Pulse Shape Model for a Light Enhanced Phonon Detector

G. Angloher; M. R. Bharadwaj; A. Böhmer; S. Braun; M. R. Cababie; I. Colantoni; I. Dafinei; N. Di Marco; C. Dittmar; F. Ferella; F. Ferroni; S. Fichtinger; A. Filipponi; M. Friedl; D. Fuchs; L. Gai; M. Gapp; M. Heikinheimo; K. Heim; M. N. Hughes; K. Huitu; M. Kellermann; A. Mancuso; L. Pagnanini; F. Petricca; C. Petrucci; S. Pirro; F. Pröbst; G. Profeta; A. Puiu; F. Reindl; K. Schäffner; J. Schieck; P. Schreiner; C. Schwertner; P. Settembri; K. Shera; M. Stahlberg; A. Stendahl; M. Stukel; C. Tresca; S. Yue; V. Zema; Y. Zhu; L. Ziegele; N. Zimmermann; O. Schulz

arXiv · 2610.28161

Pulse Shape Model for a Light Enhanced Phonon Detector

View original source ↗Read source document ↗Export metadata ↓

Abstract

COSINUS has tested prototype NaI-based cryogenic scintillating calorimeters with a composite design, in which the transition edge sensor (TES) is fabricated on a separate carrier crystal coupled to the NaI target. Measurements with the composite detectors showed deviations from the known pulse shape description for cryogenic calorimeters and did not reveal an identifiable nuclear recoil population during a neutron calibration. In this work we present a new pulse shape model which provides an explanation to these observations and that laid the foundation for the development of the final COSINUS phonon detector design named remote TES (remoTES). We demonstrate that the first COSINUS detector prototypes featured a phonon channel with signal enhancement by light absorption in the carrier, namely a light enhanced phonon detector. This design offers for the first time the chance to use a single channel phonon detector for particle discrimination. We present recent results using a novel pulse shape fitting method based on the Bayesian inference software package BAT.jl.

Explore related subjects

physics.ins-det hep-ex

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

G. Angloher, M. R. Bharadwaj, A. Böhmer, S. Braun, M. R. Cababie, I. Colantoni, I. Dafinei, N. Di Marco, C. Dittmar, F. Ferella, F. Ferroni, S. Fichtinger, A. Filipponi, M. Friedl, D. Fuchs, L. Gai, M. Gapp, M. Heikinheimo, K. Heim, M. N. Hughes, K. Huitu, M. Kellermann, A. Mancuso, L. Pagnanini, F. Petricca, C. Petrucci, S. Pirro, F. Pröbst, G. Profeta, A. Puiu, F. Reindl, K. Schäffner, J. Schieck, P. Schreiner, C. Schwertner, P. Settembri, K. Shera, M. Stahlberg, A. Stendahl, M. Stukel, C. Tresca, S. Yue, V. Zema, Y. Zhu, L. Ziegele, N. Zimmermann, O. Schulz. 2026-10-20. Pulse Shape Model for a Light Enhanced Phonon Detector. https://arxiv.org/abs/2610.28161

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

P-ONE-1: the first detector line of the Pacific Ocean Neutrino Experiment

Neutrino telescopes instrument optically transparent media with three-dimensional arrays of photosensors to detect Cherenkov radiation induced by neutrino interactions within or near the instrumented volume. The small cross-sections of the weak interaction and the low neutrino fluxes above TeV energies require vast detector volumes, which only natural media on Earth can realistically provide. Spurred by the detection of the first neutrino sources by the IceCube Neutrino Observatory, a new generation of neutrino telescopes is emerging to increase the global instrumented volume and detection sensitivity. The Pacific Ocean Neutrino Experiment (P-ONE) aims to install such a telescope in the Northeast Pacific Ocean, building on established neutrino telescope design targets in collaboration with Ocean Networks Canada (ONC). This article presents the design, integration, and testing of the first P-ONE line, P-ONE-1, in preparation for its deployment and integration into ONC's deep-sea observatory NEPTUNE. Alongside the detector design and integration methods, we detail in-air and in-water system-level validation performed at several test sites in Canada, culminating in the successful construction of P-ONE-1 and its preparation for deployment.

physics.ins-det↗

arXiv2026

Ultra-Fast 4H-SiC AC-LGAD for 4D Tracking Applications

4H-SiC low gain avalanche detectors (LGADs) combine internal gain with the high carrier saturation drift velocity, thermal stability, and low leakage current of SiC. AC-coupled readout (AC-LGAD) adds position information to the precise timing, which enables 4D tracking. This work reports the first experimental demonstration of a 4H-SiC AC-LGAD. Devices with a $1.0\times1.0$~mm$^2$ active area and a $2\times2$ array of AC-coupled pads at a pitch of 500~$μ$m were fabricated with two gain-layer doping concentrations, $4\times10^{17}$ and $5\times10^{17}$~cm$^{-3}$, and characterized with a 375~nm ultraviolet transient current technique (UV-TCT) scanning setup. The hit position and time were reconstructed with the conventional discretized positioning circuit (DPC) and constant fraction discrimination (CFD) methods. They were also reconstructed with a transformer-based neural network, which processes the full waveforms of the four pads through a shared encoder and formulates timing as a per-sample segmentation task. With DPC and CFD, the best position and time resolutions are about 10~$μ$m and 20~ps. The neural network mitigates the nonlinear distortions near the device edges and improves the position resolution to below 5~$μ$m and the time resolution to about 15~ps, improvements of more than 60\% and 30\%, respectively. The higher-doped device reaches a high signal-to-noise ratio at lower bias and keeps good performance at low laser intensities. These results demonstrate the potential of 4H-SiC AC-LGADs for 4D tracking in future collider experiments.

physics.ins-det↗

arXiv2026

Characterization of CharTPix-180A, a strip-shaped monolithic sensor for the STCF inner tracker

The Super Tau-Charm Facility (STCF) is a future high-luminosity electron-positron collider operating in the center-of-mass energy range of 2 to 7 GeV. The monolithic active pixel sensor (MAPS) is one of the options being considered for the STCF inner tracking detector. This application requires a MAPS capable of providing simultaneous position, time, and charge measurements under a constrained power budget of approximately 50 $\rm mW/cm^2$. To address these requirements, a baseline sensor concept featuring a strip-shaped pixel geometry has been proposed to balance power consumption and detection performance. The first prototypes of this concept, referred to as CharTPix-180A, have been developed to evaluate the proposed design. Two prototypes with different design focuses were characterized in this study. An analog readout prototype, CharTPix-180A-c4, was used to evaluate the intrinsic sensor behavior, while a fully functional digital readout prototype, CharTPix-180A-c3, was used to investigate the overall sensor functionality on a small scale. Electrical, radioactive-source, and beam tests were performed to characterize the prototypes. The measured detection efficiency exceeded 99%, the fake-hit rate was below $10^{-3}$ /pixel/s, and the spatial resolution was better than 10 $\rmμm$. A best time resolution of 37 ns was achieved, and the power consumption was about 50 $\rm mW/cm^2$. These results support the feasibility of the strip-shaped MAPS concept for the STCF inner tracker and provide guidance for further design optimization.

physics.ins-det↗