arXiv subjects

Daniel Grolimund

Publications and source records attributed to Daniel Grolimund.

7 recordsLinked to original sources

arXiv2024

Imaging of electrically controlled van der Waals layer stacking in 1T-TaS2

Van der Waals (vdW) materials exhibit a variety of states that can be switched with low power at low temperatures, offering a viable cryogenic "flash memory" required for the classical control electronics for solid-state quantum information processing. In 1T-TaS2, a non-volatile metallic 'hidden' state can be induced from an insulating equilibrium charge-density wave ground state using either optical or electrical pulses. Given that conventional memristors form localized, filamentary channels which support the current, a key question for design concerns the geometry of the conduction region in highly energy-efficient 1T-TaS2 devices. Here, we report in operando micro-beam X-ray diffraction, fluorescence, and concurrent transport measurements, allowing us to spatially image the non-thermal hidden state induced by electrical switching of 1T-TaS2. Our results reveal a long-range ordered, non-filamentary switched state that extends well below the electrodes, implying that the self-organized, collective growth of the hidden phase is driven by a combination of charge flow and lattice strain. Our unique combination of techniques showcases the potential of non-destructive, three-dimensional X-ray imaging to study bulk switching properties in microscopic detail, namely electrical control of the vdW layer stacking.

cond-mat.str-el↗

arXiv2024

Element-specific, non-destructive profiling of layered heterostructures

Fabrication of semiconductor heterostructures is now so precise that metrology has become a key challenge for progress in science and applications. It is now relatively straightforward to characterize classic III-V and group IV heterostructures consisting of slabs of different semiconductor alloys with thicknesses of $\sim$5 nm and greater using sophisticated tools such as X-ray diffraction, high energy X-ray photoemission spectroscopy, and secondary ion mass spectrometry. However, profiling thin layers with nm or sub-nm thickness, e.g. atomically thin dopant layers ($\delta$-layers), of impurities required for modulation doping and spin-based quantum and classical information technologies is more challenging. Here, we present theory and experiment showing how resonant-contrast X-ray reflectometry meets this challenge. The technique takes advantage of the change in the scattering factor of atoms as their core level resonances are scanned by varying the X-ray energy. We demonstrate the capability of the resulting element-selective, non-destructive profilometry for single arsenic $\delta$-layers within silicon, and show that the sub-nm electronic thickness of the $\delta$-layers corresponds to sub-nm chemical thickness. In combination with X-ray fluorescence imaging, this enables non-destructive three-dimensional characterization of nano-structured quantum devices. Due to the strong resonances at soft X-ray wavelengths, the technique is also ideally suited to characterize layered quantum materials, such as cuprates or the topical infinite-layer nickelates.

quant-ph↗

arXiv2024

Microscale chemical imaging to characterize and quantify corrosion processes at the metal-electrolyte interface

We introduce an experimental setup to chemically image corrosion processes at metal-electrolyte interfaces under stagnant, confined conditions relevant in a wide range of situations. The setup is based on a glass capillary, in which precipitation of corrosion products in the interfacial aqueous phase can be monitored over time with optical microscopy, and chemically and structurally characterized with microscopic synchrotron-based techniques (X-ray fluorescence, X-ray diffraction, and X-ray absorption spectroscopy). Moreover, quantification of precipitates through X-ray transmission measurements provides in-situ corrosion rates. We illustrate this setup for iron corrosion in a pH 8 electrolyte, revealing the critical role of O2 and iron diffusion in governing the precipitation of ferrihydrite and its transformation to goethite. Corrosion and coupled reactive transport processes can thus be monitored and fundamentally investigated at the metal-electrolyte interface, with micrometer-scale resolution. This capillary setup has potential applications for in-situ corrosion studies of various metals and environments.

cond-mat.mtrl-sci↗

arXiv2022

Non-destructive X-ray imaging of patterned delta-layer devices in silicon

The progress of miniaturisation in integrated electronics has led to atomic and nanometre-sized dopant devices in silicon. Such structures can be fabricated routinely by hydrogen resist lithography, using various dopants such as phosphorous and arsenic. However, the ability to non-destructively obtain atomic-species-specific images of the final structure, which would be an indispensable tool for building more complex nano-scale devices, such as quantum co-processors, remains an unresolved challenge. Here we exploit X-ray fluorescence to create an element-specific image of As dopants in silicon, with dopant densities in absolute units and a resolution limited by the beam focal size (here $\sim1~\mu$m), without affecting the device's low temperature electronic properties. The As densities provided by the X-ray data are compared to those derived from Hall effect measurements as well as the standard non-repeatable, scanning tunnelling microscopy and secondary ion mass spectroscopy, techniques. Before and after the X-ray experiments, we also measured the magneto-conductance, dominated by weak localisation, a quantum interference effect extremely sensitive to sample dimensions and disorder. Notwithstanding the $1.5\times10^{10}$ Sv ($1.5\times10^{16}$ Rad/cm$^{-2}$) exposure of the device to X-rays, all transport data were unchanged to within experimental errors, corresponding to upper bounds of 0.2 Angstroms for the radiation-induced motion of the typical As atom and 3$\%$ for the loss of activated, carrier-contributing dopants. With next generation synchrotron radiation sources and more advanced optics, we foresee that it will be possible to obtain X-ray images of single dopant atoms within resolved radii of 5 nm.

quant-ph↗

arXiv2021

Thermal history of matrix forsterite grains from Murchison based on high-resolution tomography

Protoplanetary disks are dust- and gas-rich structures surrounding protostars. Depending on the distance from the protostar, this dust is thermally processed to different degrees and accreted to form bodies of varying chemical compositions. The primordial accretion processes occurring in the early protoplanetary disk such as chondrule formation and metal segregation are not well understood. One way to constrain them is to study the morphology and composition of forsteritic grains from the matrix of carbonaceous chondrites. Here, we present high-resolution ptychographic X-ray nanotomography and multimodal chemical micro-tomography (X-ray diffraction and X-ray fluorescence) to reveal the early history of forsteritic grains extracted from the matrix of the Murchison CM2.5 chondrite. The 3D electron density maps revealed, at unprecedented resolution (64~nm), spherical inclusions containing Fe-Ni, very little silica-rich glass and void caps (i.e., volumes where the electron density is consistent with conditions close to vacuum) trapped in forsterite. The presence of the voids along with the overall composition, petrological textures, and shrinkage calculations is consistent with the grains experiencing one or more heating events with peak temperatures close to the melting point of forsterite ($\sim$2100~K) and subsequently cooled and contracted, in agreement with chondrule-forming conditions.

astro-ph.EP↗

arXiv2017

Tunable kinoform x-ray beam splitter

We demonstrate an x-ray beam splitter with high performances for multi-kilo-electron-volt photons. The device is based on diffraction on kinoform structures, which overcome the limitations of binary diffraction gratings. This beam splitter achieves a dynamical splitting ratio in the range 0-99.1% by tilting the optics and is tunable, here shown in a photon energy range of 7.2-19 keV. High diffraction efficiency of 62.6% together with an extinction ratio of 0.6% is demonstrated at 12.4 keV, with angular separation for the split beam of 0.5 mrad. This device can find applications in beam monitoring at synchrotrons, at x-ray free electron lasers for online diagnostics and beamline multiplexing and, possibly, as key elements for delay lines or ultrashort x-ray pulses manipulation.

physics.app-ph↗

arXiv2016

Localized holes and delocalized electrons in photoexcited inorganic perovskites: Watching each atomic actor by picosecond X-ray absorption spectroscopy

We report on an element-selective study of the fate of charge carriers in photoexcited inorganic CsPbBr3 and CsPb(ClBr)3 perovskite nanocrystals (NCs) in toluene solutions using time-resolved X-ray absorption spectroscopy with 80 ps time resolution. Probing the Br K-edge, the Pb L3-edge and the Cs L2-edge, we find that holes in the valence band are localized at Br atoms, forming small polarons, while electrons appear as delocalized in the conduction band. No signature of either electronic or structural changes are observed at the Cs L2-edge. The results at the Br and Pb edges suggest the existence of a weakly localized exciton, while the absence of signatures at the Cs edge indicates that the Cs+ cation plays no role in the charge transport, at least beyond 80 ps. These results can explain the rather modest charge carrier mobilities in these materials.

cond-mat.mtrl-sci↗