arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · cond-mat/0506738

Differences of interface and bulk transport properties in polymer field-effect devices

S. Grecu·M. Roggenbuck·A. Opitz·W. Bruetting
View original source ↗Read source document ↗Export metadata ↓

Abstract

The influence of substrate treatment with self-assembled monolayers and thermal annealing was analysed by electrical and structural measurements on field-effect transistors (FETs) and metal-insulator-semiconductor (MIS) diodes using poly(3-hexylthiophene) (P3HT) as a semiconducting polymer and Si/SiO2 wafers as a substrate. It is found that surface treatment using silanising agents like hexamethyldisilazane (HMDS) and octadecyltrichlorosi-lane (OTS) can increase the field-effect mobility by up to a factor of 50, reaching values in saturation of more than 4E-2 cm^2/Vs at room temperature. While there is a clear correlation between the obtained field-effect mobility and the contact angle of water on the treated substrates, X-ray diffraction and capacitance measurements on MIS diodes show that structural and electrical properties in the bulk of the P3HT films are not influenced by the surface treatment. On the other hand, thermal annealing is found to cause an increase of grain size, bulk relaxation frequency and thereby of the mobility perpendicular to the SiO2/P3HT interface, but has very little influence on the field-effect mobility. Temperature dependent investigations on MIS diodes and FETs show that the transport perpendicular to the substrate plane is thermally activated and can be described by hopping in a Gaussian density of states, whereas the field-effect mobility in the substrate plane is almost temperature independent over a wide range. This investigations reveal significant differ-ences between interface and bulk transport properties in polymer field-effect devices.

Explore related subjects

cond-mat.soft

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

S. Grecu, M. Roggenbuck, A. Opitz, W. Bruetting. 2006-03-22. Differences of interface and bulk transport properties in polymer field-effect devices. https://doi.org/10.1016/j.orgel.2006.03.005

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Scale dependent chirality in twist-bend liquid crystals

The discovery of new classes of lyotropic and thermotropic liquid crystals (e.g., twist-bend, splay, and ferroelectric phases), together with significant advances in experimental techniques for their investigation, has renewed interest in a number of physical phenomena that have been studied in classical liquid crystals (nematics, cholesterics, and smectics) for more than a century. In this paper, we revisit one such ''old--new'' problem, recently highlighted in the preprint by A. Ashkinazi, H. Chhabra, A. El Moumane, M. M. C. Tortora, and J. P. K. Doye, ''Chirality Transfer in Lyotropic Twist-Bend Nematics,'' arXiv:2508.03544v1 (2025), in which various mechanisms of chirality transfer from the molecular scale to the structural scale were discussed. Here we present a simple theoretical analysis of chirality transfer within a Landau theory describing the phase transition between cholesteric and chiral twist-bend liquid crystals. We demonstrate that the handedness of the heliconical structure is opposite to that of the parent cholesteric phase. This relationship originates from the orthogonality between the cholesteric director and the vector order parameter characterizing the phase.

cond-mat.soft↗
arXiv2026

Why life is hot

The process of evolution by natural selection leads to phenotypes of increasing fitness. For cellular chemical reaction networks, this means optimising a variety of fitness functions such as robustness, precision, or sensitivity to external stimuli. We argue that these diverse goals can be achieved by a versatile, generic mechanism: coupling chemical reaction networks to reservoirs that are strongly out of equilibrium. Using theory and numerics we show that this mechanism of optimisation comes at the price of significant heat dissipation. We compute the heat flux caused by kinetic proofreading in {\it Escherichia coli} and show that it constitutes a significant fraction of the total heat flux experimentally measured in this model organism. We then demonstrate that the degree of optimality achievable saturates, and that Nature appears to operate near saturation despite high energetic costs. We argue that `life is hot' largely because of the need for a versatile mechanism to optimise a variety of fitness functions.

cond-mat.soft↗
arXiv2026

Understanding Structural Representation in Foundation Models for Polymers

From the relative scarcity of training data to the lack of standardized benchmarks, the creation of effective foundation models for polymers faces significant and multi-faceted challenges. At the core, many of these issues are tied directly to the structural representation of polymers. Here, we present a chemical language foundation model built on using a SMILES-based polymer graph representation (CPG) that incorporates polymer architectural features and connectivity that are often missing in other line notations. This foundation model exhibited excellent performance on 30 different polymer property benchmark datasets. Critical evaluation of the developed representation against other variations in control experiments reveals this approach to be a robust method of representing polymers in language-based foundation models. These experiments also reveal a strong invariance of structural representations to small perturbations, with many variations of structural representation exceeding or equaling state-of-the-art (SOTA) performance. Surprisingly, SMILES representations which are chemically or semantically invalid also provided near or SOTA performance in several instances--underscoring an unexamined blind spot in the development of chemistry language models. Examination of error sources and attention maps for the evaluated structural representations corroborate the findings of the control experiments, highlighting the ability of the model to interpolate SMILES sequence space in a manner that is loosely congruent to chemical and architectural space for polymers. Overall, this work highlights the surprising robustness of chemistry language models to structural representation perturbations and identifies the conditions under which CPG representation provides meaningful advantages.

cond-mat.soft↗