arXiv subjects

Alice Galdi

Publications and source records attributed to Alice Galdi.

9 recordsLinked to original sources

arXiv2026

Interfacial properties of MoS2 thin films grown on functional substrates

Interface chemistry and defect formation in MoS2 thin films grown on single crystal substrates critically determine the electronic structure of MoS2 and thus can strongly modify material functionality relevant for many applications, including electronics, optoelectronics, and energy related catalysis. We investigate MoS2 grown on three technologically relevant substrates, namely SrTiO3(111), c-axis Al2O3(0001) and 6H-SiC(0001). Experimental investigations by temperature dependent resistivity, photoemission spectroscopy and scanning transmission electron microscopy with coupled energy dispersive spectroscopy, with the support of theoretical calculation by Density Functional Theory, allow the identification of the substrate induced specific defects and their correlation with the electronic properties. Ti interdiffusion in SrTiO3/MoS2 generates donor like states near the Fermi level, leading to metallic transport. Al2O3/MoS2 exhibits a high density of sulfur related defects that introduce localized states and yield nearly temperature independent conductivity. SiC/MoS2 exhibits significant interface disorder resulting in a semiconducting temperature dependent resistivity, yet deviating from the ideal bulk like behavior. These results demonstrate how substrate choice governs defect formation and ultimately dominates the electronic behavior of MoS2 thin films, making the control of film substrate interactions essential for the engineering of new functional devices.

cond-mat.mtrl-sci↗

arXiv2026

Substrate induced optimization of the Electrocatalytic Hydrogen Evolution Reaction (HER) performances of MoS2 thin film

Molybdenum disulfide (MoS2) has emerged as a promising, cost-effective catalyst for hydrogen production via water splitting. We investigate the structural and electrocatalytic properties of MoS2 thin films deposited on different substrates (Al2O3, SiC, STO) to study their hydrogen evolution reaction (HER) activity. In particular, in order to study the substrate influence on the stabilization of different polymorphic MoS2 phases, the films are synthesised using pulsed laser deposition on substrates with different crystal symmetries and lattice parameters. All the deposited samples are characterized by X-Ray Diffraction, Raman Spectroscopy, Linear Sweep Voltammetry and Electrochemical Impedance Spectroscopy analyses. The films grown on Al2O3 substrates exhibit the best HER performance, likely due to the stabilization of the metastable 1T phase through the interfacial interactions between film and substrate. Presence of the 1T phase in the samples grown on Al2O3 improves the charge transfer efficiency and the electrochemically active surface with a better response to the applied potential, demonstrating their enhanced catalytic behaviour for hydrogen evolution.

cond-mat.mtrl-sci↗

arXiv2026

Quantitative Photoemission Predictions of Semiconducting Photocathodes from Many-Body Ab Initio Theory

The development of high-performance electron sources requires theoretical frameworks that accurately link the microscopic electronic properties of cathode materials to their macroscopic photoemission observables. Here, we present a many-body extension of the three-step photoemission model for semiconducting photocathodes, directly integrating the $GW$ approximation and the solution of the Bethe-Salpeter equation on top of density functional theory (DFT). This approach overcomes the intrinsic limitations of standard DFT by explicitly accounting for quasiparticle and excitonic effects in the photoexcitation process. The quantum efficiency (QE) is evaluated by combining the ab initio absorption with an emission probability derived as an exciton-weighted average. We validate this model on representative alkali antimonides and demonstrate that a qualitative many-body description successfully captures complex spectral features that empirical models fail to reproduce. Furthermore, by incorporating macroscopic optical effects such as thin-film interference and polarization via Fresnel post-processing, we achieve quantitative agreement with experimental QE values without any adjustment. Minor discrepancies near the photoemission threshold are attributed to the idealized surface barrier adopted in the model and impurity effects in the samples, highlighting specific directions for future refinements. This work establishes a robust, parameter-free ab initio tool that bridges microscopic electronic correlation with macroscopic observables, providing a critical pathway for the rational design of next-generation electron sources.

cond-mat.mtrl-sci↗

arXiv2025

Experimental Reconstruction of Source 4D Phase Space Without Prior Knowledge of Transfer Matrix

We experimentally demonstrate a method for reconstructing the transverse 4D phase space of an electron beam at the time of emission from downstream diagnostics of the 4D phase space. This method does not rely on detailed knowledge of the beamline transport, besides assuming that linearity and symplecticity are satisfied. We apply this method to measure the transverse position and momentum phase space of electrons emitted from a spatially-structured alkali-antimonide cathode. This method can uncover local correlations between emission location and momentum spread. We formulate this method analytically and investigate resolution limits.

physics.acc-ph↗

arXiv2025

Triple Evaporation of Bialkali Antimonide Photocathodes and Photoemission Characterization at the PhoTEx Experiment

The development of high-performance photocathodes is essential for generating high-brightness electron beams required by existing and future accelerators. This work introduces a state-of-the-art triple evaporation growth system designed for bialkali antimonide photocathodes. By enabling the simultaneous deposition of all three materials, this system significantly enhances vacuum stability and the reproducibility of photocathode fabrication. Complementing this, the novel characterization system PhoTEx allows spatially and spectrally resolved measurements of key photocathode parameters, such as quantum efficiency (QE), mean transverse energy (MTE), reflectance and lifetime. Crucially, all measurements are performed within a single compact setup, without moving the sample, preserving ultra-high vacuum conditions. The spectral resolved measurement of the reflectance allows the investigation of the color. Photocathode colorimetry may provide valuable insights into material homogeneity and aging. A Na-K-Sb photocathode was grown using the triple evaporation method, achieving an initial QE of $5.5\,\%$ at $520\,$nm. The photocathode was characterized at PhoTEx over two months, demonstrating consistent MTE measurements and a dataset with spectral response, reflectance and colorimetry data. Together, the triple evaporation growth system and PhoTEx mark a significant advancement in optimizing photocathodes with exceptional performance, paving the way for brighter and more stable electron sources for next-generation accelerator facilities.

physics.acc-ph↗

arXiv2024

Temperature-induced hysteretic behavior of resistivity and magnetoresistance of electrodeposited bismuth films for X- ray transition-edge sensor absorbers

This study investigates the temperature-induced hysteretic behavior of resistivity and magnetoresistance in electrodeposited bismuth films, with a focus on their application as absorbers in transition-edge sensors (TESs) for X-ray detection. Through a series of resistance versus temperature measurements from room temperature to a few Kelvins, we explore the change in the conductive behavior of bismuth electrodeposited on various substrates at the various temperatures. Our findings show for the first time both hysteretic and irreversible changes in resistivity as a function of temperature. Further, magnetoresistance measurements reveal notable variations in resistance behavior under different magnetic fields, highlighting the impact of magnetic fields on these films' electronic transport properties, with an indication of potential weak anti-localization effects at the lowest temperatures. This study not only provides a deeper understanding of bismuth's conductivity characteristics at low temperatures but also sheds light on the practical implications for developing more effective TESs for synchrotron X-ray facilities.

physics.ins-det↗

arXiv2022

Operation of Cs-Sb-O activated GaAs in a high voltage DC electron gun at high average current

Negative Electron Affinity (NEA) activated GaAs photocathodes are the most popular option for generating a high current (> 1 mA) spin-polarized electron beam. Despite its popularity, a short operational lifetime is the main drawback of this material. Recent works have shown that the lifetime can be improved by using a robust Cs-Sb-O NEA layer with minimal adverse effects. In this work, we operate GaAs photocathodes with this new activation method in a high voltage environment to extract a high current. We observed spectral dependence on the lifetime improvement. In particular, we saw a 45% increase in the lifetime at 780 nm for Cs-Sb-O activated GaAs compared to Cs-O activated GaAs.

physics.acc-ph↗

arXiv2020

Computational Synthesis of Substrates by Crystal Cleavage

The discovery of novel substrate materials has been dominated by trial and error, opening the opportunity for a systematic search. To identify stable crystal surfaces, we generate bonding networks for materials from the Materials Project database with one to five atoms in the primitive unit cell. For three-dimensional crystals in this set, we systematically break up to three bonds in the bonding network of the primitive cell. Successful cleavage reduces the bonding network to two periodic dimensions, creating a layer of the cleaved crystal. We identify 4,693 unique cleavage surfaces across 2,133 bulk crystals, 4,626 of which have a maximum Miller index of 1. To characterize the likelihood of cleavage and the thermodynamic stability of the cleaved surfaces, we create monolayers of these surfaces and calculate the work of cleavage and the partially-relaxed surface energy using density functional theory to discover 3,991 potential substrates, 2,307 of which do not contain f-valence electrons and 2,183 of which are derived from a bulk precursor with an entry in the Inorganic Crystal Structure Database. Following, we identify distinct trends in the work of cleavage of these layers and relate them to metallic and covalent/ionic bonding of the three-dimensional precursor. We also assembled a database of commercially available substrates and show that the database of predicted substrates significantly enhances the diversity and range of the distribution of electronic properties and lattice parameters, providing opportunities for the epitaxial growth of many materials. We illustrate the potential impact of the substrate database by identifying several new epitaxial substrates for the transparent conductor BaSnO3, which exhibit low cleavage energies and result in strains an order of magnitude lower than currently used substrates.

cond-mat.mtrl-sci↗

arXiv2019

Improved lifetime of a high spin polarization superlattice photocathode

Negative Electron Affinity (NEA) activated surfaces are required to extract highly spin polarized electron beams from GaAs-based photocathodes, but they suffer extreme sensitivity to poor vacuum conditions that results in rapid degradation of quantum efficiency. We report on series of unconventional NEA activations on surfaces of bulk GaAs with Cs, Sb, and O2 using different methods of oxygen exposure for optimizing photocathode performance. One order of magnitude improvement in lifetime with respect to the standard Cs-O2 activation is achieved without significant loss on electron spin polarization and quantum efficiency by codepositing Cs, Sb, and O2. A strained GaAs/GaAsP superlattice sample activated with the codeposition method demonstrated similar enhancement in lifetime near the photoemission threshold while maintaining 90% spin polarization.

physics.app-ph↗