arXiv Science⌕ Search

arXiv subjects

Chenwei Wang

Publications and source records attributed to Chenwei Wang.

At least 55 records · Page 3Linked to original sources

Global in Local: A Convolutional Transformer for SAR ATR FSL

Convolutional neural networks (CNNs) have dominated the synthetic aperture radar (SAR) automatic target recognition (ATR) for years. However, under the limited SAR images, the width and depth of the CNN-based models are limited, and the widening of the received field for global features in images is hindered, which finally leads to the low performance of recognition. To address these challenges, we propose a Convolutional Transformer (ConvT) for SAR ATR few-shot learning (FSL). The proposed method focuses on constructing a hierarchical feature representation and capturing global dependencies of local features in each layer, named global in local. A novel hybrid loss is proposed to interpret the few SAR images in the forms of recognition labels and contrastive image pairs, construct abundant anchor-positive and anchor-negative image pairs in one batch and provide sufficient loss for the optimization of the ConvT to overcome the few sample effect. An auto augmentation is proposed to enhance and enrich the diversity and amount of the few training samples to explore the hidden feature in a few SAR images and avoid the over-fitting in SAR ATR FSL. Experiments conducted on the Moving and Stationary Target Acquisition and Recognition dataset (MSTAR) have shown the effectiveness of our proposed ConvT for SAR ATR FSL. Different from existing SAR ATR FSL methods employing additional training datasets, our method achieved pioneering performance without other SAR target images in training.

eess.IV↗

SAR ATR under Limited Training Data Via MobileNetV3

In recent years, deep learning has been widely used to solve the bottleneck problem of synthetic aperture radar (SAR) automatic target recognition (ATR). However, most current methods rely heavily on a large number of training samples and have many parameters which lead to failure under limited training samples. In practical applications, the SAR ATR method needs not only superior performance under limited training data but also real-time performance. Therefore, we try to use a lightweight network for SAR ATR under limited training samples, which has fewer parameters, less computational effort, and shorter inference time than normal networks. At the same time, the lightweight network combines the advantages of existing lightweight networks and uses a combination of MnasNet and NetAdapt algorithms to find the optimal neural network architecture for a given problem. Through experiments and comparisons under the moving and stationary target acquisition and recognition (MSTAR) dataset, the lightweight network is validated to have excellent recognition performance for SAR ATR on limited training samples and be very computationally small, reflecting the great potential of this network structure for practical applications.

eess.IV↗

The performance of SiPM-based gamma-ray detector (GRD) of GECAM-C

As a new member of GECAM mission, the GECAM-C (also called High Energy Burst Searcher, HEBS) is a gamma-ray all-sky monitor onboard SATech-01 satellite, which was launched on July 27th, 2022 to detect gamma-ray transients from 6 keV to 6 MeV, such as Gamma-Ray Bursts (GRBs), high energy counterpart of Gravitational Waves (GWs) and Fast Radio Bursts (FRBs), and Soft Gamma-ray Repeaters (SGRs). Together with GECAM-A and GECAM-B launched in December 2020, GECAM-C will greatly improve the monitoring coverage, localization, as well as temporal and spectral measurements of gamma-ray transients. GECAM-C employs 12 SiPM-based Gamma-Ray Detectors (GRDs) to detect gamma-ray transients . In this paper, we firstly give a brief description of the design of GECAM-C GRDs, and then focus on the on-ground tests and in-flight performance of GRDs. We also did the comparison study of the SiPM in-flight performance between GECAM-C and GECAM-B. The results show GECAM-C GRD works as expected and is ready to make scientific observations.

astro-ph.IM↗

A Localization Method of High Energy Transients for All-Sky Gamma-Ray Monitor

Fast and reliable localization of high-energy transients is crucial for characterizing the burst properties and guiding the follow-up observations. Localization based on the relative counts of different detectors has been widely used for all-sky gamma-ray monitors. There are two major methods for this counts distribution localization: $χ^{2}$ minimization method and the Bayesian method. Here we propose a modified Bayesian method that could take advantage of both the accuracy of the Bayesian method and the simplicity of the $χ^{2}$ method. With comprehensive simulations, we find that our Bayesian method with Poisson likelihood is generally more applicable for various bursts than $χ^{2}$ method, especially for weak bursts. We further proposed a location-spectrum iteration approach based on the Bayesian inference, which could alleviate the problems caused by the spectral difference between the burst and location templates. Our method is very suitable for scenarios with limited computation resources or time-sensitive applications, such as in-flight localization software, and low-latency localization for rapid follow-up observations.

astro-ph.HE↗

Aiming in Harsh Environments: A New Framework for Flexible and Adaptive Resource Management

The harsh environment imposes a unique set of challenges on networking strategies. In such circumstances, the environmental impact on network resources and long-time unattended maintenance has not been well investigated yet. To address these challenges, we propose a flexible and adaptive resource management framework that incorporates the environment awareness functionality. In particular, we propose a new network architecture and introduce the new functionalities against the traditional network components. The novelties of the proposed architecture include a deep-learning-based environment resource prediction module and a self-organized service management module. Specifically, the available network resource under various environmental conditions is predicted by using the prediction module. Then based on the prediction, an environment-oriented resource allocation method is developed to optimize the system utility. To demonstrate the effectiveness and efficiency of the proposed new functionalities, we examine the method via an experiment in a case study. Finally, we introduce several promising directions of resource management in harsh environments that can be extended from this paper.

cs.NI↗

Gain stabilization and consistency correction approach for multiple SiPM-based gamma-ray detectors on GECAM

Each satellite of the Gravitational wave high-energy Electromagnetic Counterpart All-sky Monitor (GECAM, mission) consists of 25 SiPM based gamma-ray detectors (GRDs). Although SiPM based GRD has merits of compact size and low bias-voltage, the drift of the SiPM gain with temperature is a severe problem for GRD performance. An adaptive voltage supply source was designed to automatically adjust the SiPM bias voltage to compensate the temperature effects and keep the gain stable. This approach has been proved to be effective during both the on-ground and in-flight tests. The in-flight measured variation of the SiPM gain is within 2%. To reduce the gain non-uniformity of GRDs, an iterative bias voltage adjustment approach is proposed and implemented. The gain non-uniformity is reduced from 17% to 0.6%. In this paper, the gain stabilization and consistency correction approach are presented and discussed in detail.

physics.ins-det↗

Vision-Aided Beam Tracking: Explore the Proper Use of Camera Images with Deep Learning

We investigate the problem of wireless beam tracking on mmWave bands with the assistance of camera images. In particular, based on the user's beam indices used and camera images taken in the trajectory, we predict the optimal beam indices in the next few time spots. To resolve this problem, we first reformulate the "ViWi" dataset in [1] to get rid of the image repetition problem. Then we develop a deep learning approach and investigate various model components to achieve the best performance. Finally, we explore whether, when, and how to use the image for better beam prediction. To answer this question, we split the dataset into three clusters -- (LOS, light NLOS, serious NLOS)-like -- based on the standard deviation of the beam sequence. With experiments we demonstrate that using the image indeed helps beam tracking especially when the user is in serious NLOS, and the solution relies on carefully-designed dataset for training a model. Generally speaking, including NLOS-like data for training a model does not benefit beam tracking of the user in LOS, but including light NLOS-like data for training a model benefits beam tracking of the user in serious NLOS.

cs.LG↗

Leveraging an Efficient and Semantic Location Embedding to Seek New Ports of Bike Share Services

For short distance traveling in crowded urban areas, bike share services are becoming popular owing to the flexibility and convenience. To expand the service coverage, one of the key tasks is to seek new service ports, which requires to well understand the underlying features of the existing service ports. In this paper, we propose a new model, named for Efficient and Semantic Location Embedding (ESLE), which carries both geospatial and semantic information of the geo-locations. To generate ESLE, we first train a multi-label model with a deep Convolutional Neural Network (CNN) by feeding the static map-tile images and then extract location embedding vectors from the model. Compared to most recent relevant literature, ESLE is not only much cheaper in computation, but also easier to interpret via a systematic semantic analysis. Finally, we apply ESLE to seek new service ports for NTT DOCOMO's bike share services operated in Japan. The initial results demonstrate the effectiveness of ESLE, and provide a few insights that might be difficult to discover by using the conventional approaches.

cs.LG↗

On-the-fly Large-scale Channel-Gain Estimation for Massive Antenna-Array Base Stations

We propose a novel scheme for estimating the large-scale gains of the channels between user terminals (UTs) and base stations (BSs) in a cellular system. The scheme leverages TDD operation, uplink (UL) training by means of properly designed non-orthogonal pilot codes, and massive antenna arrays at the BSs. Subject to Q resource elements allocated for UL training and using the new scheme, a BS is able to estimate the large-scale channel gains of K users transmitting UL pilots in its cell and in nearby cells, provided K<=Q^2. Such knowledge of the large-scale channel gains of nearby out-of-cells users can be exploited at the BS to mitigate interference to the out-of-cell users that experience the highest levels of interference from the BS. We investigate the large-scale gain estimation performance provided by a variety of non-orthogonal pilot codebook designs. Our simulations suggest that among all the code designs considered, Grassmannian line-packing type codes yield the best large-scale channel gain estimation performance.

cs.IT↗

On-the-fly Uplink Training and Pilot Code Sequence Design for Cellular Networks

Cellular networks of massive MIMO base-stations employing TDD/OFDM and relying on uplink training for both downlink and uplink transmission are viewed as an attractive candidate for 5G deployments, as they promise high area spectral and energy efficiencies with relatively simple low-latency operation. We investigate the use of non-orthogonal uplink pilot designs as a means for improving the area spectral efficiency in the downlink of such massive MIMO cellular networks. We develop a class of pilot designs that are locally orthogonal within each cell, while maintaining low inner-product properties between codes in different cells. Using channel estimates provided by observations on these codes, each cell independently serves its locally active users with MU-MIMO transmission that is also designed to mitigate interference to a subset of `strongly interfered' out-of-cell users. As our simulation-based analysis shows, such cellular operation based on the proposed codes yields user-rate CDF improvement with respect to conventional operation, which can be exploited to improve cell and/or cell-throughput performance.

cs.IT↗

Fog Massive MIMO: A User-Centric Seamless Hot-Spot Architecture

The decoupling of data and control planes, as proposed for 5G networks, will enable the efficient implementation of multitier networks where user equipment (UE) nodes obtain coverage and connectivity through the top-tier macro-cells, and, at the same time, achieve high-throughput low-latency communication through lower tiers in the hierarchy. This paper considers a new architecture for such lower tiers, dubbed fog massive MIMO, where the UEs are able to establish high-throughput low-latency data links in a seamless and opportunistic manner, as they travel through a dense fog of high-capacity wireless infrastructure nodes, referred to as remote radio heads (RRHs). Traditional handover mechanisms in dense multicell networks inherently give rise to frequent handovers and pilot sequence re-assignments, incurring, as a result, excessive protocol overhead and significant latency. In the proposed fog massive MIMO architecture, UEs seamlessly and implicitly associate themselves to the most convenient RRHs in a completely autonomous manner. Each UE makes use of a unique uplink pilot sequence, and pilot contamination is mitigated by a novel coded "on-the-fly" pilot contamination control mechanism. We analyze the spectral efficiency and the outage probability of the proposed architecture via stochastic geometry, using some recent results on unique coverage in Boolean models, and provide a detailed comparison with respect to an idealized baseline massive MIMO cellular system, that neglects protocol overhead and latency due to explicit user-cell association. Our analysis, supported by extensive system simulation, reveals that there exists a "sweet spot" of the per-pilot user load (number of users per pilot), such that the proposed system achieves spectral efficiency close to that of an ideal cellular system with the minimum distance user-base station association and no pilot/handover overhead.

cs.IT↗

Predicting Wireless Channel Features using Neural Networks

We investigate the viability of using machine-learning techniques for estimating user-channel features at a large-array base station (BS). In the scenario we consider, user-pilot broadcasts are observed and processed by the BS to extract angle-of-arrival (AoA) specific information about propagation-channel features, such as received signal strength and relative path delay. The problem of interest involves using this information to predict the angle-of-departure (AoD) of the dominant propagation paths in the user channels, i.e., channel features not directly observable at the BS. To accomplish this task, the data collected in the same propagation environment are used to train neural networks. Our studies rely on ray-tracing channel data that have been calibrated against measurements from Shinjuku Square, a famous hotspot in Tokyo, Japan. We demonstrate that the observed features at the BS side are correlated with the angular features at the user side. We train neural networks that exploit different combinations of measured features at the BS to infer the unknown parameters at the users. The evaluation based on standard statistical performance metrics suggests that such data-driven methods have the potential to predict unobserved channel features from observed ones.

eess.SP↗

Efficient C-RAN Random Access for IoT Devices: Learning Links via Recommendation Systems

We focus on C-RAN random access protocols for IoT devices that yield low-latency high-rate active-device detection in dense networks of large-array remote radio heads. In this context, we study the problem of learning the strengths of links between detected devices and network sites. In particular, we develop recommendation-system inspired algorithms, which exploit random-access observations collected across the network to classify links between active devices and network sites across the network. Our simulations and analysis reveal the potential merit of data-driven schemes for such on-the-fly link classification and subsequent resource allocation across a wide-area network.

cs.IT↗

On Heterogeneous Coded Distributed Computing

We consider the recently proposed Coded Distributed Computing (CDC) framework that leverages carefully designed redundant computations to enable coding opportunities that substantially reduce the communication load of distributed computing. We generalize this framework to heterogeneous systems where different nodes in the computing cluster can have different storage (or processing) capabilities. We provide the information-theoretically optimal data set placement and coded data shuffling scheme that minimizes the communication load in a cluster with 3 nodes. For clusters with $K>3$ nodes, we provide an algorithm description to generalize our coding ideas to larger networks.

cs.DC↗

SINR-Threshold Scheduling with Binary Power Control for D2D Networks

In this paper, we consider a device-to-device communication network in which $K$ transmitter-receiver pairs are sharing spectrum with each other. We propose a novel but simple binary scheduling scheme for this network to maximize the average sum rate of the pairs. According to the scheme, each receiver predicts its Signal-to-Interference-plus-Noise Ratio (SINR), assuming \emph{all} other user pairs are active, and compares it to a preassigned threshold to decide whether its corresponding transmitter to be activated or not. For our proposed scheme, the optimal threshold that maximizes the expected sum rate is obtained analytically for the two user-pair case and empirically in the general $K$ user-pair case. Simulation results reveal that our proposed SINR-threshold scheduling scheme outperforms ITLinQ \cite{navid}, FlashLinQ \cite{flash} and the method presented in \cite{G} in terms of the expected sum rate (network throughput). In addition, the computational complexity of the proposed scheme is $O(K)$, outperforming both ITLinQ and FlashLinQ that have $O(K^2)$ complexity requirements. Moreover, we also discuss the application of our proposed new scheme into an operator-assisted cellular D2D heterogeneous network.

cs.IT↗

Directional Training and Fast Sector-based Processing Schemes for mmWave Channels

We consider a single-cell scenario involving a single base station (BS) with a massive array serving multi-antenna terminals in the downlink of a mmWave channel. We present a class of multiuser user MIMO schemes, which rely on uplink training from the user terminals, and on uplink/downlink channel reciprocity. The BS employs virtual sector-based processing according to which, user-channel estimation and data transmission are performed in parallel over non-overlapping angular sectors. The uplink training schemes we consider are non-orthogonal, that is, we allow multiple users to transmit pilots on the same pilot dimension (thereby potentially interfering with one another). Elementary processing allows each sector to determine the subset of user channels that can be resolved on the sector (effectively pilot contamination free) and, thus, the subset of users that can be served by the sector. This allows resolving multiple users on the same pilot dimension at different sectors, thereby increasing the overall multiplexing gains of the system. Our analysis and simulations reveal that, by using appropriately designed directional training beams at the user terminals, the sector-based transmission schemes we present can yield substantial spatial multiplexing and ergodic user-rates improvements with respect to their orthogonal-training counterparts.

cs.IT↗

A novel alternative to Cloud RAN for throughput densification: Coded pilots and fast user-packet scheduling at remote radio heads

We consider wireless networks of remote radio heads (RRH) with large antenna-arrays, operated in TDD, with uplink (UL) training and channel-reciprocity based downlink (DL) transmission. To achieve large area spectral efficiencies, we advocate the use of methods that rely on rudimentary scheduling, decentralized operation at each RRH and user-centric DL transmission. A slotted system is assumed, whereby users are randomly scheduled (e.g., via shuffled round robin) in slots and across the limited pilot dimensions per slot. As a result, multiple users in the vicinity of an RRH can simultaneously transmit pilots on the same pilot dimension (and thus interfering with one another). Each RRH performs rudimentary processing of the pilot observations in "sectors". In a sector, the RRH is able to resolve a scheduled user's channel when that user is determined to be the only one among the scheduled users (on the same pilot dimension) with significant received power in the sector. Subsequently, only the subset of scheduled users whose channels are resolved in at least one sector can be served by the system. We consider a spatially consistent evaluation of the area multiplexing gains by means of a Poisson Point Process (PPP) problem formulation where RRHs, blockers, scatterers and scheduled user terminals are all PPPs with individual intensities. Also, we study directional training at the user terminals. Our simulations suggest that, by controlling the intensity of the scheduled user PPP and the user-pilot beam-width, many fold improvements can be expected in area multiplexing gains with respect to conventional spatial pilot reuse systems.

cs.IT↗