arXiv subjects

Fabien Cheynis

Publications and source records attributed to Fabien Cheynis.

11 recordsLinked to original sources

arXiv2024

Van der Waals epitaxy of Weyl-semimetal Td-WTe$_2$

Epitaxial growth of WTe$_2$ offers significant advantages, including the production of high-qualityfilms, possible long range in-plane ordering and precise control over layer thicknesses. However,the mean island size of WTe$_2$ grown by molecular beam epitaxy (MBE) in litterature is only a fewtens of nanometers, which is not suitable for an implementation of devices at large lateral scales.Here we report the growth of Td-WTe$_2$ ultrathin films by MBE on monolayer (ML) graphenereaching a mean flake size of $\cong$110nm, which is, on overage, more than three time larger thanprevious results. WTe$_2$ films thicker than 5nm have been successfully synthesized and exhibit theexpected Td-phase atomic structure. We rationalize epitaxial growth of Td-WTe$_2$ and propose asimple model to estimate the mean flake size as a function of growth parameters that can be appliedto other transition metal dichalcogenides (TMDCs). Based on nucleation theory and Kolmogorov-Johnson-Meh-Avrami (KJMA) equation, our analytical model supports experimental data showinga critical coverage of 0.13ML above which WTe$_2$ nucleation becomes negligible. The quality ofmonolayer WTe$_2$ films is demonstrated from electronic band structure analysis using angle-resolved photoemission spectroscopy (ARPES) in agreement with first-principle calculationsperformed on free-standing WTe$_2$ and previous reports.

cond-mat.mtrl-sci↗

arXiv2011

Micromagnetic study of flux-closure states in Fe dots using quantitative Lorentz Microscopy

A micromagnetic study of epitaxial micron-sized iron dots is reported through the analysis of Fresnel contrast in Lorentz Microscopy. Their use is reviewed and developed through analysis of various magnetic structures in such dots. Simple Landau configuration is used to investigate various aspects of asymmetric Bloch domain walls. The experimental width of such a complex wall is first derived and its value is discussed with the help of micromagnetic simulations. Combination of these two approaches enables us to define what is really extracted when estimating asymmetric wall width in Lorentz Microscopy. Moreover, quantitative data on the magnetization inside the dot is retrieved using phase retrieval as well as new informations on the degrees of freedom of such walls. Finally, it is shown how the existence and the propagation of a surface vortex can be characterized and monitored. This demonstrates the ability to reach a magnetic sensitivity a priori hidden in Fresnel contrast, based on an original image treatment and backed-up by the evaluation of contrasts obtained from micromagnetic simulations.

cond-mat.mtrl-sci↗

arXiv2009

Asymmetric hysteresis of N\'eel caps in flux-closure magnetic dots

We investigated with XMCD-PEEM magnetic imaging the magnetization reversal processes of N\'eel caps inside Bloch walls in self-assembled, micron-sized Fe(110) dots with flux-closure magnetic state. In most cases the magnetic-dependent processes are symmetric in field, as expected. However, some dots show pronounced asymmetric behaviors. Micromagnetic simulations suggest that the geometrical features (and their asymmetry) of the dots strongly affect the switching mechanism of the N\'eel caps.

cond-mat.mtrl-sci↗

arXiv2009

How many bits may fit in a single magnetic dot? XMCD-PEEM evidences the switching of Néel caps inside Bloch domain walls

Data storage relies on the handling of two states, called bits. The market of mass storage is currently still dominated by magnetic technology, hard disk drives for the broad public and tapes for massive archiving. In these devices each bit is stored in the form of the direction of magnetization of nanosized magnetic domains, i.e. areas of ferromagnetic materials displaying a uniform magnetization. While miniaturization is the conventional way to fuel the continuous increase of device density, disruptive solutions are also sought. To these pertain in recent years many fundamental studies no longer considering the magnetic domains themselves, but the manipulation of the domain walls (DWs) that separate such domains. Concepts of storage and logic based on the propagation of DWs along lithographically-patterned stripes have been patented, while many fundamental aspects of DW propagation deeply related to condensed matter physics are still hotly debated. If one now considers magnetic dots of submicrometer dimensions, the magnetization has a tendency to curl along the outer edges of the nanostructure to close its magnetic flux and thereby reduce its magnetostatic energy. Then both domains and DWs of well-defined geometries arise, whose combined manipulation has been proposed as a multilevel magnetic storage scheme...

cond-mat.mtrl-sci↗

arXiv2009

Dimensionality cross-over in magnetism: from domain walls (2D) to vortices (1D)

Dimensionality cross-over is a classical topic in physics. Surprisingly it has not been searched in micromagnetism, which deals with objects such as domain walls (2D) and vortices (1D). We predict by simulation a second-order transition between these two objects, with the wall length as the Landau parameter. This was conrmed experimentally based on micron-sized ux-closure dots.

cond-mat.mtrl-sci↗

arXiv2009

Tunable magnetic properties of arrays of Fe(110) nanowires grown on kinetically-grooved W(110) self-organized templates

We report a detailed magnetic study of a new type of self-organized nanowires disclosed briefly previously [B. Borca et al., Appl. Phys. Lett. 90, 142507 (2007)]. The templates, prepared on sapphire wafers in a kinetically-limited regime, consist of uniaxially-grooved W(110) surfaces, with a lateral period here tuned to 15nm. Fe deposition leads to the formation of (110) 7 nm-wide wires located at the bottom of the grooves. The effect of capping layers (Mo, Pd, Au, Al) and underlayers (Mo, W) on the magnetic anisotropy of the wires was studied. Significant discrepancies with figures known for thin flat films are evidenced and discussed in terms of step anisotropy and strain-dependent surface anisotropy. Demagnetizing coeffcients of cylinders with a triangular isosceles cross-section have also been calculated, to estimate the contribution of dipolar anisotropy. Finally, the dependence of magnetic anisotropy with the interface element was used to tune the blocking temperature of the wires, here from 50K to 200 K.

cond-mat.mtrl-sci↗

arXiv2009

Controlled switching of Néel caps in flux-closure magnetic dots

While magnetic hysteresis usually considers magnetic domains, the switching of the core of magnetic vortices has recently become an active topic. We considered Bloch domain walls, which are known to display at the surface of thin films flux-closure features called Néel caps. We demonstrated the controlled switching of these caps under a magnetic field, occurring via the propagation of a surface vortex. For this we considered flux-closure states in elongated micron-sized dots, so that only the central domain wall can be addressed, while domains remain unaffected.

cond-mat.other↗

arXiv2009

Contacting individual Fe(110) dots in a single electron-beam lithography step

We report on a new approach, entirely based on electron-beam lithography technique, to contact electrically, in a four-probe scheme, single nanostructures obtained by self-assembly. In our procedure, nanostructures of interest are localised and contacted in the same fabrication step. This technique has been developed to study the field-induced reversal of an internal component of an asymmetric Bloch domain wall observed in elongated structures such as Fe(110) dots. We have focused on the control, using an external magnetic field, of the magnetisation orientation within Néel caps that terminate the domain wall at both interfaces. Preliminary magneto-transport measurements are discussed demonstrating that single Fe(110) dots have been contacted.

cond-mat.mtrl-sci↗

arXiv2008

X-ray photoelectron emission microscopy in combination with x-ray magnetic circular dichroism investigation of size effects on field-induced Néel-cap reversal

X-ray photoelectron emission microscopy in combination with x-ray magnetic circular dichroism is used to investigate the influence of an applied magnetic field on Néel caps (i.e., surface terminations of asymmetric Bloch walls). Self-assembled micron-sized Fe(110) dots displaying a moderate distribution of size and aspect ratios serve as model objects. Investigations of remanent states after application of an applied field along the direction of Néel-cap magnetization give clear evidence for the magnetization reversal of the Néel caps around 120 mT, with a $\pm$20 mT dispersion. No clear correlation could be found between the value of the reversal field and geometrical features of the dots.

cond-mat.mtrl-sci↗

arXiv2006

Growth and magnetism of self-organized arrays of Fe(110) wires formed by deposition on kinetically grooved W(110)

Homoepitaxy of W(110) and Mo(110) is performed in a kinetically-limited regime to yield a nanotemplate in the form of a uniaxial array of hills and grooves aligned along the [001] direction. The topography and organization of the grooves were studied with RHEED and STM. The nanofacets, of type {210}, are tilted 18° away from (110). The lateral period could be varied from 4 to 12nm by tuning the deposition temperature. Magnetic nanowires were formed in the grooves by deposition of Fe at 150°C on such templates. Fe/W wires display an easy axis along [001] and a mean blocking temperature Tb=100K

cond-mat.other↗

arXiv2006

Growth modes of Fe(110) revisited: a contribution of self-assembly to magnetic materials

We have revisited the epitaxial growth modes of Fe on W(110) and Mo(110), and propose an overview or our contribution to the field. We show that the Stranski-Krastanov growth mode, recognized for a long time in these systems, is in fact characterized by a bimodal distribution of islands for growth temperature in the range 250-700°C. We observe firstly compact islands whose shape is determined by Wulff-Kaischev's theorem, secondly thin and flat islands that display a preferred height, ie independant from nominal thickness and deposition procedure (1.4nm for Mo, and 5.5nm for W on the average). We used this effect to fabricate self-organized arrays of nanometers-thick stripes by step decoration. Self-assembled nano-ties are also obtained for nucleation of the flat islands on Mo at fairly high temperature, ie 800°C. Finally, using interfacial layers and solid solutions we separate two effects on the preferred height, first that of the interfacial energy, second that of the continuously-varying lattice parameter of the growth surface.

cond-mat.other↗