arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2610.05607

Emergency Obstacle Avoidance Maneuvers in Differential-Drive Mobile Robots

Kautik Mandve·Nilay Kant
View original source ↗Read source document ↗Export metadata ↓

Abstract

Emergency obstacle avoidance requires a mobile robot to brake or change its heading within the available distance. This paper investigates the dependence of maneuver performance and odometric error on approach speed for a differential-drive robot. A footprint-clearance analysis and a normalized wheel-motion index provide a kinematic description of five braking and turning maneuvers. The principal experiment comprises 540 block-randomized trials on tile, of which 539 are retained, at commanded approach speeds of 45, 55, and 65 cm/s. An overhead camera provides an independent pose reference. When encoder, gyro, and camera heading changes are evaluated over complete motion records, the mean encoder discrepancy increases by 4.7-5.1 degrees for the two reverse-spin maneuvers between the lowest and highest speeds; the arc and brake-assisted pivot change by less than 0.4 degrees. Larger encoder discrepancy is associated with lower avoidance success after adjustment for distance, speed, maneuver, day, and turn direction. Gyro discrepancies remain approximately 3 degrees for the reverse spins. Estimated reaction distances for 90% success and their uncertainty quantify the maneuver trade-offs. The results support speed-specific empirical characterization of emergency maneuvers and distinguish encoder error from recovery motion and measurement-window mismatch.

Explore related subjects

cs.ROcs.SYeess.SY

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Kautik Mandve, Nilay Kant. 2026-10-04. Emergency Obstacle Avoidance Maneuvers in Differential-Drive Mobile Robots. https://arxiv.org/abs/2610.05607

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Disambiguate Gripper State in Grasp-Based Tasks: Pseudo-Tactile as Feedback Enables Pure Simulation Learning

Grasp-based manipulation tasks are fundamental to robots interacting with their environments, yet gripper state ambiguity significantly reduces the robustness of imitation learning policies for these tasks. Data-driven solutions face the challenge of high real-world data costs, while simulation data, despite its low costs, is limited by the sim-to-real gap. We identify the root cause of gripper state ambiguity as the lack of tactile feedback. To address this, we propose a novel approach employing pseudo-tactile as feedback, inspired by the idea of using a force-controlled gripper as a tactile sensor. This method enhances policy robustness without additional data collection and hardware involvement, while providing a noise-free binary gripper state observation for the policy and thus facilitating pure simulation learning to unleash the power of simulation. Experimental results across three real-world grasp-based tasks demonstrate the necessity, effectiveness, and efficiency of our approach.

cs.RO↗
arXiv2026

Video Replanning via Latent Embedding Refinement and Rejection-Based Sampling

Video planning has emerged as a flexible framework for robot manipulation, in which a generative model predicts a video of task completion, and a downstream module translates the predicted frames into actions. However, existing methods typically ignore information from past interactions, limiting their ability to adapt to latent physical properties that can only be revealed through trial and error, such as whether a door should be pushed or pulled, or how friction affects object dynamics. When a plan fails, these methods usually replan from scratch without leveraging the information revealed by the failure. To address this limitation, we introduce RELIC, REplanning with Latent embedding refInement and Candidate rejection, a video planning framework that adapts to hidden physical properties from test-time failures. RELIC optimizes a latent embedding that captures the environment's hidden physical properties from interaction videos and introduces a rejection-based sampling mechanism that filters out hypotheses inconsistent with prior failures. Across eight tasks in two simulation suites, RELIC consistently reduces the number of replanning steps required for success, and linear probes show that its embedding captures the hidden parameters from the interaction itself rather than from scene appearance. Across four challenging real-world robotic manipulation tasks involving hidden interaction modes, e.g., friction, center of mass, and object mass, RELIC raises the one-shot replanning success rate of a video planning baseline from 30.0% to 63.8% after a single physical interaction.

cs.RO↗
arXiv2026

Least Restrictive Hyperplane Control Barrier Functions

Control Barrier Functions (CBFs) can provide provable safety guarantees for dynamic systems. However, finding a valid CBF for a system of interest is often non-trivial, especially for systems with low computational resources, higher-order dynamics, and moving close to obstacles of complex shape. A common solution to this problem is to use a purely distance-based CBF. In this paper, we study Hyperplane CBFs (H-CBFs), where a hyperplane separates the agent from the obstacle. First, we note that the common distance-based CBF is a special case of an H-CBF where the hyperplane is a supporting hyperplane of the obstacle that is orthogonal to a line between the agent and the closest point of the obstacle. We then show that a less conservative CBF can be found by optimising over the orientation of the supporting hyperplane, in order to find the Least Restrictive Hyperplane CBF. This enables us to maintain the safety guarantees while allowing controls that are closer to the desired ones, especially when moving fast and passing close to obstacles. We illustrate the approach on a double integrator dynamical system with acceleration constraints, moving through a group of arbitrarily shaped static and moving obstacles, and show that the proposed approach reduces the average gap between desired and safe controls by an order of magnitude.

cs.RO↗