arXiv Science⌕ Search

arXiv subjects

Axel Lubk

Publications and source records attributed to Axel Lubk.

At least 19 recordsLinked to original sources

Contrasting one- and two-particle excitations in cuprate strange metals

In unconventional superconductivity, the pairing mechanism remains one of the central unresolved problems in solid-state physics. Moreover, the normal state shows strong deviations from conventional Fermi-liquid behavior, most notably a scattering rate that is linear in energy and temperature. Here we study the momentum dependence of the energy and damping of collective excitations in optimally doped cuprates in the normal state. In particular, we analyze existing Electron Energy Loss Spectroscopy (EELS) data of Bi2Sr2CaCu2O8 [Phys. Rev. B 44, 7155 (1991)] and new analogous optical plasmon data of Bi2Sr2Ca2Cu3O10. Furthermore, we reanalyze similar Resonant Inelastic Xray Scattering (RIXS) acoustic plasmon data [Phys. Rev. R 6, 043184 (2024)] of La1.84Sr0.16CuO4 and La1.84Ce0.16CuO4. We contrast these two-particle excitation results with one-particle excitations measured by Angle-Resolved Photoemission Spectroscopy (ARPES). Most of the plasmon behavior can be described well by combined self-energies of a hole and an electron. The dispersion of optical plasmons at high energy is only weakly determined by correlation effects, indicating resilient quasiparticles. The damping of the optical plasmons at low energy, however, is strongly influenced by the reduced scattering rates described in the marginal Fermi liquid model for "strange-metal" behavior. In addition, the same model describes the linear-in-energy damping of acoustic plasmons. Contrary to some theoretical predictions, we see no overdamped optical plasmons below the classical Lindhard critical wave vector.

cond-mat.str-el↗

Structural supermodulation enables resonant Raman determination of crystalline orientation in Bi2Sr2CaCu2O8+x flakes

Bi2Sr2CaCu2O8+x (Bi-2212) is a d-wave superconductor with unconventional properties intrinsic to the material itself. These properties are of growing interest for quantum technologies in electronics and photonics, and twisted Josephson junctions can make direct use of them. However, Bi-2212 is strongly anisotropic, and it is challenging to find its crystal axes in flakes in advance, which limits device engineering. Here, we show that polarized resonant Raman spectroscopy reveals the orientation of both the a and b axes of Bi-2212 optically and non-destructively. By correlating Laue diffraction, HAADF-STEM and polarized Raman scattering on the same bulk crystal, we assign the b axis, along which the incommensurate structural supermodulation propagates, to the intensity maximum of the 27 cm-1 supermodulation mode, which varies in counter-phase with the 118 cm-1 Bi/Sr mode, along the a axis. Multi-wavelength measurements (458, 532, 660 nm) show that resulting in-plane contrast peaks at 532 nm and nearly vanishes at 660 nm, indicating that the anisotropy originates from an electronic resonance induced by the supermodulation. Using this resonance, we determine the crystallographic axes of exfoliated flakes and access their symmetry channels, providing a rapid orientation tool for cuprate van der Waals heterostructures.

cond-mat.supr-con↗

Prussian blue and Prussian white thin-film electrodes: Single-step electrodeposition for anode and cathode applications

This study examines how deposition potential influences the composition and nanoscale structure of Prussian Blue (PB)/Prussian White (PW)-family films, providing an experimental basis for assessing their proposed functions. Films were grown directly on Au/Cr/Si in a single potentiostatic step from a common aqueous bath at $-0.20$ to $+0.40$\,V versus a saturated calomel electrode, with a fixed deposition charge of 10\,mC. Electron microscopy, elemental analysis, X-ray photoelectron spectroscopy, and Raman spectroscopy revealed potential-dependent chemistry and nonmonotonic morphology. EDS indicated greater K incorporation in lower-potential deposits, whose Fe~2p and Raman features were consistent with more reduced, PW-like environments. Surface K/Fe ratios varied nonmonotonically from 1.129 to 1.322 across the series, corresponding to 52.95--56.94\% K within the detected K+Fe population. Larger faceted crystallites at $+0.30$\,V contrasted with finer pyramids and cracks at $+0.40$\,V. Selected PB-like and PW-like regions had local cubic lattice parameters of $(10.31\pm0.10)$\,Å and $(10.36\pm0.10)$\,Å, respectively; their overlapping uncertainties prevent discrimination by lattice spacing alone. Cross-sectional maps showed broadly uniform framework-element distributions within locally continuous coatings. Together, these observations relate deposition conditions to contrasting chemical and morphological starting states without establishing bulk stoichiometry or phase purity. A literature-grounded outlook identifies ion storage, sensing, electrochromism, resistive switching, and ion handling as research opportunities requiring functional validation in these films.

cond-mat.mtrl-sci↗

Electrodeposited Co and Ni Hexacyanoferrates: Insights into Structure and Morphology

Prussian blue (PB) and its analogues (PBAs) are interesting materials for electrochemical applications due to their tunable redox chemistry and open framework structure. In this study, hexacyanoferrates (HCF) containing iron (FeHCF), cobalt (CoHCF) and nickel (NiHCF) were synthesized via potentiostatic electrodeposition. Cyclic voltammetry revealed distinct redox behaviors. Morphological characterization (SEM, EDX) demonstrated uniform, pyramidal film growth for FeHCF and CoHCF. Otherwise, NiHCF presented a cracked film with cubic clusters on top due to residual stress. Despite this, homogeneous element distribution was found for all samples. Structural characterization (TEM and XRD) confirmed a cubic lattice crystal structure for all films, with systematic lattice contraction from Fe to Co to Ni due to decreasing atomic radius. Raman and XPS data revealed a shift toward Fe2+ dominant oxidation states and modifications in CN bonding with the influence of K+ and water occupancy in the PBAs framework. These findings illustrate how metal substitution and deposition parameters can tune the structural and electrochemical properties of PBA films, presenting a strategic route to design tailored electrodes.

cond-mat.mtrl-sci↗

Generation of Bloch Points with Controlled Spin Texture Using Geometrical Boundary Conditions

Bloch points are three-dimensional topological singularities in magnetization that play a key role in topological transformations of spin textures, such as skyrmion creation or annihilation. While topology often enforces the existence of Bloch points in confined geometries like cylindrical nanowires, deterministic control over their position and magnetic configuration remains challenging. Here we demonstrate the generation of Bloch points with controlled spin texture by engineering geometrical boundary conditions in three-dimensional nanomagnets. By introducing a chirality interface between two three-dimensional double-helix nanowires of opposite handedness, forming a kinked, non-collinear structure, we impose competing topological constraints that uniquely define the magnetization configuration surrounding the Bloch point. A saturating magnetic field nucleates head-to-head or tail-to-tail domain configurations at the chirality interface, producing a Bloch-point domain wall with deterministic polarity, circulation and helicity. This geometrical approach enables full three-dimensional control of Bloch point domain walls allowing deterministic engineering of their spin texture and its selective coupling to current-induced Oersted fields.

cond-mat.mes-hall↗

Curvilinear magnonic crystal based on 3D hierarchical nanotemplates

Curvilinear magnetic nanostructures enable control of magnetization dynamics through geometry-induced anisotropy and chiral interactions as well as magnetic field modulation. In this work, we report a curvilinear magnonic crystal based on large-area square arrays of truncated nanospikes fabricated by conformal coating of 3D hierarchical templates with permalloy thin films. Brillouin light scattering spectroscopy reveals anisotropic band structure with multiple dispersive and folded Bloch-type dispersive spin-wave modes as well as non-dispersive modes exhibiting direction-dependent frequency shifts and intensity asymmetries along lattice principal axes. Finite element micromagnetic simulations indicate that curvature-induced variations of the demagnetizing field govern the magnonic response, enabling the identification of modes propagating in nanochannels and other localized on nanospike apexes or along the ridges connecting adjacent nanospikes. The combination of geometric curvature and optical probing asymmetry produces directional dependence of magnonic bands, establishing 3D hierarchical templates as a versatile platform for curvature-engineered magnonics.

cond-mat.str-el↗

Noise Estimation and Suppression in Quantitative EMCD Measurements

Quantitative electron magnetic circular dichroism (EMCD) in transmission electron microscopy (TEM) enables the measurement of magnetic moments with elemental and atomic site sensitivity, but its practical application is fundamentally limited by noise. This study presents a comprehensive methodology for noise estimation and suppression in EMCD measurements, demonstrated on Ti-doped barium hexaferrite lamellae. By employing a classical three-beam geometry and long-term acquisition of electron energy-loss spectra, we systematically analyze the signal-to-noise ratio (SNR) across individual energy channels using bootstrap statistics. A robust energy alignment procedure based on the neighboring Ba-M4,5 edges with an adequate energy upsampling is introduced to minimize systematic errors from energy misalignment. The impact of detector noise, particularly from CMOS-based EELS cameras, is evaluated through variance-to-mean analysis and described by the noise amplification coefficients, revealing that detector-amplified shot noise is the dominant noise source. We recommend a stricter SNR threshold for reliable EMCD detection and quantification, ensuring that critical spectral features such as the Fe-L2,3 peaks meet the requirements for quantitative analysis. The approach also provides a framework for determining the minimum electron dose necessary for valid measurements and can be generalized to scintillator-based or direct electron detectors. This work advances the reliability of EMCD as a quantitative tool for magnetic characterization at the nanoscale with unknown magnetic structures. The proposed procedures lay the groundwork for improved error handling and SNR optimization in future EMCD studies.

cond-mat.mtrl-sci↗

Inducing ferromagnetism by structural engineering in a strongly spin-orbit coupled oxide

Magnetic materials with strong spin-orbit coupling (SOC) are essential for the advancement of spin-orbitronic devices, as they enable efficient spin-charge conversion, complex magnetic structures, spin-valley physics, topological phases and other exotic phenomena. 5d transition-metal oxides such as SrIrO3 feature large SOC, but usually show paramagnetic behavior due to broad bands and a low density of states at the Fermi level, accompanied by a relatively low Coulomb repulsion. Here, we unveil ferromagnetism in 5d SrIrO3 thin films grown on SrTiO3 (111). Through substrate-induced structural engineering, a zigzag stacking of three-unit-cell thick layers along the [111] direction is achieved, stabilizing a ferromagnetic state at the interfaces. Magnetotransport measurements reveal an anomalous Hall effect below ~30 K and hysteresis in the Hall conductivity below 7 K, indicating ferromagnetic ordering. X-ray magnetic circular dichroism further supports these results. Theoretical analysis suggests that the structural engineering of the IrO6 octahedral network enhances the density of states at the Fermi level and thus stabilizes Stoner ferromagnetism. This work highlights the potential of structurally engineered 5d oxides for spin-orbitronic devices, where efficient control of SOC-induced magnetic phases by electric currents can lead to lower energy consumption and improved performance in next-generation device technologies.

cond-mat.mtrl-sci↗

Geometry Dependent Localization of Surface Plasmons on Random Gold Nanoparticle Assemblies

Assemblies of plasmonic nanoparticles (NPs) support hybridized modes of localized surface plasmons (LSPs), which delocalize in geometrically well-ordered arrangements. Here, the hybridization behavior of LSPs in geometrically completely disordered arrangements of Au NPs fabricated by an e-beam synthesis method is studied. Employing electron energy loss spectroscopy in a scanning transmission electron microscope in combination with numerical simulations, the disorder-driven spatial and spectral localization of the coupled LSP modes that depend on the NP thickness is revealed. Below 0.4 nm sample thickness (flat NPs), localization increases towards higher hybridized LSP mode energies. In comparison, above 10 nm thickness, a decrease of localization (an increase of delocalization) with higher mode energies is observed. In the intermediate thickness regime, a transition of the energy dependence of the localization between the two limiting cases, exhibiting a transition mode energy with minimal localization, is observed. This behavior is mainly driven by the energy and thickness dependence of the polarizability of the individual NPs.

physics.optics↗

Electron-beam-induced modification of gold microparticles in an SEM

Electron-beam-induced conversion of materials in a transmission electron microscope uses the high power density of a localized electron beam of acceleration voltages above 100 kV as an energy source to transform matter at the sub-micron scale. Here, the e-beam-induced transformation of precursor microparticles employing a low-energy e-beam with an acceleration voltage of 30 kV in a scanning electron microscope is developed to increase the versatility and efficiency of the technique. Under these conditions, the technique can be classified between e-beam lithography, where the e-beam is used to mill holes in or grow some different material onto a substrate, and e-beam welding, where matter can be welded together when overcoming the melting phase. Modifying gold microparticles on an amorphous SiOx substrate reveals the dominant role of inelastic electron-matter interaction and subsequent localized heating for the observed melting and vaporization of the precursor microparticles under the electron beam. Monte-Carlo scattering simulations and thermodynamic modeling further support the findings.

cond-mat.mtrl-sci↗

Maximal Anderson Localization and Suppression of Surface Plasmons in Two-Dimensional Random Au Networks

Two-dimensional random metal networks possess unique electrical and optical properties, such as almost total optical transparency and low sheet resistance, which are closely related to their disordered structure. Here we present a detailed experimental and theoretical investigation of their plasmonic properties, revealing Anderson (disorder-driven) localized surface plasmon (LSP) resonances of very large quality factors and spatial localization close to the theoretical maximum, which couple to electromagnetic waves. Moreover, they disappear above a geometry-dependent threshold at ca. 1.7 eV in the investigated Au networks, explaining their large transparencies in the optical spectrum.

physics.optics↗

Revealing the impact of polystyrene-functionalization of Au octahedral nanocrystals of different sizes on formation and structure of mesocrystals

The self-assembly of anisotropic nanocrystals (stabilized by organic capping molecules) with pre-selected composition, size, and shape allows for the creation of nanostructured materials with unique structures and features. For such a material, the shape and packing of the individual nanoparticles play an important role. This work presents a synthesis procedure for ω-thiol-terminated polystyrene (PS-SH) functionalized gold nanooctahedra of variable size (edge length 37, 46, 58, and 72 nm). The impact of polymer chain length (Mw: 11k, 22k, 43k, and 66k g/mol) on the growth of colloidal crystals (e.g. mesocrystals) and their resulting crystal structure is investigated. Small-angle X-ray scattering (SAXS) and scanning transmission electron microscopy (STEM) methods provide a detailed structural examination of the self-assembled faceted mesocrystals based on octahedral gold nanoparticles of different size and surface functionalization. Three-dimensional angular X-ray cross-correlation analysis (AXCCA) enables high-precision determination of the superlattice structure and relative orientation of nanoparticles in mesocrystals. This approach allows us to perform non-destructive characterization of mesocrystalline materials and reveals their structure with resolution down to the nanometer scale.

cond-mat.mtrl-sci↗

Role of substrate clamping on anisotropy and domain structure in the canted antiferromagnet $α$-Fe$_2$O$_3$

Antiferromagnets have recently been propelled to the forefront of spintronics by their high potential for revolutionizing memory technologies. For this, understanding the formation and driving mechanisms of the domain structure is paramount. In this work, we investigate the domain structure in a thin-film canted antiferromagnet $α$-Fe$_2$O$_3$. We find that the internal destressing fields driving the formation of domains do not follow the crystal symmetry of $α$-Fe$_2$O$_3$, but fluctuate due to substrate clamping. This leads to an overall isotropic distribution of the Néel order with locally varying effective anisotropy in antiferromagnetic thin films. Furthermore, we show that the weak ferromagnetic nature of $α$-Fe$_2$O$_3$ leads to a qualitatively different dependence on magnetic field compared to collinear antiferromagnets such as NiO. The insights gained from our work serve as a foundation for further studies of electrical and optical manipulation of the domain structure of antiferromagnetic thin films.

cond-mat.mes-hall↗

Linear colossal magnetoresistance driven by magnetic textures in LaTiO3 thin films on SrTiO3

Linear magnetoresistance (LMR) is of particular interest for memory, electronics, and sensing applications, especially when it does not saturate over a wide range of magnetic fields. One of its principal origins is local mobility or density inhomogeneities, often structural, which in the Parish-Littlewood theory leads to an unsaturating LMR proportional to mobility. Structural disorder, however, also tends to limit the mobility and hence the overall LMR amplitude. An alternative route to achieve large LMR is via non-structural inhomogeneities which do not affect the zero field mobility, like magnetic domains. Here, linear positive magnetoresistance caused by magnetic texture is reported in \ch{LaTiO3}/\ch{SrTiO3} heterostructures. The LMR amplitude reaches up to 6500\% at 9T. This colossal value is understood by the unusual combination of a very high thin film mobility, up to 40 000 cm$^2$/V.s, and a very large coverage of low-mobility regions. These regions correlate with a striped magnetic structure, compatible with a spiral magnetic texture in the \ch{LaTiO3} film, revealed by low temperature Lorentz transmission electron microscopy. These results provide a novel route for the engineering of large-LMR devices.

cond-mat.mes-hall↗

Electron Holographic Mapping of Structural and Electronic Reconstruction at Mono- and Bilayer Steps of h-BN

Here, by making use of medium and high resolution autocorrected off-axis electron holography, we directly probe the electrostatic potential as well as in-plane and out-of-plane charge delocalization at edges and steps in multilayer hexagonal boron nitride. In combination with ab-initio calculations, the data allows to directly reveal the formation of out-of-plane covalent bonds at folded zig-zag edges and steps comprising two monolayers and the absence of which at monolayer steps. The technique paves the way for studying other charge (de)localization phenomena in 2D materials, e.g., at polar edges, topological edge states and defects.

cond-mat.mtrl-sci↗

Axion Mie Theory of Electron Energy Loss Spectroscopy in Topological Insulators

Electronic topological states of matter exhibit novel types of responses to electromagnetic fields. The response of strong topological insulators, for instance, is characterized by a so-called axion term in the electromagnetic Lagrangian which is ultimately due to the presence of topological surface states. Here we develop the axion Mie theory for the electromagnetic response of spherical particles including arbitrary sources of fields, i.e., charge and current distributions. We derive an axion induced mixing of transverse magnetic and transverse electric modes which are experimentally detectable through small induced rotations of the field vectors. Our results extend upon previous analyses of the problem. Our main focus is on the experimentally relevant problem of electron energy loss spectroscopy in topological insulators, a technique that has so far not yet been used to detect the axion electromagnetic response in these materials.

physics.optics↗

Tailoring Plasmonics of Au@Ag Nanoparticles by Silica Encapsulation

Hybrid metallic nanoparticles encapsulated in oxide shells are currently intensely studied for plasmonic applications in sensing, medicine, catalysis, and photovoltaics. Here, we introduce a method for the synthesis of Au@Ag@SiO$_2$ cubes with a uniform silica shell of variable and adjustable thickness in the nanometer range; and we demonstrate their excellent, highly reproducible, and tunable optical response. Varying the silica shell thickness, we could tune the excitation energies of the single nanoparticle plasmon modes in a broad spectral range between 2.55 and 3.25\,eV. Most importantly, we reveal a strong coherent coupling of the surface plasmons at the silver-silica interface with the whispering gallery resonance at the silica-vacuum interface leading to a significant field enhancement at the encapsulated nanoparticle surface in the range of 100\,\% at shell thicknesses $t\,$$\simeq\,$20\,nm. Consequently, the synthesis method and the field enhancement open pathways to a widespread use of silver nanoparticles in plasmonic applications including photonic crystals and may be transferred to other non-precious metals.

physics.optics↗

Extraction of physically meaningful endmembers from STEM spectrum-images combining geometrical and statistical approaches

This article addresses extraction of physically meaningful information from STEM EELS and EDX spectrum-images using methods of Multivariate Statistical Analysis. The problem is interpreted in terms of data distribution in a multi-dimensional factor space, which allows for a straightforward and intuitively clear comparison of various approaches. A new computationally efficient and robust method for finding physically meaningful endmembers in spectrum-image datasets is presented. The method combines the geometrical approach of Vertex Component Analysis with the statistical approach of Bayesian inference. The algorithm is described in detail at an example of EELS spectrum-imaging of a multi-compound CMOS transistor.

physics.data-an↗