arXiv subjects

Branka Vucetic

Publications and source records attributed to Branka Vucetic.

At least 109 records · Page 6Linked to original sources

arXiv2020

Power Adaptive Network Coding for a Non-Orthogonal Multiple-Access Relay Channel

In this paper we propose a novel power adapted network coding (PANC) for a non-orthogonal multiple-access relay channel (MARC), where two sources transmit their information simultaneously to the destination with the help of a relay. Different from the conventional XOR-based network coding (CXNC), the relay in our PANC generates network coded bits by considering the coefficients of the source-to-relay channels, and forwards each bit with a pre-optimized power level. Specifically, by defining a symbol pair as two symbols from the two sources, we first derive the exact symbol pair error rate (SPER) of the system. Noting that the generations of the exact SPER are complicated due to the irregularity of the decision regions caused by random channel coefficients, we propose a coordinate transform (CT) method to simplify the derivations of the SPER. Next, we prove that with a power scaling factor at relay, our PANC scheme can achieve full diversity gain, i.e., two-order diversity gain, of the system, while the CXNC can only achieve one-order diversity gain due to multi-user interference. In addition, we optimize the power levels at the relay to equivalently minimize the SPER at the destination concerning the relationship between SPER and minimum Euclidean distance of the received constellation. Simulation results show that (1) the SPER derived based on our CT method can well approximate the exact SPER with a much lower complexity; (2) the PANC scheme with power level optimizations and power scaling factor design can achieve full diversity, and obtain a much higher coding gain than the PANC scheme with randomly chosen power levels.

eess.SP↗

arXiv2020

Green MU-MIMO/SIMO Switching for Heterogeneous Delay-aware Services with Constellation Optimization

In this paper, we propose adaptive techniques for multi-user multiple input and multiple output~(MU-MIMO) cellular communication systems, to solve the problem of energy efficient communications with heterogeneous delay-aware traffic. In order to minimize the total transmission power of the MU-MIMO, we investigate the relationship between the transmission power and the M-ary quadrature amplitude modulation~(MQAM) constellation size and get the energy efficient modulation for each transmission stream based on the minimum mean square error~(MMSE) receiver.Since the total power consumption is different for MU-MIMO and multi-user single input and multiple output~(MU-SIMO), by exploiting the intrinsic relationship among the total power consumption model, and heterogeneous delay-aware services, we propose an adaptive transmission strategy, which is a switching between MU-MIMO and MU-SIMO. Simulations show that in order to maximize the energy efficiency and consider different Quality of Service (QoS) of delay for the users simultaneously, the users should adaptively choose the constellation size for each stream as well as the transmission mode.

eess.SP↗

arXiv2020

Deep Learning for Ultra-Reliable and Low-Latency Communications in 6G Networks

In the future 6th generation networks, ultra-reliable and low-latency communications (URLLC) will lay the foundation for emerging mission-critical applications that have stringent requirements on end-to-end delay and reliability. Existing works on URLLC are mainly based on theoretical models and assumptions. The model-based solutions provide useful insights, but cannot be directly implemented in practice. In this article, we first summarize how to apply data-driven supervised deep learning and deep reinforcement learning in URLLC, and discuss some open problems of these methods. To address these open problems, we develop a multi-level architecture that enables device intelligence, edge intelligence, and cloud intelligence for URLLC. The basic idea is to merge theoretical models and real-world data in analyzing the latency and reliability and training deep neural networks (DNNs). Deep transfer learning is adopted in the architecture to fine-tune the pre-trained DNNs in non-stationary networks. Further considering that the computing capacity at each user and each mobile edge computing server is limited, federated learning is applied to improve the learning efficiency. Finally, we provide some experimental and simulation results and discuss some future directions.

eess.SP↗

arXiv2020

Near-Optimal Interference Exploitation 1-Bit Massive MIMO Precoding via Partial Branch-and-Bound

In this paper, we focus on 1-bit precoding for large-scale antenna systems in the downlink based on the concept of constructive interference (CI). By formulating the optimization problem that aims to maximize the CI effect subject to the 1-bit constraint on the transmit signals, we mathematically prove that, when relaxing the 1-bit constraint, the majority of the obtained transmit signals already satisfy the 1-bit constraint. Based on this important observation, we propose a 1-bit precoding method via a partial branch-and-bound (P-BB) approach, where the BB procedure is only performed for the entries that do not comply with the 1-bit constraint. The proposed P-BB enables the use of the BB framework in large-scale antenna scenarios, which was not applicable due to its prohibitive complexity. Numerical results demonstrate a near-optimal error rate performance for the proposed 1-bit precoding algorithm.

eess.SP↗

arXiv2020

Design of Non-orthogonal and Noncoherent Massive MIMO for Scalable URLLC Beyond 5G

This paper is to design and optimize a non-orthogonal and noncoherent massive multiple-input multiple-output (MIMO) framework towards enabling scalable ultra-reliable low-latency communications (sURLLC) in wireless systems beyond 5G. In this framework, the huge diversity gain associated with the large-scale antenna array in massive MIMO systems is leveraged to ensure ultrahigh reliability. To reduce the overhead and latency induced by the channel estimation process, we advocate the noncoherent communication technique which does not need the knowledge of instantaneous channel state information (CSI) but only depends on the large-scale fading coefficients for information decoding. To boost the scalability of the system considered, we enable the non-orthogonal channel access of multiple users by devising a new differential modulation scheme to assure that each transmitted signal matrix can be uniquely determined in the noise-free case and be reliably estimated in noisy cases when the antenna array size is scaled up. The key idea is to make the transmitted signals from multiple users be superimposed properly over the air such that when the sum-signal is correctly detected, the signals sent by all users can be uniquely determined. To further improve the average error performance when the array antenna number is large, we propose a max-min Kullback-Leibler (KL) divergence-based design by jointly optimizing the transmitted powers of all users and the sub-constellation assignment among them. Simulation results show that the proposed design significantly outperforms the existing max-min Euclidean distance-based counterpart in terms of error performance. Moreover, our proposed approach also has a better error performance than the conventional coherent zero-forcing (ZF) receiver with orthogonal channel training, particularly for cell-edge users.

eess.SP↗

arXiv2020

Physical Layer Authentication for Non-coherent Massive SIMO-Based Industrial IoT Communications

Achieving ultra-reliable, low-latency and secure communications is essential for realizing the industrial Internet of Things (IIoT). Non-coherent massive multiple-input multiple-output (MIMO) has recently been proposed as a promising methodology to fulfill ultra-reliable and low-latency requirements. In addition, physical layer authentication (PLA) technology is particularly suitable for IIoT communications thanks to its low-latency attribute. A PLA method for non-coherent massive single-input multiple-output (SIMO) IIoT communication systems is proposed in this paper. Specifically, we first determine the optimal embedding of the authentication information (tag) in the message information. We then optimize the power allocation between message and tag signal to characterize the trade-off between message and tag error performance. Numerical results show that the proposed PLA is more accurate then traditional methods adopting the uniform tag when the communication reliability remains at the same level. The proposed PLA method can be effectively applied to the non-coherent system.

eess.SP↗

arXiv2020

Minimizing Age of Information via Hybrid NOMA/OMA

This paper considers a wireless network with a base station (BS) conducting timely transmission to two clients in a slotted manner via hybrid non-orthogonal multiple access (NOMA)/orthogonal multiple access (OMA). Specifically, the BS is able to adaptively switch between NOMA and OMA for the downlink transmission to minimize the information freshness, characterized by Age of Information (AoI), of the network. If the BS chooses OMA, it can only serve one client within a time slot and should decide which client to serve; if the BS chooses NOMA, it can serve both clients simultaneously and should decide the power allocated to each client. To minimize the weighted sum of expected AoI of the network, we formulate a Markov Decision Process (MDP) problem and develop an optimal policy for the BS to decide whether to use NOMA or OMA for each downlink transmission based on the instantaneous AoI of both clients. We prove the existence of optimal stationary and deterministic policy, and perform action elimination to reduce the action space for lower computation complexity. The optimal policy is shown to have a switching-type property with obvious decision switching boundaries. A suboptimal policy with lower computation complexity is also devised, which can achieve near-optimal performance according to our simulation results. The performance of different policies under different system settings is compared and analyzed in numerical results to provide useful insights for practical system designs.

cs.IT↗

arXiv2020

Minimizing the Age of Information of Cognitive Radio-Based IoT Systems Under A Collision Constraint

This paper considers a cognitive radio-based IoT monitoring system, consisting of an IoT device that aims to update its measurement to a destination using cognitive radio technique. Specifically, the IoT device as a secondary user (SIoT), seeks and exploits the spectrum opportunities of the licensed band vacated by its primary user (PU) to deliver status updates without causing visible effects to the licensed operation. In this context, the SIoT should carefully make use of the licensed band and schedule when to transmit to maintain the timeliness of the status update. We adopt a recent metric, Age of Information (AoI), to characterize the timeliness of the status update of the SIoT. We aim to minimize the long-term average AoI of the SIoT while satisfying the collision constraint imposed by the PU by formulating a constrained Markov decision process (CMDP) problem. We first prove the existence of optimal stationary policy of the CMDP problem. The optimal stationary policy (termed age-optimal policy) is shown to be a randomized simple policy that randomizes between two deterministic policies with a fixed probability. We prove that the two deterministic policies have a threshold structure and further derive the closed-form expression of average AoI and collision probability for the deterministic threshold-structured policy by conducting Markov Chain analysis. The analytical expression offers an efficient way to calculate the threshold and randomization probability to form the age-optimal policy. For comparison, we also consider the throughput maximization policy (termed throughput-optimal policy) and analyze the average AoI performance under the throughput-optimal policy in the considered system. Numerical simulations show the superiority of the derived age-optimal policy over the throughput-optimal policy. We also unveil the impacts of various system parameters on the corresponding optimal policy and the resultant average AoI.

cs.IT↗

arXiv2020

Minimum-Latency FEC Design with Delayed Feedback: Mathematical Modeling and Efficient Algorithms

In this paper, we consider the packet-level forward error correction (FEC) code design, without feedback or with delayed feedback, for achieving the minimum end-to-end latency, i.e., the latency between the time when packet is generated at the source and its \emph{in-order delivery} to the application layer of the destination. We first show that the minimum-latency FEC design problem can be modeled as a partially observable Markov decision process (POMDP), and hence the optimal code construction can be obtained by solving the corresponding POMDP. However, solving the POMDP optimally is in general difficult unless the size is very small. To this end, we propose an efficient heuristic algorithm, namely the majority vote policy, for obtaining a high quality approximate solution. We also derive the tight lower and upper bounds of the optimal state values of this POMDP, based on which a more sophisticated D-step search algorithm is implemented for obtaining near-optimal solutions. The simulation results show that the proposed code designs via solving the POMDP, either with the majority vote policy or the D-step search algorithm, strictly outperform the existing schemes, in both cases, without or with only delayed feedback.

cs.IT↗

arXiv2020

Spectrum Intelligent Radio: Technology, Development, and Future Trends

The advent of Industry 4.0 with massive connectivity places significant strains on the current spectrum resources, and challenges the industry and regulators to respond promptly with new disruptive spectrum management strategies. The current radio development, with certain elements of intelligence, is nowhere near showing an agile response to the complex radio environments. Following the line of intelligence, we propose to classify spectrum intelligent radio into three streams: classical signal processing, machine learning (ML), and contextual adaptation. We focus on the ML approach, and propose a new intelligent radio architecture with three hierarchical forms: perception, understanding, and reasoning. The proposed perception method achieves fully blind multi-level spectrum sensing. The understanding method accurately predicts the primary users' coverage across a large area, and the reasoning method performs a near-optimal idle channel selection. Opportunities, challenges, and future visions are also discussed for the realization of a fully intelligent radio.

cs.IT↗

arXiv2019

Signal Design for AF Relay Systems using Superposition Coding and Finite-Alphabet Inputs

This paper focuses on the signal design in a Gaussian amplify-and-forward (AF) relay system with superposition coding (SC) being applied at the relay, which allows the source and relay to transmit their own information within two time slots. Practical quadrature amplitude modulation (QAM) constellations are adopted at the source and relay. To improve the system error performance, we optimize the weight coefficients adopted at the source and relay to maximize the minimum Euclidean distance of the received composite constellation, subject to their individual average power constraints. The formulated optimization problem is shown to be a mixed continuous-discrete one that is non-trivial to resolve in general. By resorting to the punched Farey sequence, we manage to obtain the optimal solution to the formulated problem by first partitioning the entire feasible region into a finite number of sub-intervals and then taking the maximum over all the possible sub-intervals. Simulation results are provided to demonstrate the superior performance of our proposed design based on SC over that using conventional time division multiple access (TDMA).

eess.SP↗

arXiv2019

Minimizing Age of Information for Real-Time Monitoring in Resource-Constrained Industrial IoT Networks

This paper considers an Industrial Internet of Thing (IIoT) system with a source monitoring a dynamic process with randomly generated status updates. The status updates are sent to an designated destination in a real-time manner over an unreliable link. The source is subject to a practical constraint of limited average transmission power. Thus, the system should carefully schedule when to transmit a fresh status update or retransmit the stale one. To characterize the performance of timely status update, we adopt a recent concept, Age of Information (AoI), as the performance metric. We aim to minimize the long-term average AoI under the limited average transmission power at the source, by formulating a constrained Markov Decision Process (CMDP) problem. To address the formulated CMDP, we recast it into an unconstrained Markov Decision Process (MDP) through Lagrangian relaxation. We prove the existence of optimal stationary policy of the original CMDP, which is a randomized mixture of two deterministic stationary policies of the unconstrained MDP. We also explore the characteristics of the problem to reduce the action space of each state to significantly reduce the computation complexity. We further prove the threshold structure of the optimal deterministic policy for the unconstrained MDP. Simulation results show the proposed optimal policy achieves lower average AoI compared with random policy, especially when the system suffers from stricter resource constraint. Besides, the influence of status generation probability and transmission failure rate on optimal policy and the resultant average AoI as well as the impact of average transmission power on the minimal average AoI are unveiled.

cs.IT↗

arXiv2019

Wireless Networked Control Systems with Coding-Free Data Transmission for Industrial IoT

Wireless networked control systems for the Industrial Internet of Things (IIoT) require low latency communication techniques that are very reliable and resilient. In this paper, we investigate a coding-free control method to achieve ultra-low latency communications in single-controller-multi-plant networked control systems for both slow and fast fading channels. We formulate a power allocation problem to optimize the sum cost functions of multiple plants, subject to the plant stabilization condition and the controller's power limit. Although the optimization problem is a non-convex one, we derive a closed-form solution, which indicates that the optimal power allocation policy for stabilizing the plants with different channel conditions is reminiscent of the channel-inversion policy. We numerically compare the performance of the proposed coding-free control method and the conventional coding-based control methods in terms of the control performance (i.e., the cost function) of a plant, which shows that the coding-free method is superior in a practical range of SNRs.

cs.IT↗

arXiv2019

Hybrid Precoding Design for Reconfigurable Intelligent Surface aided mmWave Communication Systems

In this letter, we focus on the hybrid precoding (HP) design for the reconfigurable intelligent surface (RIS) aided multi-user (MU) millimeter wave (mmWave) communication systems. Specifically, we aim to minimize the mean-squared-error (MSE) between the received symbols and the transmitted symbols by jointly optimizing the analog-digital HP at the base-station (BS) and the phase shifts (PSs) at the RIS, where the non-convex element-wise constant-modulus constraints for the analog precoding and the PSs are tackled by resorting to the gradient-projection (GP) method. We analytically prove the convergence of the proposed algorithm and demonstrate the desirable performance gain for the proposed design through numerical results.

cs.NI↗

arXiv2019

Dynamic HARQ with Guaranteed Delay

In this paper, a dynamic-hybrid automatic repeat request (D-HARQ) scheme with guaranteed delay performance is proposed. As opposed to the conventional HARQ that the maximum number of re-transmissions, L, is fixed, in the proposed scheme packets can be retransmitted more times given that the previous packet was received with less than L re-transmissions. The dynamic of the proposed scheme is analyzed using the Markov model. For delay-sensitive applications, the proposed scheme shows superior performance in terms of packet error rate compared with the conventional HARQ and Fixed re-transmission schemes when the channel state information is not available at the transmitter. We further show that D-HARQ achieves a higher throughput compared with the conventional HARQ and fixed re-transmission schemes under the same reliability constraint.

cs.IT↗

arXiv2019

Optimal Downlink-Uplink Scheduling of Wireless Networked Control for Industrial IoT

This paper considers a wireless networked control system (WNCS) consisting of a dynamic system to be controlled (i.e., a plant), a sensor, an actuator and a remote controller for mission-critical Industrial Internet of Things (IIoT) applications. A WNCS has two types of wireless transmissions, i.e., the sensor's measurement transmission to the controller and the controller's command transmission to the actuator. In this work, we consider a practical half-duplex controller, which introduces a novel transmission-scheduling problem for WNCSs. A frequent scheduling of sensor's transmission results in a better estimation of plant states at the controller and thus a higher quality of control command, but it leads to a less frequent/timely control of the plant. Therefore, considering the overall control performance of the plant in terms of its average cost function, there exists a fundamental tradeoff between the sensor's and the controller's transmissions. We formulate a new problem to optimize the transmission-scheduling policy for minimizing the long-term average cost function. We derive the necessary and sufficient condition of the existence of a stationary and deterministic optimal policy that results in a bounded average cost in terms of the transmission reliabilities of the sensor-to-controller and controller-to-actuator channels. Also, we derive an easy-to-compute suboptimal policy, which notably reduces the average cost of the plant compared to a naive alternative-scheduling policy.

cs.IT↗

arXiv2019

Computation Offloading for IoT in C-RAN: Optimization and Deep Learning

We consider computation offloading for Internet-of-things (IoT) applications in multiple-input-multiple-output (MIMO) cloud-radio-access-network (C-RAN). Due to the limited battery life and computational capability in the IoT devices (IoTDs), the computational tasks of the IoTDs are offloaded to a MIMO C-RAN, where a MIMO radio resource head (RRH) is connected to a baseband unit (BBU) through a capacity-limited fronthaul link, facilitated by the spatial filtering and uniform scalar quantization. We formulate a computation offloading optimization problem to minimize the total transmit power of the IoTDs while satisfying the latency requirement of the computational tasks, and find that the problem is non-convex. To obtain a feasible solution, firstly the spatial filtering matrix is locally optimized at the MIMO RRH. Subsequently, we leverage the alternating optimization framework for joint optimization on the residual variables at the BBU, where the baseband combiner is obtained in a closed-form, the resource allocation sub-problem is solved through successive inner convexification, and the number of quantization bits is obtained by a line-search method. As a low-complexity approach, we deploy a supervised deep learning method, which is trained with the solutions to our optimization algorithm. Numerical results validate the effectiveness of the proposed algorithm and the deep learning method.

cs.NI↗

arXiv2019

Prediction and Communication Co-design for Ultra-Reliable and Low-Latency Communications

Ultra-reliable and low-latency communications (URLLC) are considered as one of three new application scenarios in the fifth generation cellular networks. In this work, we aim to reduce the user experienced delay through prediction and communication co-design, where each mobile device predicts its future states and sends them to a data center in advance. Since predictions are not error-free, we consider prediction errors and packet losses in communications when evaluating the reliability of the system. Then, we formulate an optimization problem that maximizes the number of URLLC services supported by the system by optimizing time and frequency resources and the prediction horizon. Simulation results verify the effectiveness of the proposed method, and show that the tradeoff between user experienced delay and reliability can be improved significantly via prediction and communication co-design. Furthermore, we carried out an experiment on the remote control in a virtual factory, and validated our concept on prediction and communication co-design with the practical mobility data generated by a real tactile device.

eess.SP↗