arXiv subjects

Eduardo Prieto-Araujo

Publications and source records attributed to Eduardo Prieto-Araujo.

46 records · Page 3Linked to original sources

arXiv2022

Augmentation of Generalized Multivariable Grid-Forming Control for Power Converters with Cascaded Controllers

The classic design of grid-forming control strategies for power converters rely on the stringent assumption of the timescale separation between DC and AC states and their corresponding control loops, e.g., AC and DC loops, power and cascaded voltage and current loops, etc. This paper proposes a multi-input multi-output based grid-forming (MIMO-GFM) control for the power converters using a multivariable feedback structure. First, the MIMO-GFM control couples the AC and DC loops by a general multivariable control transfer matrix. Then, the parameters design is transformed into a standard fixed-structure H-infinity synthesis. By this way, all the loops can be tuned simultaneously and optimally without relying on the assumptions of loop decoupling. Therefore, a superior and robust performance can be achieved. Experimental results verify the proposed method.

eess.SY↗

arXiv2021

Modelling and Simulation of Power Systems with Grid-Connected Converters in OpenModelica

This paper analyses the capabilities of the OpenModelica environment to perform electromagnetic transient (EMT) type simulations of power transmission systems with grid-connected converters. A power transmission system has been modelled and simulated in OpenModelica and Simulink to compare both tools in terms of accuracy, robustness, flexibility and computational performance. Power system transient studies such as faults and switching of capacitor banks have been performed. The results confirmed an excellent overall agreement between both software and demonstrated a remarkable potential for using OpenModelica for EMT-type modelling and simulation of future power electronic dominated grids.

eess.SY↗

arXiv2021

Modelling Approaches of Power Systems Considering Grid-Connected Converters and Renewable Generation Dynamics

This paper presents a comparative analysis of several modelling approaches of key elements used in simulations of power systems with renewable energy sources. Different models of synchronous generators, transmission lines, converters, wind generators and photovoltaic (PV) power plants are compared to assess the most suitable models for grid-connection studies. It also analyses how the dynamics of PV power plants and the mechanical dynamics of wind generators affect the electrical variables on the grid side. The models were compared in terms of precision and computational time through simulations of load connection, short-circuits, disconnection of generators and lines in a benchmark system modelled in Simulink.

eess.SY↗

arXiv2021

Definition of scenarios for modern power systems with a high renewable energy share

Recent environmental policies have led many academic, industrial and governmental stakeholders to design and plan scenarios with very high share of renewable energy sources (RES). New system elements such as High-voltage Direct Current (HVDC) transmission, Microgrids, Virtual Power Plants (VPP) and Dynamic Virtual Power Plants (DVPP) are being increasingly studied with respect to their contribution to integrate future RES plants in the main grid. Several future scenarios are being analysed for each system and region, to ensure that the future energy systems, composed mostly of RES, can remain stable, match the demand during the seasonal variations across the year and are economically feasible. In this article, different types of energy scenarios are considered to obtain a range of options in terms of size, renewable generation technologies, and electrical network configuration. The scenarios were studied in the context of the POSYTYF project and were quantified through an optimization-based algorithm, using specific locations in Europe, and real data related to the availability of different RES, as well as the demand. It has been shown that photovoltaic (PV) and wind generation can provide the renewable backbone but they lack the flexibility needed to achieve a very high share in the energy mix. Other technologies, such as solar thermal and pumped hydro, become important to cover the last range of integration, as they provide a high flexibility, which is crucial for high share.

eess.SY↗

arXiv2021

Stability Assessment for Multi-Infeed Grid-Connected VSCs Modeled in the Admittance Matrix Form

The increasing use of power electronics converters to integrate renewable energy sources has been subject of concern due to the resonance oscillatory phenomena caused by their interaction with poorly damped AC networks. Early studies are focused to assess the controller influence of a single converter connected to simple networks, and they are no longer representative for existing systems. Lately, studies of multi-infeed grid-connected converters are of particular interest, and their main aim is to apply traditional criteria and identify their difficulties in the stability assessment. An extension of traditional criteria is commonly proposed as a result of these analysis, but they can be burdensome for large and complex power systems. The present work addresses this issue by proposing a simple criterion to assess the stability of large power systems with high-penetration of power converters. The criterion has its origin in the mode analysis and positive-net damping stability criteria, and it addresses the stability in the frequency domain by studying the eigenvalues magnitude and real component of dynamic models in the admittance matrix form. Its effectiveness is tested in two case studies developed in Matlab/Simulink which compare it with traditionally criteria, proving its simplicity.

eess.SY↗

arXiv2021

System-Level Performance and Robustness of the Grid-Forming Hybrid Angle Control

This paper investigates the implementation and application of the multi-variable grid-forming hybrid angle control (HAC) for high-power converters in transmission grids. We explore the system-level performance and robustness of the HAC concept in contrast to other grid-forming schemes i.e., power-frequency droop and matching controls. Our findings suggest that similar to the ac-based droop control, \ac{hac} enhances the small-signal frequency stability in low-inertia power grids, and akin to the dc-based matching control, HAC exhibits robustness when accounting for the practical limits of the converter systems. Thus, HAC combines the aforementioned complementary advantages. Furthermore, we show how retuning certain control parameters of the grid-forming controls improve the frequency performance. Last, as separate contributions, we introduce an alternative control augmentation that enhances the robustness and provides theoretical guidelines on extending the stability certificates of \ac{hac} to multi-converter systems.

math.OC↗

arXiv2021

Generalized Multivariable Grid-Forming Control Design for Power Converters

The grid-forming converter is an important unit in the future power system with more inverter-interfaced generators. However, improving its performance is still a key challenge. This paper proposes a generalized architecture of the grid-forming converter from the view of multivariable feedback control. As a result, many of the existing popular control strategies, i.e., droop control, power synchronization control, virtual synchronous generator control, matching control, dispatchable virtual oscillator control, and their improved forms are unified into a multivariable feedback control transfer matrix working on several linear and nonlinear error signals. Meanwhile, unlike the traditional assumptions of decoupling between AC and DC control, active power and reactive power control, the proposed configuration simultaneously takes all of them into consideration, which therefore can provide better performance. As an example, a new multi-input-multi-output-based grid-forming (MIMO-GFM) control is proposed based on the generalized configuration. To cope with the multivariable feedback, an optimal and structured $H_{\infty}$ synthesis is used to design the control parameters. At last, simulation and experimental results show superior performance and robustness of the proposed configuration and control.

eess.SY↗

arXiv2021

Analytic estimation of the MMC sub-module capacitor voltage ripple for balanced and unbalanced AC grid conditions

In this paper, a mathematical expression to define the maximum and minimum voltage ripples of the modular multilevel converter (MMC) sub-module (SM) capacitors is proposed. Using the arm averaged model of the MMC, the instantaneous power for the upper and lower arms of the converter is obtained, giving the basis to describe the instantaneous energy of the arms. To calculate the SM capacitors peak voltage values, it is required to obtain an analytic expression for the maximum and minimum energy levels. Due to the presence of terms with different magnitudes, frequencies and phases, finding it can be quite challenging. To overcome this issue, the instantaneous arm energy expression is modified using mathematical assumptions in order to join the different components into a single term which can analytically describes the maximum energy point. Then, this expression is used to calculate the peak values of the arm capacitor voltages. By employing the same principles from the arm level, the final analytical expression for the SM capacitors maximum and minimum voltages is found. Simulation results are carried out in order to validate the accuracy of the proposed analysis for different power delivery conditions.

eess.SY↗

arXiv2021

Data-driven Small-signal Modeling for Converter-based Power Systems

This article details a complete procedure to derive a data-driven small-signal-based model useful to perform converter-based power system related studies. To compute the model, Decision Tree (DT) regression, both using single DT and ensemble DT, and Spline regression have been employed and their performances have been compared, in terms of accuracy, training and computing time. The methodology includes a comprehensive step-by-step procedure to develop the model: data generation by conventional simulation and mathematical models, databases (DBs) arrangement, regression training and testing, realizing prediction for new instances. The methodology has been developed using an essential network and then tested on a more complex system, to show the validity and usefulness of the suggested approach. Both power systems test cases have the essential characteristics of converter-based power systems, simulating high penetration of converter interfaced generation and the presence of HVDC links. Moreover, it is proposed how to represent in a visual manner the results of the small-signal stability analysis for a wide range of system operating conditions, exploiting DT regressions. Finally, the possible applications of the model are discussed, highlighting the potential of the developed model in further power system small-signal related studies.

eess.SY↗

arXiv2021

Improved current reference calculation for MMCs interal energy balancing control

The paper addresses an improved inner current reference calculation to be employed in the control of modular multilevel converters operating during either balanced or unbalanced conditions. The suggested reference calculation is derived based on the AC and DC additive and differential voltage components applied to the upper and lower arms of the converter. In addition, the impacts caused not only by the AC network's impedances but also by the MMC's arm impedances are also considered during the derivation of the AC additive current reference expressions. Another issue discussed in this article regards that singular voltage conditions, where the positive-sequence component is equal to the negative one, may occur not only in the AC network but also internally (within the converter's applied voltages). Several different inner current reference calculation methods are compared and their applicability during the former fault conditions is analyzed. The paper presents a detailed formulation of the inner current reference calculation and applies it to different unbalanced AC grid faults where it is shown that the presented approach can be potentially used to maintain the internal energy of the converter balanced during normal and fault conditions.

eess.SY↗