arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2610.31004

Efficient Modeling of 3D-Printed Freeform Waveguides with a Transformation Optics-Based Beam Propagation Method

Sina Foroutan-Barenji·Jonas Krimmer·Stefan Singer·Christian Koos·Wolfgang Freude
View original source ↗Read source document ↗Export metadata ↓

Abstract

An efficient numerical method is introduced for simulating wave propagation in 3D-printed freeform waveguides, referred to as photonic wire bonds (PWBs). This approach integrates transformation optics (TO) with curvilinear meshing to map the original 3D freeform PWB structure onto a straight waveguide, which possesses anisotropic material characteristics. The resulting waveguide is then analyzed using an anisotropic full-vectorial beam propagation method (BPM). To validate the performance and effectiveness of the proposed TO-BPM algorithm, a comparison is made with the finite-difference time-domain (FDTD) technique. Our approach reduces the simulation time by more than two orders of magnitude, depending on the degree of trajectory bending, in combination with a mean absolute percentage error (MAPE) of 3.9% in power transmission simulation relative to the FDTD.

Explore related subjects

physics.optics

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Sina Foroutan-Barenji, Jonas Krimmer, Stefan Singer, Christian Koos, Wolfgang Freude. 2026-10-22. Efficient Modeling of 3D-Printed Freeform Waveguides with a Transformation Optics-Based Beam Propagation Method. https://doi.org/10.1364/oe.610722

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Efficient third-harmonic generation in high-Q tantalum pentoxide microcavities

Nonlinear harmonic generation in microcavities offers a compelling route toward energy efficient on-chip short-wavelength coherent light sources, enabled by tight optical confinement within compact mode volumes and flexible dispersion engineering. Tantalum pentoxide (Ta2O5) photonic platforms are particularly promising for realizing such nonlinear processes: their broad transparency window (280-8000 nm) supports broadband operation, their large bandgap suppresses two-photon absorption, and their thick-film deposition capability enables dispersion management--features that can collectively enhance the performance of nonlinear light sources. Here, we demonstrate, to the best of our knowledge, the first efficient third-harmonic generation (THG) in high-Q Ta2O5 microcavities. These microcavities feature smooth surfaces and high loaded Q factors up to 2.67X10^6, thereby facilitating nonlinear interactions. Through dispersion engineering, efficient THG is realized in both suspended microdisks and monolithic microrings under telecom-band continuous-wave laser pumping, as confirmed by optical spectra, visible-light microscopy, and the near-cubic pump-power dependence of the conversion efficiency. This work lays a foundation for chip-scale f-3f self-referencing of frequency combs and next-generation integrated nonlinear photonics.

physics.optics↗
arXiv2026

Alignment-Free Optical Combining with Scalar-Message Expectation Propagation Detection for Distributed Multi-Aperture Coherent Reception

We propose an alignment-free distributed multi-aperture optical receiver with a single coherent front end, in which the differential delays between apertures are large. The branch signals are optically combined without inter-branch delay or phase alignment. Large differential delays produce separated tap clusters, forming a sparse ISI channel with long memory. Scalar-message expectation propagation exploits this sparsity to recover the transmitted symbols. Simulations show lower BER than equal-area single-aperture reception and no clear BER degradation over the tested delay spans. As the maximum differential delay increases from 100.5 to 200.5 symbol periods, the channel span nearly doubles, while the factor-graph edge count increases by only about 1.5\%. The trade-off is higher BER than ideal coherent combining schemes in exchange for fewer coherent front ends than digital combining and no inter-branch delay or phase alignment before optical combining.

physics.optics↗
arXiv2026

Metasurface engineering of transient photothermal responses for vibrational imaging at living interfaces

Chemical transformations at biological interfaces are central to cellular function, yet the weak vibrational signals associated with subtle molecular changes limit their spatially resolved observation. Here, we present metasurface-driven mid-infrared photothermal imaging (MetaMIP), which uses resonantly engineered metasurfaces to amplify molecular temperature modulation while retaining rapid thermal recovery. Visible-light detection converts this response into submicrometre maps of individual nanoparticles and biological cells. In living cells, MetaMIP resolves spatially distinct chemical changes during enzymatic lipid conversion across the cell membrane. These results demonstrate the potential of engineered photothermal interfaces for mapping chemical composition and tracking its evolution during reactions.

physics.optics↗