arXiv subjects

Emil Björnson

Publications and source records attributed to Emil Björnson.

At least 217 records · Page 12Linked to original sources

arXiv2021

Optimizing a Binary Intelligent Reflecting Surface for OFDM Communications under Mutual Coupling

An intelligent reflecting surface (IRS) can greatly improve the channel quality over a frequency-flat channel, if it is configured to reflect the incident signal as a beam towards the receiver. However, the fundamental limitations of the IRS technology become apparent over practical frequency-selective channels, where the same configuration must be used over the entire bandwidth. In this paper, we consider a wideband orthogonal frequency-division multiplexing (OFDM) system that is supported by a fairly realistic IRS setup with two unbalanced states per element and also mutual coupling. We describe the simulation setup considered in the IEEE Signal Processing Cup 2021, propose a low-complexity solution for channel estimation and IRS configuration, and evaluate it on that setup.

cs.IT↗

arXiv2021

Cell-Free Massive MIMO with Large-Scale Fading Decoding and Dynamic Cooperation Clustering

This paper considers the uplink of user-centric cell-free massive MIMO (multiple-input multiple-output) systems. We utilize the user-centric dynamic cooperation clustering (DCC) framework and derive the achievable spectral efficiency with two-layer decoding that is divided between the access points and the central processing unit (CPU). This decoding method is also known as large-scale fading decoding (LSFD). The fronthaul signaling load is analyzed and a nearly optimal second-layer decoding scheme at the CPU is proposed to reduce the fronthaul requirements compared to the optimal scheme. We also revisit the joint optimization of LSFD weights and uplink power control and show that the corresponding max-min fair optimization problem can be solved optimally via an efficient fixed-point algorithm. We provide simulations that bring new insights into the cell-free massive MIMO implementation.

cs.IT↗

arXiv2021

RIS-Assisted Massive MIMO with Multi-Specular Spatially Correlated Fading

Reconfigurable intelligent surfaces (RISs) have attracted great attention as a potential beyond 5G technology. These surfaces consist of many passive elements of metamaterials whose impedance can be controllable to change the phase, amplitude, or other characteristics of wireless signals impinging on them. Channel estimation is a critical task when it comes to the control of a large RIS when having a channel with a large number of multipath components. In this paper, we propose a novel channel estimation scheme that exploits spatial correlation characteristics at both the massive multiple-input multiple-output (MIMO) base station and the planar RISs, and other statistical characteristics of multi-specular fading in a mobile environment. Moreover, a novel heuristic for phase-shift selection at the RISs is developed, inspired by signal processing methods that are effective in conventional massive MIMO. Simulation results demonstrate that the proposed uplink RIS-aided framework improves the spectral efficiency of the cell-edge mobile users substantially in comparison to a conventional single-cell massive MIMO system.

cs.IT↗

arXiv2021

Learning to Perform Downlink Channel Estimation in Massive MIMO Systems

We study downlink (DL) channel estimation in a multi-cell Massive multiple-input multiple-output (MIMO) system operating in a time-division duplex. The users must know their effective channel gains to decode their received DL data signals. A common approach is to use the mean value as the estimate, motivated by channel hardening, but this is associated with a substantial performance loss in non-isotropic scattering environments. We propose two novel estimation methods. The first method is model-aided and utilizes asymptotic arguments to identify a connection between the effective channel gain and the average received power during a coherence block. The second one is a deep-learning-based approach that uses a neural network to identify a mapping between the available information and the effective channel gain. We compare the proposed methods against other benchmarks in terms of normalized mean-squared error and spectral efficiency (SE). The proposed methods provide substantial improvements, with the learning-based solution being the best of the considered estimators.

cs.IT↗

arXiv2021

Scalable Cell-Free Massive MIMO Systems: Impact of Hardware Impairments

Standard cell-free (CF) multiple-input-multiple-output (mMIMO) systems is a promising technology to cover the demands for higher data rates in fifth-generation (5G) networks and beyond. These systems assume a large number of distributed access points (APs) using joint coherent transmission to communicate with the users. However, CF mMIMO systems present an increasing computational complexity as the number of users increases. Scalable cell-free CF (SCF) systems have been proposed to face this challenge. Given that the cost-efficient deployment of such large networks requires low-cost transceivers, which are prone to unavoidable hardware imperfections, realistic evaluations of SCF mMIMO systems should take them into account before implementation. Hence, in this work, we focus on the impact of hardware impairments (HWIs) on the SCF mMIMO systems through a general model accounting for both additive and multiplicative impairments. Notably, there is no other work in the literature studying the impact of phase noise (PN) in the local oscillators (LOs) of CF mMIMO systems or in general the impact of any HWIs in SCF mMIMO systems. In particular, we derive upper and lower bounds on the uplink capacity accounting for HWIs. Moreover, we obtain the optimal hardware-aware (HA) partial minimum mean-squared error (PMMSE) combiner. Especially, the lower bound is derived in closed-form using the theory of deterministic equivalents (DEs). Among the interesting findings, we observe that separate LOs (SLOs) outperform a common LO (CLO), and the additive transmit distortion degrades more the performance than the additive receive distortion.

cs.IT↗

arXiv2021

Toward Autonomous Reconfigurable Intelligent Surfaces Through Wireless Energy Harvesting

In this work, we examine the potential of autonomous operation of a reconfigurable intelligent surface (RIS) using wireless energy harvesting from information signals. To this end, we first identify the main RIS power-consuming components and introduce a suitable power-consumption model. Subsequently, we introduce a novel RIS power-splitting architecture that enables simultaneous energy harvesting and beamsteering. Specifically, a subset of the RIS unit cells (UCs) is used for beamsteering while the remaining ones absorb energy. For the subset allocation, we propose policies obtained as solutions to two optimization problems. The first problem aims at maximizing the signal-to-noise ratio (SNR) at the receiver without violating the RIS's energy harvesting demands. Additionally, the objective of the second problem is to maximize the RIS harvested power, while ensuring an acceptable SNR at the receiver. We prove that under particular propagation conditions, some of the proposed policies deliver the optimal solution of the two problems. Furthermore, we report numerical results that reveal the efficiency of the policies with respect to the optimal and very high-complexity brute-force design approach. Finally, through a case study of user tracking, we showcase that the RIS power-consumption demands can be secured by harvesting energy from information signals.

cs.IT↗

arXiv2021

RIS-Aided Wireless Communications: Prototyping, Adaptive Beamforming, and Indoor/Outdoor Field Trials

The prospects of using a Reconfigurable Intelligent Surface (RIS) to aid wireless communication systems have recently received much attention from academia and industry. Most papers make theoretical studies based on elementary models, while the prototyping of RIS-aided wireless communication and real-world field trials are scarce. In this paper, we describe a new RIS prototype consisting of 1100 controllable elements working at 5.8 GHz band. We propose an efficient algorithm for configuring the RIS over the air by exploiting the geometrical array properties and a practical receiver-RIS feedback link. In our indoor test, where the transmitter and receiver are separated by a 30 cm thick concrete wall, our RIS prototype provides a 26 dB power gain compared to the baseline case where the RIS is replaced by a copper plate. A 27 dB power gain was observed in the short-distance outdoor measurement. We also carried out long-distance measurements and successfully transmitted a 32 Mbps data stream over 500 m. A 1080p video was live-streamed and it only played smoothly when the RIS was utilized. The power consumption of the RIS is around 1 W. Our paper is vivid proof that the RIS is a very promising technology for future wireless communications.

cs.IT↗

arXiv2021

Joint Analog Beam Selection and Digital Beamforming in Millimeter Wave Cell-Free Massive MIMO Systems

Cell-free massive MIMO systems consist of many distributed access points with simple components that jointly serve the users. In millimeter wave bands, only a limited set of predetermined beams can be supported. In a network that consolidates these technologies, downlink analog beam selection stands as a challenging task for the network sum-rate maximization. Low-cost digital filters can improve the network sum-rate further. In this work, we propose low-cost joint designs of analog beam selection and digital filters. The proposed joint designs achieve significantly higher sum-rates than the disjoint design benchmark. Supervised machine learning (ML) algorithms can efficiently approximate the input-output mapping functions of the beam selection decisions of the joint designs with low computational complexities. Since the training of ML algorithms is performed off-line, we propose a well-constructed joint design that combines multiple initializations, iterations, and selection features, as well as beam conflict control, i.e., the same beam cannot be used for multiple users. The numerical results indicate that ML algorithms can retain 99-100% of the original sum-rate results achieved by the proposed well-constructed designs.

cs.IT↗

arXiv2021

Pilot Assignment for Joint Uplink-Downlink Spectral Efficiency Enhancement in Massive MIMO Systems with Spatial Correlation

This paper proposes a flexible pilot assignment method to jointly optimize the uplink and downlink data transmission in multi-cell Massive multiple input multiple output (MIMO) systems with correlated Rayleigh fading channels. By utilizing a closed-form expression of the ergodic spectral efficiency (SE) achieved with maximum ratio processing, we formulate an optimization problem for maximizing the minimum weighted sum of the uplink and downlink SEs subject to the transmit powers and pilot assignment sets. This combinatiorial optimization problem is solved by two sequential algorithms: a heuristic pilot assignment is first proposed to obtain a good pilot reuse set and the data power control is then implemented. Numerical results manifest that the proposed algorithm converges fast to a better minimum sum SE per user than the algorithms in previous works.

cs.IT↗

arXiv2021

Configuring an Intelligent Reflecting Surface for Wireless Communications

The IEEE Signal Processing Society is proud to announce the eighth edition of the Signal Processing Cup: an exciting challenge to control a wireless propagation environment using an intelligent reflecting surface. An intelligent reflecting surface is a two-dimensional array of metamaterial whose interaction with electromagnetic waves can be controlled, e.g., by tuning the impedance variations over the surface. These surfaces might be used in the sixth generation (6G) mobile technology to direct wireless signals from a transmitter towards a receiver, to raise the communication performance. The goal of the challenge is to characterize the behavior of an intelligent reflecting surface based on received signals from an over-the-air signaling phase and develop a control algorithm to configure the surface to aid wireless communications.

eess.SP↗

arXiv2021

A Fair and Scalable Power Control Scheme in Multi-cell Massive MIMO

This paper studies the transmit power optimization in a multi-cell massive multiple-input multiple-output (MIMO) system. To overcome the scalability issue of network-wide max-min fairness (NW-MMF), we propose a novel power control (PC) scheme. This scheme maximizes the geometric mean (GM) of the per-cell max-min spectral efficiency (SE). To solve this new optimization problem, we prove that it can be rewritten in a convex form and then solved using standard tools. To provide a fair comparison with the available utility functions in the literature, we solve the network-wide proportional fairness (NW-PF) PC as well. The NW-PF focuses on maximizing the sum SE, thereby ignoring fairness, but gives some extra attention to the weakest users. The simulation results highlight the benefits of our model which is balancing between NW-PF and NW-MMF.

cs.IT↗

arXiv2021

An Algorithm for Grant-Free Random Access in Cell-Free Massive MIMO

Massive access is one of the main use cases of beyond 5G (B5G) wireless networks and massive MIMO is a key technology for supporting it. Prior works studied massive access in the co-located massive MIMO framework. In this paper, we investigate the activity detection in grant-free random access for massive machine type communications (mMTC) in cell-free massive MIMO network. Each active device transmits a pre-assigned non-orthogonal pilot sequence to the APs and the APs send the received signals to a central processing unit (CPU) for joint activity detection. We formulate the maximum likelihood device activity detection problem and provide an algorithm based on coordinate descent method having affordable complexity. We show that the cell-free massive MIMO network can support low-powered mMTC devices and provide a broad coverage.

cs.IT↗

arXiv2021

Enhanced Fairness and Scalability of Power Control Schemes in Multi-Cell Massive MIMO

This paper studies the transmit power optimization in multi-cell massive multiple-input multiple-output (MIMO) systems. Network-wide max-min fairness (NW-MMF) and network-wide proportional fairness (NW-PF) are two well-known power control schemes in the literature. The NW-MMF focus on maximizing the fairness among users at the cost of penalizing users with good channel conditions. On the other hand, the NW-PF focuses on maximizing the sum SE, thereby ignoring fairness, but gives some extra attention to the weakest users. However, both of these schemes suffer from a scalability issue which means that for large networks, it is highly probable that one user has a very poor channel condition, pushing the spectral efficiency (SE) of all users towards zero. To overcome the scalability issue of NW-MMF and NW-PF, we propose a novel power control scheme that is provably scalable. This scheme maximizes the geometric mean (GM) of the per-cell max-min SE. To solve this new optimization problem, we prove that it can be rewritten in a convex optimization form and then solved using standard tools. The simulation results highlight the benefits of our model which is balancing between NW-PF and NW-MMF.

cs.IT↗

arXiv2021

Autonomous Reconfigurable Intelligent Surfaces Through Wireless Energy Harvesting

In this paper, we examine the potential for a reconfigurable intelligent surface (RIS) to be powered by energy harvested from information signals. This feature might be key to reap the benefits of RIS technology's lower power consumption compared to active relays. We first identify the main RIS power-consuming components and then propose an energy harvesting and power consumption model. Furthermore, we formulate and solve the problem of the optimal RIS placement together with the amplitude and phase response adjustment of its elements in order to maximize the signal-to-noise ratio (SNR) while harvesting sufficient energy for its operation. Finally, numerical results validate the autonomous operation potential and reveal the range of power consumption values that enables it.

cs.IT↗

arXiv2021

Massive-MIMO Iterative Channel Estimation and Decoding (MICED) in the Uplink

Massive MIMO uses a large number of antennas to increase the spectral efficiency (SE) through spatial multiplexing of users, which requires accurate channel state information. It is often assumed that regular pilots (RP), where a fraction of the time-frequency resources is reserved for pilots, suffices to provide high SE. However, the SE is limited by the pilot overhead and pilot contamination. An alternative is superimposed pilots (SP) where all resources are used for pilots and data. This removes the pilot overhead and reduces pilot contamination by using longer pilots. However, SP suffers from data interference that reduces the SE gains. This paper proposes the Massive-MIMO Iterative Channel Estimation and Decoding (MICED) algorithm where partially decoded data is used as side-information to improve the channel estimation and increase SE. We show that users with precise data estimates can help users with poor data estimates to decode. Numerical results with QPSK modulation and LDPC codes show that the MICED algorithm increases the SE and reduces the block-error-rate with RP and SP compared to conventional methods. The MICED algorithm with SP delivers the highest SE and it is especially effective in scenarios with short coherence blocks like high mobility or high frequencies.

cs.IT↗

arXiv2021

Impact of Channel Aging on Cell-Free Massive MIMO Over Spatially Correlated Channels

In this paper, we investigate the impact of channel aging on the performance of cell-free (CF) massive multiple-input multiple-output (MIMO) systems with both spatial correlation and pilot contamination. We derive novel closed-form uplink and downlink spectral efficiency (SE) expressions that take imperfect channel estimation into account. More specifically, we consider large-scale fading decoding and matched-filter receiver cooperation in the uplink. The uplink performance of a small-cell (SC) system is derived for comparison. The CF massive MIMO system achieves higher 95\%-likely uplink SE than the SC system. In the downlink, the coherent transmission has four times higher 95\%-likely per-user SE than the non-coherent transmission. Statistical channel cooperation power control (SCCPC) is used to mitigate the inter-user interference. SCCPC performs better than full power transmission, but the benefits are gradually weakened as the channel aging becomes stronger. Furthermore, strong spatial correlation reduces the SE but degrades the effect of channel aging. Increasing the number of antennas can improve the SE while decreasing the energy efficiency. Finally, we use the maximum normalized Doppler shift to design the SE-improved length of the resource block. Simulation results are presented to validate the accuracy of our expressions and prove that the CF massive MIMO system is more robust to channel aging than the SC system.

cs.IT↗

arXiv2021

Optimal Per-Antenna ADC Bit Allocation in Correlated and Cell-Free Massive MIMO

In Massive MIMO base stations (BSs), the hardware design needs to balance high spectral efficiency (SE) with low complexity. The level of hardware impairments (HWIs) indicates how strong the signal distortion introduced by hardware imperfections is. In particular, the analog-to-digital converters (ADCs) have an important impact on signal distortion and power consumption. This article addresses the fundamental problem of selecting the optimal hardware quality in the Massive MIMO space. In particular, we examine the optimal HWI and ADC bit allocation per BS antenna to maximize the SE. The results show that in co-located arrays with low channel gain variations across antennas, equal ADC bit allocation is optimal. In contrast, cell-free Massive MIMO systems benefit the most from optimizing the ADC bit allocation achieving improvements in the order of 2 [bit-per-channel-use] per user equipment when using regularized zero-forcing (RZF). In addition, when including the impact of power consumption in cell-free Massive MIMO with RZF, allocating low values of mixed ADC bit resolutions across the BS antennas can increase the energy efficiency up to 30% compared to equal ADC bit allocation.

cs.IT↗

arXiv2021

Code-domain NOMA in Massive MIMO: When is it Needed?

In overloaded Massive MIMO (mMIMO) systems, wherein the number $K$ of user equipments (UEs) exceeds the number of base station antennas $M$, it has recently been shown that non-orthogonal multiple access (NOMA) can increase the sum spectral efficiency. This paper aims at identifying cases where code-domain NOMA can improve the spectral efficiency of mMIMO in the classical regime where $K < M$. Novel spectral efficiency expressions are provided for the uplink and downlink with arbitrary spreading signatures and spatial correlation matrices. Particular attention is devoted to the planar arrays that are currently being deployed in pre-5G and 5G networks (in sub$-6$ GHz bands), which are characterized by limited spatial resolution. Numerical results show that mMIMO with such planar arrays can benefit from NOMA in scenarios where the UEs are spatially close to each other. A two-step UE grouping scheme is proposed for NOMA-aided mMIMO systems that is applicable to the spatial correlation matrices of the UEs that are currently active in each cell. Numerical results are used to investigate the performance of the algorithm under different operating conditions and types of spreading signatures (orthogonal, sparse and random sets). The analysis reveals that orthogonal signatures provide the highest average spectral efficiency.

cs.IT↗