arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2611.00211

Magnetoelectric Wireless Power Transfer Receivers for Sub-Millimeter Scale Implantable Bioelectronics

Jonathan Tan·Serene Feng·Thomas Mion·Sydney Acosta·Konrad Bussmann·Peter Finkel·Roy Olsson
View original source ↗Read source document ↗Export metadata ↓

Abstract

Implanted biomedical devices for continuous physiological monitoring require reliable wireless power delivery to anatomically constrained and sensitive sites where batteries are impractical or hazardous. Existing wireless power transfer (WPT) modalities, including inductive coils and ultrasonic transducers suffer from performance degradation as receiver dimensions are miniaturized, limiting their application for space-limited locations such as fingertips, the ocular cavity, and intracranial sites. We present a microelectromechanical systems (MEMS) magnetoelectric WPT receiver integrating piezoelectric aluminum scandium nitride and magnetostrictive iron-cobalt/silver multilayer thin-films, microfabricated within a footprint of 770 x 360 x 2.25 micrometers. The receiver operates at its 100 kHz flexural-mode resonance with a quality factor of 1180 and delivers 1.0 microwatt to a matched 10 kohm load under a standard-compliant 205 micro-Tesla RMS excitation field. This device exhibits a magnetoelectric coefficient of 1274 V cm-1 Oe-1 and a power figure of merit (FOMP) of 4.05 x 10-3 mW cm-3 Oe-2 Hz-1, both the highest reported values of comparable magnetoelectric WPT receivers. The FOM is 20-fold higher than the next best comparable-frequency device. These miniaturized devices establish MEMS magnetoelectric transduction as a scalable platform for battery-free wireless powering of microwatt-class implants in the most anatomically demanding regions of the body.

Explore related subjects

physics.app-ph

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Jonathan Tan, Serene Feng, Thomas Mion, Sydney Acosta, Konrad Bussmann, Peter Finkel, Roy Olsson. 2026-10-30. Magnetoelectric Wireless Power Transfer Receivers for Sub-Millimeter Scale Implantable Bioelectronics. https://arxiv.org/abs/2611.00211

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Differentiable topology optimization for high-fidelity acoustic holography beyond the thin-element approximation

Acoustic holography in the megahertz range can impact applications from manufacturing and non-destructive testing to transcranial ultrasound. Designing lens topologies for complex holograms in the sub-megahertz to low-megahertz regime most relevant to transcranial therapy is difficult because wave propagation through an acoustically thick lens cannot be ignored. Here we show that the heterogeneous angular spectrum approach (HASA), which admits in-plane varying speed-of-sound maps and supports rapid differentiable optimization with the Adam optimizer, can generate three-dimensional lens topologies directly. With it we quantify the failure of the thin-element approximation (TEA) at these frequencies, where lenses enter an acoustically thick regime (thickness L much greater than the wavelength) governed by refractive walk-off, and we introduce a dimensionless refractive walk-off number Nw that defines a frequency-dependent operating regime. Topology optimization outperformed TEA-based design in all 45 configurations tested, with the largest structural gains at or below 1 MHz; for high-numerical-aperture designs the fidelity at 1 MHz matched that at 2 MHz, while structural similarity was highest at 0.5 MHz. The sub-megahertz to low-megahertz window is therefore a favorable operating regime for high-fidelity transcranial holography rather than one to be avoided. Free-field hydrophone measurements of 3D-printed lenses reproduced the designed patterns, and because the framework also accounts for aberration in heterogeneous media, patient-specific lenses corrected skull-induced aberration in simulation and ex vivo experiment, generalized across skull segments, and shaped volumetric beams through the human skull. Together these results provide a framework for designing simple, economical, and high-performance ultrasound systems.

physics.app-ph↗
arXiv2026

Low-Terahertz Channel Performance in Falling Wheat for Moisture Sensing

Terahertz (THz) waves are highly sensitive to water and therefore offer a promising noncontact approach to wheat moisture sensing, but existing THz studies have been limited to static samples. This article investigates moisture sensing based on the performance of a THz channel in falling wheat, as encountered at grain intake. The channel power loss is measured at six frequencies from 120 to 320 GHz for three moisture contents and interpreted with a physics-based model that couples the double-Debye permittivity of water, Landau-Lifshitz-Looyenga mixing, and Lorenz-Mie extinction. The model reproduces the measured loss. Above the extinction maximum, the dielectric moisture response peaks where the wavelength approaches the kernel diameter, and that a two-frequency loss ratio removes the loading dependence. A channel-level analysis of QPSK and 16-QAM links shows that a 1 dB moisture-induced loss change alters the bit error rate (BER) by a factor of 3 to 30. THz communication channels at grain intake could therefore sense moisture as a byproduct of data transmission.

physics.app-ph↗
arXiv2026

Periodically poled lithium niobate with submicrometer periodicity using electric-field poling technique

A series of monocrystalline lithium niobate (LN) thin films on low-resistivity silicon (LNOS) substrates, with thicknesses ranging from micrometers down to tens of nanometers, were prepared through chemical-mechanical polishing of pristine crystal films. By employing the electric-field poling technique, high-quality periodically poled lithium niobate (PPLN) structures with submicrometer periodicity were fabricated in these LNOSs, and full-thickness polarization reversal beneath the poling electrodes with a well-defined depth profile was achieved. The coercive field was found to follow the Kay-Dunn scaling law, while the lateral domain broadening generally increased with increasing film thickness, and it remained approximately constant across different electrode linewidths at a given film thickness. PPLN structures with periods ranging from 6 $μ$m down to 200 nm were demonstrated. These findings provide guidance for poling electrode design and lateral domain broadening pre-compensation, offering a practical route toward scalable domain engineering in LN thin films with promising potential for compact and highly integrated nonlinear photonic devices.

physics.app-ph↗