arXiv subjects
Publications and source records attributed to Dong Liu.
In this paper, all symmetric super-biderivations of some Lie superalgebras are determined. As an application, commutative post-Lie superalgebra structures on these Lie superalgebras are also obtained.
Anomalous diffusions are ubiquitous in nature, whose functional distributions are governed by the backward Feynman-Kac equation. In this paper, the local discontinuous Galerkin (LDG) method is used to solve the 2D backward Feynman-Kac equation in a rectangular domain. The spatial semi-discrete LDG scheme of the equivalent form (obtained by Laplace transform) of the original equation is established. After discussing the properties of the fractional substantial calculus, the stability and optimal convergence rates $O(h^{k+1})$ of the semi-discrete scheme are proved by choosing an appropriate generalized numerical flux. The $L1$ scheme on the graded meshes is used to deal with the weak singularity of the solution near the initial time. Based on the theoretical results of a semi-discrete scheme, we investigate the stability and convergence of the fully discrete scheme, which shows the optimal convergence rates $O(h^{k+1}+τ^{\min\{2-α,γδ\}})$. Numerical experiments are carried out to show the efficiency and accuracy of the proposed scheme. In addition, we also verify the effect of the central numerical flux on the convergence rates and the condition number of the coefficient matrix.
Low-light images captured in the real world are inevitably corrupted by sensor noise. Such noise is spatially variant and highly dependent on the underlying pixel intensity, deviating from the oversimplified assumptions in conventional denoising. Existing light enhancement methods either overlook the important impact of real-world noise during enhancement, or treat noise removal as a separate pre- or post-processing step. We present \underline{C}oordinated \underline{E}nhancement for \underline{R}eal-world \underline{L}ow-light Noisy Images (CERL), that seamlessly integrates light enhancement and noise suppression parts into a unified and physics-grounded optimization framework. For the real low-light noise removal part, we customize a self-supervised denoising model that can easily be adapted without referring to clean ground-truth images. For the light enhancement part, we also improve the design of a state-of-the-art backbone. The two parts are then joint formulated into one principled plug-and-play optimization. Our approach is compared against state-of-the-art low-light enhancement methods both qualitatively and quantitatively. Besides standard benchmarks, we further collect and test on a new realistic low-light mobile photography dataset (RLMP), whose mobile-captured photos display heavier realistic noise than those taken by high-quality cameras. CERL consistently produces the most visually pleasing and artifact-free results across all experiments. Our RLMP dataset and codes are available at: https://github.com/VITA-Group/CERL.
With the $Ω$-operators for the Virasoro algebra \cite{BF} and the super Virasoro algebra in \cite{CL, CLL}, we get the $Ω$-operators for the Ovsienko-Roger superalgebras in this paper and then use it to classify all simple cuspidal modules for the $\bZ$-graded and $\frac12\bZ$-graded Ovsienko-Roger superalgebras. By this result, we can easily classify all simple Harish-Chandra modules over some related Lie superalgebras, including the $N=1$ BMS$_3$ algebra, the super $W(2,2)$, etc.
Space-time memory (STM) based video object segmentation (VOS) networks usually keep increasing memory bank every several frames, which shows excellent performance. However, 1) the hardware cannot withstand the ever-increasing memory requirements as the video length increases. 2) Storing lots of information inevitably introduces lots of noise, which is not conducive to reading the most important information from the memory bank. In this paper, we propose a Recurrent Dynamic Embedding (RDE) to build a memory bank of constant size. Specifically, we explicitly generate and update RDE by the proposed Spatio-temporal Aggregation Module (SAM), which exploits the cue of historical information. To avoid error accumulation owing to the recurrent usage of SAM, we propose an unbiased guidance loss during the training stage, which makes SAM more robust in long videos. Moreover, the predicted masks in the memory bank are inaccurate due to the inaccurate network inference, which affects the segmentation of the query frame. To address this problem, we design a novel self-correction strategy so that the network can repair the embeddings of masks with different qualities in the memory bank. Extensive experiments show our method achieves the best tradeoff between performance and speed. Code is available at https://github.com/Limingxing00/RDE-VOS-CVPR2022.
Two-dimensional (2D) materials possess great potential for flexible devices, ascribing to their outstanding electrical, optical, and mechanical properties. However, their mechanical deformation property and fracture mechanism, which are inescapable in many applications like flexible optoelectronics, are still unclear or not thoroughly investigated due methodology limitations. In light of this, such mechanical properties and mechanisms are explored on example of gallium telluride (GaTe), a promising optoelectronic candidate with an ultrahigh photo-responsibility and a high plasticity within 2D family. Considering the driving force insufficient in atomic force microscopy (AFM)-based nanoindentation method, here the mechanical properties of both substrate-supported and suspended GaTe multilayers were systematically investigated through full-scale Berkovich-tip nanoindentation, micro-Raman spectroscopy, AFM, and scanning electron microscopy. An unusual concurrence of multiple pop-in and load-drop events in loading curve was observed. By further correlating to molecular dynamics calculations, this concurrence was unveiled originating from the interlayer sliding mediated layers-by-layers fracture mechanism within GaTe multilayers. The van der Waals force between GaTe multilayers and substrates was revealed much stronger than that between GaTe interlayers, resulting in the easy sliding and fracture of multilayers within GaTe. This work provides new insights into the deformation and fracture mechanisms of GaTe and other similar 2D multilayers in flexible applications.
Medium- and high-entropy alloys based on the CrCoNi-system have been shown to display outstanding strength, tensile ductility and fracture toughness (damage-tolerance properties), especially at cryogenic temperatures. Here we examine the JIc and (back-calculated) KJIc fracture toughness values of the face-centered cubic, equiatomic CrCoNi and CrMnFeCoNi alloys at 20 K. At flow stress values of ~1.5 GPa, crack-initiation KJIc toughnesses were found to be exceptionally high, respectively 235 and 415 MPa(square-root)m for CrMnFeCoNi and CrCoNi, with the latter displaying a crack-growth toughness Kss exceeding 540 MPa(square-root)m after 2.25 mm of stable cracking, which to our knowledge is the highest such value ever reported. Characterization of the crack-tip regions in CrCoNi by scanning electron and transmission electron microscopy reveal deformation structures at 20 K that are quite distinct from those at higher temperatures and involve heterogeneous nucleation, but restricted growth, of stacking faults and fine nano-twins, together with transformation to the hexagonal closed-packed phase. The coherent interfaces of these features can promote both the arrest and transmission of dislocations to generate respectively strength and ductility which strongly contributes to sustained strain hardening. Indeed, we believe that these nominally single-phase, concentrated solid-solution alloys develop their fracture resistance through a progressive synergy of deformation mechanisms, including dislocation glide, stacking-fault formation, nano-twinning and eventually in situ phase transformation, all of which serve to extend continuous strain hardening which simultaneously elevates strength and ductility (by delaying plastic instability), leading to truly exceptional resistance to fracture.
How to efficiently utilize the temporal features is crucial, yet challenging, for video restoration. The temporal features usually contain various noisy and uncorrelated information, and they may interfere with the restoration of the current frame. This paper proposes learning noise-robust feature representations to help video restoration. We are inspired by that the neural codec is a natural denoiser. In neural codec, the noisy and uncorrelated contents which are hard to predict but cost lots of bits are more inclined to be discarded for bitrate saving. Therefore, we design a neural compression module to filter the noise and keep the most useful information in features for video restoration. To achieve robustness to noise, our compression module adopts a spatial channel-wise quantization mechanism to adaptively determine the quantization step size for each position in the latent. Experiments show that our method can significantly boost the performance on video denoising, where we obtain 0.13 dB improvement over BasicVSR++ with only 0.23x FLOPs. Meanwhile, our method also obtains SOTA results on video deraining and dehazing.
This paper proposes a nonlinear weighted anisotropic total variation (NWATV) regularization technique for electrical impedance tomography (EIT). The key idea is to incorporate the internal inhomogeneity information (e.g., edges of the detected objects) into the EIT reconstruction process, aiming to preserve the conductivity profiles (to be detected). We study the NWATV image reconstruction by employing a novel soft thresholding based reformulation included in the alternating direction method of multipliers (ADMM). To evaluate the proposed approach, 2D and 3D numerical experiments and human EIT lung imaging are carried out. It is demonstrated that the properties of the internal inhomogeneity are well preserved and improved with the proposed regularization approach, in comparison to traditional total variation (TV) and recently proposed fidelity embedded regularization approaches. Owing to the simplicity of the proposed method, the computational cost is significantly decreased compared with the well established primal-dual algorithm. Meanwhile, it was found that the proposed regularization method is quite robust to the measurement noise, which is one of the main uncertainties in EIT.
Geometry-based point cloud compression (G-PCC) can achieve remarkable compression efficiency for point clouds. However, it still leads to serious attribute compression artifacts, especially under low bitrate scenarios. In this paper, we propose a Multi-Scale Graph Attention Network (MS-GAT) to remove the artifacts of point cloud attributes compressed by G-PCC. We first construct a graph based on point cloud geometry coordinates and then use the Chebyshev graph convolutions to extract features of point cloud attributes. Considering that one point may be correlated with points both near and far away from it, we propose a multi-scale scheme to capture the short- and long-range correlations between the current point and its neighboring and distant points. To address the problem that various points may have different degrees of artifacts caused by adaptive quantization, we introduce the quantization step per point as an extra input to the proposed network. We also incorporate a weighted graph attentional layer into the network to pay special attention to the points with more attribute artifacts. To the best of our knowledge, this is the first attribute artifacts removal method for G-PCC. We validate the effectiveness of our method over various point clouds. Objective comparison results show that our proposed method achieves an average of 9.74% BD-rate reduction compared with Predlift and 10.13% BD-rate reduction compared with RAHT. Subjective comparison results present that visual artifacts such as color shifting, blurring, and quantization noise are reduced.
Photonic integrated microcombs have enabled advanced applications in optical communication, microwave synthesis, and optical metrology, which in nature unveil an optical dissipative soliton pattern under cavity-enhanced nonlinear processes. The most decisive factor of microcombs lies in the photonic material platforms, where materials with high nonlinearity and in capacity of high-quality chip integration are highly demanded. In this work, we present a home-developed chalcogenide glasses-Ge25Sb10S65 (GeSbS) for the nonlinear photonic integration and for the dissipative soliton microcomb generation. Compared with the current integrated nonlinear platforms, the GeSbS features wider transparency from the visible to 11 um region, stronger nonlinearity, and lower thermo-refractive coefficient, and is CMOS compatible in fabrication. In this platform, we achieve chip-integrated optical microresonators with a quality (Q) factor above 2 x 10^6, and carry out lithographically controlled dispersion engineering. In particular, we demonstrate that both a bright soliton-based microcomb and a dark-pulsed comb are generated in a single microresonator, in its separated fundamental polarized mode families under different dispersion regimes. The overall pumping power is on the ten-milliwatt level, determined by both the high Q-factor and the high material nonlinearity of the microresonator. Our results may contribute to the field of nonlinear photonics with an alternative material platform for highly compact and high-intensity nonlinear interactions, while on the application aspect, contribute to the development of soliton microcombs at low operation power, which is potentially required for monolithically integrated optical frequency combs.
Accurate retinal vessel segmentation is challenging because of the complex texture of retinal vessels and low imaging contrast. Previous methods generally refine segmentation results by cascading multiple deep networks, which are time-consuming and inefficient. In this paper, we propose two novel methods to address these challenges. First, we devise a light-weight module, named multi-scale residual similarity gathering (MRSG), to generate pixel-wise adaptive filters (PA-Filters). Different from cascading multiple deep networks, only one PA-Filter layer can improve the segmentation results. Second, we introduce a response cue erasing (RCE) strategy to enhance the segmentation accuracy. Experimental results on the DRIVE, CHASE_DB1, and STARE datasets demonstrate that our proposed method outperforms state-of-the-art methods while maintaining a compact structure. Code is available at https://github.com/Limingxing00/Retinal-Vessel-Segmentation-ISBI20222.
Motion, as the most distinct phenomenon in a video to involve the changes over time, has been unique and critical to the development of video representation learning. In this paper, we ask the question: how important is the motion particularly for self-supervised video representation learning. To this end, we compose a duet of exploiting the motion for data augmentation and feature learning in the regime of contrastive learning. Specifically, we present a Motion-focused Contrastive Learning (MCL) method that regards such duet as the foundation. On one hand, MCL capitalizes on optical flow of each frame in a video to temporally and spatially sample the tubelets (i.e., sequences of associated frame patches across time) as data augmentations. On the other hand, MCL further aligns gradient maps of the convolutional layers to optical flow maps from spatial, temporal and spatio-temporal perspectives, in order to ground motion information in feature learning. Extensive experiments conducted on R(2+1)D backbone demonstrate the effectiveness of our MCL. On UCF101, the linear classifier trained on the representations learnt by MCL achieves 81.91% top-1 accuracy, outperforming ImageNet supervised pre-training by 6.78%. On Kinetics-400, MCL achieves 66.62% top-1 accuracy under the linear protocol. Code is available at https://github.com/YihengZhang-CV/MCL-Motion-Focused-Contrastive-Learning.
Platelets corrugated horn is a promising technology for their scalability to a large corrugated horn array. In this paper, we present the design, fabrication, measurement and uncertainty analysis of a wideband 170-320 GHz platelet corrugated horn that features with low sidelobe across the band (<-30 dB). We also propose an accurate and universal method to analyze the axial misalignment of the platelets for the first time. It is based on the mode matching (MM) method with a closed-form solution to off-axis circular waveguide discontinuities obtained by using Graf addition theorem for the Bessel functions. The uncertainties introduced in the fabrication have been quantitatively analyzed using the Monte Carlo method. The analysis shows the cross-polarization of the corrugated horn degrades significantly with the axial misalignment. It well explains the discrepancy between the designed and the measured cross-polarization of platelets corrugated horn fabricated in THz band. The method can be used to determine the fabrication tolerance needed for other THz corrugated horns and evaluate the impact of the corrugated horn for astronomical observations.
A highly efficient on-chip acousto-optic modulator, as a key component, occupies an exceptional position in microwave-to-optical conversion. Homogeneous thin-film lithium niobate is preferentially employed to build the suspended configuration forming the acoustic resonant cavity to improve the modulation efficiency of the device. However, the limited cavity length and complex fabrication recipe of the suspended prototype restrain further breakthrough in the modulation efficiency and impose challenges for waveguide fabrication. In this work, based on a nonsuspended thin-film lithium niobate-chalcogenide glass hybrid Mach-Zehnder interferometer waveguide platform, we propose and demonstrate a built-in push-pull acousto-optic modulator with a half-wave-voltage-length product as low as 0.03 V cm, presenting a modulation efficiency comparable to that of the state-of-the-art suspended counterpart. Based on the advantage of low power consumption, a microwave modulation link is demonstrated using our developed built-in push-pull acousto-optic modulator. The nontrivial acousto-optic modulation performance benefits from the superior photoelastic property of the chalcogenide membrane and the completely bidirectional participation of the antisymmetric Rayleigh surface acoustic wave mode excited by the impedance-matched interdigital transducer, overcoming the issue of amplitude differences of surface acoustic waves applied to the Mach-Zehnder interferometer two arms in traditional push-pull acousto-optic modulators.
Spin-orbit coupling is an essential mechanism underlying quantum phenomena such as the spin Hall effect and topological insulators. It has been widely studied in well-isolated Hermitian systems, but much less is known about the role dissipation plays in spin-orbit-coupled systems. Here, we implement dissipative spin-orbit-coupled bands filled with ultracold fermions, and observe parity-time symmetry breaking as a result of the competition between the spin-orbit coupling and dissipation. Tunable dissipation, introduced by state-selective atom loss, enables us to tune the energy gap and close it at the critical dissipation value, the so-called exceptional point. In the vicinity of the critical point, the state evolution exhibits a chiral response, which enables us to tune the spin-orbit coupling and dissipation dynamically, revealing topologically robust chiral spin transfer when the quantum state encircles the exceptional point. This demonstrates that we can explore non-Hermitian topological states with spin-orbit coupling.
In this paper, we classify all simple Harish-Chandra modules over the super affine-Virasoro algebra $\widehat{\mathcal{L}}=\mathcal{W}\ltimes(\mathfrak{g}\otimes \mathcal{A})\oplus \mathbb{C}C$, where $\mathcal{A}=\mathbb{C}[t^{\pm 1}]\otimesΛ(1)$ is the tensor superalgebra of the Laurent polynomial algebra in even variable $t$ and the Grassmann algebra in odd variable $ξ$, $\mathcal{W}$ is the Lie superalgebra of superderivations of $\mathcal{A}$, and $\mathfrak{g}$ is a finite-dimensional perfect Lie superalgebra.
The field of structural engineering is vast, spanning areas from the design of new infrastructure to the assessment of existing infrastructure. From the onset, traditional entry-level university courses teach students to analyse structural response given data including external forces, geometry, member sizes, restraint, etc. -- characterising a forward problem (structural causalities $\to$ structural response). Shortly thereafter, junior engineers are introduced to structural design where they aim to, for example, select an appropriate structural form for members based on design criteria, which is the inverse of what they previously learned. Similar inverse realisations also hold true in structural health monitoring and a number of structural engineering sub-fields (response $\to$ structural causalities). In this light, we aim to demonstrate that many structural engineering sub-fields may be fundamentally or partially viewed as inverse problems and thus benefit via the rich and established methodologies from the inverse problems community. To this end, we conclude that the future of inverse problems in structural engineering is inexorably linked to engineering education and machine learning developments.