arXiv ScienceSearch

arXiv · 2609.20552

Mineral Detection of Neutrinos and Dark Matter 2026 Proceedings

Abstract

The fourth "Mineral Detection of Neutrinos and Dark Matter" (MDvDM'26) meeting was held April 14-17, 2026 in Karlsruhe, Germany, hosted by the Institute for Astroparticle Physics (IAP) at Karlsruhe Institute of Technology (KIT). These proceedings detail the contributions that were presented during MDvDM'26, illustrating the unprecedented progress in theoretical, computational and experimental studies towards the realization of the concept of mineral detectors. Mineral detectors represent an emerging particle detection concept that has risen in prominence in recent years due to the advent of modern computational and high-resolution microscopy techniques. Natural and synthetic crystals are capable of retaining microscopic damage features induced by nuclear recoils, which could be then read out with a variety of micrometer and nanometer resolution microscopy techniques. On laboratory time scales mineral detectors could be employed for reactor neutrino monitoring and dark matter detection, with the potential to measure the directions as well as the energies of the induced nuclear recoils. Uniquely, ancient natural crystals (so-called paleo-detectors) that have been recording nuclear recoils over geological timescales could be used for studying astrophysical neutrinos, cosmic rays, dark matter and heavy exotic particles, as well as the variation of their fluxes over our Galaxy's lifetime. In recent years the international MDvDM community has been successfully tackling the challenges associated with realizing the concept of mineral detectors, opening the pathway towards a fully fledged experimental program and potential future discoveries.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Alexey Elykov, Patrick Stengel, Natsue Abe, Daniel Ang, Lorenzo Apollonio, Levente Balogh, Laura Baudis, Chinmay Bharathulwar, Priyanshu Bhattacharya, Yilda Boukhtouchen, Joseph Bramante, Vincent Breton, Andrew Buchanan, Jens Burkhart, Lorenzo Caccianiga, Andrew Calabrese-Day, Mason Camp, Jordan Chapman, Anson Cook, Reza Ebadi, Denis Erkal, Katherine Freese, Audrey Fung, Shota Futamura, Claudio Galelli, Kevin Gao, Peter W. Graham, Thomas Haddock, Minako Hashiguchi, Alexander Hayes, Adam A. Hecht, Samuel C. Hedges, Shigenobu Hirose, Luisa M. Hötzsch, Patrick Huber, Yohei Igami, Vsevolod Ivanov, Florian Jörg, Ayuki Kamada, Takenori Kato, Yoji Kawamura, Katharina Kehl, Chris Kelso, Holger Kluck, Emilie M. LaVoie-Ingram, Matthew Leybourne, Gavishta H. M. Liyanage, Thalles Lucas, Brenden A. Magill, Paolo Magnani, Jennika McIntosh, Naoki Mizutani, Kohta Murase, Tatsuhiro Naka, Lina Necib, Pranav Parvathaneni, Andre Peterson, Zachary S. C. Picker, Rabeya Rabu, Harikrishnan Ramani, Anupam Ray, Morteza Roostaeinia, Hannah Ross, Issei Saikyo, Lukas Scherne, Maximilian Shen, Aaron Shugar, Joshua Spitz, Kai Sun, Jiashen Tang, Erwin H. Tanin, Dionysios P. Theodosopoulos, Yoichi Usui, Pieter Vermeesch, Aaron Vincent, Ronald Walsworth, Jin-Wei Wang, David Waters, Samuel S. Y. Wong, Audrey Wu, Gregory Wurtz, Wen Yin, Xiuyuan Zhang, Zhexian Zhang. 2026-09-17. Mineral Detection of Neutrinos and Dark Matter 2026 Proceedings. https://arxiv.org/abs/2609.20552

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

TCAD + Allpi$\text{x}^2$ Simulation study of MALTA2, a Depleted Monolithic Active Pixel Sensor for future tracking

In this work, a hybrid simulation framework combining TCAD and Allpi$\text{x}^2$ is presented to investigate the sensor properties of MALTA2, a depleted monolithic active pixel sensor designed for future tracking. The study starts from 3D modeling and transient simulations in TCAD, with generic doping profiles and simple well structures. The resulting doping profiles and electric field are extracted and fed into Allpi$\text{x}^2$ for high-statistics Monte Carlo simulations in both DUT-only and full-telescope mode. Simulations reveal a strong dependence of sensor performance, specifically the detection efficiency and cluster size, on the doping concentration of the N-type blanket at the sensor surface. The doping concentration is then optimized by comparing simulations with measurement data. The active depth of the depleted region of the MALTA2 sensor is estimated in both simulations and measurements using a grazing angle method, in which the sensor is positioned at various inclinations relative to the beam, covering angles from 0 to 60 degrees. Excellent agreement on active depth is obtained with the optimal doping concentration, showing a deviation of 2\% from the measured value at a threshold of 450\,$\text{e}^-$. Consequently, the framework offers a generic toolkit for sensor studies without requiring proprietary information.

physics.ins-det

A compact fibre-coupled active beamstop for fast time-resolved monitoring of synchrotron X-ray beams

We have developed a compact fibre-coupled active beamstop for simultaneous interception and time-resolved monitoring of the direct X-ray beam in synchrotron diffraction experiments. The complete beamstop tip has a maximum transverse dimension of 1 mm and incorporates a 700 $μ$m-wide Ce:YAG scintillator. The scintillator converts the intercepted X-rays into visible light, which is transported through a multimode optical fibre to a silicon photodiode at the bottom of the blade that is connected to a dedicated fast amplifier electronics. Tests with a pulsed laser yielded a system decay time of 69.4 ns, consistent with reported luminescence decay times for Ce:YAG. Measurements at the P14.EH2 end station of PETRA III demonstrated the detection of individual bunch signals separated by 192 ns in the 40-bunch operating mode. The active beamstop also provided an in-situ timing signal for synchronising an experimental sequence with the approximately 190 $μ$s transmission window of a mechanical X-ray chopper. The device therefore combines a compact obstruction of the direct beam with fast monitoring of X-ray timing and flux during diffraction data acquisition.

physics.ins-det

Charge-Carrier transport simulations in diamond detectors with electric-field-dependent mobility and charge-collection-distance-based trapping

Diamond detectors are attractive for operation in harsh radiation environments because they combine radiation tolerance, fast signal formation, and low leakage current. Realistic detector-response simulations require an accurate description of charge-carrier mobility and trapping, which determine both signal amplitude and timing. In this work, we extend \allpix{}, a modular end-to-end detector simulation framework, with diamond-specific transport models. The implementation includes field-dependent mobility parameterizations for electrons and holes and an effective trapping model based on the charge collection distance (CCD), providing a detector-level interface to material quality and radiation-damage measurements. The mobility description is validated in the negligible-trapping limit using single-crystalline CVD diamond by comparing simulated drift velocities and transient-current signals with published reference data. For polycrystalline CVD diamond, the CCD-based trapping model is evaluated using experimentally measured CCD values and compared with laboratory transient-current-technique waveforms. The simulations reproduce the measured drift-velocity behavior in scCVD and the reduced charge collection and degraded transient response observed in pcCVD. The presented implementation enables detector-level studies of charge collection, pulse formation, and timing performance in diamond sensors using experimentally accessible transport and trapping parameters, and provides a practical framework for simulation-driven detector development and radiation-damage studies.

physics.ins-det