arXiv subjects

Nilay Kant

Publications and source records attributed to Nilay Kant.

8 recordsLinked to original sources

arXiv2026

State Observers with Prescribed Output Error Bounds

This paper presents a state observer design for continuous linear time-invariant (LTI) systems subject to unknown bounded disturbances that enforces a prescribed bound on the observer output error (residual). The proposed observer augments a Luenberger observer with state resets triggered when the residual norm reaches a prescribed bound. The reset map guarantees contraction of the residual at jump instants, forward invariance of the prescribed residual envelope, and strict decrease of the estimation-error Lyapunov function at every reset, while preserving the uniform boundedness properties of a standard Luenberger observer. Notably, the observer design does not require knowledge of the disturbance bound. Simulation results confirm the analysis: the residual remains within the prescribed bound, whereas a standard Luenberger observer with the same gains violates this bound.

eess.SY↗

arXiv2026

Learning Local Optimal Controller for a Class of Nonlinear Systems via Impulse-Supervised Exploration

This paper develops an impulse-supervised confined exploration framework for learning local optimal controller for a class of nonlinear systems. The proposed approach combines continuous-time approximate dynamic programming (ADP) with an impulsive supervisory layer, where impulsive braking confines the state within a prescribed region in which a local linear approximation of the nonlinear system is valid. This enables desired persistent excitation required for parameter convergence while preventing large state deviations that invalidate local optimality. The resulting hybrid closed-loop system enforces invariance of the exploration region through state-triggered braking inputs. Simulation results on a nonlinear mechanical system demonstrate effectiveness of the proposed approach.

eess.SY↗

arXiv2026

Dynamics of the Thermomagnetic Pendulum

A thermomagnetic pendulum is introduced as a coupled thermo-magnetic-mechanical system consisting of a ferromagnetic bob under gravity and an offset permanent magnet. Heating drives the bob temperature above and below the Curie point, causing magnetic attraction to vanish and recover as the bob moves and cools. A multiphysics model is developed in which the magnetic torque depends nonlinearly on the bob temperature field and pendulum configuration. The formulation couples transient three-dimensional heat transfer, a temperature-dependent magnetization law, and pendulum dynamics. Simulations show angular torque asymmetry, rapid force reduction near the Curie point, and sustained oscillations.

eess.SY↗

arXiv2024

Modeling Human Strategy for Flattening Wrinkled Cloth Using Neural Networks

This paper explores a novel approach to model strategies for flattening wrinkled cloth learning from humans. A human participant study was conducted where the participants were presented with various wrinkle types and tasked with flattening the cloth using the fewest actions possible. A camera and Aruco marker were used to capture images of the cloth and finger movements, respectively. The human strategies for flattening the cloth were modeled using a supervised regression neural network, where the cloth images served as input and the human actions as output. Before training the neural network, a series of image processing techniques were applied, followed by Principal Component Analysis (PCA) to extract relevant features from each image and reduce the input dimensionality. This reduction decreased the model's complexity and computational cost. The actions predicted by the neural network closely matched the actual human actions on an independent data set, demonstrating the effectiveness of neural networks in modeling human actions for flattening wrinkled cloth.

cs.CV↗

arXiv2022

Stabilization of Energy-Conserving Gaits for Point-Foot Planar Bipeds

The problem of designing and stabilizing impact-free, energy-conserving gaits is considered for underactuated, point-foot planar bipeds. Virtual holonomic constraints are used to design energy-conserving gaits. A desired gait corresponds to a periodic hybrid orbit and is stabilized using the Impulse Controlled Poincaré Map approach. Numerical simulations for the case of a five-link biped demonstrate convergence to a desired gait from arbitrary initial conditions.

eess.SY↗

arXiv2022

Nonprehensile Manipulation of a Stick Using Impulsive Forces

The problem of nonprehensile manipulation of a stick in three-dimensional space using intermittent impulsive forces is considered. The objective is to juggle the stick between a sequence of configurations that are rotationally symmetric about the vertical axis. The dynamics of the stick is described by five generalized coordinates and three control inputs. Between two consecutive configurations where impulsive inputs are applied, the dynamics is conveniently represented by a Poincaré map in the reference frame of the juggler. Stabilization of the orbit associated with a desired juggling motion is accomplished by stabilizing a fixed point on the Poincaré map. The Impulse Controlled Poincaré Map approach is used to stabilize the orbit, and numerical simulations are used to demonstrate convergence to the desired juggling motion from an arbitrary initial configuration. In the limiting case, where consecutive rotationally symmetric configurations are chosen arbitrarily close, it is shown that the dynamics reduces to that of steady precession of the stick on a hoop.

eess.SY↗

arXiv2020

Planar Symmetric Juggling of a Devil-Stick

Juggling a devil-stick can be described as a problem of non-prehensile manipulation. Assuming that the devil-stick remains confined to the vertical plane, the problem of juggling the stick between two symmetric configurations is considered. Impulsive forces are applied to the stick intermittently and the impulse of the force and its point of application are modeled as control inputs to the system. The dynamics of the devil-stick due to the impulsive forces and gravity is described by half-return maps between two Poincare sections; the symmetric configurations are fixed points of these sections. A coordinate transformation is used to convert the juggling problem to that of stabilization of one of the fixed points. Inclusion of the coordinate transformation in the dynamic model results in a nonlinear discrete-time system. A dead-beat design for one of the inputs simplifies the control problem and results in a linear time-invariant discrete-time system. Standard control techniques are used to show that symmetric juggling can be achieved from arbitrary initial conditions.

eess.SY↗

arXiv2020

Orbital Stabilization of Underactuated Systems using Virtual Holonomic Constraints and Impulse Controlled Poincare Maps

The problem of orbital stabilization of underactuated mechanical systems with one passive degree-of-freedom (DOF) is revisited. Virtual holonomic constraints are enforced using a continuous controller; this results in a dense set of closed orbits on a constraint manifold. A desired orbit is selected on the manifold and a Poincare section is constructed at a fixed point on the orbit. The corresponding Poincare map is linearized about the fixed point; this results in a discrete linear time-invariant system. To stabilize the desired orbit, impulsive inputs are applied when the system trajectory crosses the Poincare section; these inputs can be designed using standard techniques such as LQR. The Impulse Controlled Poincare Map (ICPM) based control design has lower complexity and computational cost than control designs proposed earlier. The generality of the ICPM approach is demonstrated using the 2-DOF cart-pendulum and the 3-DOF tiptoebot.

eess.SY↗