arXiv subjects

A. Lee Swindlehurst

Publications and source records attributed to A. Lee Swindlehurst.

At least 145 records · Page 8Linked to original sources

arXiv2020

Linear and Deep Neural Network-based Receivers for Massive MIMO Systems with One-Bit ADCs

The use of one-bit analog-to-digital converters (ADCs) is a practical solution for reducing cost and power consumption in massive Multiple-Input-Multiple-Output (MIMO) systems. However, the distortion caused by one-bit ADCs makes the data detection task much more challenging. In this paper, we propose a two-stage detection method for massive MIMO systems with one-bit ADCs. In the first stage, we propose several linear receivers based on the Bussgang decomposition, that show significant performance gain over existing linear receivers. Next, we reformulate the maximum-likelihood (ML) detection problem to address its non-robustness. Based on the reformulated ML detection problem, we propose a model-driven deep neural network-based (DNN-based) receiver, whose performance is comparable with an existing support vector machine-based receiver, albeit with a much lower computational complexity. A nearest-neighbor search method is then proposed for the second stage to refine the first stage solution. Unlike existing search methods that typically perform the search over a large candidate set, the proposed search method generates a limited number of most likely candidates and thus limits the search complexity. Numerical results confirm the low complexity, efficiency, and robustness of the proposed two-stage detection method.

eess.SP↗

arXiv2020

On the Effect of Mutual Coupling in One-Bit Spatial Sigma-Delta Massive MIMO Systems

The one-bit spatial Sigma-Delta concept has recently been proposed as an approach for achieving low distortion and low power consumption for massive multi-input multi-output systems. The approach exploits users located in known angular sectors or spatial oversampling to shape the quantization noise away from desired directions of arrival. While reducing the antenna spacing alleviates the adverse impact of quantization noise, it can potentially deteriorate the performance of the massive array due to excessive mutual coupling. In this paper, we analyze the impact of mutual coupling on the uplink spectral efficiency of a spatial one-bit Sigma-Delta massive MIMO architecture, and compare the resulting performance degradation to standard one-bit quantization as well as the ideal case with infinite precision. Our simulations show that the one-bit Sigma-Delta array is particularly advantageous in space-constrained scenarios, can still provide significant gains even in the presence of mutual coupling when the antennas are closely spaced.

cs.IT↗

arXiv2020

Spectral Efficiency of One-Bit Sigma-Delta Massive MIMO

We examine the uplink spectral efficiency of a massive MIMO base station employing a one-bit Sigma-Delta sampling scheme implemented in the spatial rather than the temporal domain. Using spatial rather than temporal oversampling, and feedback of the quantization error between adjacent antennas, the method shapes the spatial spectrum of the quantization noise away from an angular sector where the signals of interest are assumed to lie. It is shown that, while a direct Bussgang analysis of the Sigma-Delta approach is not suitable, an alternative equivalent linear model can be formulated to facilitate an analysis of the system performance. The theoretical properties of the spatial quantization noise power spectrum are derived for the Sigma-Delta array, as well as an expression for the spectral efficiency of maximum ratio combining (MRC). Simulations verify the theoretical results and illustrate the significant performance gains offered by the Sigma-Delta approach for both MRC and zero-forcing receivers.

cs.IT↗

arXiv2020

3D UAV Trajectory and Communication Design for Simultaneous Uplink and Downlink Transmission

In this paper, we investigate the unmanned aerial vehicle (UAV)-aided simultaneous uplink and downlink transmission networks, where one UAV acting as a disseminator is connected to multiple access points, and the other UAV acting as a base station (BS) collects data from numerous sensor nodes. The goal of this paper is to maximize the sum of the UAV-BS and UAV-AP system throughput by jointly optimizing the 3D UAV trajectory, communication scheduling, and UAV-AP/SN transmit power. We first consider a special case where the UAV-BS and UAV-AP trajectories are pre-determined. Although the resulting problem is an integer and non-convex optimization problem, a globally optimal solution is obtained by applying the polyblock outer approximation (POA) method based on the problem's hidden monotonic structure. Subsequently, for the general case considering the 3D UAV trajectory optimization, an efficient iterative algorithm is proposed to alternately optimize the divided sub-problem based on the successive convex approximation (SCA) technique. Numerical results demonstrate that the proposed design is able to achieve significant system throughput gain over the benchmarks. In addition, the SCA-based method can achieve nearly the same performance as the POA based method with much lower computational complexity.

cs.IT↗

arXiv2020

SVM-based Channel Estimation and Data Detection for One-Bit Massive MIMO Systems

The use of low-resolution Analog-to-Digital Converters (ADCs) is a practical solution for reducing cost and power consumption for massive Multiple-Input-Multiple-Output (MIMO) systems. However, the severe nonlinearity of low-resolution ADCs causes significant distortions in the received signals and makes the channel estimation and data detection tasks much more challenging. In this paper, we show how \textit{Support Vector Machine} (\textit{SVM}), a well-known supervised-learning technique in machine learning, can be exploited to provide efficient and robust channel estimation and data detection in massive MIMO systems with one-bit ADCs. First, the problem of channel estimation for uncorrelated channels is formulated as a conventional SVM problem. The objective function of this SVM problem is then modified for estimating spatially correlated channels. Next, a two-stage detection algorithm is proposed where SVM is further exploited in the first stage. The performance of the proposed data detection method is very close to that of Maximum-Likelihood (ML) data detection when the channel is perfectly known. We also propose an SVM-based joint Channel Estimation and Data Detection (CE-DD) method, which makes use of both the to-be-decoded data vectors and the pilot data vectors to improve the estimation and detection performance. Finally, an extension of the proposed methods to OFDM systems with frequency-selective fading channels is presented. Simulation results show that the proposed methods are efficient and robust, and also outperform existing ones.

eess.SP↗

arXiv2019

Throughput Maximization for UAV-aided Backscatter Communication Networks

This paper investigates unmanned aerial vehicle (UAV)-aided backscatter communication (BackCom) networks, where the UAV is leveraged to help the backscatter device (BD) forward signals to the receiver. Based on the presence or absence of a direct link between BD and receiver, two protocols, namely transmit-backscatter (TB) protocol and transmit-backscatter-relay (TBR) protocol, are proposed to utilize the UAV to assist the BD. In particular, we formulate the system throughput maximization problems for the two protocols by jointly optimizing the time allocation, reflection coefficient and UAV trajectory. Different static/dynamic circuit power consumption models for the two protocols are analyzed. The resulting optimization problems are shown to be non-convex, which are challenging to solve. We first consider the dynamic circuit power consumption model, and decompose the original problems into three sub-problems, namely time allocation optimization with fixed UAV trajectory and reflection coefficient, reflection coefficient optimization with fixed UAV trajectory and time allocation, and UAV trajectory optimization with fixed reflection coefficient and time allocation. Then, an efficient iterative algorithm is proposed for both protocols by leveraging the block coordinate descent method and successive convex approximation (SCA) techniques. In addition, for the static circuit power consumption model, we obtain the optimal time allocation with a given reflection coefficient and UAV trajectory and the optimal reflection coefficient with low computational complexity by using the Lagrangian dual method. Simulation results show that the proposed protocols are able to achieve significant throughput gains over the compared benchmarks.

cs.IT↗

arXiv2019

Secure Communication for Spatially Sparse Millimeter-Wave Massive MIMO Channels via Hybrid Precoding

In this paper, we investigate secure communication over sparse millimeter-wave (mm-Wave) massive multiple-input multiple-output (MIMO) channels by exploiting the spatial sparsity of legitimate user's channel. We propose a secure communication scheme in which information data is precoded onto dominant angle components of the sparse channel through a limited number of radio-frequency (RF) chains, while artificial noise (AN) is broadcast over the remaining nondominant angles interfering only with the eavesdropper with a high probability. It is shown that the channel sparsity plays a fundamental role analogous to secret keys in achieving secure communication. Hence, by defining two statistical measures of the channel sparsity, we analytically characterize its impact on secrecy rate. In particular, a substantial improvement on secrecy rate can be obtained by the proposed scheme due to the uncertainty, i.e., "entropy", introduced by the channel sparsity which is unknown to the eavesdropper. It is revealed that sparsity in the power domain can always contribute to the secrecy rate. In contrast, in the angle domain, there exists an optimal level of sparsity that maximizes the secrecy rate. The effectiveness of the proposed scheme and derived results are verified by numerical simulations.

cs.IT↗

arXiv2019

Rethinking Secure Precoding via Interference Exploitation: A Smart Eavesdropper Perspective

Based on the concept of constructive interference (CI), multiuser interference (MUI) has recently been shown to be beneficial for communication secrecy. A few CI-based secure precoding algorithms have been proposed that use both the channel state information (CSI) and knowledge of the instantaneous transmit symbols. In this paper, we examine the CI-based secure precoding problem with a focus on smart eavesdroppers that exploit statistical information gleaned from the precoded data for symbol detection. Moreover, the impact of correlation between the main and eavesdropper channels is taken into account. We first modify an existing CI-based preocding scheme to better utilize the destructive impact of the interference. Then, we point out the drawback of both the existing and the new modified CI-based precoders when faced with a smart eavesdropper. To address this deficiency, we provide a general principle for precoder design and then give two specific design examples. Finally, the scenario where the eavesdropper's CSI is unavailable is studied. Numerical results show that although our modified CI-based precoder can achieve a better energy-secrecy trade-off than the existing approach, both have a limited secrecy benefit. On the contrary, the precoders developed using the new CI-design principle can achieve a much improved trade-off and significantly degrade the eavesdropper's performance.

cs.IT↗

arXiv2019

Optimized Transmission for Parameter Estimation in Wireless Sensor Networks

A central problem in analog wireless sensor networks is to design the gain or phase-shifts of the sensor nodes (i.e. the relaying configuration) in order to achieve an accurate estimation of some parameter of interest at a fusion center, or more generally, at each node by employing a distributed parameter estimation scheme. In this paper, by using an over-parametrization of the original design problem, we devise a cyclic optimization approach that can handle tuning both gains and phase-shifts of the sensor nodes, even in intricate scenarios involving sensor selection or discrete phase-shifts. Each iteration of the proposed design framework consists of a combination of the Gram-Schmidt process and power method-like iterations, and as a result, enjoys a low computational cost. Along with formulating the design problem for a fusion center, we further present a consensus-based framework for decentralized estimation of deterministic parameters in a distributed network, which results in a similar sensor gain design problem. The numerical results confirm the computational advantage of the suggested approach in comparison with the state-of-the-art methods---an advantage that becomes more pronounced when the sensor network grows large.

eess.SP↗

arXiv2019

Supervised and Semi-Supervised Learning for MIMO Blind Detection with Low-Resolution ADCs

The use of low-resolution analog-to-digital converters (ADCs) is considered to be an effective technique to reduce the power consumption and hardware complexity of wireless transceivers. However, in systems with low-resolution ADCs, obtaining channel state information (CSI) is difficult due to significant distortions in the received signals. The primary motivation of this paper is to show that learning techniques can mitigate the impact of CSI unavailability. We study the blind detection problem in multiple-input-multiple-output (MIMO) systems with low-resolution ADCs using learning approaches. Two methods, which employ a sequence of pilot symbol vectors as the initial training data, are proposed. The first method exploits the use of a cyclic redundancy check (CRC) to obtain more training data, which helps improve the detection accuracy. The second method is based on the perspective that the to-be-decoded data can itself assist the learning process, so no further training information is required except the pilot sequence. For the case of 1-bit ADCs, we provide a performance analysis of the vector error rate for the proposed methods. Based on the analytical results, a criterion for designing transmitted signals is also presented. Simulation results show that the proposed methods outperform existing techniques and are also more robust.

eess.SP↗

arXiv2019

Secure Massive MIMO Communication with Low-resolution DACs

In this paper, we investigate secure transmission in a massive multiple-input multiple-output (MIMO) system adopting low-resolution digital-to-analog converters (DACs). Artificial noise (AN) is deliberately transmitted simultaneously with the confidential signals to degrade the eavesdropper's channel quality. By applying the Bussgang theorem, a DAC quantization model is developed which facilitates the analysis of the asymptotic achievable secrecy rate. Interestingly, for a fixed power allocation factor $ϕ$, low-resolution DACs typically result in a secrecy rate loss, but in certain cases they provide superior performance, e.g., at low signal-to-noise ratio (SNR). Specifically, we derive a closed-form SNR threshold which determines whether low-resolution or high-resolution DACs are preferable for improving the secrecy rate. Furthermore, a closed-form expression for the optimal $ϕ$ is derived. With AN generated in the null-space of the user channel and the optimal $ϕ$, low-resolution DACs inevitably cause secrecy rate loss. On the other hand, for random AN with the optimal $ϕ$, the secrecy rate is hardly affected by the DAC resolution because the negative impact of the quantization noise can be compensated for by reducing the AN power. All the derived analytical results are verified by numerical simulations.

cs.IT↗

arXiv2018

Interference Exploitation Precoding for Multi-Level Modulations: Closed-Form Solutions

In this paper, we study closed-form interference-exploitation precoding for multi-level modulations in the downlink of multi-user multiple-input single-output (MU-MISO) systems. We consider two distinct cases: first, for the case where the number of served users is not larger than the number of transmit antennas at the base station (BS), we mathematically derive the optimal precoding structure based on the Karush-Kuhn-Tucker (KKT) conditions. By formulating the dual problem, the precoding problem for multi-level modulations is transformed into a pre-scaling operation using quadratic programming (QP) optimization. We further consider the case where the number of served users is larger than the number of transmit antennas at the BS. By employing the pseudo inverse, we show that the optimal solution of the pre-scaling vector is equivalent to a linear combination of the right singular vectors corresponding to zero singular values, and derive the equivalent QP formulation. We also present the condition under which multiplexing more streams than the number of transmit antennas is achievable. For both considered scenarios, we propose a modified iterative algorithm to obtain the optimal precoding matrix, as well as a sub-optimal closed-form precoder. Numerical results validate our derivations on the optimal precoding structures for multi-level modulations, and demonstrate the superiority of interference-exploitation precoding for both scenarios.

cs.IT↗

arXiv2018

1-Bit Massive MIMO Downlink Based on Constructive Interference

In this paper, we focus on the multiuser massive multiple-input single-output (MISO) downlink with low-cost 1-bit digital-to-analog converters (DACs) for PSK modulation, and propose a low-complexity refinement process that is applicable to any existing 1-bit precoding approaches based on the constructive interference (CI) formulation. With the decomposition of the signals along the detection thresholds, we first formulate a simple symbol-scaling method as the performance metric. The low-complexity refinement approach is subsequently introduced, where we aim to improve the introduced symbol-scaling performance metric by modifying the transmit signal on one antenna at a time. Numerical results validate the effectiveness of the proposed refinement method on existing approaches for massive MIMO with 1-bit DACs, and the performance improvements are most significant for the low-complexity quantized zero-forcing (ZF) method.

eess.SP↗

arXiv2018

Spectral Efficiency of Mixed-ADC Massive MIMO

We study the spectral efficiency (SE) of a mixed-ADC massive MIMO system in which K single-antenna users communicate with a base station (BS) equipped with M antennas connected to N high-resolution ADCs and M-N one-bit ADCs. This architecture has been proposed as an approach for realizing massive MIMO systems with reasonable power consumption. First, we investigate the effectiveness of mixed-ADC architectures in overcoming the channel estimation error caused by coarse quantization. For the channel estimation phase, we study to what extent one can combat the SE loss by exploiting just N << M pairs of high-resolution ADCs. We extend the round-robin training scheme for mixed-ADC systems to include both high-resolution and one-bit quantized observations. Then, we analyze the impact of the resulting channel estimation error in the data detection phase. We consider random high-resolution ADC assignment and also analyze a simple antenna selection scheme to increase the SE. Analytical expressions are derived for the SE for maximum ratio combining (MRC) and numerical results are presented for zero-forcing (ZF) detection. Performance comparisons are made against systems with uniform ADC resolution and against mixed-ADC systems without round-robin training to illustrate under what conditions each approach provides the greatest benefit.

cs.IT↗

arXiv2018

Reconsidering Linear Transmit Signal Processing in 1-Bit Quantized Multi-User MISO Systems

In this contribution, we investigate a coarsely quantized Multi-User (MU)-Multiple Input Single Output (MISO) downlink communication system, where we assume 1-Bit Digital-to-Analog Converters (DACs) at the Base Station (BS) antennas. First, we analyze the achievable sum rate lower-bound using the Bussgang decomposition. In the presence of the non-linear quanization, our analysis indicates the potential merit of reconsidering traditional signal processing techniques in coarsely quantized systems, i.e., reconsidering transmit covariance matrices whose rank is equal to the rank of the channel. Furthermore, in the second part of this paper, we propose a linear precoder design which achieves the predicted increase in performance compared with a state of the art linear precoder design. Moreover, our linear signal processing algorithm allows for higher-order modulation schemes to be employed.

cs.IT↗

arXiv2018

Joint Transmit and Receive Filter Optimization for Sub-Nyquist Delay-Doppler Estimation

In this article, a framework is presented for the joint optimization of the analog transmit and receive filter with respect to a parameter estimation problem. At the receiver, conventional signal processing systems restrict the two-sided bandwidth of the analog pre-filter $B$ to the rate of the analog-to-digital converter $f_s$ to comply with the well-known Nyquist-Shannon sampling theorem. In contrast, here we consider a transceiver that by design violates the common paradigm $B\leq f_s$. To this end, at the receiver, we allow for a higher pre-filter bandwidth $B>f_s$ and study the achievable parameter estimation accuracy under a fixed sampling rate when the transmit and receive filter are jointly optimized with respect to the Bayesian Cramér-Rao lower bound. For the case of delay-Doppler estimation, we propose to approximate the required Fisher information matrix and solve the transceiver design problem by an alternating optimization algorithm. The presented approach allows us to explore the Pareto-optimal region spanned by transmit and receive filters which are favorable under a weighted mean squared error criterion. We also discuss the computational complexity of the obtained transceiver design by visualizing the resulting ambiguity function. Finally, we verify the performance of the optimized designs by Monte-Carlo simulations of a likelihood-based estimator.

cs.IT↗

arXiv2018

Quantized Constant Envelope Precoding with PSK and QAM Signaling

Coarsely quantized massive Multiple-Input Multiple-Output (MIMO) systems are gaining more interest due to their power efficiency. We present a new precoding technique to mitigate the Multi-User Interference (MUI) and the quantization distortions in a downlink Multi-User (MU) MIMO system with coarsely Quantized Constant Envelope (QCE) signals at the transmitter. The transmit signal vector is optimized for every desired received vector taking into account the QCE constraint. The optimization is based on maximizing the safety margin to the decision thresholds of the receiver constellation modulation. Simulation results show a significant gain in terms of the uncoded Bit Error Ratio (BER) compared to the existing linear precoding techniques.

cs.IT↗

arXiv2017

mmWave Massive MIMO with Simple RF and Appropriate DSP

There is considerable interest in the combined use of millimeter-wave (mmwave) frequencies and arrays of massive numbers of antennas (massive MIMO) for next-generation wireless communications systems. A symbiotic relationship exists between these two factors: mmwave frequencies allow for densely packed antenna arrays, and hence massive MIMO can be achieved with a small form factor; low per-antenna SNR and shadowing can be overcome with a large array gain; steering narrow beams or nulls with a large array is a good match for the line-of-sight (LOS) or near-LOS mmwave propagation environments, etc.. However, the cost and power consumption for standard implementations of massive MIMO arrays at mmwave frequencies is a significant drawback to rapid adoption and deployment. In this paper, we examine a number of possible approaches to reduce cost and power at both the basestation and user terminal, making up for it with signal processing and additional (cheap) antennas. These approaches include lowresolution Analog-to-Digital Converters (ADCs), wireless local oscillator distribution networks, spatial multiplexing and multistreaming instead of higher-order modulation etc.. We will examine the potential of these approaches in making mmwave massive MIMO a reality and discuss the requirements in terms of digital signal processing (DSP).

cs.IT↗