arXiv subjects

Emil Björnson

Publications and source records attributed to Emil Björnson.

At least 163 records · Page 9Linked to original sources

arXiv2023

Analytical Nonlinear Distortion Characterization for Frequency-Selective Massive MIMO Channels

Nonlinear distortion stemming from low-cost power amplifiers may severely affect wireless communication performance through out-of-band (OOB) radiation and in-band distortion. The distortion is correlated between different transmit antennas in an antenna array, which results in a beamforming gain at the receiver side that grows with the number of antennas. In this paper, we investigate how the strength of the distortion is affected by the frequency selectivity of the channel. A closed-form expression for the received distortion power is derived as a function of the number of multipath components (MPCs) and the delay spread, which highlight their impact. The performed analysis, which is verified via numerical simulations, reveals that as the number of MPCs increases, distortion exhibits distinct characteristics for in-band and OOB frequencies. It is shown that the received in-band and OOB distortion power is inversely proportional to the number of MPCs, and it is reported that as the delay spread gets narrower, the in-band distortion power is beamformed towards the intended user, which yields higher received in-band distortion compared to the OOB distortion.

cs.IT↗

arXiv2023

Exploiting the Depth and Angular Domains for Massive Near-Field Spatial Multiplexing

In this article, we present our vision for how extremely large aperture arrays (ELAAs), equipped with hundreds or thousands of antennas, can play a major role in future 6G networks by enabling a remarkable increase in data rates through spatial multiplexing of a massive number of data streams to both a single user and many simultaneous users. Specifically, with the quantum leap in the array aperture size, the users will be in the so-called radiative near-field region of the array, where previously negligible physical phenomena dominate the propagation conditions and give the channel matrices more favorable properties. This article presents the foundational properties of communication in the radiative near-field region and then exemplifies how these properties enable two unprecedented spatial multiplexing schemes: depth-domain multiplexing of multiple users and angular multiplexing of data streams to a single user. We also highlight research challenges and open problems that require further investigation.

eess.SP↗

arXiv2023

Optimizing Reconfigurable Intelligent Surfaces for Short Transmissions: How Detailed Configurations can be Afforded?

This paper examines how to minimize the energy consumption of a user equipment (UE) when transmitting short data payloads. The receiving base station (BS) controls a reconfigurable intelligent surface (RIS), which requires additional pilot signals to be configured, to improve the channel conditions. The challenge is that the pilot signals increase the energy consumption and must be balanced against energy savings during data transmission. We derive a formula for the energy consumption, including both pilot and data transmission powers and the effects of imperfect channel state information and discrete phase-shifts. To shorten the pilot length, we propose dividing the RIS into subarrays of multiple elements using the same reflection coefficient. The pilot power and subarray size are tuned to the payload length to minimize the energy consumption. Analytical results show that there exists a unique energy-minimizing solution. For small payloads and when the direct path loss between the BS and UE is weak compared to the path loss via the RIS, the solution is using subarrays with many elements and low pilot power and vice versa. The optimal percentage of energy spent on pilot signaling is in the order of 10-40%.

cs.IT↗

arXiv2023

Is Channel Estimation Necessary to Select Phase-Shifts for RIS-Assisted Massive MIMO?

Reconfigurable intelligent surfaces (RISs) consist of many passive elements of metamaterials whose impedance can be controllable to change the characteristics of wireless signals impinging on them. Channel estimation is a critical task when it comes to the control of a large RIS when having a channel with a large number of multipath components. In this paper, we derive Bayesian channel estimators for two RIS-assisted massive multiple-input multiple-output (MIMO) configurations: i) the short-term RIS configuration based on the instantaneous channel estimates; ii) the long-term RIS configuration based on the channel statistics. The proposed methods exploit spatial correlation characteristics at both the base station and the planar RISs, and other statistical characteristics of multi-specular fading in a mobile environment. Moreover, a novel heuristic for phase-shift selection at the RISs is developed. A computationally efficient fixed-point algorithm, which solves the max-min fairness power control optimally, is proposed. Simulation results demonstrate that the proposed uplink RIS-aided framework improves the spectral efficiency of the cell-edge mobile user equipments substantially in comparison to a conventional single-cell massive MIMO system. The impact of several channel effects are studied to gain insight about when the channel estimation, i.e., the short-term configuration, is preferable in comparison to the long-term RIS configuration to boost the spectral efficiency.

cs.IT↗

arXiv2023

Amplitude-Based Sequential Optimization of Energy Harvesting with Reconfigurable Intelligent Surfaces

Reconfigurable Intelligent Surfaces (RISs) have gained immense popularity in recent years because of their ability to improve wireless coverage and their flexibility to adapt to the changes in a wireless environment. These advantages are due to RISs' ability to control and manipulate radio frequency (RF) wave propagation. RISs may be deployed in inaccessible locations where it is difficult or expensive to connect to the power grid. Energy harvesting can enable the RIS to self-sustain its operations without relying on external power sources. In this paper, we consider the problem of energy harvesting for RISs in the absence of coordination with the ambient RF source. We consider both direct and indirect energy harvesting scenarios and show that the same mathematical model applies to them. We propose a sequential phase-alignment algorithm that maximizes the received power based on only power measurements. We prove the convergence of the proposed algorithm to the optimal value under specific circumstances. Our simulation results show that the proposed algorithm converges to the optimal solution in a few iterations and outperforms the random phase update method in terms of the number of required measurements.

eess.SP↗

arXiv2023

Impact of Pilot Contamination Between Operators With Interfering Reconfigurable Intelligent Surfaces

In this paper, we study the impact of pilot contamination in a system where two operators serve their respective users with the assistance of two wide-band reconfigurable intelligent surfaces (RIS), each belonging to a single operator. We consider one active user per operator and they use disjoint narrow frequency bands. Although each RIS is dedicated to a single operator, both users' transmissions are reflected by both RISs. We show that this creates a new kind of pilot contamination effect when pilots are transmitted simultaneously. Since combating inter-operator pilot contamination in RIS-assisted networks would require long pilot signal sequences to maintain orthogonality among the users of different operators, we propose the orthogonal configurations of the RISs. Numerical results show that this approach completely eliminates pilot contamination, and significantly improves the performance in terms of channel estimation and equalization by removing the channel estimation bias.

eess.SP↗

arXiv2023

Optimal Geometries of Dual-Polarized Arrays for Large Point-to-Point MIMO Channels

Traditional point-to-point line-of-sight channels have rank 1, irrespective of the number of antennas and array geometries, due to far-field propagation conditions. By contrast, recent papers in the holographic multiple-input multiple-output (MIMO) literature characterize the maximum channel rank that can be achieved between two continuous array apertures, which is much larger than 1 under near-field propagation conditions. In this paper, we maximize the channel capacity between two dual-polarized uniform rectangular arrays (URAs) with discrete antenna elements for a given propagation distance. In particular, we derive the antenna spacings that lead to an ideal MIMO channel where all singular values are as similar as possible. We utilize this analytic result to find the two array geometries that respectively minimize the aperture area and the aperture length.

cs.IT↗

arXiv2023

A Bayesian Approach to Characterize Unknown Interference Power in Wireless Networks

The existence of unknown interference is a prevalent problem in wireless communication networks. Especially in multi-user multiple-input multiple-output (MIMO) networks, where a large number of user equipments are served on the same time-frequency resources, the outage performance may be dominated by the unknown interference arising from scheduling variations in neighboring cells. In this letter, we propose a Bayesian method for modeling the unknown interference power in the uplink of a cellular network. Numerical results show that our method accurately models the distribution of the unknown interference power and can be effectively used for rate adaptation with guaranteed target outage performance.

eess.SP↗

arXiv2023

Energy-Efficient Cell-Free Massive MIMO Through Sparse Large-Scale Fading Processing

Cell-free massive multiple-input multiple-output (CF mMIMO) systems serve the user equipments (UEs) by geographically distributed access points (APs) by means of joint transmission and reception. To limit the power consumption due to fronthaul signaling and processing, each UE should only be served by a subset of the APs, but it is hard to identify that subset. Previous works have tackled this combinatorial problem heuristically. In this paper, we propose a sparse distributed processing design for CF mMIMO, where the AP-UE association and long-term signal processing coefficients are jointly optimized. We formulate two sparsity-inducing mean-squared error (MSE) minimization problems and solve them by using efficient proximal approaches with block-coordinate descent. For the downlink, more specifically, we develop a virtually optimized large-scale fading precoding (V-LSFP) scheme using uplink-downlink duality. The numerical results show that the proposed sparse processing schemes work well in both uplink and downlink. In particular, they achieve almost the same spectral efficiency as if all APs would serve all UEs, while the energy efficiency is 2-4 times higher thanks to the reduced processing and signaling.

eess.SP↗

arXiv2023

25 Years of Signal Processing Advances for Multiantenna Communications

Wireless communication technology has progressed dramatically over the past 25 years, in terms of societal adoption as well as technical sophistication. In 1998, mobile phones were still in the process of becoming compact and affordable devices that could be widely utilized in both developed and developing countries. There were "only" 300 million mobile subscribers in the world [1]. Cellular networks were among the first privatized telecommunication markets, and competition turned the devices into fashion accessories with attractive designs that could be individualized. The service was circumscribed to telephony and text messaging, but it was groundbreaking in that, for the first time, telecommunication was between people rather than locations. Wireless networks have changed dramatically over the past few decades, enabling this revolution in service provisioning and making it possible to accommodate the ensuing dramatic growth in traffic. There are many contributing components, including new air interfaces for faster transmission, channel coding for enhanced reliability, improved source compression to remove redundancies, and leaner protocols to reduce overheads. Signal processing is at the core of these improvements, but nowhere has it played a bigger role than in the development of multiantenna communication. This article tells the story of how major signal processing advances have transformed the early multiantenna concepts into mainstream technology over the past 25 years. The story therefore begins somewhat arbitrarily in 1998. A broad account of the state-of-the-art signal processing techniques for wireless systems by 1998 can be found in [2], and its contrast with recent textbooks such as [3]-[5] reveals the dramatic leap forward that has taken place in the interim.

eess.SP↗

arXiv2023

A New Channel Subspace Characterization for Channel Estimation in RIS-Aided Communications

A reconfigurable intelligent surface (RIS) is a holographic MIMO surface composed of a large number of passive elements that can induce adjustable phase shifts to the impinging waves. By creating virtual line-of-sight (LOS) paths between the transmitter and the receiver, RIS can be a game changer for millimeter-wave (mmWave) communication systems that typically suffer from severe signal attenuation. Reaping the benefits of RIS, however, relies on the accuracy of the channel estimation, which is a challenging task due to the large number of RIS elements. Specifically, conventional channel estimators require a pilot overhead equal to the number of RIS elements, which is impractical. Herein, we propose a novel way to approximately represent the RIS channels in a lower-dimensional subspace and derive the basis vectors for the identified subspace. We use this channel structure to only send pilots in this subspace, thereby vastly saving on the pilot overhead. Numerical results demonstrate that when the RIS has an element spacing of a quarter of the wavelength, our method reduces the pilot overhead by 80% with retained or even improved performance.

eess.SP↗

arXiv2023

Efficient LOS Channel Estimation for RIS-Aided Communications Under Non-Stationary Mobility

Reconfigurable intelligent surface (RIS) is a newly-emerged technology that, with its unique features, is considered to be a game changer for future wireless networks. Channel estimation is one of the most critical challenges for the realization of RIS-assisted communications. Non-parametric channel estimation techniques are inefficient due to the huge pilot dimensionality that stems from the large number of RIS elements. The challenge becomes more serious if we consider the mobility of the users where the channel needs to be re-estimated whenever the user moves to a new location. This paper develops a novel maximum likelihood estimator (MLE) for jointly estimating the line-of-sight (LOS) channel from the user to the RIS and the direct channel between the user and the base station. By smartly refining the RIS configuration during the channel estimation procedure, we show that the channels can be accurately estimated with only a few pilot transmissions -- much fewer than the number of RIS elements. The proposed scheme is also shown to be capable of effectively tracking the channel when the user moves around in a continuous but non-stationary manner with varying LOS angles.

eess.SP↗

arXiv2023

Optimizing Reconfigurable Intelligent Surfaces for Small Data Packets: A Subarray Approach

In this paper, we examine the energy consumption of a user equipment (UE) when it transmits a finite-sized data packet. The receiving base station (BS) controls a reconfigurable intelligent surface (RIS) that can be utilized to improve the channel conditions, if additional pilot signals are transmitted to configure the RIS. We derive a formula for the energy consumption taking both the pilot and data transmission powers into account. By dividing the RIS into subarrays consisting of multiple RIS elements using the same reflection coefficient, the pilot overhead can be tuned to minimize the energy consumption while maintaining parts of the aperture gain. Our analytical results show that there exists an energy-minimizing subarray size. For small data blocks and when the channel conditions between the BS and UE are favorable compared to the path to the RIS, the energy consumption is minimized using large subarrays. When the channel conditions to the RIS are better and the data blocks are large, it is preferable to use fewer elements per subarray and potentially configure the elements individually.

cs.IT↗

arXiv2023

Spherical Wavefronts Improve MU-MIMO Spectral Efficiency When Using Electrically Large Arrays

Modern MIMO communication systems are almost exclusively designed under the assumption of locally plane wavefronts over antenna arrays. This is known as the far-field approximation and is soundly justified at sub-6-GHz frequencies at most relevant transmission ranges. However, when higher frequencies and shorter transmission ranges are used, the wave curvature over the array is no longer negligible, and arrays operate in the so-called radiative near-field region. This letter aims to show that the classical far-field approximation may significantly underestimate the achievable spectral efficiency of multi-user MIMO communications operating in the 30-GHz bands and above, even at ranges beyond the Fraunhofer distance. For planar arrays with typical sizes, we show that computing combining schemes based on the far-field model significantly reduces the channel gain and spatial multiplexing capability. When the radiative near-field model is used, interference rejection schemes, such as the optimal minimum mean-square-error combiner, appear to be very promising, when combined with electrically large arrays, to meet the stringent requirements of next-generation networks.

cs.IT↗

arXiv2023

Power Scaling Laws and Near-Field Behaviors of Massive MIMO and Intelligent Reflecting Surfaces

The use of large arrays might be the solution to the capacity problems in wireless communications. The signal-to-noise ratio (SNR) grows linearly with the number of array elements $N$ when using Massive MIMO receivers and half-duplex relays. Moreover, intelligent reflecting surfaces (IRSs) have recently attracted attention since these can relay signals to achieve an SNR that grows as $N^2$, which seems like a major benefit. In this paper, we use a deterministic propagation model for a planar array of arbitrary size, to demonstrate that the mentioned SNR behaviors, and associated power scaling laws, only apply in the far-field. They cannot be used to study the regime where $N\to\infty$. We derive an exact channel gain expression that captures three essential near-field behaviors and use it to revisit the power scaling laws. We derive new finite asymptotic SNR limits but also conclude that these are unlikely to be approached in practice. We further prove that an IRS-aided setup cannot achieve a higher SNR than an equal-sized Massive MIMO setup, despite its faster SNR growth. We quantify analytically how much larger the IRS must be to achieve the same SNR. Finally, we show that an optimized IRS does not behave as an "anomalous" mirror but can vastly outperform that benchmark.

cs.IT↗

arXiv2023

mmWave Coverage Extension Using Reconfigurable Intelligent Surfaces in Indoor Dense Spaces

In this work, we consider the deployment of reconfigurable intelligent surfaces (RISs) to extend the coverage of a millimeter-wave (mmWave) network in indoor dense spaces. We first integrate RIS into ray-tracing simulations to realistically capture the propagation characteristics, then formulate a non-convex optimization problem that minimizes the number of RISs under rate constraints. We propose a feasible point pursuit and successive convex approximation-based algorithm, which solves the problem by jointly selecting the RIS locations, optimizing the RIS phase-shifts, and allocating time resources to user equipments (UEs). The numerical results demonstrate substantial coverage extension by using at least four RISs, and a data rate of 130 Mbit/s is guaranteed for UEs in the considered area of an airplane cabin.

cs.IT↗

arXiv2022

Improving Fairness for Cell-Free Massive MIMO Through Interference-Aware Massive Access

Cell-free massive multiple-input multiple-output (CF mMIMO) provides good interference management by coordinating many more access points (APs) than user equipments (UEs). It becomes challenging to determine which APs should serve which UEs with which pilots when the number of UEs approximates the number of APs and far exceeds the number of pilots. Compared to the previous work, a better compromise between spectral efficiency (SE) and implementation simplicity is needed in such massive access scenarios. This paper proposes an interference-aware massive access (IAMA) scheme realizing joint AP-UE association and pilot assignment for CF mMIMO by exploiting the large-scale interference features. We propose an interference-aware reward as a novel performance metric and use it to develop two iterative algorithms to optimize the association and pilot assignment. The numerical results show a prominent advantage of our IAMA scheme over the benchmark schemes in terms of the user fairness and the average SE.

cs.IT↗

arXiv2022

Maximum Likelihood Channel Estimation for RIS-Aided Communications With LOS Channels

A reconfigurable intelligent surface (RIS) reflects incoming signals in different ways depending on the phase-shift pattern assigned to its elements. The most promising use case is to aid the communication between a base station and a user when the user has a line-of-sight (LOS) channel to the RIS but the direct channel is blocked. The main challenge is to estimate the channel with limited resources because non-parametric estimation methods require a pilot length proportional to the large number of RIS elements. In this paper, we develop a parametric maximum likelihood (ML) channel estimation framework for estimating the LOS channel to the RIS. We demonstrate that the proposed algorithm can accurately obtain the channel and preferred RIS configuration using only a few pilots. A key novelty is that the RIS configurations used during pilot transmission are selected to progressively improve the estimation accuracy.

cs.IT↗