arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2610.01602

Open-Source Live-Reconfigurable Multi-Mode Wearable Ultrasound

Cédric Hirschi·Federico Villani·Luca Benini·Andrea Cossettini
View original source ↗Read source document ↗Export metadata ↓

Abstract

Wearable ultrasound enables continuous deep-tissue monitoring, and a single programmable probe can operate in multiple complementary modes, such as structural A-mode and Doppler flow measurement. However, each operating mode requires dedicated measurement parameters and peripheral states, with no single configuration serving all modes on resource-constrained devices. Time multiplexing of operating modes introduces reconfiguration latency that lowers the effective mode repetition rate. To address this limitation, we present an open-source, transition-aware control stack for low-latency, in-session reconfiguration of the 32-channel TinyProbe wearable platform. Operating modes are described as hardware configurations, and host-side shadow registers track the peripheral states, enabling transition-specific register updates. Transition sequences are executed either by the host (over Wi-Fi 6) or by a firmware loop on the probe MCU. We validate the stack on a pulsatile-flow phantom by interleaving blocks of 25 to 100 pulsed-wave Doppler shots at 1.43 kHz PRF with single 16-channel A-mode acquisitions, changing channel configurations at every transition. Compared to full reconfiguration, the overhead per transition decreases from 30.2 ms to 11.6 ms (host-scheduled) and 3.1 ms (MCU-scheduled). For 75-shot Doppler blocks, the multi-mode repetition rate reaches 16.0 Hz (MCU-scheduled), 90.1% of the theoretical maximum of 17.7 Hz. Concurrent reconstruction of a Doppler spectrogram and a lumen-diameter trace demonstrates the functionality of time-multiplexed flow and structural monitoring.

Explore related subjects

eess.SPcs.AR

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Cédric Hirschi, Federico Villani, Luca Benini, Andrea Cossettini. 2026-10-01. Open-Source Live-Reconfigurable Multi-Mode Wearable Ultrasound. https://arxiv.org/abs/2610.01602

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Unrolled RF Holographic Imaging: Structured Sparsity and Low-Rank EM Model Adaptation

Radio-Frequency (RF) holographic imaging reconstructs a volumetric map of the permittivity contrast from phase-coherent samples of the scattered electromagnetic (EM) field. The resulting inverse problem is severely ill-posed, as the receivers are orders of magnitude fewer than the unknown 3D volume elements (voxels). It is classically regularized by sparsity-promoting solvers such as the Iterative Shrinkage-Thresholding Algorithm (ISTA). Two assumptions limit these solvers: the L1 penalty is spatially uniform, and the EM forward model is typically approximated as a linear operator. This paper revisits the problem through algorithm unrolling, in which the solver iterations become the layers of a compact trainable network that preserves the EM forward model and learns only a few interpretable parameters from limited data. Building on the Learned ISTA (LISTA), a Weighted LISTA (W-LISTA) is first proposed, which learns a spatially-varying L1 regularization, steering the sparsity prior towards target shapes consistent with the deployment. Second, the Low-Rank Weighted LISTA (LoRaW-LISTA) applies a low-rank adaptation (LoRa) of the holographic operator to compensate for model mismatches from linearized EM approximations. Both methods are validated on full-wave EM simulations and on a 2.45GHz indoor measurement campaign with human-body phantoms. Combining the spatially-varying regularization with the low-rank adaptation of the EM model improves the signal-to-clutter ratio by about 70% over the ISTA and LISTA baselines, recovering structural details where classical iterative solvers fail. Inference takes less than 30s to reconstruct 1m^3 of scene on conventional GPUs. The proposed tools are rapidly adaptable building blocks for the sensing layer of emerging smart radio environments.

eess.SP↗
arXiv2026

Spatial Thickness Mapping in Heterogeneous Plate Using Wave Physics-Informed Regression

Traditional guided wave methods for structural health monitoring typically assume uniform material properties, which limit their ability to characterize heterogeneous structures with spatially varying thickness, damage, or material properties. These are challenges commonly encountered in corrosion assessment, composite delamination detection, and structural degradation monitoring. This paper presents a wave physics-informed regression approach that enables spatially resolved characterization of material properties by extracting local dispersion curves across a structure. Our approach focuses on a highly interpretable but flexible physics-informed framework that can be solved using fast algorithms and achieve robust numerical solutions. This paper discusses the mathematical design of the framework, the algorithm, and its interpretation. The framework was applied to a guided wave wavefield imaging dataset from a thin aluminum plate with non-uniform thickness around a hole to validate its practicality. The framework creates an accurate thickness map (correlation coefficient 0.94 with x-ray CT validation) as well as extracts the frequency-dependent velocities of waves within those regions.

eess.SP↗
arXiv2026

Physics-Guided Bayesian Optimization for High-Dimensional Mixed-Variable MIMO Base Station Design

This paper proposes a physics-guided Bayesian optimization for high-dimensional mixed-variable multiple-input and multiple-output (MIMO) base station (BS) design. The considered problem jointly selects a subset of candidate sites for BS deployment and optimizes the azimuth angles, downtilt angles, and transmit power spectral densities of the BSs, while each configuration is evaluated using computationally expensive site-specific ray tracing. To efficiently optimize the system configuration, the proposed method constructs a low-cost physics-based proxy from precomputed propagation information. The proxy-estimated communication coverage is used as the Gaussian process (GP) prior mean, and a residual GP with three-dimensional physical features learns the discrepancy between the proxy and full evaluations. Ray-tracing-based evaluations in two urban scenarios show that the proposed method achieves up to approximately 15 percentage points higher coverage than conventional and high-dimensional optimization baselines under the same evaluation budget.

eess.SP↗