arXiv subjects

Emil Björnson

Publications and source records attributed to Emil Björnson.

At least 145 records · Page 8Linked to original sources

arXiv2024

Indoor Positioning in 5G-Advanced: Challenges and Solution towards Centimeter-level Accuracy with Carrier Phase Enhancements

After robust connectivity, precise positioning is evolving into an innovative component of 5G service offerings for industrial use-cases and verticals with challenging indoor radio environments. In this direction, the 3GPP Rel-16 standard has been a tipping point in specifying critical innovations, followed by enhancements in Rel-17 and Rel-18. In this article, we elaborate on the 5G positioning framework, measurements, and procedures before shifting the focus mainly to recently identified carrier-phase (CP) measurements in Rel-18 as a complementary measure for time- and angular-based positioning methods. We discuss the associated challenges and potential solutions for exploiting CP, including integer ambiguity, multipath sensitivity, and signaling aspects. Furthermore, we study how phase-continuous reference signaling can counter noisy phase measurements using realistic simulations to achieve centimeter-level accuracy in indoor factory (InF) scenarios.

cs.IT↗

arXiv2024

Localization in Massive MIMO Networks: From Near-Field to Far-Field

Source localization is the process of estimating the location of signal sources based on the signals received at different antennas of an antenna array. It has diverse applications, ranging from radar systems and underwater acoustics to wireless communication networks. Subspace-based approaches are among the most effective techniques for source localization due to their high accuracy, with Multiple SIgnal Classification (MUSIC) and Estimation of Signal Parameters by Rotational Invariance Techniques (ESPRIT) being two prominent methods in this category. These techniques leverage the fact that the space spanned by the eigenvectors of the covariance matrix of the received signals can be divided into signal and noise subspaces, which are mutually orthogonal. Originally designed for far-field source localization, these methods have undergone several modifications to accommodate near-field scenarios as well. This chapter aims to present the foundations of MUSIC and ESPRIT algorithms and introduce some of their variations for both far-field and near-field localization by a single array of antennas. We further provide numerical examples to demonstrate the performance of the presented methods.

eess.SP↗

arXiv2024

Pilot Length Optimization with RS-LS Channel Estimation for Extremely Large Aperture Arrays

Extremely large aperture arrays can enable unprecedented spatial multiplexing in beyond 5G systems due to their extremely narrow beamfocusing capabilities. However, acquiring the spatial correlation matrix to enable efficient channel estimation is a complex task due to the vast number of antenna dimensions. Recently, a new estimation method called the "reduced-subspace least squares (RS-LS) estimator" has been proposed for densely packed arrays. This method relies solely on the geometry of the array to limit the estimation resources. In this paper, we address a gap in the existing literature by deriving the average spectral efficiency for a certain distribution of user equipments (UEs) and a lower bound on it when using the RS-LS estimator. This bound is determined by the channel gain and the statistics of the normalized spatial correlation matrices of potential UEs but, importantly, does not require knowledge of a specific UE's spatial correlation matrix. We establish that there exists a pilot length that maximizes this expression. Additionally, we derive an approximate expression for the optimal pilot length under low signal-to-noise ratio (SNR) conditions. Simulation results validate the tightness of the derived lower bound and the effectiveness of using the optimized pilot length.

cs.IT↗

arXiv2024

Mixed Static and Reconfigurable Metasurface Deployment in Indoor Dense Spaces: How Much Reconfigurability is Needed?

In this paper, we investigate how metasurfaces can be deployed to deliver high data rates in a millimeter-wave (mmWave) indoor dense space with many blocking objects. These surfaces can either be static metasurfaces (SMSs) that reflect with fixed phase-shifts or reconfigurable intelligent surfaces (RISs) that can reconfigure their phase-shifts to the currently served user. The latter comes with an increased power, cabling, and signaling cost. To see how reconfigurability affects the network performance, we propose an iterative algorithm based on the feasible point pursuit successive convex approximation method. We jointly optimize the types and phase-shifts of the surfaces and the time portion allocated to each user equipment to maximize the minimum data rate achieved by the network. Our numerical results demonstrate that the minimum data rate improves as more RISs are introduced but the gain diminishes after some point. Therefore, introducing more reconfigurability is not always necessary. Another result shows that to reach the same data rate achieved by using 22 SMSs, at least 18 RISs are needed. This suggests that when it is costly to deploy many RISs, as an inexpensive alternative solution, one can reach the same data rate just by densely deploying more SMSs.

cs.IT↗

arXiv2024

Parametric Near-Field Channel Estimation for Extremely Large Aperture Arrays

Accurate channel estimation is critical to fully exploit the beamforming gains when communicating with extremely large aperture arrays. The propagation distances between the user and receiver, which potentially has thousands of antennas/elements, are such that they are located in the radiative near-field region of each other when considering the Fraunhofer distance of the entire array. Therefore, it is imperative to consider near-field effects to achieve proper channel estimation. This paper proposes a parametric multi-user near-field channel estimation algorithm based on MUltiple SIgnal Classification (MUSIC) method to obtain the essential parameters describing the users' locations. We derive the estimated channel by incorporating the estimated parameters into the near-field channel model. Additionally, we implement a least-squares-based estimation corrector, resulting in a precise near-field channel estimation. Simulation results demonstrate that our proposed scheme outperforms classical least-squares and minimum mean-square error channel estimation methods in terms of normalized beamforming gain and normalized mean-square error.

eess.SP↗

arXiv2024

Cell-Free Massive MIMO in O-RAN: Energy-Aware Joint Orchestration of Cloud, Fronthaul, and Radio Resources

For the energy-efficient deployment of cell-free massive MIMO functionality in a practical wireless network, the end-to-end (from radio site to the cloud) energy-aware operation is essential. In line with the cloudification and virtualization in the open radio access networks (O-RAN), it is indisputable to envision prospective cell-free infrastructure on top of the O-RAN architecture. In this paper, we explore the performance and power consumption of cell-free massive MIMO technology in comparison with traditional small-cell systems, in the virtualized O-RAN architecture. We compare two different functional split options and different resource orchestration mechanisms. In the end-to-end orchestration scheme, we aim to minimize the end-to-end power consumption by jointly allocating the radio, optical fronthaul, and virtualized cloud processing resources. We compare end-to-end orchestration with two other schemes: i) "radio-only" where radio resources are optimized independently from the cloud and ii) "local cloud coordination" where orchestration is only allowed among a local cluster of radio units. We develop several algorithms to solve the end-to-end power minimization and sum spectral efficiency maximization problems. The numerical results demonstrate that end-to-end resource allocation with fully virtualized fronthaul and cloud resources provides a substantial additional power saving than the other resource orchestration schemes.

eess.SP↗

arXiv2024

Can Far-field Beam Training Be Deployed for Cross-field Beam Alignment in Terahertz UM-MIMO Communications?

Ultra-massive multiple-input multiple-output (UM-MIMO) is the enabler of Terahertz (THz) communications in next-generation wireless networks. In THz UM-MIMO systems, a new paradigm of cross-field communications spanning from near-field to far-field is emerging, since the near-field range expands with higher frequencies and larger array apertures. Precise beam alignment in cross-field is critical but challenging. Specifically, unlike far-field beams that rely only on the angle domain, the incorporation of dual-domain (angle and distance) training significantly increases overhead. A natural question arises of whether far-field beam training can be deployed for cross-field beam alignment. In this paper, this question is answered, by demonstrating that the far-field training enables sufficient signal-to-noise ratio (SNR) in both far- and near-field scenarios, while exciting all channel dimensions. Based on that, we propose a subarray-coordinated hierarchical (SCH) training with greatly reduced overhead. To further obtain high-precision beam designs, we propose a two-phase angle and distance beam estimator (TPBE). Extensive simulations demonstrate the effectiveness of the proposed methods. Compared to near-field exhaustive search, the SCH possesses 0.2\% training overhead. The TPBE achieves 0.01~degrees and 0.02~m estimation root-mean-squared errors for angle and distance. Furthermore, with the estimated beam directions, a near-optimal SNR with 0.11~dB deviation is attained after beam alignment.

cs.IT↗

arXiv2024

Towards 6G MIMO: Massive Spatial Multiplexing, Dense Arrays, and Interplay Between Electromagnetics and Processing

The increasing demand for wireless data transfer has been the driving force behind the widespread adoption of Massive MIMO (multiple-input multiple-output) technology in 5G. The next-generation MIMO technology is now being developed to cater to the new data traffic and performance expectations generated by new user devices and services in the next decade. The evolution towards "ultra-massive MIMO (UM-MIMO)" is not only about adding more antennas but will also uncover new propagation and hardware phenomena that can only be treated by jointly utilizing insights from the communication, electromagnetic (EM), and circuit theory areas. This article offers a comprehensive overview of the key benefits of the UM-MIMO technology and the associated challenges. It explores massive multiplexing facilitated by radiative near-field effects, characterizes the spatial degrees-of-freedom, and practical channel estimation schemes tailored for massive arrays. Moreover, we provide a tutorial on EM theory and circuit theory, and how it is used to obtain physically consistent antenna and channel models. Subsequently, the article describes different ways to implement massive and dense antenna arrays, and how to co-design antennas with signal processing. The main open research challenges are identified at the end.

cs.IT↗

arXiv2023

Parametric Channel Estimation with Short Pilots in RIS-Assisted Near- and Far-Field Communications

Considering the dimensionality of a typical reconfigurable intelligent surface (RIS), channel state information acquisition in RIS-assisted systems requires lengthy pilot transmissions. Moreover, the large aperture of the RIS may cause transmitters/receivers to fall in its near-field region, where both distance and angles affect the channel structure. This paper proposes a parametric maximum likelihood estimation (MLE) framework for jointly estimating the direct channel between the user and the base station (BS) and the line-of-sight channel between the user and the RIS, in both far-field and near-field scenarios. The MLE framework is first developed for the case of single-antenna BS and later extended to the scenario where the BS is equipped with multiple antennas. A novel adaptive RIS configuration strategy is proposed to select the RIS configuration for the next pilot to actively refine the estimate. We design a minimal-sized codebook of orthogonal RIS configurations to choose from during pilot transmission with a dimension much smaller than the number of RIS elements. To further reduce the required number of pilots, we propose an initialization strategy with two wide beams. We demonstrate numerically that the proposed MLE method needs only a few pilots for achieving accurate channel estimates and further show that the presented framework performs well under Rician fading. We also showcase efficient user channel tracking in near-field and far-field scenarios.

eess.SP↗

arXiv2023

A Novel Discrete Phase Shift Design for RIS-Assisted Multi-User MIMO

Reconfigurable intelligent surface (RIS) is a newly-emerged technology that might fundamentally change how wireless networks are operated. Though extensively studied in recent years, the practical limitations of RIS are often neglected when assessing the performance of RIS-assisted communication networks. One of these limitations is that each RIS element is restricted to incur a controllable phase shift to the reflected signal from a predefined discrete set. This paper studies an RIS-assisted multi-user multiple-input multiple-output (MIMO) system, where an RIS with discrete phase shifts assists in simultaneous uplink data transmission from multiple user equipments (UEs) to a base station (BS). We aim to maximize the sum rate by optimizing the receive beamforming vectors and RIS phase shift configuration. To this end, we transform the original sum-rate maximization problem into a minimum mean square error (MMSE) minimization problem and employ the block coordinate descent (BCD) technique for iterative optimization of the variables until convergence. We formulate the discrete RIS phase shift optimization problem as a mixed-integer least squares problem and propose a novel method based on sphere decoding (SD) to solve it. Through numerical evaluation, we show that the proposed discrete phase shift design outperforms the conventional nearest point mapping method, which is prevalently used in previous works.

eess.SP↗

arXiv2023

Broad Beam Reflection for RIS-Assisted MIMO Systems with Planar Arrays

While reconfigurable intelligent surface (RIS)-aided user-specific beamforming has been vastly investigated, the aspect of utilizing RISs for assisting cell-specific transmission has been largely unattended. Aiming to fill this gap, we study a downlink broadcasting scenario where a base station (BS) sends a cell-specific signal to all the users located in a wide angular area with the assistance of a dual-polarized RIS. We utilize the polarization degree of freedom offered by this type of RIS and design the phase configurations in the two polarizations in such a way that the RIS can radiate a broad beam, thereby uniformly covering all azimuth and elevation angles where the users might reside. Specifically, the per-polarization configuration matrices are designed in such a way that the total power-domain array factor becomes spatially flat over all observation angles implying that the RIS can preserve the broad radiation pattern of a single element while boosting its gain proportionally to its aperture size. We validate the mathematical analyses via numerical simulations.

eess.SP↗

arXiv2023

A New Polar-Domain Dictionary Design for the Near-field Region of Extremely Large Aperture Arrays

A grid of orthogonal beams with zero column coherence can be easily constructed to cover all prospective user equipments (UEs) in the far-field region of a multiple-antenna base station (BS). However, when the BS is equipped with an extremely large aperture array, the Fraunhofer distance is huge, causing the UEs to be located in the radiative near-field region. This calls for designing a grid of beams based on a near-field dictionary. In the previous work, a polar-domain grid design was proposed to maintain control over the column coherence. A limitation of this approach is identified in this paper, and we propose an enhanced methodology for the design of a polar-domain dictionary specifically tailored for the near-field of an extremely large aperture uniform planar array. Through simulation results, it is demonstrated that the proposed dictionary, employing a non-uniform distance sampling approach, achieves lower column coherence than the benchmark and significantly improves the localization of UEs compared to uniform distance sampling.

eess.SP↗

arXiv2023

Foundations of User-Centric Cell-Free Massive MIMO

Imagine a coverage area where each mobile device is communicating with a preferred set of wireless access points (among many) that are selected based on its needs and cooperate to jointly serve it, instead of creating autonomous cells. This effectively leads to a user-centric post-cellular network architecture, which can resolve many of the interference issues and service-quality variations that appear in cellular networks. This concept is called User-centric Cell-free Massive MIMO (multiple-input multiple-output) and has its roots in the intersection between three technology components: Massive MIMO, coordinated multipoint processing, and ultra-dense networks. The main challenge is to achieve the benefits of cell-free operation in a practically feasible way, with computational complexity and fronthaul requirements that are scalable to enable massively large networks with many mobile devices. This monograph covers the foundations of User-centric Cell-free Massive MIMO, starting from the motivation and mathematical definition. It continues by describing the state-of-the-art signal processing algorithms for channel estimation, uplink data reception, and downlink data transmission with either centralized or distributed implementation. The achievable spectral efficiency is mathematically derived and evaluated numerically using a running example that exposes the impact of various system parameters and algorithmic choices. The fundamental tradeoffs between communication performance, computational complexity, and fronthaul signaling requirements are thoroughly analyzed. Finally, the basic algorithms for pilot assignment, dynamic cooperation cluster formation, and power optimization are provided, while open problems related to these and other resource allocation problems are reviewed. All the numerical examples can be reproduced using the accompanying Matlab code.

cs.IT↗

arXiv2023

Resource Efficient Over-the-Air Fronthaul Signaling for Uplink Cell-Free Massive MIMO Systems

We propose a novel resource efficient analog over-the-air (OTA) computation framework to address the demanding requirements of the uplink (UL) fronthaul between the access points (APs) and the central processing unit (CPU) in cell-free massive multiple-input multiple-output (MIMO) systems. We discuss the drawbacks of the wired and wireless fronthaul solutions, and show that our proposed mechanism is efficient and scalable as the number of APs increases. We present the transmit precoding and two-phase power assignment strategies at the APs to coherently combine the signals OTA in a spectrally efficient manner. We derive the statistics of the APs locally available signals which enable us to to obtain the analytical expressions for the Bayesian and classical estimators of the OTA combined signals. We empirically evaluate the normalized mean square error (NMSE), symbol error rate (SER), and the coded bit error rate (BER) of our developed solution and benchmark against the state-of-the-art wired fronthaul based system

cs.IT↗

arXiv2023

Dual-Polarized Reconfigurable Intelligent Surface Assisted Broad Beamforming

A reconfigurable intelligent surface (RIS) consists of a large number of low-cost elements that can control the propagation environment seen from a transmitter by intelligently applying phase shifts to impinging signals before reflection. This paper studies an RIS-assisted communication system where a transmitter wants to transmit a common signal to many users residing in a wide angular area. To cover this sector uniformly, the RIS needs to radiate a broad beam with a spatially flat array factor, instead of a narrow beam as normally considered. To achieve this, we propose to use a dual-polarized RIS consisting of elements with orthogonal polarizations and show that the RIS can produce a broad beam if the phase shift configuration vectors in the two polarizations form a so-called Golay complementary sequence pair. By utilizing their properties, we also present a method for constructing configuration for large RISs from smaller ones, while preserving the broad radiation pattern of the smaller RIS. The numerical results corroborate the mathematical analyses and highlight the greatly improved coverage properties.

eess.SP↗

arXiv2023

Energy Harvesting Maximization for Reconfigurable Intelligent Surfaces Using Amplitude Measurements

Energy harvesting can enable a reconfigurable intelligent surface (RIS) to self-sustain its operations without relying on external power sources. In this paper, we consider the problem of energy harvesting for RISs in the absence of coordination with the ambient RF source. We propose a series of sequential phase-alignment algorithms that maximize the received power based on only power measurements. We prove the convergence of the proposed algorithm to the optimal value for the noiseless scenario. However, for the noisy scenario, we propose a linear least squares estimator. We prove that within the class of linear estimators, the optimal set of measurement phases are equally-spaced phases. To evaluate the performance of the proposed method, we introduce a random phase update algorithm as a benchmark. Our simulation results show that the proposed algorithms outperform the random phase update method in terms of achieved power after convergence while requiring fewer measurements per phase update. Using simulations, we show that in a noiseless scenario with a discrete set of possible phase shifts for the RIS elements, the proposed method is sub-optimal, achieving a higher value than the random algorithm but not exactly the maximum feasible value that we obtained by exhaustive search.

eess.SP↗

arXiv2023

Soft Handover Procedures in mmWave Cell-Free Massive MIMO Networks

This paper considers a mmWave cell-free massive MIMO (multiple-input multiple-output) network composed of a large number of geographically distributed access points (APs) simultaneously serving multiple user equipments (UEs) via coherent joint transmission. We address UE mobility in the downlink (DL) with imperfect channel state information (CSI) and pilot training. Aiming at extending traditional handover concepts to the challenging AP-UE association strategies of cell-free networks, distributed algorithms for joint pilot assignment and cluster formation are proposed in a dynamic environment considering UE mobility. The algorithms provide a systematic procedure for initial access and update of the serving APs and assigned pilot sequence to each UE. The principal goal is to limit the necessary number of AP and pilot changes, while limiting computational complexity. We evaluate the performance, in terms of spectral efficiency (SE), with maximum ratio and regularized zero-forcing precoding. Results show that our proposed distributed algorithms effectively identify the essential AP-UE association refinements with orders-of-magnitude lower computational time compared to the state-of-the-art. It also provides a significantly lower average number of pilot changes compared to an ultra-dense network (UDN). Moreover, we develop an improved pilot assignment procedure that facilitates massive access to the network in highly loaded scenarios.

eess.SP↗

arXiv2023

Combating Inter-Operator Pilot Contamination in Reconfigurable Intelligent Surfaces Assisted Multi-Operator Networks

In this paper, we study a new kind of pilot contamination appearing in multi-operator reconfigurable intelligent surfaces (RIS) assisted networks, where multiple operators provide services to their respective served users. The operators use dedicated frequency bands, but each RIS inadvertently reflects the transmitted uplink signals of the user equipment devices in multiple bands. Consequently, the concurrent reflection of pilot signals during the channel estimation phase introduces a new inter-operator pilot contamination effect. We investigate the implications of this effect in systems with either deterministic or correlated Rayleigh fading channels, specifically focusing on its impact on channel estimation quality, signal equalization, and channel capacity. The numerical results demonstrate the substantial degradation in system performance caused by this phenomenon and highlight the pressing need to address inter-operator pilot contamination in multi-operator RIS deployments. To combat the negative effect of this new type of pilot contamination, we propose to use orthogonal RIS configurations during uplink pilot transmission, which can mitigate or eliminate the negative effect of inter-operator pilot contamination at the expense of some inter-operator information exchange and orchestration.

eess.SP↗