to complement local features in the training stage, we add two lightweight CNNs for feature extraction. Both global and local features are taken into account for feature modeling. To demonstrate the effectiveness of the proposed SS-MAE, we conduct extensive experiments on three publicly available datasets. Extensive experiments on three multi-source datasets verify the superiority of our SS-MAE compared with several state-of-the-art baselines. The source codes are available at \url{https://github.com/summitgao/SS-MAE}.

eess.IV↗

Sulphur isotopes toward Sagittarius B2 extended envelope in the Galactic Center

The isotopic ratios are good tools for probing the stellar nucleosynthesis and chemical evolution. We performed high-sensitivity mapping observations of the J=7-6 rotational transitions of OCS, OC34S, O13CS, and OC33S toward the Galactic Center giant molecular cloud, Sagittarius B2 (Sgr B2) with IRAM 30m telescope. Positions with optically thin and uncontaminated lines are chosen to determine the sulfur isotope ratios. A 32S/34S ratio of 17.1\pm0.9 was derived with OCS and OC34S lines, while 34S/33S ratio of 6.8\pm1.9 was derived directly from integrated intensity ratio of OC34S and OC33S. With independent and accurate measurements of 32S/34S ratio, our results confirm the termination of the decreasing trend of 32S/34S ratios toward the Galactic Center, suggesting a drop in the production of massive stars at the Galactic centre.

astro-ph.GA↗

Learning non-Markovian Decision-Making from State-only Sequences

Conventional imitation learning assumes access to the actions of demonstrators, but these motor signals are often non-observable in naturalistic settings. Additionally, sequential decision-making behaviors in these settings can deviate from the assumptions of a standard Markov Decision Process (MDP). To address these challenges, we explore deep generative modeling of state-only sequences with non-Markov Decision Process (nMDP), where the policy is an energy-based prior in the latent space of the state transition generator. We develop maximum likelihood estimation to achieve model-based imitation, which involves short-run MCMC sampling from the prior and importance sampling for the posterior. The learned model enables \textit{decision-making as inference}: model-free policy execution is equivalent to prior sampling, model-based planning is posterior sampling initialized from the policy. We demonstrate the efficacy of the proposed method in a prototypical path planning task with non-Markovian constraints and show that the learned model exhibits strong performances in challenging domains from the MuJoCo suite.

cs.LG↗

Mapping Observations of Peptide-like molecules around Sagittarius B2

Peptide-like molecule, which has a close connection with the origin of life, has been detected in universe. Mapping observations of HCONH$_2$ and CH$_3$CONH$_2$, two simplest peptide-like molecules, are performed towards Sagittarius B2 (Sgr B2) complex with the IRAM 30m telescope. Seven transitions of HCONH$_2$ and five transitions of CH$_3$CONH$_2$ are used in analysis. The spatial distribution of excitation temperature and column density of HCONH$_2$ in the molecular envelope of Sgr B2 are obtained by the rotation diagrams. Assuming the same excitation temperature as HCONH$_2$, the column densities of CH$_3$CONH$_2$ are also calculated. The results show that excitation temperature ranges from 6 K to 46 K in the molecular envelope of Sgr B2. The abundance ratio between HCONH$_2$ and CH$_3$CONH$_2$ are calculated to explore the relationship among them, as well as HNCO mentioned in our pervious research. The abundance ratio of CH$_3$CONH$_2$/HCONH$_2$ varies from 10% to 20%, while that of HCONH$_2$/HNCO ranges from 1.5% to 10%. CH$_3$CONH$_2$ is enhanced with respect to HCONH$_2$ in the northwest region of Sgr B2. One transition of H$^{13}$CONH$_2$ is detected toward 12 positions of Sgr B2, from which a $^{12}$C/$^{13}$C ratio of 28.7 is obtained. A time-dependent chemical model with a short duration of X-ray burst is used to explain the observed abundances of HCONH$_2$ and CH$_3$CONH$_2$, with the best fitting result at T$\rm_{dust}$ = 53-56 K. More chemical reactions are required to be included into the model since the modeled abundance is lower than the observed one at the observed T$\rm_{dust}$.

astro-ph.GA↗

A Critical Insight into Pretransitional Behavior and Dielectric Tunability of Relaxor Ceramics

The model discussion focused on links between the unique properties of relaxor ceramics and the basics of critical phenomena physics and glass transition physics. It indicates the significance of uniaxiality for appearing mean-field features near paraelectric_ferroelectric transition. Pretransitional fluctuations, increasing up to grain size and leading to inter-grain, random, local electric fields, are indicated to be responsible for relaxor ceramics characteristics. Their impacts yield the pseudo spinodal behavior associated with weakly discontinuous local phase transitions. The emerging model redefines the meaning of the Burns temperature and polar nanoregions PNRs. It explains coherently dielectric constant changes with the diffused maximum near paraelectric_ferroelectric transition, the sensitivity even to moderate electric fields, tunability, and the glassy dynamics. These considerations are confronted with experimental results for the complex dielectric permittivity studies in relaxor ceramic, covering the 200K range, from the paraelectric to the deep ferroelectric phase. The distortions-sensitive and derivative-based analysis revealed the preference for the exponential scaling pattern in the paraelectric phase and the surroundings of the paraelectric-ferroelectric transition. It may suggest the Griffith phase behavior associated with the mean-field criticality disturbed by random local impacts. The discussion of experimental results is supplemented by relaxation times changes and the coupled energy losses analysis. The studies also led to the description of tunability temperature changes with scaling relations.

physics.app-ph↗

OmniDrones: An Efficient and Flexible Platform for Reinforcement Learning in Drone Control

In this work, we introduce OmniDrones, an efficient and flexible platform tailored for reinforcement learning in drone control, built on Nvidia's Omniverse Isaac Sim. It employs a bottom-up design approach that allows users to easily design and experiment with various application scenarios on top of GPU-parallelized simulations. It also offers a range of benchmark tasks, presenting challenges ranging from single-drone hovering to over-actuated system tracking. In summary, we propose an open-sourced drone simulation platform, equipped with an extensive suite of tools for drone learning. It includes 4 drone models, 5 sensor modalities, 4 control modes, over 10 benchmark tasks, and a selection of widely used RL baselines. To showcase the capabilities of OmniDrones and to support future research, we also provide preliminary results on these benchmark tasks. We hope this platform will encourage further studies on applying RL to practical drone systems.

cs.RO↗

Convolution and Attention Mixer for Synthetic Aperture Radar Image Change Detection

Synthetic aperture radar (SAR) image change detection is a critical task and has received increasing attentions in the remote sensing community. However, existing SAR change detection methods are mainly based on convolutional neural networks (CNNs), with limited consideration of global attention mechanism. In this letter, we explore Transformer-like architecture for SAR change detection to incorporate global attention. To this end, we propose a convolution and attention mixer (CAMixer). First, to compensate the inductive bias for Transformer, we combine self-attention with shift convolution in a parallel way. The parallel design effectively captures the global semantic information via the self-attention and performs local feature extraction through shift convolution simultaneously. Second, we adopt a gating mechanism in the feed-forward network to enhance the non-linear feature transformation. The gating mechanism is formulated as the element-wise multiplication of two parallel linear layers. Important features can be highlighted, leading to high-quality representations against speckle noise. Extensive experiments conducted on three SAR datasets verify the superior performance of the proposed CAMixer. The source codes will be publicly available at https://github.com/summitgao/CAMixer .

eess.IV↗

TSI-Net: A Timing Sequence Image Segmentation Network for Intracranial Artery Segmentation in Digital Subtraction Angiography

Cerebrovascular disease is one of the major diseases facing the world today. Automatic segmentation of intracranial artery (IA) in digital subtraction angiography (DSA) sequences is an important step in the diagnosis of vascular related diseases and in guiding neurointerventional procedures. While, a single image can only show part of the IA within the contrast medium according to the imaging principle of DSA technology. Therefore, 2D DSA segmentation methods are unable to capture the complete IA information and treatment of cerebrovascular diseases. We propose A timing sequence image segmentation network with U-shape, called TSI-Net, which incorporates a bi-directional ConvGRU module (BCM) in the encoder. The network incorporates a bi-directional ConvGRU module (BCM) in the encoder, which can input variable-length DSA sequences, retain past and future information, segment them into 2D images. In addition, we introduce a sensitive detail branch (SDB) at the end for supervising fine vessels. Experimented on the DSA sequence dataset DIAS, the method performs significantly better than state-of-the-art networks in recent years. In particular, it achieves a Sen evaluation metric of 0.797, which is a 3% improvement compared to other methods.

eess.IV↗

Review of photoacoustic imaging plus X

Photoacoustic imaging (PAI) is a novel modality in biomedical imaging technology that combines the rich optical contrast with the deep penetration of ultrasound. To date, PAI technology has found applications in various biomedical fields. In this review, we present an overview of the emerging research frontiers on PAI plus other advanced technologies, named as PAI plus X, which includes but not limited to PAI plus treatment, PAI plus new circuits design, PAI plus accurate positioning system, PAI plus fast scanning systems, PAI plus novel ultrasound sensors, PAI plus advanced laser sources, PAI plus deep learning, and PAI plus other imaging modalities. We will discuss each technology's current state, technical advantages, and prospects for application, reported mostly in recent three years. Lastly, we discuss and summarize the challenges and potential future work in PAI plus X area.

physics.med-ph↗

Chemical reaction mechanism of pre-curing process of two-component adhesive based on deformation behavior for automobile hood

Shearing test is carried out on the joint which bonded under different pre curing processes with two component adhesives of acrylic and epoxy resin respectively. The pre curing strength is obtained, which used to analyze the relationship between the pre curing strength and time. The hoods with different pre curing strength are baking with high temperature. The deformation of different areas of the hood is measured with gauges, and the deformation characteristics of the hood after baking are acquired with comparative analysis. Combining the components of two component adhesives and DSC test, the pre curing mechanism of different adhesive systems are studied. Therefore, the key factors and regular pattern of the deformation for the hood are obtained. The results indicate that, finally deformation of the hood after high temperature baking varies with the pre curing time. The key of the pre curing time of acrylic adhesives lies in the chain initiation stage of the free radical polymerization reaction. Due to the influence of the chemical properties of methyl acrylate and its initiator, the pre curing reaction induced by free radical polymerization is very fast. The shear strength of this joint can reach to 3.67 MPa with a pre curing time of 1 h, which quickly achieving the pre cure strength required for deformation control. For epoxy adhesives, the rate determining step in pre curing process is the esterification reaction. Due to the influence of the structure of carboxylic acid, the esterification process is relatively long. Shear strength of this joint can only reach 0.87 MPa after pre curing for 4 h without external heating.

physics.chem-ph↗