arXiv subjects

Emil Björnson

Publications and source records attributed to Emil Björnson.

At least 199 records · Page 11Linked to original sources

arXiv2022

Quantisation-aware Precoding for MU-MIMO with Limited-capacity Fronthaul

Base stations in 5G and beyond use advanced antenna systems (AASs), where multiple passive antenna elements and radio units are integrated into a single box. A critical bottleneck of such a system is the digital fronthaul between the AAS and baseband unit (BBU), which has limited capacity. In this paper, we study an AAS used for precoded downlink transmission over a multi-user multiple-input multiple-output (MU-MIMO) channel. First, we present the baseline quantization-unaware precoding scheme created when a precoder is computed at the BBU and then quantized to be sent over the fronthaul. We propose a new precoding design that is aware of the fronthaul quantization. We formulate an optimization problem to minimize the mean squared error at the receiver side. We rewrite the problem to utilize mixed-integer programming to solve it. The numerical results manifest that our proposed precoding greatly outperforms quantization-unaware precoding in terms of sum rate.

eess.SP↗

arXiv2022

Channel Modeling and Channel Estimation for Holographic Massive MIMO with Planar Arrays

In a realistic wireless environment, the multi-antenna channel usually exhibits spatially correlation fading. This is more emphasized when a large number of antennas is densely deployed, known as holographic massive MIMO (multiple-input multiple-output). In the first part of this letter, we develop a channel model for holographic massive MIMO by considering both non-isotropic scattering and directive antennas. With a large number of antennas, it is difficult to obtain full knowledge of the spatial correlation matrix. In this case, channel estimation is conventionally done using the least-squares (LS) estimator that requires no prior information of the channel statistics or array geometry. In the second part of this letter, we propose a novel channel estimation scheme that exploits the array geometry to identify a subspace of reduced rank that covers the eigenspace of any spatial correlation matrix. The proposed estimator outperforms the LS estimator, without using any user-specific channel statistics.

cs.IT↗

arXiv2021

MRT-based Joint Unicast and Multigroup Multicast Transmission in Massive MIMO Systems

We study joint unicast and multigroup multicast transmission in single-cell massive multiple-input-multiple-output (MIMO) systems, under maximum ratio transmission. For the unicast transmission, the objective is to maximize the weighted sum spectral efficiency (SE) of the unicast user terminals (UTs) and for the multicast transmission the objective is to maximize the minimum SE of the multicast UTs. These two problems are coupled to each other in a conflicting manner, due to their shared power resource and interference. To address this, we formulate a multiobjective optimization problem (MOOP). We derive the Pareto boundary of the MOOP analytically and determine the values of the system parameters to achieve any desired Pareto optimal point. Moreover, we prove that the Pareto region is convex, hence the system should serve the unicast and multicast UTs at the same time-frequency resource.

cs.IT↗

arXiv2021

Human and Machine Type Communications can Coexist in Uplink Massive MIMO Systems

Future cellular networks are expected to support new communication paradigms such as machine-type communication (MTC) services along with human-type communication (HTC) services. This requires base stations to serve a large number of devices in relatively short channel coherence intervals which renders allocation of orthogonal pilot sequence per-device approaches impractical. Furthermore, the stringent power constraints, place-and-play type connectivity and various data rate requirements of MTC devices make it impossible for the traditional cellular architecture to accommodate MTC and HTC services together. Massive multiple-input-multiple-output (MaMIMO) technology has the potential to allow the coexistence of HTC and MTC services, thanks to its inherent spatial multiplexing properties and low transmission power requirements. In this work, we investigate the performance of a single cell under a shared physical channel assumption for MTC and HTC services and propose a novel scheme for sharing the time-frequency resources. The analysis reveals that MaMIMO can significantly enhance the performance of such a setup and allow the inclusion of MTC services into the cellular networks without requiring additional resources.

cs.IT↗

arXiv2021

Centralized and Distributed Power Allocation for Max-Min Fairness in Cell-Free Massive MIMO

Cell-free Massive MIMO systems consist of a large number of geographically distributed access points (APs) that serve users by coherent joint transmission. Downlink power allocation is important in these systems, to determine which APs should transmit to which users and with what power. If the system is implemented correctly, it can deliver a more uniform user performance than conventional cellular networks. To this end, previous works have shown how to perform system-wide max-min fairness power allocation when using maximum ratio precoding. In this paper, we first generalize this method to arbitrary precoding, and then train a neural network to perform approximately the same power allocation but with reduced computational complexity. Finally, we train one neural network per AP to mimic system-wide max-min fairness power allocation, but using only local information. By learning the structure of the local propagation environment, this method outperforms the state-of-the-art distributed power allocation method from the Cell-free Massive MIMO literature.

cs.IT↗

arXiv2021

Reconfigurable Intelligent Surfaces: A Signal Processing Perspective With Wireless Applications

Antenna array technology enables directional transmission and reception of wireless signals, for communications, localization, and sensing purposes. The signal processing algorithms that underpin this technology began to be developed several decades ago [1], but it is first with the ongoing deployment of the fifth-generation (5G) wireless mobile networks that it becomes a mainstream technology [2]. The number of antenna elements in the arrays of the 5G base stations and user devices can be measured at the order of 100 and 10, respectively. As the networks shift towards using higher frequency bands, more antennas fit into a given aperture. The 5G developments enhance the transmitter and receiver functionalities, but the wireless channel propagation remains an uncontrollable system. This is illustrated in Fig. 1(a) and its mathematical notation will be introduced later. Transmitted signals with three different frequencies are shown to illustrate the fact that attenuation can vary greatly across frequencies. Looking beyond 5G, the advent of electromagnetic components that can shape how they interact with wireless signals enables partial control of the propagation. A reconfigurable intelligent surface (RIS) is a two-dimensional surface of engineered material whose properties are reconfigurable rather than static [4]. This article provides a tutorial on the fundamental properties of the RIS technology from a signal processing perspective. It is meant as a complement to recent surveys of electromagnetic and hardware aspects [4], [7], [11], acoustics [12], communication theory [13], and localization [8]. We will provide the formulas and derivations that are required to understand and analyze RIS-aided systems using signal processing, and exemplify how they can be utilized for improved communication, localization, and sensing.

eess.SP↗

arXiv2021

NOMA Versus Massive MIMO in Rayleigh Fading

This paper compares the sum rates and rate regions achieved by power-domain NOMA (non-orthogonal multiple access) and standard massive MIMO (multiple-input multiple-output) techniques. We prove analytically that massive MIMO always outperforms NOMA in i.i.d.~Rayleigh fading channels, if a sufficient number of antennas are used at the base stations. The simulation results show that the crossing point occurs already when having 20-30 antennas, which is far less than what is considered for the next generation cellular networks.

cs.IT↗

arXiv2021

Hardware Distortion Correlation Has Negligible Impact on UL Massive MIMO Spectral Efficiency

This paper analyzes how the distortion created by hardware impairments in a multiple-antenna base station affects the uplink spectral efficiency (SE), with focus on Massive MIMO. This distortion is correlated across the antennas, but has been often approximated as uncorrelated to facilitate (tractable) SE analysis. To determine when this approximation is accurate, basic properties of distortion correlation are first uncovered. Then, we separately analyze the distortion correlation caused by third-order non-linearities and by quantization. Finally, we study the SE numerically and show that the distortion correlation can be safely neglected in Massive MIMO when there are sufficiently many users. Under i.i.d. Rayleigh fading and equal signal-to-noise ratios (SNRs), this occurs for more than five transmitting users. Other channel models and SNR variations have only minor impact on the accuracy. We also demonstrate the importance of taking the distortion characteristics into account in the receive combining.

cs.IT↗

arXiv2021

Electromagnetic Interference in RIS-Aided Communications

The prospects of using a reconfigurable intelligent surface (RIS) to aid wireless communication systems have recently received much attention. Among the different use cases, the most popular one is where each element of the RIS scatters the incoming signal with a controllable phase-shift, without increasing its power. In prior literature, this setup has been analyzed by neglecting the electromagnetic interference, consisting of the inevitable incoming waves from external sources. In this letter, we provide a physically meaningful model for the electromagnetic interference that can be used as a baseline when evaluating RIS-aided communications. The model is used to show that electromagnetic interference has a non-negligible impact on communication performance, especially when the size of the RIS grows large. When the direct link is present (though with a relatively weak gain), the RIS can even reduce the communication performance. Importantly, it turns out that the SNR grows quadratically with the number of RIS elements only when the spatial correlation matrix of the electromagnetic interference is asymptotically orthogonal to that of the effective channel (including RIS phase-shifts) towards the intended receiver. Otherwise, the SNR only increases linearly.

eess.SP↗

arXiv2021

A Primer on Near-Field Beamforming for Arrays and Reconfigurable Intelligent Surfaces

Wireless communication systems have almost exclusively operated in the far-field of antennas and antenna arrays, which is conventionally characterized by having propagation distances beyond the Fraunhofer distance. This is natural since the Fraunhofer distance is normally only a few wavelengths. With the advent of active arrays and passive reconfigurable intelligent surfaces (RIS) that are physically large, it is plausible that the transmitter or receiver is located in between the Fraunhofer distance of the individual array/surface elements and the Fraunhofer distance of the entire array. An RIS then can be configured to reflect the incident waveform towards a point in the radiative near-field of the surface, resulting in a beam with finite depth, or as a conventional angular beam with infinity focus, which only results in amplification in the far-field. To understand when these different options are viable, an accurate characterization of the near-field behaviors is necessary. In this paper, we revisit the motivation and approximations behind the Fraunhofer distance and show that it is not the right metric for determining when near-field focusing is possible. We obtain the distance range where finite-depth beamforming is possible and the distance where the beamforming gain tapers off.

cs.IT↗

arXiv2021

Distributed Computation of A Posteriori Bit Likelihood Ratios in Cell-Free Massive MIMO

This paper presents a novel strategy to decentralize the soft detection procedure in an uplink cell-free massive multiple-input-multiple-output network. We propose efficient approaches to compute the a posteriori probability-per-bit, exactly or approximately when having a sequential fronthaul. More precisely, each access point (AP) in the network computes partial sufficient statistics locally, fuses it with received partial statistics from another AP, and then forwards the result to the next AP. Once the sufficient statistics reach the central processing unit, it performs the soft demodulation by computing the log-likelihood ratio (LLR) per bit, and then a channel decoding algorithm (e.g., a Turbo decoder) is utilized to decode the bits. We derive the distributed computation of LLR analytically.

cs.IT↗

arXiv2021

RadioWeaves for Extreme Spatial Multiplexing in Indoor Environments

With the advances in virtual and augmented reality, gaming applications, and entertainment, certain indoor scenarios will require vastly higher capacity than what can be delivered by 5G. In this paper, we focus on massive MIMO for indoor environments. We provide a case study of the distributed deployment of the antenna elements over the walls of a room and not restricting the antenna separation to be half the wavelength. This is a new paradigm of massive MIMO antenna deployment, introduced under the name RadioWeaves. We investigate different antenna deployment scenarios in line of sight communication. We observe that the RadioWeaves deployment can spatially separate users much better than a conventional co-located deployment, which outweighs the losses caused by grating lobes and thus saves a lot on transmit power. Through simulations, we show that the RadioWeaves technology can provide high rates to multiple users by spending very little power at the transmitter compared to a co-located deployment.

cs.IT↗

arXiv2021

Clustering-Based Activity Detection Algorithms for Grant-Free Random Access in Cell-Free Massive MIMO

Future wireless networks need to support massive machine type communication (mMTC) where a massive number of devices accesses the network and massive MIMO is a promising enabling technology. Massive access schemes have been studied for co-located massive MIMO arrays. In this paper, we investigate the activity detection in grant-free random access for mMTC in cell-free massive MIMO networks using distributed arrays. Each active device transmits a non-orthogonal pilot sequence to the access points (APs) and the APs send the received signals to a central processing unit (CPU) for joint activity detection. The maximum likelihood device activity detection problem is formulated and algorithms for activity detection in cell-free massive MIMO are provided to solve it. The simulation results show that the macro-diversity gain provided by the cell-free architecture improves the activity detection performance compared to co-located architecture when the coverage area is large.

cs.IT↗

arXiv2021

Model-based and Data-driven Approaches for Downlink Massive MIMO Channel Estimation

We study downlink channel estimation in a multi-cell Massive multiple-input multiple-output (MIMO) system operating in time-division duplex. The users must know their effective channel gains to decode their received downlink data. Previous works have used the mean value as the estimate, motivated by channel hardening. However, this is associated with a performance loss in non-isotropic scattering environments. We propose two novel estimation methods that can be applied without downlink pilots. The first method is model-based and asymptotic arguments are utilized to identify a connection between the effective channel gain and the average received power during a coherence interval. The second method is data-driven and trains a neural network to identify a mapping between the available information and the effective channel gain. Both methods can be utilized for any channel distribution and precoding. For the model-aided method, we derive all expressions in closed form for the case when maximum ratio or zero-forcing precoding is used. We compare the proposed methods with the state-of-the-art using the normalized mean-squared error and spectral efficiency (SE). The results suggest that the two proposed methods provide better SE than the state-of-the-art when there is a low level of channel hardening, while the performance difference is relatively small with the uncorrelated channel model.

cs.IT↗

arXiv2021

Team MMSE Precoding with Applications to Cell-free Massive MIMO

This article studies a novel distributed precoding design, coined team minimum mean-square error (TMMSE) precoding, which rigorously generalizes classical centralized MMSE precoding to distributed operations based on transmitter-specific channel state information (CSIT). Building on the so-called theory of teams, we derive a set of necessary and sufficient conditions for optimal TMMSE precoding, in the form of an infinite dimensional linear system of equations. These optimality conditions are further specialized to cell-free massive MIMO networks, and explicitly solved for two important examples, i.e., the classical case of local CSIT and the case of unidirectional CSIT sharing along a serial fronthaul. The latter case is relevant, e.g., for the recently proposed radio stripe concept and the related advances on sequential processing exploiting serial connections. In both cases, our optimal design outperforms the heuristic methods that are known from the previous literature. Duality arguments and numerical simulations validate the effectiveness of the proposed team theoretical approach in terms of ergodic achievable rates under a sum-power constraint.

cs.IT↗

arXiv2021

Uplink Performance of Cell-Free Massive MIMO Over Spatially Correlated Rician Fading Channels

We consider a practical cell-free massive multiple-input-multiple-output (MIMO) system with multi-antenna access points (APs) and spatially correlated Rician fading channels. The significant phase-shift of the line-of-sight component induced by the user equipment movement is modeled randomly. Furthermore, we investigate the uplink spectral efficiency (SE) with maximum ratio (MR)/local minimum mean squared error (L-MMSE) combining and optimal large-scale fading decoding based on the phase-aware MMSE, phase-aware element-wise MMSE and linear MMSE (LMMSE) estimators. Then new closed-form SE expressions with MR combining are derived. Numerical results validate our derived expressions and show that the SE benefits from the spatial correlation. It is important to observe that the performance gap between L-MMSE and MR combining increases with the number of antennas per AP and the SE of the LMMSE estimator is lower than that of other estimators due to the lack of phase-shifts knowledge.

cs.IT↗

arXiv2021

A Survey on User-Centric Cell-Free Massive MIMO Systems

The mobile data traffic has been exponentially growing during the last decades, which has been enabled by the densification of the network infrastructure in terms of increased cell density (i.e., ultra-dense network (UDN)) and/or increased number of active antennas per access point (AP) (i.e., massive multiple-input multiple-output (mMIMO)). However, neither UDN nor mMIMO will meet the increasing data rate demands of the sixth generation (6G) wireless communications due to the inter-cell interference and large quality-of-service variations, respectively. Cell-free (CF) mMIMO, which combines the best aspects of UDN and mMIMO, is viewed as a key solution to this issue. In such systems, each user equipment (UE) is served by a preferred set of surrounding APs cooperatively. In this paper, we provide a survey of the state-of-the-art literature on CF mMIMO. As a starting point, the significance and the basic properties of CF mMIMO are highlighted. We then present the canonical framework, where the essential details (i.e., transmission procedure and mathematical system model) are discussed. Next, we provide a deep look at the resource allocation and signal processing problems related to CF mMIMO and survey the up-to-date schemes and algorithms. After that, we discuss the practical issues when implementing CF mMIMO. Potential future directions are then pointed out. Finally, we conclude this paper with a summary of the key lessons learned in this field. This paper aims to provide a starting point for anyone who wants to conduct research on CF mMIMO for future wireless networks.

cs.IT↗

arXiv2021

MmWave MIMO Communication with Semi-Passive RIS: A Low-Complexity Channel Estimation Scheme

Reconfigurable intelligent surfaces (RISs) have recently received widespread attention in the field of wireless communication. An RIS can be controlled to reflect incident waves from the transmitter towards the receiver; a feature that is believed to fundamentally contribute to beyond 5G wireless technology. The typical RIS consists of entirely passive elements, which requires the high-dimensional channel estimation to be done elsewhere. Therefore, in this paper, we present a semi-passive large-scale RIS architecture equipped with only a small fraction of simplified receiver units with only 1-bit quantization. Based on this architecture, we first propose an alternating direction method of multipliers (ADMM)-based approach to recover the training signals at the passive RIS elements, We then obtain the global channel by combining a channel sparsification step with the generalized approximate message passing (GAMP) algorithm. Our proposed scheme exploits both the sparsity and low-rankness properties of the channel in the joint spatial-frequency domain of a wideband mmWave multiple-input-multiple-output (MIMO) communication system. Simulation results show that the proposed algorithm can significantly reduce the pilot signaling needed for accurate channel estimation and outperform previous methods, even with fewer receiver units.

cs.IT↗