arXiv subjects

Daniel Dominguez

Publications and source records attributed to Daniel Dominguez.

At least 19 recordsLinked to original sources

arXiv2026

Micro-electromechanical photonic integrated memristors

Programmable optical memristors embedded in photonic integrated circuits (PICs) are emerging as an important technology for high-speed optical storage and in-memory optical computing applications. These devices provide multi-level, non-volatile storage of optical phases that can be interrogated at the speed of light, enabling parallel data readout or energy-efficient multiply-accumulate operations in artificial neural networks. However, there remains several outstanding challenges with existing optical memristor technology including durability, material-induced optical losses, large-scale reconfigurability, or fabrication yield for realistic applications. Here we introduce an analog-programmable photonic memristor based on photonic integrated micro-electromechanical (MEMS) cantilevers produced in a CMOS foundry. The memristor consists of low-loss silicon nitride waveguides, requires no additional back-end materials integration, and is all electrically programmed with electrostatic-piezoelectric forces. We demonstrate up to 5-bit phase storage levels, 50 kbit/s programming speeds, strain-assisted non-volatility lifetimes >1 hour, >1 billion cycle endurance, and stress-tested millions of write-read cycles with pseudorandom bit sequences. We further extend the memory lifetime to several days with simple electronic refresh circuits in a portable battery-powered module, demonstrating a proof-of-concept optical random-access memory in static or dynamic configurations. Our MEMS-photonics technology represents an important step toward practical optical memristors.

physics.optics↗

arXiv2026

Optimizing LZSM protocol for high-fidelity gates in open-system fluxonium

Quantum gates based on resonant Rabi oscillations are inherently slow for small-frequency qubits. They are also prone to errors due to counter-rotating terms. However, when the anharmonicity is sufficiently high, as in the fluxonium architecture, alternative manipulation protocols can outperform standard resonant driving. In this work, we implement fast, high-fidelity quantum gates based on a one-period Landau-Zener-St\"uckelberg-Majorana (LZSM) driving protocol. We derive analytical expressions that simplify the exploration of the parameter space while accounting for the multi-level structure of the circuit. Furthermore, we analyze the role of leakage, discussing strategies to mitigate it and identifying regimes in which it becomes the dominant source of error. Finally, to evaluate the impact of dissipation on gate fidelity, we develop a robust formalism suitable for analyzing the open-system performance of quantum gates in the strong driving regime.

quant-ph↗

arXiv2026

Monolithic Integration of Piezo-Optomechanical Photonics and CMOS Electronics

Next-generation photonic architectures for AI, sensing, and quantum computing require thousands to millions of reprogrammable photonic devices on a chip[1]. The monolithic integration of Electronically-backed Photonic Integrated Circuits (EPICs) allows for very high density electrical interconnection and electronic drivers that can scale with photonics. Piezo-optomechanical photonic integrated circuits (POMPICs) offer low power consumption, high speed modulation, cryogenic compatibility and broadband optical transparency from ultraviolet to infrared wavelengths[2,3], but have not been demonstrated with monolithically integrated CMOS electronics. Here, we show a fully monolithic, all-CMOS fabricated platform for POMPICs co-fabricated with commercial control electronics. 200 millimeter photonic wafers are constructed directly on completed CMOS driver wafers by back-end-of-line processing, connecting integrated piezoelectric actuators under broadband silicon nitride waveguides to a high-density digital backplane comprising >2 million electrical connections per die with 6.4x6.4 micron electrode pitch. We introduce segmented POMPIC components as Photonic Digital-to-Analog converters (PDACs) that convert low-voltage digital electronic signals to multi-bit analog optical phase and amplitude modulation, and we demonstrate parallel control of optical phase shifters, Mach-Zehnder interferometers, optical routing trees, and tunable ring resonators using a standard HDMI interface to program CMOS electronics. We test multiple reticles and perform electronic and photonic characterization across the entire wafer to establish uniformity and yield, demonstrating wafer-scale integration of POMPICs on an electronic backplane and enabling dense, scalable electronic control of piezo-optomechanical circuits.

physics.optics↗

arXiv2026

Floquet Entanglement Generation in Parametrically Driven Coupled Superconducting Qubits

We investigate the dynamical generation of entanglement in a system of two superconducting qubits coupled through a parametrically driven longitudinal interaction. Using Floquet theory and exact numerical simulations, we analyze the time evolution of the system initialized in a separable ground state. Our results reveal a nontrivial mechanism for entanglement generation, fundamentally distinct from the conventional resonant excitation to an entangled eigenstate. We show that this mechanism emerges when two initially separable eigenstates are mixed by the periodic driving under multiphoton resonance conditions. Since the effect cannot be captured within a standard rotating-wave approximation, we employ generalized Van Vleck near-degenerate perturbation theory to derive an effective analytical description. Within this framework, we demonstrate that the sustained entanglement originates from the hybridization of the dominant Floquet states, namely those with the largest overlap with the initial ground state. Furthermore, the degree of entanglement can be efficiently controlled through the driving amplitude. In particular, for specific amplitudes, the entanglement is fully suppressed. We term this phenomenon as coherent destruction of entanglement.

quant-ph↗

arXiv2026

Ultra-low loss piezo-optomechanical low-confinement silicon nitride platform for visible wavelength quantum photonic circuits

Realizing photonic quantum computing at scale requires integrated circuits that combine ultra-low loss with fast, low-power, low-hysteresis, and low-crosstalk reconfiguration. These requirements are particularly challenging at visible wavelengths, where many quantum resource-state generators, including single-photon sources and quantum memories, naturally operate. Low-confinement silicon nitride waveguides offer the requisite loss performance, but conventional thermo-optic modulators dissipate significant static power, driving thermal crosstalk and precluding cryogenic operation. Visible-wavelength piezo-optomechanical circuits avoid these drawbacks, but existing demonstrations rely either on high-confinement waveguides with propagation losses of 35-100 dB/m, or on low-confinement platforms using foundry-incompatible PZT. Here we combine piezo-optomechanical actuation with a CMOS-foundry-fabricated, low-confinement silicon nitride platform, achieving 2.6 dB/m propagation loss at 780 nm, megahertz-scale modulation bandwidth, a half-wave voltage-length product of 2.8 Vm, and negligible hysteresis. We demonstrate reconfigurable Mach-Zehnder interferometers with 0.63 dB loss per spiral phase shifter, enabling deep, actively reconfigurable visible-wavelength quantum photonic circuits.

physics.optics↗

arXiv2025

Hybrid electrostatic-piezo MEMS photonic integrated modulators

Programmable photonic integrated circuits (PICs) have recently emerged as an important technology for quantum information science and artificial neural networks. In particular, PICs with MEMS-based modulators have the advantages of voltage-based control, ultra-low-energy consumption, cryogenic compatibility, and CMOS-foundry support. Here we report a cantilever optical modulator that utilizes hybrid piezoelectric and electrostatic tuning forces together on a monolithic silicon nitride (SiN) PIC platform. The device achieves actuation of visible-wavelength light with quasi-static tuning up to 10 kHz at 1.5 V{\pi}-cm as well as high-speed (>20 MHz) AC modulation with dynamically adjustable (25 - 40 MHz) mechanical resonances. We report the physics of how geometric nonlinearities such as capacitive pull-in give rise to suspended and contacted cantilever modes. These reversible operating regimes generate different strain profiles and boundary conditions which are responsible for the active tuning of the mechanical resonances. Our proof-of-concept electrostatic-piezo modulator shows promising potential in large-scale programmable PICs applied to high-speed optical switching and optomechanical sensing.

physics.optics↗

arXiv2025

An integrated photonics platform for high-speed, ultrahigh-extinction, many-channel quantum control

High-fidelity control of the thousands to millions of programmable qubits needed for utility-scale quantum computers presents a formidable challenge for control systems. In leading atomic systems, control is optical: UV-NIR beams must be fanned out over numerous spatial channels and modulated to implement gates. While photonic integrated circuits (PICs) offer a potentially scalable solution, they also need to simultaneously feature high-speed and high-extinction modulation, strong inter-channel isolation, and broad wavelength compatibility. Here, we introduce and experimentally validate a foundry-fabricated PIC platform that overcomes these limitations. Designed for Rubidium-87 neutral atom quantum computers, our 8-channel PICs, fabricated on a 200-mm wafer process, demonstrate an advanced combination of performance metrics. At the 795 nm single-qubit gate wavelength, we achieve a mean extinction ratio (ER) of 71.4 $\pm$ 1.1 dB, nearest-neighbor on-chip crosstalk of -68.0 $\pm$ 1.0 dB, and -50.8 $\pm$ 0.2 dB after parallel beam delivery in free-space. This high-performance operation extends to the 420 nm and 1013 nm wavelengths for two-qubit Rydberg gates, showing ERs of 42.4 dB (detector-limited) and 61.5 dB, respectively. The devices exhibit 10-90% rise times of 26 $\pm$ 7 ns, achieve dynamic switching to -60 dB levels within microsecond timescales, and show pulse stability errors at the $10^{-3}$ level. This work establishes a scalable platform for developing advanced large-scale optical control required in fault-tolerant quantum computers and other precision technologies.

quant-ph↗

arXiv2025

Towards Navigation-Grade and Deployable Optomechanical Accelerometry

We design and experimentally demonstrate an architecture for achieving navigation-grade, fiber-packaged optomechanical accelerometers that can operate with a large dynamic range, over a wide temperature range, and without sophisticated laser sources. Our accelerometer architecture is based on a novel set of design principles that take advantage of the strengths of optomechanical accelerometry while eliminating many of its historical weaknesses. Displacement readout is provided by an integrated, differential strain-sensing Mach-Zehnder interferometer (DSMZI) attached to an ultra-rigid, bulk-micromachined proof mass having a 93.4 kHz fundamental resonance frequency (22.5 pm/g displacement). Despite the extreme rigidity, the high displacement sensitivity provides an insertion loss limited 4.2 $\mu g/\sqrt{\mathrm{Hz}}$ acceleration resolution, with a straight-forward path to achieving 330 $n g/\sqrt{\mathrm{Hz}}$ by improving the fiber-to-chip coupling. Further, we show that the combination of high rigidity and intrinsic differential optical readout makes the device insensitive to the common causes of bias instability, and we measure a bias instability of 6.3 $\mu g$ at 243 seconds. The DSMZI provides a 17 nm optical bandwidth and a temperature operating range of greater than 20 $^\circ\mathrm{C}$, both orders of magnitude larger than previous demonstrations of optomechanical accelerometers. The high rigidity and large optical bandwidth yield an expected dynamic range of 165.4 dB. The combination of high acceleration resolution, high dynamic range, low bias instability, and intrinsic insensitivity to wavelength, temperature, and package stresses makes our device well suited for deployment in realistic environments demanded by real-world applications and demonstrates a path for optomechanical accelerometers to ultimately exceed the performance of all other chip-based accelerometers.

physics.optics↗

arXiv2025

Landau-Zener-St\"uckelberg spectroscopy of a fluxonium quantum circuit

In this work, we study the time-averaged populations obtained for a fluxonium circuit under a large amplitude nonresonant periodic drive. We present numerical simulations of the time evolution which consider the multi-level structure of the driven quantum circuit, looking for a realistic modeling closer to experimental implementations. The Landau-Zener-St\"uckelberg spectra show resonances that can be understood as originated from constructive interference favoring transitions to higher levels. For a truncated two-level system (TLS) the resonance patterns can be interpreted using a simplified description of the avoided crossing that takes into account the dynamic phase accumulated at each operation point. For the multilevel case, we derive an effective two-level Hamiltonian using a Schrieffer-Wolff transformation starting from the Floquet Hamiltonian in the Sambe space. Our study provides predictive insight into experimental outcomes, offering an intuitive interpretation that could also support the implementation of fast-non-adiabatic single-qubit gates and entangling protocols.

cond-mat.mes-hall↗

arXiv2025

Gigahertz-Frequency, Acousto-Optic Phase Modulation of Visible Light in a CMOS-Fabricated Photonic Circuit

Here we present an efficient, visible-light, gigahertz-frequency acousto-optic modulator fabricated on a 200 mm wafer in a volume CMOS foundry. Our device combines a piezoelectric transducer and a photonic waveguide within a single microstructure that confines both a propagating optical mode and an electrically excitable breathing-mode mechanical resonance. By tuning the device's geometry to optimize the optomechanical interaction, we achieve modulation depths exceeding 2 rad with 15 mW applied microwave power at 2.31 GHz in a 2 mm long device. This corresponds to a modulation figure of merit of $V_{\pi}\cdot L$ = 0.26 Vcm in a visible-light, integrated acousto-optics platform that can be straightforwardly extended to a wide range of optical wavelengths and modulation frequencies. For the important class of gigahertz-frequency modulators that can handle hundreds of milliwatts of visible-light optical power, which are critical for scalable quantum control systems, this represents a 15x decrease in $V_{\pi}$ and a 100x decrease in required microwave power compared to the commercial state-of-the-art and existing work in the literature.

physics.optics↗

arXiv2024

CMOS-fabricated ultraviolet light modulators using low-loss alumina piezo-optomechanical photonic circuits

Ultra-violet (UV) and near-UV wavelengths are necessary for many important optical transitions for quantum technologies and various sensing mechanisms for biological and chemical detection. However, all well-known photonic platforms have excessively high losses in the UV, which has prevented photonic integrated circuits (PICs) being used to address these and other important application spaces. Photonic waveguides using low-loss alumina cores have emerged as a promising solution because of almunia's large optical bandgap and the high quality of films enabled by atomic layer deposition. However, to the best of our knowledge, active alumina PICs have only been realized using thermo-optic tuning, which precludes switching speeds shorter than one microsecond, high circuit densities, and cryogenically compatible operation. Here, we introduce a CMOS-fabricated, piezo-optomechanical PIC platform using alumina waveguides with low optical losses at UV wavelengths and aluminum nitride piezoelectric strain actuators, which solves the issues associated with thermal tuning. We demonstrate a high-performance, reconfigurable optical filter operating at wavelengths as low as 320 nm. The filter has a 6 nanosecond switching time, a loaded linewidth of 3.3 GHz, tuning rate of -120 MHz/V, and a hold power less than 20 nW.

physics.optics↗

arXiv2024

Time-connected phase slips in current-driven two-band superconducting wires

We study quasi-one dimensional wires of two-band superconductors driven by an electrical current. We find that the onset of dissipation can occur with the nucleation of time-connected phase slips (t-PS). The topological structure of the t-PS consists of two phase slips (one in each order parameter) separated in time and connected via an interband vortex string along the time direction. This shows as a two-peak structure in voltage vs. time. We discuss the conditions for observing t-PS, depending on the interband coupling strength and the relaxation time scales for each order parameter.

cond-mat.supr-con↗

arXiv2023

Fast quantum gates based on Landau-Zener-St\"uckelberg-Majorana transitions

Fast quantum gates are of paramount importance for enabling efficient and error-resilient quantum computations. In the present work we analyze Landau-Zener-St\"uckelberg-Majorana (LSZM) strong driving protocols, tailored to implement fast gates with particular emphasis on small gap qubits. We derive analytical equations to determine the specific set of driving parameters for the implementation of single qubit and two qubit gates employing single period sinusoidal pulses. Our approach circumvents the need to scan experimentally a wide range of parameters and instead it allows to focus in fine-tuning the device near the analytically predicted values. We analyze the dependence of relaxation and decoherence on the amplitude and frequency of the pulses, obtaining the optimal regime of driving parameters to mitigate the effects of the environment. Our results focus on the study of the single qubit $X_{\frac{\pi}{2}}$, $Y_{\frac{\pi}{2}}$ and identity gates. Also, we propose the $\sqrt{\rm{bSWAP}}$ as the simplest two-qubit gate attainable through a robust LZSM driving protocol.

quant-ph↗

arXiv2023

Nanoelectromechanical control of spin-photon interfaces in a hybrid quantum system on chip

Atom-like defects or color centers (CC's) in nanostructured diamond are a leading platform for optically linked quantum technologies, with recent advances including memory-enhanced quantum communication, multi-node quantum networks, and spin-mediated generation of photonic cluster states. Scaling to practically useful applications motivates architectures meeting the following criteria: C1 individual optical addressing of spin qubits; C2 frequency tuning of CC spin-dependent optical transitions; C3 coherent spin control in CC ground states; C4 active photon routing; C5 scalable manufacturability; and C6 low on-chip power dissipation for cryogenic operations. However, no architecture meeting C1-C6 has thus far been demonstrated. Here, we introduce a hybrid quantum system-on-chip (HQ-SoC) architecture that simultaneously achieves C1-C6. Key to this advance is the realization of piezoelectric strain control of diamond waveguide-coupled tin vacancy centers to meet C2 and C3, with ultra-low power dissipation necessary for C6. The DC response of our device allows emitter transition tuning by over 20 GHz, while the large frequency range (exceeding 2 GHz) enables low-power AC control. We show acoustic manipulation of integrated tin vacancy spins and estimate single-phonon coupling rates over 1 kHz in the resolved sideband regime. Combined with high-speed optical routing with negligible static hold power, this HQ-SoC platform opens the path to scalable single-qubit control with optically mediated entangling gates.

quant-ph↗

arXiv2023

Synchronous micromechanically resonant programmable photonic circuits

Programmable photonic integrated circuits (PICs) are emerging as powerful tools for the precise manipulation of light, with applications in quantum information processing, optical range finding, and artificial intelligence. The leading architecture for programmable PICs is the mesh of Mach-Zehnder interferometers (MZIs) embedded with reconfigurable optical phase shifters. Low-power implementations of these PICs involve micromechanical structures driven capacitively or piezoelectrically but are limited in modulation bandwidth by mechanical resonances and high operating voltages. However, circuits designed to operate exclusively at these mechanical resonances would reduce the necessary driving voltage from resonantly enhanced modulation as well as maintaining high actuation speeds. Here we introduce a synchronous, micromechanically resonant design architecture for programmable PICs, which exploits micromechanical eigenmodes for modulation enhancement. This approach combines high-frequency mechanical resonances and optically broadband phase shifters to increase the modulation response on the order of the mechanical quality factor $Q_m$, thereby reducing the PIC's power consumption, voltage-loss product, and footprint. The architecture is useful for broadly applicable circuits such as optical phased arrays, $1$ x $N$, and $N$ x $N$ photonic switches. We report a proof-of-principle programmable 1 x 8 switch with piezoelectric phase shifters at specifically targeted mechanical eigenfrequencies, showing a full switching cycle of all eight channels spaced by approximately 11 ns and operating at >3x average modulation enhancement across all on-chip modulators. By further leveraging micromechanical devices with high $Q_m$, which can exceed 1 million, our design architecture should enable a new class of low-voltage and high-speed programmable PICs.

physics.optics↗

arXiv2023

Modular chip-integrated photonic control of artificial atoms in diamond nanostructures

A central goal in creating long-distance quantum networks and distributed quantum computing is the development of interconnected and individually controlled qubit nodes. Atom-like emitters in diamond have emerged as a leading system for optically networked quantum memories, motivating the development of visible-spectrum, multi-channel photonic integrated circuit (PIC) systems for scalable atom control. However, it has remained an open challenge to realize optical programmability with a qubit layer that can achieve high optical detection probability over many optical channels. Here, we address this problem by introducing a modular architecture of piezoelectrically-actuated atom-control PICs (APICs) and artificial atoms embedded in diamond nanostructures designed for high-efficiency free-space collection. The high-speed 4-channel APIC is based on a splitting tree mesh with triple-phase shifter Mach-Zehnder interferometers. This design simultaneously achieves optically broadband operation at visible wavelengths, high-fidelity switching ($> 40$ dB) at low voltages, sub-$\mu$s modulation timescales ($> 30$ MHz), and minimal channel-to-channel crosstalk for repeatable optical pulse carving. Via a reconfigurable free-space interconnect, we use the APIC to address single silicon vacancy color centers in individual diamond waveguides with inverse tapered couplers, achieving efficient single photon detection probabilities (15$\%$) and second-order autocorrelation measurements $g^{(2)}(0) < 0.14$ for all channels. The modularity of this distributed APIC - quantum memory system simplifies the quantum control problem, potentially enabling further scaling to 1000s of channels.

quant-ph↗

arXiv2022

High-fidelity trapped-ion qubit operations with scalable photonic modulators

Experiments with trapped ions and neutral atoms typically employ optical modulators in order to control the phase, frequency, and amplitude of light directed to individual atoms. These elements are expensive, bulky, consume substantial power, and often rely on free-space I/O channels, all of which pose scaling challenges. To support many-ion systems like trapped-ion quantum computers or miniaturized deployable devices like clocks and sensors, these elements must ultimately be microfabricated, ideally monolithically with the trap to avoid losses associated with optical coupling between physically separate components. In this work we design, fabricate, and test an optical modulator capable of monolithic integration with a surface-electrode ion trap. These devices consist of piezo-optomechanical photonic integrated circuits configured as multi-stage Mach-Zehnder modulators that are used to control the intensity of light delivered to a single trapped ion on a separate chip. We use quantum tomography employing hundreds of multi-gate sequences to enhance the sensitivity of the fidelity to the types and magnitudes of gate errors relevant to quantum computing and better characterize the performance of the modulators, ultimately measuring single qubit gate fidelities that exceed 99.7%.

quant-ph↗

arXiv2022

Programmable photonic integrated meshes for modular generation of optical entanglement links

Large-scale generation of quantum entanglement between individually controllable qubits is at the core of quantum computing, communications, and sensing. Modular architectures of remotely-connected quantum technologies have been proposed for a variety of physical qubits, with demonstrations reported in atomic and all-photonic systems. However, an open challenge in these architectures lies in constructing high-speed and high-fidelity reconfigurable photonic networks for optically-heralded entanglement among target qubits. Here we introduce a programmable photonic integrated circuit (PIC), realized in a piezo-actuated silicon nitride (SiN)-in-oxide CMOS-compatible process, that implements an N x N Mach-Zehnder mesh (MZM) capable of high-speed execution of linear optical transformations. The visible-spectrum photonic integrated mesh is programmed to generate optical connectivity on up to N = 8 inputs for a range of optically-heralded entanglement protocols. In particular, we experimentally demonstrated optical connections between 16 independent pairwise mode couplings through the MZM, with optical transformation fidelities averaging 0.991 +/- 0.0063. The PIC's reconfigurable optical connectivity suffices for the production of 8-qubit resource states as building blocks of larger topological cluster states for quantum computing. Our programmable PIC platform enables the fast and scalable optical switching technology necessary for network-based quantum information processors.

quant-ph↗