arXiv subjects

C. Thomas

Publications and source records attributed to C. Thomas.

At least 19 recordsLinked to original sources

arXiv2026

Hot Spot Evolution Measured by High-Resolution X-Ray Spectroscopy at the National Ignition Facility

Evolution of the hot spot plasma conditions was measured using high-resolution x-ray spectroscopy at the National Ignition Facility (NIF). The capsules were filled with DD gas with trace levels of Kr, and had either a high-density-carbon (HDC) ablator or a tungsten (W)-doped HDC ablator. Time-resolved measurement of the Kr He$\beta$ spectra, absolutely calibrated by a simultaneous time-integrated measurement, allows inference of the electron density and temperature through observing Stark broadening and the relative intensities of dielectronic satellites. By matching the calculated hot spot emission using a collisional-radiative code to experimental observations, the hot spot size and areal density are determined. These advanced spectroscopy techniques further reveal the effect of W dopant in the ablator on the hot spot parameters for their improved implosion performance.

physics.plasm-ph↗

arXiv2026

PinPoint: Prompting with Informative Interior Points

Modern referring image segmentation pipelines couple a vision-language model (VLM) for grounding with a promptable segmenter such as the Segment Anything Model (SAM) for mask generation. Prior training-free instances of this recipe consistently trail fine-tuned and reinforcement-learning (RL)-tuned specialists, and it has been unclear whether the gap comes from the VLM's grounding, SAM's capacity, or the prompt. We show that the gap is dominated by prompt ambiguity: a VLM-proposed bounding box (bbox) leaves SAM to guess which pixels inside the bbox belong to the object the expression denotes. Interior points are the natural disambiguator, but where they fall matters; prior work relies on naively sampled points that land on boundaries, distractors, and background clutter, and can even hurt performance compared to the bbox alone. Supervised and RL-tuned methods close this gap by training a VLM to predict better points; we show that this training is unnecessary. At a matched budget of five interior points, replacing naive sampling with stable, informative point selection improves cumulative Intersection-over-Union (cIoU) by 12-18 points across RefCOCO/+/g, with every model fixed. We turn this observation into PinPoint, a deterministic, training-free point selector that fuses four visual cues into a consensus map, selects compact, spatially diverse points away from boundaries, and uses the frozen VLM to label each point. Without any task-specific training, PinPoint matches supervised and RL-tuned specialists on the same stack while issuing only two VLM calls per query.

cs.CV↗

arXiv2024

The potential functions of an international institution for AI safety. Insights from adjacent policy areas and recent trends

Governments, industry, and other actors involved in governing AI technologies around the world agree that, while AI offers tremendous promise to benefit the world, appropriate guardrails are required to mitigate risks. Global institutions, including the OECD, the G7, the G20, UNESCO, and the Council of Europe, have already started developing frameworks for ethical and responsible AI governance. While these are important initial steps, they alone fall short of addressing the need for institutionalised international processes to identify and assess potentially harmful AI capabilities. Contributing to the relevant conversation on how to address this gap, this chapter reflects on what functions an international AI safety institute could perform. Based on the analysis of both existing international governance models addressing safety considerations in adjacent policy areas and the newly established national AI safety institutes in the UK and US, the chapter identifies a list of concrete functions that could be performed at the international level. While creating a new international body is not the only way forward, understanding the structure of these bodies from a modular perspective can help us to identify the tools at our disposal. These, we suggest, can be categorised under three functional domains: a) technical research and cooperation, b) safeguards and evaluations, c) policymaking and governance support.

cs.CY↗

arXiv2023

Electronic g-factor and tunable spin-orbit coupling in a gate-defined InSbAs quantum dot

We investigate transport properties of stable gate-defined quantum dots formed in an InSb$_{0.87}$As$_{0.13}$ quantum well. High $\textit{g}$-factor and strong spin-orbit-coupling make InSb$_x$As$_{1-x}$ a promising platform for exploration of topological superconductivity and spin-based devices. We extract a nearly isotropic in-plane effective $\textit{g}$-factor by studying the evolution of Coulomb blockade peaks and differential conductance as a function of the magnitude and direction of magnetic field. The in-plane $\textit{g}$-factors, $|g^*_{[1\bar{1}0]}|$ and $|g^*_{[110]}|$, range from 49 - 58. Interestingly, this $\textit{g}$-factor is higher than that found in quantum dots fabricated from pure InSb quantum wells. We demonstrate tunable spin-orbit-coupling by tracking a spin-orbit-coupling mediated avoided level crossing between the ground state and an excited state in magnetic field. By increasing the electron density, we observed an increase in an avoided crossing separation, $\Delta_{SO}$. The maximum energy separation extracted is $\Delta_{SO}$$\sim$100 $\mu$eV.

cond-mat.mes-hall↗

arXiv2023

Metallurgical synthesis methods for Mg-Al-Ca scientific model materials

Mg-based alloys are industrially used for structural applications, both as solid solutions alloys and as composites containing intermetallic compounds. However, a further development in terms of mechanical properties requires the investigation of underlying causalities between synthesis, processing and microstructure to adjust the mechanical and the corrosion properties, ideally down to the near atomic scale. Such fundamental scientific investigations with high resolution characterisation techniques require model materials of exceptionally high purity and strictly controlled microstructure e.g. with respect to grain size, morphology, chemical homogeneity as well as content and size of oxide inclusions. In this context, the Mg-Al-Ca system appears exceptionally challenging from a metallurgical perspective due to the high reactivity and high vapor pressures, so that conventional industrial techniques cannot be successfully deployed. Here, we demonstrate the applicability of various scientific synthesis methods from arc melting over solution growth to diffusion couples, extending to effects and parameters for thermo-mechanical processing. Suitable pathways to overcome the specific challenges of the Mg-Al-Ca system are demonstrated, as well as the persistent limitations of the current state of the art laboratory metallurgy technology.

cond-mat.mtrl-sci↗

arXiv2022

Radio Detection

Detection techniques at radio wavelengths play an important role in the future of astrophysics experiments. The radio detection of cosmic rays, neutrinos, and photons has emerged as the technology of choice at the highest energies. Cosmological surveys require the detection of radiation at mm wavelengths at thresholds down to the fundamental noise limit. High energy astroparticle and neutrino detectors use large volumes of a naturally occurring suitable dielectric: the Earth's atmosphere and large volumes of cold ice as available in polar regions. The detection technology for radio detection of cosmic particles has matured in the past decade and is ready to move beyond prototyping or midscale applications. Instrumentation for radio detection has reached a maturity for science scale detectors. Radio detection provides competitive results in terms of the measurement of energy and direction and in particle identification when to compared to currently applied technologies for high-energy neutrinos when deployed in ice and for ultra-high-energy cosmic rays, neutrinos, and photons when deployed in the atmosphere. It has significant advantages in terms of cost per detection station and ease of deployment.

astro-ph.IM↗

arXiv2022

Spin-orbit coupling and electron scattering in high-quality InSb$_{1-x}$As$_{x}$ quantum wells

InSb$_{1-x}$As$_{x}$ is a promising material system for exploration of topological superconductivity in hybrid superconductor/semiconductor devices due to large effective g-factor and enhanced spin-orbit coupling when compared to binary InSb and InAs. Much remains to be understood concerning the fundamental properties of the two-dimensional electron gas (2DEG) in InSbAs quantum wells. We report on the electrical properties of a series of 30 nm InSb$_{1-x}$As$_{x}$ quantum wells grown 40 nm below the surface with three different arsenic mole fractions, x = 0.05, 0.13 and 0.19. The dependencies of mobility on 2DEG density and arsenic mole fraction are analyzed. For the x = 0.05 sample, the 2DEG displays a peak mobility $\mu$ = 2.4 $\times$ 10$^5$ cm$^2$/Vs at a density of n = 2.5 $\times$ 10$^{11}$ cm$^{-2}$. High mobility, small effective mass, and strong spin-orbit coupling result in beating in the Shubnikov de Hass oscillations at low magnetic field. Fourier analysis of the Shubnikov de Haas oscillations facilitates extraction of the Rashba spin-orbit parameter ${\alpha}$ as a function of 2DEG density and quantum well mole fraction. For x = 0.19 at n = 3.1 $\times$ 10$^{11}$ cm$^{-2}$, ${\alpha}$ $\approx$ 300 meV$\r{A}$, among the highest reported values in III-V materials.

cond-mat.mes-hall↗

arXiv2022

Local and Nonlocal Transport Spectroscopy in Planar Josephson Junctions

We report simultaneously acquired local and nonlocal transport spectroscopy in a phase-biased planar Josephson junction based on an epitaxial InAs/Al hybrid two-dimensional heterostructure. Quantum point contacts at the junction ends allow measurement of the 2 x 2 matrix of local and nonlocal tunneling conductances as a function of magnetic field along the junction, phase difference across the junction, and carrier density. A closing and reopening of a gap was observed in both the local and nonlocal tunneling spectra as a function of magnetic field. For particular tunings of junction density, gap reopenings were accompanied by zero-bias conductance peaks (ZBCPs) in local conductances. End-to-end correlation of gap reopening was strong, while correlation of local ZBCPs was weak. A simple, disorder-free model of the device shows comparable conductance matrix behavior associated with a topological phase transition. Phase dependence helps distinguish possible origins of the ZBCPs.

cond-mat.mes-hall↗

arXiv2022

Signatures of a topological phase transition in a planar Josephson junction

A growing body of work suggests that planar Josephson junctions fabricated using superconducting hybrid materials provide a highly controllable route toward one-dimensional topological superconductivity. Among the experimental controls are in-plane magnetic field, phase difference across the junction, and carrier density set by electrostatic gate voltages. Here, we investigate planar Josephson junctions with an improved design based on an epitaxial InAs/Al heterostructure, embedded in a superconducting loop, probed with integrated quantum point contacts (QPCs) at both ends of the junction. For particular ranges of in-plane field and gate voltages, a closing and reopening of the superconducting gap is observed, along with a zero-bias conductance peak (ZBCP) that appears upon reopening of the gap. Consistency with a simple theoretical model supports the interpretation of a topological phase transition. While gap closings and reopenings generally occurred together at the two ends of the junction, the height, shape, and even presence of ZBCPs typically differed between the ends, presumably due to disorder and variation of couplings to local probes.

cond-mat.mes-hall↗

arXiv2021

Spin-Relaxation Mechanisms in InAs Quantum Well Heterostructures

The spin-orbit interaction and spin-relaxation mechanisms of a shallow InAs quantum well heterostructure are investigated by magnetoconductance measurements as a function of an applied top-gate voltage. The data were fit using the Iordanskii--Lyanda-Geller--Pikus model and two distinct transport regimes were identified which correspond to the first and second sub-bands of the quantum well. The spin-orbit interaction splitting energy is extracted from the fits to the data, which also displays two distinct regimes. The different sub-band regimes exhibit different spin-scattering mechanisms, the identification of which, is of relevance for device platforms of reduced dimensionality which utilise the spin-orbit interaction.

cond-mat.mes-hall↗

arXiv2021

Josephson Junctions Via Anodization of Epitaxial Al on an InAs Heterostructure

We combine electron beam lithography and masked anodization of epitaxial aluminium to define tunnel junctions via selective oxidation, alleviating the need for wet-etch processing or direct deposition of dielectric materials. Applying this technique to define Josephson junctions in proximity induced superconducting Al-InAs heterostructures, we observe multiple Andreev reflections in transport experiments, indicative of a high quality junction. We further compare the mobility and density of Hall-bars defined via wet etching and anodization. These results may find utility in uncovering new fabrication approaches to junction-based qubit platforms.

cond-mat.supr-con↗

arXiv2021

Spin-orbit Energies in Etch-Confined Superconductor-Semiconductor Nanowires

We report magneto-transport measurements of quasi-1-dimensional (1D) Al-InAs nanowires produced via etching of a hybrid superconductor-semiconductor two-dimensional electron gas (2DEG). Tunnel spectroscopy measurements above the superconducting gap provide a means of identifying the 1D sub-bands associated with the confined 1D region. Fitting the data to a model that includes the different components of the spin-orbit interaction (SOI) reveals their strength, of interest for evaluating the suitability of superconductor-semiconductor 2DEG for realizing Majorana qubits.

cond-mat.mes-hall↗

arXiv2019

Relating Andreev Bound States and Supercurrents in Hybrid Josephson Junctions

We investigate superconducting quantum interference devices consisting of two highly transmissive Josephson junctions coupled by a superconducting loop, all defined in an epitaxial InAs/Al heterostructure. A novel device design allows for independent measurements of the Andreev bound state spectrum within the normal region of a junction and the resulting current-phase relation. We show that knowledge of the Andreev bound state spectrum alone is enough to derive the independently measured phase dependent supercurrent. On the other hand, the opposite relation does not generally hold true as details of the energy spectrum are averaged out in a critical current measurement. Finally, quantitative understanding of field dependent spectrum and supercurrent require taking into account the second junction in the loop and the kinetic inductance of the epitaxial Al film.

cond-mat.mes-hall↗

arXiv2019

Yield-stress anomaly in equiatomic ZrNbTiVHf high-entropy alloys

We have carried out plastic deformation experiments on single-phase samples of the body centered ZrNbTiVHf high-entropy alloy between room temperature and 1150 K. The experiments were carried out on polycrystalline samples with two different grain sizes, in compression at a true constant strain rate of 10-4 1/s. Incremental tests such as stress-relaxation tests, strain-rate changes and temperature changes were carried out in order to determine thermodynamic activation parameters of the plastic deformation process. The material displays a yield-stress anomaly in the temperature range between about 500 and 800 K, where the yield stress increases with increasing temperature. In the same temperature range, we find an extremely low strain-rate dependence of the flow stress, which is reflected in almost constant flow-stress values in stress-relaxations and strain-rate changes. At temperatures below 400 and above 800 K we find regular plastic deformation behavior with a linear temperature dependence of the yield stress of about -1.1 MPa/K, an activation volume of around 1.8 nm3 and 0.2 nm3 at low and high stresses, respectively, and an activation enthalpy of 2.7 eV in the high-temperature range.

cond-mat.mtrl-sci↗

arXiv2019

Repairing the Surface of InAs-based Topological Heterostructures

Candidate systems for topologically-protected qubits include two-dimensional electron gases (2DEGs) based on heterostructures exhibiting a strong spin-orbit interaction (SOI) and superconductivity via the proximity effect. For InAs- or InSb-based materials, the need to form shallow quantum wells to create a hard-gapped $p$-wave superconducting state often subjects them to fabrication-induced damage, limiting their mobility. Here we examine scattering mechanisms in processed InAs 2DEG quantum wells and demonstrate a means of increasing their mobility via repairing the semiconductor-dielectric interface. Passivation of charged impurity states with an argon-hydrogen plasma results in a significant increase in the measured mobility and reduction in its variance relative to untreated samples, up to 45300 cm$^2$/(V s) in a 10 nm deep quantum well.

cond-mat.mes-hall↗

arXiv2019

Coherent transport through a Majorana island in an Aharonov-Bohm interferometer

Majorana zero modes are leading candidates for topological quantum computation due to non-local qubit encoding and non-abelian exchange statistics. Spatially separated Majorana modes are expected to allow phase-coherent single-electron transport through a topological superconducting island via a mechanism referred to as teleportation. Here we experimentally investigate such a system by patterning an elongated epitaxial InAs-Al island embedded in an Aharonov-Bohm interferometer. With increasing parallel magnetic field, a discrete sub-gap state in the island is lowered to zero energy yielding persistent 1e-periodic Coulomb blockade conductance peaks (e is the elementary charge). In this condition, conductance through the interferometer is observed to oscillate in a perpendicular magnetic field with a flux period of h/e (h is Planck's constant), indicating coherent transport of single electrons through the islands, a signature of electron teleportation via Majorana modes, could also be observed, suggesting additional non-Majorana mechanisms for 1e transport through these moderately short wires.

cond-mat.mes-hall↗

arXiv2018

High mobility InAs 2DEGs on GaSb substrates: a platform for mesoscopic quantum transport

High mobility, strong spin-orbit coupling, and large Land\'e g-factor make the two-dimensional electron gas (2DEG) in InAs quantum wells grown on nearly-lattice-matched GaSb substrates an attractive platform for mesoscopic quantum transport experiments. Successful operation of mesoscopic devices relies on three key properties: electrical isolation from the substrate; ability to fully deplete the 2DEG and control residual sidewall conduction with lithographic gates; and high mobility to ensure ballistic transport over mesoscopic length scales. Simultaneous demonstration of these properties has remained elusive for InAs 2DEGs on GaSb substrates. Here we report on heterostructure design, molecular beam epitaxy growth, and device fabrication that result in high carrier mobility and full 2DEG depletion with minimal residual edge conduction. Our results provide a pathway to fully-controlled 2DEG-based InAs mesoscopic devices.

cond-mat.mes-hall↗

arXiv2018

Hybridization of sub-gap states in one-dimensional superconductor/semiconductor Coulomb islands

We present measurements of one-dimensional superconductor-semiconductor Coulomb islands, fabricated by gate confinement of a two-dimensional InAs heterostructure with an epitaxial Al layer. When tuned via electrostatic side gates to regimes without sub-gap states, Coulomb blockade reveals Cooper-pair mediated transport. When sub-gap states are present, Coulomb peak positions and heights oscillate in a correlated way with magnetic field and gate voltage, as predicted theoretically, with (anti) crossings in (parallel) transverse magnetic field indicating Rashba-type spin-orbit coupling. Overall results are consistent with a picture of overlapping Majorana zero modes in finite wires.

cond-mat.mes-hall↗