arXiv subjects

Chao Liu

Publications and source records attributed to Chao Liu.

At least 91 records · Page 5Linked to original sources

arXiv2026

Decision-Aware Semantic State Synchronization in Compute-First Networking

In Compute-First Networking (CFN), an Access Point (AP) makes task offloading decisions based on resource state information reported by a Service Node (SN). A fundamental challenge arises from the trade-off between update overhead and decision accuracy: Frequent state updates consume limited network resources, while infrequent updates lead to stale state views and degraded task performance, especially under high system load. Existing approaches based on periodic updates or Age of Information (AoI) mainly focus on temporal freshness and often overlook whether a state change is actually relevant to offloading decisions. This paper proposes SenseCFN, a decision-aware state synchronization framework for CFN. Instead of synchronizing raw resource states, SenseCFN focuses on identifying state changes that are likely to alter offloading decisions. To this end, we introduce a lightweight semantic state representation that captures decision-relevant system characteristics, along with a Semantic Deviation Index (SDI) to quantify the impact of state shifts on decision outcomes. Based on SDI, the SN triggers updates only when significant decision-impacting changes are detected. Meanwhile, the AP performs offloading decisions using cached semantic states with explicit awareness of potential staleness. The update and offloading policies are jointly optimized using a centralized training with distributed execution (CTDE) approach. Simulation results show that SenseCFN maintains a task success rate of up to 99.6% in saturation-prone scenarios, outperforming baseline methods by more than 25%, while reducing status update frequency by approximately 70% to 96%. These results indicate that decision-aware state synchronization provides an effective and practical alternative to purely time-based update strategies in CFN.

cs.NI↗

arXiv2026

Evidence-Grounded Multi-Agent Planning Support for Urban Carbon Governance via RAG

Urban carbon governance requires planners to integrate heterogeneous evidence -- emission inventories, statistical yearbooks, policy texts, technical measures, and academic findings -- into actionable, cross-departmental plans. Large Language Models (LLMs) can assist planning workflows, yet their factual reliability and evidential traceability remain critical barriers in professional use. This paper presents an evidence-grounded multi-agent planning support system for urban carbon governance built upon standard text-based Retrieval-Augmented Generation (RAG) (without GraphRAG). We align the system with the typical planning workflow by decomposing tasks into four specialized agents: (i) evidence Q\&A for fact checking and compliance queries, (ii) emission status assessment for diagnostic analysis, (iii) planning recommendation for generating multi-sector governance pathways, and (iv) report integration for producing planning-style deliverables. We evaluate the system in two task families: factual retrieval and comprehensive planning generation. On factual retrieval tasks, introducing RAG increases the average score from below 6 to above 90, and dramatically improves key-field extraction (e.g., region and numeric values near 100\% detection). A real-city case study (Ningbo, China) demonstrates end-to-end report generation with strong relevance, coverage, and coherence in expert review, while also highlighting boundary inconsistencies across data sources as a practical limitation.

cs.CY↗

arXiv2025

AKG kernel Agent: A Multi-Agent Framework for Cross-Platform Kernel Synthesis

Modern AI models demand high-performance computation kernels. The growing complexity of LLMs, multimodal architectures, and recommendation systems, combined with techniques like sparsity and quantization, creates significant computational challenges. Moreover, frequent hardware updates and diverse chip architectures further complicate this landscape, requiring tailored kernel implementations for each platform. However, manual optimization cannot keep pace with these demands, creating a critical bottleneck in AI system development. Recent advances in LLM code generation capabilities have opened new possibilities for automating kernel development. In this work, we propose AKG kernel agent (AI-driven Kernel Generator), a multi-agent system that automates kernel generation, migration, and performance tuning. AKG kernel agent is designed to support multiple domain-specific languages (DSLs), including Triton, TileLang, CPP, and CUDA-C, enabling it to target different hardware backends while maintaining correctness and portability. The system's modular design allows rapid integration of new DSLs and hardware targets. When evaluated on KernelBench using Triton DSL across GPU and NPU backends, AKG kernel agent achieves an average speedup of 1.46$\times$ over PyTorch Eager baselines implementations, demonstrating its effectiveness in accelerating kernel development for modern AI workloads.

cs.AI↗

arXiv2025

Planet Across Space and Time (PAST). VII. The origin and tidal evolution of hot Jupiters constrained by a broken age-frequency relation

The discovery of hot Jupiters has challenged the classical planet formation theory. Although various formation mechanisms have been proposed, the dominant channel and relative contributions remain unclear. Furthermore, hot Jupiters offer a unique opportunity to test tidal theory and measure the fundamental tidal quality factor, which is yet to be well-constrained. In this work, based on a hot Jupiter sample around single Sun-like stars with kinematic properties, {we find that the declining trend of their frequency is broken with a ridge at about 2 Gyr, providing direct evidence that hot Jupiters are formed with multiple origins of different timescales. By fitting with the theoretical expectations, we provide a constraint of tidal factor for Sun-like stars, which aligns well with the detected number of hot Jupiters with orbital decay. Moreover, we simultaneously constrain the relative importance of different channels: although the majority of hot Jupiters are formed early, within several tenths of Gyr via 'Early' models (e.g., in-situ formation, disk migration, planet-planet scattering and Kozai-Lidov interaction), a significant portion (about 40%) should be formed late on a relatively long timescale extending up to several Gyr mainly via the secular chaos mechanism, further supported by the obliquity distribution of 'late-arrived' hot Jupiters. Our findings provide a unified framework that reconciles hot Jupiter demographics and long-term evolution with multichannel formation.

astro-ph.EP↗

arXiv2025

AndesVL Technical Report: An Efficient Mobile-side Multimodal Large Language Model

In recent years, while cloud-based MLLMs such as QwenVL, InternVL, GPT-4o, Gemini, and Claude Sonnet have demonstrated outstanding performance with enormous model sizes reaching hundreds of billions of parameters, they significantly surpass the limitations in memory, power consumption, and computing capacity of edge devices such as mobile phones. This paper introduces AndesVL, a suite of mobile-side MLLMs with 0.6B to 4B parameters based on Qwen3's LLM and various visual encoders. We comprehensively outline the model architectures, training pipeline, and training data of AndesVL, which achieves first-tier performance across a wide range of open-source benchmarks, including fields such as text-rich image understanding, reasoning and math, multi-image comprehension, general VQA, hallucination mitigation, multilingual understanding, and GUI-related tasks when compared with state-of-the-art models of a similar scale. Furthermore, we introduce a 1+N LoRA architecture alongside a Quantization-Aware LoRA Fine-Tuning (QALFT) framework to facilitate efficient task adaptation and model compression during mobile-side deployment of AndesVL. Moreover, utilizing our cache eviction algorithm -- OKV -- along with customized speculative decoding and compression strategies, we achieve a 6.7x peak decoding speedup ratio, up to 30.9% memory reduction, and 1.8 bits-per-weight when deploying AndesVL-4B on MediaTek Dimensity 9500 chips. We release all models on https://huggingface.co/OPPOer.

cs.CV↗

arXiv2025

Existence and bounds of nonlinear singularity-free cosmological solutions in a string-inspired gravity

We provide a rigorous proof for the existence of homogeneous, isotropic and globally singularity-free cosmological solutions in Einstein-dilaton-Gauss-Bonnet (EdGB) gravity with exponential coupling. While numerical studies suggested such solutions exist, a formal proof remained elusive. By employing a novel ``power identity method'' and overcoming significant challenges posed by the strong nonlinearities of the exponential coupling, which are not present in the quadratic coupling analyzed in our companion paper \cite{he2025proofssingularityfreesolutionsscalarization}, we establish a FLRW solution valid for all time $t\in(-\infty,+\infty)$, where the Hubble parameter remains positive and vanishes asymptotically, while the scalar field evolves monotonically. This result align with numerical simulations and offer a firm mathematical foundation for singularity-free cosmology in a string-inspired setting.

math.AP↗

arXiv2025

FANoise: Singular Value-Adaptive Noise Modulation for Robust Multimodal Representation Learning

Representation learning is fundamental to modern machine learning, powering applications such as text retrieval and multimodal understanding. However, learning robust and generalizable representations remains challenging. While prior work has demonstrated that active noise injection, a form of data augmentation, can enhance encoding performance, most existing methods rely on heuristic or static noise, overlooking the dynamic nature of feature distributions during training. In this work, we systematically study the role of noise in representation learning from both gradient-based and feature distribution perspectives, using InfoNCE loss as a representative example. Focusing on multimodal representation learning, we propose FANoise, a novel feature-adaptive noise injection strategy. By leveraging the dynamics of contrastive learning, FANoise effectively mitigates the negative impacts of noise while preserving its benefits. Under this theoretically grounded framework, comprehensive experiments demonstrate that FANoise consistently improves overall performance on multimodal tasks across various base VLM models.

cs.LG↗

arXiv2025

Stellar Parameters of BOSS M dwarfs in SDSS-V DR19

We utilized the Stellar LAbel Machine (SLAM), a data-driven model based on Support Vector Regression, to derive stellar parameters ([Fe/H], $T_{\rm eff}$, and $\log{g}$) for SDSS-V M dwarfs using low-resolution optical spectra (R$\sim$2000) obtained with the BOSS spectrographs. These parameters are calibrated using LAMOST F, G or K dwarf companions ([Fe/H]), and APOGEE Net ($T_{\rm eff}$ and $\log{g}$), respectively. Comparisons of SLAM predicted [Fe/H] values between two components of M+M dwarfs wide binaries show no bias but with a scatter of 0.11 dex. Further comparisons with two other works, which also calibrated the [Fe/H] of M dwarfs by using the F/G/K companions, reveal biases of -0.06$\pm$0.16 dex and 0.02$\pm$0.14 dex, respectively. The SLAM-derived effective temperatures agree well with the temperature which is calibrated by using interferometric angular diameters (bias: -27$\pm$92 K) and those of the LAMOST (bias: -34$\pm$65 K), but are systematically lower than those from an empirical relationship between the color index and $T_{\rm eff}$ by 146$\pm$45 K. The SLAM surface gravity aligns well with those of LAMOST (bias: -0.01$\pm$0.07 dex) and those derived from the stellar mass and radius (bias: -0.04$\pm$0.09 dex). Finally, we investigated a bias in [Fe/H] between SLAM and APOGEE ASPCAP. It depends on ASPCAP's [Fe/H] and $T_{\rm eff}$, we provide an equation to correct the ASPCAP metallicities.

astro-ph.SR↗

arXiv2025

The origin of B-type runaway stars based on kinematics

Runaway stars depart their birthplaces with high peculiar velocities. Two mechanisms are commonly invoked to explain their origin, the binary supernova scenario (BSS) and the dynamical ejection scenario (DES). Investigating the kinematic properties of runaway stars is key to understanding their origins.We intend to investigate the origins of 39 B-type runaway stars from LAMOST using orbital traceback analysis. From the catalog of LAMOST, we selected 39 B-type runaway stars and determined their spectral subtypes from key absorption lines. We then derived atmospheric parameters for each star using the Stellar Label Machine (SLAM), which is trained on TLUSTY synthetic spectra computed under the non-local thermodynamic equilibrium (NLTE) assumption. Using the derived atmospheric parameters as input, we estimated stellar masses and ages with a machine learning model trained on PARSEC evolutionary tracks. We finally performed orbital traceback with GALPY to analyze their origins. Through orbital traceback, we find that 29 stars have trajectories entirely within the Galactic disk, whereas 10 are disk-passing yet still trace back to the disk. Two stars have trajectories that intersect those of known clusters. Their orbits show similar morphologies in both the $X-Y$ and $R-Z$ planes, and their [M/H] values are comparable, suggesting possible cluster origins. However, definitive confirmation will require additional evidence. In addition, the $V_{\rm Sp} - v\sin{i}$ plane shows that runaway stars with low peculiar space velocities but high $v\sin{i}$ remain on the Galactic disk, whereas those with high peculiar space velocities but low $v\sin{i}$ pass through the disk, possibly reflecting two distinct origins.

astro-ph.SR↗

arXiv2025

Mock Observations for the CSST Mission: Main Surveys-the Slitless Spectroscopy Simulation

The China Space Station Telescope (CSST), slated to become China's largest space-based optical telescope in the coming decade, is designed to conduct wide-field sky surveys with high spatial resolution. Among its key observational modes, slitless spectral observation allows simultaneous imaging and spectral data acquisition over a wide field of view, offering significant advantages for astrophysical studies. Currently, the CSST is in the development phase and lacks real observational data. As a result, the development of its data processing pipeline and scientific pre-research must rely on the mock data generated through simulations. This work focuses on developing a simulation framework for the CSST slitless spectral imaging system, analyzing its spectral dispersing properties and structural design. Additionally, the detection performance of the slitless spectral system is assessed for various astrophysical targets. Simulation results demonstrate that nearly all 1st order spectra are accompanied by corresponding 0th order images, facilitating accurate source identification. Furthermore, the GI spectral band exhibits superior detection efficiency compared to the GV and GU bands, establishing it as the primary observational band for stellar and galactic studies. This work successfully develops a simulation framework for the CSST slitless spectroscopic equipment.

astro-ph.IM↗

arXiv2025

Mock Observations for the CSST Mission: Multi-Channel Imager--Instrument Simulation

The Chinese Space Station Survey Telescope (CSST), a two-meter aperture astronomical space telescope under China's manned space program, is equipped with multiple back-end scientific instruments. As an astronomical precision measurement module of the CSST, the Multi-Channel Imager (MCI) can cover a wide wavelength range from ultraviolet to near-infrared with three-color simultaneous high-precision photometry and imaging, which meets the scientific requirements for various fields. The diverse scientific objectives of MCI require not only a robust airborne platform, advanced optical systems, and observing facilities but also comprehensive software support for scientific operations and research. To this end, it is essential to develop realistic observational simulation software to thoroughly evaluate the MCI data stream and provide calibration tools for future scientific investigations. The MCI instrument simulation software will serve as a foundation for the development of the MCI data processing pipeline and will facilitate improvements in both hardware and software, as well as in the observational operation strategy, in alignment with the mission's scientific goals. In conclusion, we present a comprehensive overview of the MCI instrument simulation and some corresponding performances of the MCI data processing pipeline.

astro-ph.IM↗

arXiv2025

Mock Observations for the CSST Mission: Integral Field Spectrograph--Instrument Simulation

The Chinese Space Station Survey Telescope (CSST) is a next-generation Stage-IV facility renowned for its wide field of view, high image quality, and multi-band observational capabilities. Among the five instruments onboard the CSST, the Integral Field Spectrograph (IFS) offers the unique ability to simultaneously capture spatial and spectral information across a field of view of no less than $6^{''}\times6^{''}$. Key advantages of the IFS include a high spatial resolution of $0.2^{''}$ and a broad spectral coverage from 350 to 1000 nm, making it an ideal instrument for studying physical processes in the vicinity of supermassive black holes within galaxies. To more accurately assess the technical and scientific performance of the CSST-IFS, it is essential to develop a simulation tool that incorporates realistic effects from all optical components. Such a simulation will form an integral part of the CSST-IFS data and pipeline system, enabling the development of the data reduction pipeline well ahead of actual observations. This paper presents an end-to-end simulation workflow for the CSST-IFS, incorporating a wide range of instrumental effects that may influence its spectral and imaging performance. The simulation accounts for optical diffraction effects introduced by all components, such as image slicers and slit array, as well as sub-pixel effects from gratings. It also includes various detector noises, frame-shifting effects, and charge-transfer inefficiency. Real observational conditions--such as target Doppler shift, cosmic rays, and other in-orbit operational effects--are also considered. We describe the technical implementation of the simulation and present results that quantitatively characterize key instrument parameters.

astro-ph.IM↗

arXiv2025

Mock Observations for the CSST Mission: Main Surveys -- the Mock Catalogue

The Chinese Space Station Survey Telescope (CSST) is a flagship space mission, designed to carry out a large-area sky survey to explore the nature of dark matter and dark energy in the Universe. The onboard multi-band imaging and slitless spectroscopic modules will enable us to obtain photometric data for billions of galaxies and stars, as well as hundreds of millions of spectroscopic measurements, advancing various scientific analyses such as galaxy clustering and weak gravitational lensing. To support the image simulations for the main survey of the CSST mission, we present a mock catalogue of stars and galaxies. For stars, the mock catalogue is generated using either Galaxia or TRILEGAL, both of which provide a range of stellar properties to meet the requirements of CSST image simulations. For galaxies, we built a mock light-cone up to redshift z~3.5 from the cosmological Nbody simulation and populated the mock galaxy catalogue from the dark mater haloes using a semi-analytical galaxy formation model. We then performed a full-sky ray-tracing simulation of weak gravitational lensing to obtain lensing shear at the position of each galaxy in the light-cone. To support both multi-band imaging and slitless spectroscopic simulations, we computed the spectral energy distribution (SED) for each galaxy based on its star formation history using a supervised deep-learning model and determined the magnitudes in each band using the CSST throughputs. Finally, the properties of our mock galaxies include positions, redshifts, stellar masses, shapes, sizes, SEDs, lensing shears and magnifications. We have validated our mock catalogue against observational data and theoretical models, with results showing good overall agreement. The catalogue provides a flexible dataset for the development of CSST image processing and can support a wide range of cosmological analyses within the CSST mission.

astro-ph.IM↗

arXiv2025

Mock Observations for the CSST Mission: End-to-End Performance Modeling of Optical System

This study presents a comprehensive end-to-end simulation analysis of the optical imaging performance of the China Survey Space Telescope (CSST) under in-orbit conditions. An integrated system model incorporating five static and two dynamic error sub-models was established. Wavefront errors were calculated for each sub-model and compared to the integrated system error to quantify the individual contributions to image degradation. At the detector level, wavefront error, point spread function (PSF), and ellipticity were evaluated across the full field of view (FOV). The average radius of 80\% encircled energy (REE80) of the PSF under full-error conditions was determined for 25 field points, yielding a value of 0.114 arcseconds. Furthermore, the calculations indicate a correlation between the wavefront distribution and the ellipticity distribution within the optical system. By optimizing the wavefront distribution, it is possible to adjust the ellipticity distribution of the PSF across the full FOV. The end-to-end simulation approach adopted in this paper provides a theoretical foundation for improving the image quality in large-aperture, off-axis space telescopes.

astro-ph.IM↗

arXiv2025

The emergence of nonlinear Jeans-type instabilities for quasilinear wave equations. II: Generalizations

This work extends the previous work by the first author [arXiv:2409.02516] and [Math. Ann. 393 (2025), 317-363], analyzing the long-term behavior of solutions to a broader class of quasilinear wave equations with parameter $1<\mathsf{a}\leq30$ and $\frac{1}{3}\leq\mathsf{b}\leq\frac{2}{3}$: \begin{equation*} \partial^2_t \varrho- \biggl( \frac{ \mathsf{m}^2 (\partial_{t}\varrho )^2}{(1+\varrho )^2} + 4(\mathsf{k}-\mathsf{m}^2)(1+\varrho )\biggr) Δ\varrho = F(t,\varrho,\partial_μ \varrho) \end{equation*} where $F$ is given by \begin{equation*} F(t,\varrho,\partial_μ \varrho):= \mathsf{b} \varrho (1+ \varrho ) -(\mathsf{a}-1) \partial_{t}\varrho + \frac{4}{3} \frac{(\partial_{t}\varrho )^2}{1+\varrho } + \biggl(\mathsf{m}^2 \frac{ (\partial_{t}\varrho )^2}{(1+\varrho )^2} + 4(\mathsf{k}-\mathsf{m}^2) (1+\varrho ) \biggr) q^i \partial_{i}\varrho - \mathtt{K}^{ij} \partial_{i}\varrho\partial_{j}\varrho . \end{equation*} The results demonstrate that for this extensive family of quasilinear wave equations satisfying $1<\mathsf{a}\leq30$ and $\frac{1}{3}\leq\mathsf{b}\leq\frac{2}{3}$, self-increasing blowup solutions also exist, and self-increasing singularities emerge at certain future endpoints of null geodesics provided the inhomogeneous perturbations of data are sufficiently small.

math.AP↗

arXiv2025

The Initial mass function of field stars with mass $\leq$ 1 $M_{\odot}$ varies with metallicity

We investigated a volume-limited sample of LAMOST main-sequence stars with masses from 0.25 to 1 $M_{\odot}$ and distances of 150-350 pc to explore how the stellar initial mass function (IMF) varies with metallicity. We corrected the spectroscopic selection function by comparing the stellar number densities with the photometric ones at the same colour and magnitude. From these corrected number density distributions, we derived IMFs for each metallicity sub-samples. Fitting a broken power-law function in each IMF with a fixed break point at 0.525 $M_{\odot}$, we found the power-law indices increase with [Fe/H] for both mass regimes: $α_1$ (mass $\leq$ 0.525 $M_{\odot}$) rises from 0.54 $\pm$ 0.21 to 1.40 $\pm$ 0.07 and $α_2$ (mass>0.525 $M_{\odot}$) grows from 1.40 $\pm$ 0.16 to 1.86 $\pm$ 0.04 as [Fe/H] varies from -1 to +0.5 dex. It demonstrates that low-mass stars make up a larger fraction in metal-rich environments than in metal-poor ones. We performed simulations to assess the impact of unresolved binaries on the IMF power-law indices. After correction, the binary-adjusted $α$ values retained a similar metallicity-dependent trend. Furthermore, by examining the IMF of the aggregate sample, we found the corrected indices ($α_{\rm{1,corr}} = 1.48 \pm 0.03$ , $α_{\rm{2,corr}} = 2.17 \pm 0.03$) are consistent with Kroupa's IMF values ($α_1 = 1.3 \pm 0.5$ and $α_2 = 2.3 \pm 0.3$). Finally, we verified the robustness of our results by testing different break points and mass bin sizes, confirming that the IMF's dependence on [Fe/H] remains consistent.

astro-ph.SR↗

arXiv2025

NIR-II Fluorescence Project Technology for Augmented Reality Surgical Navigation

NIR-II fluorescence imaging provides superior tissue penetration and clarity, yet its clinical use in surgical navigation is hindered by a critical workflow issue. Surgeons must divert their attention between the operative field and external monitors, increasing cognitive load and disrupting procedures. Current strategies have failed to resolve this fundamental problem. Here, we developed a co-axial NIR-II fluorescence projection navigation system to enable real-time, in situ visualization. This system creates an intraoperative augmented reality by directly projecting high-precision, pseudocolored fluorescence images onto the surgical field, spatially integrating functional signals with patient anatomy. Validated through in vitro, in vivo, and clinical patient studies, our system eliminates visual field switching, reduces intraoperative distraction, and preserves natural stereoscopic vision. This approach represents a paradigm shift toward a more coherent, efficient, and ergonomically optimized optical imaging modality for surgical navigation.

physics.optics↗

arXiv2025

A Systematic Literature Review of Code Hallucinations in LLMs: Characterization, Mitigation Methods, Challenges, and Future Directions for Reliable AI

Model hallucination is one of the most critical challenges faced by Large Language Models (LLMs), especially in high-stakes code intelligence tasks. As LLMs become increasingly integrated into software engineering tasks, understanding and mitigating hallucination in code becomes essential. In this survey, we provide a systematic review of hallucination phenomena in code-oriented LLMs from four key perspectives. First, we begin by surveying 60 papers to define hallucination in the context of code and summarize its primary causes, such as data noise, exposure bias, and insufficient semantic grounding, while also tracing recent trends in literature across natural language processing (NLP) and software engineering communities. Second, we review model hallucination surveys in a broader span and summarize representative hallucination mitigation strategies, such as knowledge-enhanced generation, constrained decoding, and post-editing. Third, we review approaches targeted for code intelligence and highlight code-specific challenges that aggravate hallucination, including syntax sensitivity, strict type systems, and dependence on external libraries. Meanwhile, we analyze how emerging code intelligence tasks, e.g., program analysis, symbolic execution, and unit testing, are utilized to detect and mitigate hallucinations. Fourth, we summarize current evaluation benchmarks, ranging from static metrics to dynamic checks, e.g., compilation and execution correctness, and emphasize the need for hallucination-oriented benchmarks.

cs.SE↗