arXiv subjects

Cheng Wang

Publications and source records attributed to Cheng Wang.

At least 37 records · Page 2Linked to original sources

arXiv2026

Regional Frequency Constrained Dispatch Method Considering Spatial-joint Stochastic Disturbances and Contingencies

The increasing penetration of renewable energy challenges frequency stability due to high variability and declining inertia. Traditional frequency security constrained dispatch methods fail to capture regional frequency heterogeneity and spatially correlated stochastic disturbances, resulting in inaccurate frequency security enforcement. To address this, a regional frequency constrained dispatch method is proposed, considering the spatially joint stochastic disturbances and contingencies. Firstly, a multi-regional frequency response model is constructed, incorporating the Vine-Copula based characterization of regional stochastic disturbances and regional frequency support. Then, a progressive latent-bottleneck physics-informed neural network is applied to characterize differential frequency nadir terms and regional frequency support integral terms via an encoder-decoder architecture, which enables optimization compatible expressions of system frequency dynamics. Finally, a day ahead dispatch model is developed in which regional stochastic frequency constraints are embedded using a CVaR-based formulation. A case study on the IEEE 118-bus system shows that the proposed method outperforms the unified center of inertia embedded approach in mitigating regional frequency violations, with the regional frequency nadir and RoCoF improved by 32.76% and 2.06%, respectively.

eess.SY↗

arXiv2026

DRIP-R: A Benchmark for Decision-Making and Reasoning Under Real-World Policy Ambiguity in the Retail Domain

LLM-based agents are increasingly deployed for routine but consequential tasks in real-world domains, where their behavior is governed by inherently ambiguous domain policies that admit multiple valid interpretations. Despite the prevalence of such ambiguities in practice, existing agent benchmarks largely assume unambiguous, well-specified policies, leaving a critical evaluation gap. We introduce DRIP-R, a benchmark that systematically exploits real-world retail policy ambiguities to construct scenarios in which no single correct resolution exists. DRIP-R comprises a curated set of policy-ambiguous return scenarios paired with a realistic customer personas, a full-duplex conversational simulation with tool-calling capabilities and a multi-judge evaluation framework covering policy adherence, dialogue quality, behavioral alignment, and resolution quality. Our experiments show that frontier models fundamentally disagree on identical policy-ambiguous scenarios, confirming that ambiguity poses a genuine and systematic challenge to LLM decision-making.

cs.CL↗

arXiv2026

Phase transition of Schott's statistic for high-dimensional heavy-tailed data

Consider Schott's statistic (Schott, 2005) defined as the squared Frobenius norm of the sample correlation matrix for data from $α$-regularly varying populations. We investigate its asymptotic distribution in a general framework characterized by data dimension p, sample size n, and regularly varying coefficients $α$. In particular, we identify a phase transition phenomenon in the asymptotic behavior. For light-tailed populations ($α> 3$), we revisit the $α$-free asymptotic distribution but relax the constraint on the ratio of $p/n$. For heavy-tailed populations ($α< 3$), we derive a new asymptotic normal distribution whose variance explicitly depends on $α$. We also propose a consistent estimator for the asymptotic variance such that the standardized Schott's test statistic remains applicable for unknown location parameters and all $α> 0$.

math.ST↗

arXiv2026

A linear mass-lumped finite element method for the Landau-Lifshitz-Gilbert equation: unconditional energy dissipation and length preservation

We develop a linear, unconditionally energy-dissipative, mass-lumped finite element method for the highly nonlinear Landau--Lifshitz--Gilbert (LLG) equation on quasi-uniform triangular meshes. The method is built on a projection strategy for enforcing the nonconvex pointwise constraint $|\mathbf{m}| = 1$, whose simultaneous preservation with unconditional energy stability remains challenging for standard finite element discretizations. The key innovation is a unified hybrid finite element-finite difference framework that underlies both the design and the analysis of the proposed method. In the scheme construction, we exploit the weak formulation and nodal structure of mass-lumped finite element method, while incorporating suitable interpolation operators and a node-wise length-preserving mechanism inspired by finite difference discretizations. This combination yields a linear scheme that preserves the node-wise unit-length constraint and satisfies a discrete energy dissipation law. The same hybrid framework also plays a central role in the error analysis, where the weak formulation and quasi-uniform mesh structure of finite elements are combined with interpolation-based and nodewise finite difference method to control the strongly nonlinear damping term and to establish an optimal-order error estimate. More importantly, the proposed method provides a unified framework that systematically integrates the geometric flexibility of finite element method with the pointwise constraint-preserving property of finite difference method, and thus offers a general strategy for designing and analyzing structure-preserving discretizations of constrained dissipative systems. Numerical experiments, including a classical blow-up simulation, confirm the predicted accuracy, energy dissipation, and robustness of the method.

math.NA↗

arXiv2026

Stability and error analysis of fully discrete original energy-dissipative and length-preserving scheme for the Landau-Lifshitz-Gilbert equation

The Landau-Lifshitz-Gilbert (LLG) equation, regarded as a gradient flow with manifold constraint, is the fundamental model describing magnetization dynamics in ferromagnetic materials. It is well known that the normalized tangent plane method is able to simultaneously achieve the non-convex manifold constraint and original energy dissipation. However, the associated computational cost of this numerical approach is exceedingly high. By contrast, the projection method is more straightforward to implement, while it often compromises the inherent energy dissipative property of the continuous model, and the error analysis turns out to be even more challenging. In this work, we first construct a linear and fully discrete finite difference numerical scheme, based on the projection method for the LLG equation, which is capable of simultaneously preserving the non-convex manifold constraint $|\mathbf{m}| = 1$ and an unconditional original energy dissipation. In the error analysis, the classical theoretical technique becomes ineffective, due to the presence of the nonlinear Laplacian term, which in turn poses a significant challenge. To overcome this subtle difficulty, we carefully rewrite the numerical method in an equivalent weak form, in which a point-wise length preserving feature of the numerical solution plays an essential role. As a result of these estimates in the reformulated weak form, an optimal convergence rate could be theoretically established. In our knowledge, this numerical method is the first linear algorithm that preserves the following combined theoretical properties: (i) point-wise length preservation, (ii) unconditional original energy dissipation, (iii) a theoretical justification of convergence analysis and optimal rate error estimate.

math.NA↗

arXiv2026

Volumetric Radiology AI in the Era of Multimodal Large Language Models

Advances in multimodal large language models (MLLMs) are extending radiological artificial intelligence (AI) beyond task-specific image analysis toward multimodal understanding and reasoning. Volumetric radiology, however, presents a fundamental representational mismatch: clinical interpretation often requires full-volume spatial context and acquisition-dependent quantitative information, whereas current MLLMs are commonly conditioned on selected two-dimensional (2D) images, compressed visual representations, or report-derived text. Reliable volumetric radiology AI therefore requires representations that preserve task-relevant three-dimensional (3D) information and systems that can access, verify, and integrate this information across clinical workflows. In this Review, we examine more than 200 publications through July 2026. We organize the literature around volumetric representation and multimodal understanding at the model level, agentic orchestration at the system level, and their links to clinical applications and evaluation. We review volumetric foundation models, language alignment and compression strategies, and agentic systems that extend MLLMs through planning, tools, memory, and workflow interaction. We distinguish settings in which selected 2D views or report-mediated reasoning may suffice from those that warrant native volumetric modeling. We also introduce a Claim-Design-Validation framework to assess whether technical, workflow, and clinical claims are matched by appropriate design and validation. Across the literature, native volumetric modeling and agentic capabilities depend on the spatial, quantitative, contextual, and workflow requirements of the intended task. Clinical credibility requires faithful volumetric representation, traceable system behavior, claim-aligned validation, and clearly defined human oversight in realistic workflows.

cs.AI↗

arXiv2026

Fiber Nonlinearity Compensation of Coherent Signals Using Deep Photonic Reservoir Computer

Photonic reservoir computer (PRC) is a promising optical computing framework for high-speed optical signal processing, and various reports have shown its functionality of linear equalization for intensity-modulation direct-detection communication links. However, coherent communication links suffer more from nonlinear impairment, whereas its nonlinear equalization is very challenging. Here we demonstrate the nonlinear equalization of coherent 16-level quadrature amplitude modulation (16-QAM) signals using a deep PRC in experiment. The deep PRC consists of cascading injection-locked semiconductor lasers with optical feedback loops. For 16-QAM signals with a transmission rate of 240 Gbps and a launch power of 12 dBm, the single-channel PRC with 3 hidden layers raises the Q factor by as high as 0.58 dB, while the dual-channel PRC with 2 hidden layers raises the Q factor by 0.55 dB. In addition, we prove that the deep PRC is able to equalize 16-QAM signals of different launch powers and transmission distances.

physics.optics↗

arXiv2026

MotionMAR: Multi-scale Auto-Regressive Human Motion Reconstruction from Sparse Observations

Human motion follows a temporal hierarchical structure, transitioning from low-frequency global trajectories to high-frequency details. Inspired by the success of multi-level autoregressive models in computer vision, we propose MotionMAR, a coarse-to-fine framework for motion reconstruction from sparse observations. It first estimates the global trajectory of human motion and then gradually refines the temporal details. This architecture consists of four integrated components. The Temporal Multi-scale Tokenization (TMT) VQ-VAE encodes the data at multiple temporal resolutions, separating semantic motion from minor jitters. The Motion Autoregressive Network (MAN) operates in this latent space, predicting motion across scales. It first establishes the global structure through coarse indices and then generates finer indices to recover specific details. Meanwhile, the Scale-Aware Control (SAC) module integrates sparse tracking data to ensure the generated output aligns with actual observations. The Motion Refinement Network (MRN) subsequently smooths consecutive poses and eliminates quantization artifacts. Experiments show that MotionMAR achieves state-of-the-art accuracy on the AMASS dataset, providing a reliable and structure-aware approach for motion reconstruction. The source code is publicly available at http://www.lidarhumanmotion.net/motionmar/.

cs.CV↗

arXiv2026

LightCal: Lightweight Optical-Pulse Bootstrap Calibration for Crystal-Free BLE Radios

Crystal-free Bluetooth Low Energy (BLE) radios remove the off-chip high-frequency crystal oscillator and can therefore reduce the cost, size, and integration complexity of Internet of Things (IoT) nodes. However, they face a fundamental bootstrap problem: before a node can communicate over RF, it must first obtain a sufficiently accurate carrier-frequency reference. Existing approaches typically rely on RF beacons, already-connected nodes, or search-based channel acquisition, which can incur long startup latency and provide limited feedback when the initial carrier offset is large. This paper presents LightCal, a lightweight bootstrap calibration method that uses periodic optical pulses as an external timing reference for crystal-free BLE radios. LightCal is designed for highly resource-constrained platforms and requires only simple optical pulse reception. We implement LightCal on scum, a crystal-free IoT platform and use a commercial HTC Lighthouse V1 base station as an unmodified off-the-shelf optical pulse source. Experimental results show that pulse accumulation substantially improves the effective timing stability of Lighthouse sync pulses on SC$μ$M and enables practical BLE bootstrap calibration. In the current scum prototype, optical calibration brings the RF carrier into a bounded residual-error range, and the remaining offset is resolved by a narrow transmit-time fine sweep. The results demonstrate that optical pulse references can provide a practical pre-RF bootstrap calibration path for crystal-free and highly integrated IoT platforms.

cs.NI↗

arXiv2026

Fostering cultural change in research through innovative knowledge sharing, evaluation, and community engagement strategies

Bringing together researchers, funders, industry partners, and publishers from 14 countries across 5 continents, we advance the debate around open-science, assessment and learning. We introduce an integrative "open knowledge system" framework linking knowledge production, validation, assessment, and reuse into one ecosystem view, and translate it into actionable recommendations for each stakeholder. Shifting focus to modular, machine-readable knowledge objects, these recommendations are intended to help diagnose misaligned incentives and guide reforms that properly value all scientific contributions.

cs.SI↗

arXiv2026

Bifrost: Empowering Pretrained Language Model with Fallibility Representation for Log-Based Fault Diagnosis

Log-based fault diagnosis is crucial for runtime debugging and maintenance. Existing fault diagnosis methods use language models pre-trained on natural language (PLMs) for log representation. However, system faults are reflected in the multi-level structure of system logs. PLMs pre-trained on natural language struggle to comprehensively capture multi-level fault information, failing to meet the requirements of fault diagnosis. We refer to this information as fallibility representations. To address this problem, we propose a novel log representation learning method, Bifrost. It draws inspiration from the log analysis experience of Site Reliability Engineers and meticulously designs strategies based on self-supervised contrastive learning to learn the fallibility representations of logs. Across three public systems and one industrial ML-as-a-Service system, the log representations produced by Bifrost outperform existing PLMs by average margins of 9.83% in F1 for anomaly detection, 18.28% in HR@k for root cause localization, and 20.88% in Macro-F1 for fault identification.

cs.SE↗

arXiv2026

CVKD-UDA: Cross-View Knowledge Distillation for 3D Unsupervised Domain Adaptive Segmentation

3D unsupervised domain adaptive (UDA) segmentation mitigates the high cost of manual annotations of the new domain data. Self-training has emerged as the dominant approach in this area, where its success heavily depends on a well-initialized warm-up model to generate reliable pseudo labels. However, existing methods often depend on source supervision or output-level adversarial alignment to obtain the warm-up model, which suffer from limited generalization and training instability due to the large domain gap between domains. Constructing domain-similar representations is an effective way to bridge this gap. In this work, we propose CVKD-UDA, which revisits voxel size as a core design factor to construct domain-similar representations and leverages cross-view complementary cues to balance transferability and discriminability of the warm-up model. First, we generate two complementary views by varying voxel sizes and introduce a cross-view knowledge distillation (CVKD) to enhance generalization and target perception of the model. Second, to balance transferability and discriminability, we design a lightweight Decouple-Adapter and an auxiliary imitation classifier to decouple cross-view knowledge transfer. Extensive experiments on two benchmarks demonstrate that CVKD-UDA effectively improves the performance of self-training methods and provides a new perspective for 3D UDA segmentation. Our code will be available at GitHub.

cs.CV↗

arXiv2026

Inverse-designed photonic interfaces beyond eigenmode expansion limits

Photonic integrated circuits (PICs) enable optical systems with dramatically increased performance, cost-effectiveness, and scalability through enhanced light-matter interactions, high-density integration, and mass production. Due to the significant mode mismatch between various integrated photonic platforms and optical fibers, spot-size conversion interfaces with low-loss, compact footprint, and high manufacturability are essential. Conventional spot-size converters based on intuitive designs often require multi-layer tapering structures and tiny waveguide tips to adiabatically expand the eigenmodes. These rigid design constraints commonly lead to large device footprints and the requirements of multiple high-precision lithography steps. In this paper, we overcome these limitations using inverse design methods, which optimize the coupling efficiency over a large parameter space beyond traditional eigenmode evolution limits. Specifically, we demonstrate efficient and ultra-compact photonic interfaces on the thin-film lithium niobate (TFLN) platform, where the partially etched rib waveguides and non-vertical sidewalls have previously hindered the achievement of low-loss waveguide tapers in single-layer configurations. Our inverse-designed photonic structures achieve simulated and experimentally measured coupling efficiencies as low as 1 dB and 3 dB per facet between TFLN waveguides and lensed/ultra-high numerical aperture (UHNA) fiber, with broad 1-dB bandwidths exceeding 120 nm. The inverse-designed interfaces are highly compatible with standard TFLN PIC components and require only a single high-resolution lithography step. More importantly, the design concept transcends traditional eigenmode evolution theories and is broadly applicable to a variety of material platforms and application scenarios.

physics.optics↗

arXiv2026

Stagnant Neuron: Towards Understanding the Plasticity Loss in Multi-Agent Reinforcement Learning Value Factorization Methods

Multi-Agent Reinforcement Learning (MARL) value factorization methods can suffer from a loss of plasticity, gradually failing to adapt when transferring to new task instances. We trace this issue to stagnant neurons, units whose gradient updates become negligibly small relative to their weights, thereby hindering learning. While existing plasticity injection methods exist, they prove ineffective for such neurons. To address this, we propose Knowledge-retentive Neuron-level PlastIcity Focusing InjEction (KNIFE), a novel method that directly targets stagnant neurons. KNIFE replaces each stagnant neuron with a composite unit comprising three specialized components: a frozen knowledge neuron to preserve acquired knowledge, a re-initialized active neuron to restore learning capacity, and a compensation neuron to ensure the combined output matches the original, thus maintaining previous learned cooperation knowledge. Extensive experiments on SMACv2, predator-prey, and matrix games demonstrate that KNIFE significantly outperforms state-of-the-art plasticity injection methods.

cs.LG↗

arXiv2026

NeuroClaw Technical Report

Agentic artificial intelligence systems promise to accelerate scientific workflows, but neuroimaging poses unique challenges: heterogeneous modalities (sMRI, fMRI, dMRI, EEG), long multi-stage pipelines, and persistent reproducibility risks. To address this gap, we present NeuroClaw, a domain-specialized multi-agent research assistant for executable and reproducible neuroimaging research. NeuroClaw operates directly on raw neuroimaging data across formats and modalities, grounding decisions in dataset semantics and BIDS metadata so users need not prepare curated inputs or bespoke model code. The platform combines harness engineering with end-to-end environment management, including pinned Python environments, Docker support, automated installers for common neuroimaging tools, and GPU configuration. In practice, this layer emphasizes checkpointing, post-execution verification, structured audit traces, and controlled runtime setup, making toolchains more transparent while improving reproducibility and auditability. A three-tier skill/agent hierarchy separates user-facing interaction, high-level orchestration, and low-level tool skills to decompose complex workflows into safe, reusable units. Alongside the NeuroClaw framework, we introduce NeuroBench, a system-level benchmark for executability, artifact validity, and reproducibility readiness. Across multiple multimodal LLMs, NeuroClaw-enabled runs yield consistent and substantial score improvements compared with direct agent invocation. Project homepage: https://cuhk-aim-group.github.io/NeuroClaw/index.html

cs.CV↗

arXiv2026

Integrated Terahertz Photonic Receiving Frontend with Link Noise Outperforming Electronics

Terahertz technology is a key enabler for sixth-generation (6G) wireless networks, yet its application is constrained by increasingly severe free-space loss at high frequencies. To efficiently retrieve weak signals at the receiving end, a compact frontend that features both a high-gain antenna and a low-noise signal-detection chain is critical. Current transistor-based THz electronic frontends face significant challenges in meeting these demands because both on-chip antenna efficiency and transistor noise performance degrade rapidly when approaching their cut-off frequencies. Photonic technology provides an alternative solution to circumvent the transistor bandwidth limit, yet most microwave photonic links to date exhibit noise performance substantially worse than state-of-the-art electronics. Here, we demonstrate low-noise integrated THz photonic frontends that deliver undegraded link noise performance across three major THz windows from 140 to 450 GHz, and outperform electronic frontends in the upper two windows. We achieve this through co-design of high-gain on-chip THz antenna array and broadband THz-optic modulator on a single thin-film lithium niobate (TFLN) chip, leading to distributed reception of free-space THz signals and continuous coherent build-up of the THz-optic conversion process with unprecedented efficiency. Combined with an efficient heterodyne detection chain, our integrated frontends exhibit effective isotropic noise figures of 13.6 and 16.2 dB at 250 and 450 GHz, respectively, both setting new benchmarks in their respective bands. We further demonstrate 6G-oriented multi-link communication up to 20 Git/s. Our integrated frontends represent a significant step towards compact, cost-effective and energy-efficient THz wireless systems in 6G and beyond.

physics.optics↗

arXiv2026

Multi-channel high-speed flip-chip packaging platform for thin-film lithium niobate photonic circuits

To address the urgent need for multi-channel high-speed electrical interfacing of thin-film lithium niobate (TFLN) photonic circuits, we realize a flip-chip packaging platform capable of simultaneously delivering 13 high-speed and 32 low-speed electronic signals to a centimeter-sized TFLN chip. The platform exhibits low flip-chip bonding loss and low inter-channel crosstalk over a broad bandwidth up to 50 GHz. Leveraging this packaging platform, we demonstrate high-speed electrical interfacing with two proof-of-concept TFLN photonic circuits, namely a 2x8 optical switch and an electro-optic comb-based transmitter. The switch achieves arbitrary 8-channel routing with ~3 dB insertion loss, < -20 dB crosstalk, and an equipment-limited switching time of <= 34 ps. The transmitter circuit includes a 50 GHz electro-optic comb generator with 2.8-dB flatness, a tunable microring to arbitrarily filter one comb line, and a modulator for data transmission at 20 Gbit/s. The packaging platform could significantly advance large-scale TFLN circuits in optical communications, microwave photonics, and photonic computing.

physics.optics↗

arXiv2026

A Generalizable Light Transport 3D Embedding for Global Illumination

Global illumination (GI) is essential for realistic rendering but remains computationally expensive due to the complexity of simulating indirect light transport. Recent neural methods have mainly relied on per-scene optimization, sometimes extended to handle changes in camera or geometry. Efforts toward cross-scene generalization have largely stayed in 2D screen space, such as neural denoising or G-buffer based GI prediction, which often suffer from view inconsistency and limited spatial understanding. We propose a generalizable 3D light transport embedding that approximates global illumination directly from 3D scene configurations, without using rasterized or path-traced cues. Each scene is represented as a point cloud with geometric and material features. A scalable transformer models global point-to-point interactions to encode these features into neural primitives. At render time, each query point retrieves nearby primitives via nearest-neighbor search and aggregates their latent features through cross-attention to predict the desired rendering quantity. We demonstrate results on diffuse global illumination prediction across diverse indoor scenes with varying layouts, geometry, and materials. The embedding trained for irradiance estimation can be quickly adapted to new rendering tasks with limited fine-tuning. We also present preliminary results for spatial-directional radiance field estimation for glossy materials and show how the normalized field can accelerate unbiased path guiding. This approach highlights a path toward integrating learned priors into rendering pipelines without explicit ray-traced illumination cues.

cs.GR↗