arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2509.22021

Background stability and annual modulation test using PICOLON ultra-pure NaI(Tl) detector

PICOLON Collaboration·K. Kotera·D. Chernyak·H. Ejiri·. K. Fushimi·K. Hata·R. Hazama·T. Iida·H. Ikeda·K. Imagawa·K. Inoue·H. Ito·T. Kishimoto·M. Koga·A. Kozlov·K. Nakamura·R. Orito·T. Shima·Y. Takemoto·S. Umehara·Y. Urano·K. Yasuda·S. Yoshida
View original source ↗Read source document ↗Export metadata ↓

Abstract

The dark matter observation claimed by the DAMA/LIBRA experiment has been a long-standing puzzle within the particle physics community. NaI(Tl) crystals with radiopurity comparable to DAMA/LIBRA's are essential for adequate verification. Existing experiments using NaI(Tl) target have been hampered by the high radioactivity concentration of NaI(Tl) crystals. PICOLON experiment conducts an independent search for Weakly Interacting Massive Particles using highest purity NaI(Tl) crystals. In 2020, the NaI(Tl) crystal (Ingot#85) reached the same purity level as DAMA/LIBRA crystals. The DAMA/LIBRA group has stressed that verifying their signal requires high-purity NaI(Tl) crystals with long-term stability. Based on a six-month measurement, we have confirmed the long-term stability of its radiopurity. This stability provides a significant advantage for future efforts to adequately verify the DAMA/LIBRA result using NaI(Tl) crystal. In this paper, we present the background stability of purity in the Ingot#94 NaI(Tl) detector, which was produced using the Ingot#85 purification method, along with the first annual modulation search conducted by the PICOLON experiment.

Explore related subjects

physics.ins-detastro-ph.IM

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

PICOLON Collaboration, K. Kotera, D. Chernyak, H. Ejiri, . K. Fushimi, K. Hata, R. Hazama, T. Iida, H. Ikeda, K. Imagawa, K. Inoue, H. Ito, T. Kishimoto, M. Koga, A. Kozlov, K. Nakamura, R. Orito, T. Shima, Y. Takemoto, S. Umehara, Y. Urano, K. Yasuda, S. Yoshida. 2025-11-07. Background stability and annual modulation test using PICOLON ultra-pure NaI(Tl) detector. https://doi.org/10.1093/ptep%2Fptaf160

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Development of an Extensible Unified Control System Using the STARS Framework and Common Commands for Detector Control

A zooming optical system comprising two Fresnel zone plates (FZPs) was developed and installed at the AR-NE1A beamline of the Photon Factory, High Energy Accelerator Research Organization (KEK), Japan. To ensure reliable and versatile operation, we implemented a dedicated control architecture based on the Simple Transmission and Retrieval System (STARS) framework and the newly proposed STARS Common Commands for Detector Control (CCDC)---a data-acquisition (DAQ) state model and command set designed specifically for detector control. The system serves both as a practical control system for the zooming optics and as a demonstration of modular extensibility using STARS and detector interoperability through CCDC. The system has been commissioned, and its performance has been verified at the AR-NE1A beamline. The architecture enables flexible configuration of optical components and provides a unified interface for both routine operation and advanced experimental protocols.

physics.ins-det↗
arXiv2026

Agentic TCAD Calibration Workflow for Oxide Semiconductor Transistors

Experimental TCAD calibration is essential for predictive technology modeling of emerging oxide semiconductor transistors. However, it remains time-consuming and expert dependent because of model ambiguity. Multiple physical models and parameter sets can reproduce the same measured transfer characteristics, while local fitting alone cannot uniquely identify the underlying device physics. We present the first demonstration of an agentic TCAD calibration workflow for a fabricated bottom-gate In--W--O (BG-IWO) transistor. Starting from the measured transfer curve and device information, the workflow uses measurement--TCAD residuals and local sensitivity tests to select bounded parameter corrections or evaluate additional physical models, and accept only updates that improve device metrics. The LLM agent orchestrates the workflow, while Sentaurus governs the device physics. For the 2\%-W reference device, five agent-suggested updates yield a fixed calibrated model, reducing the multi-metric device objective $J$ by 14.3$\times$. Maximum $V_{\mathrm{th}}$/$I_{\mathrm{on}}$ errors are 36.1~mV/0.022 decade for varying-drain-bias tests and 46.2~mV/0.062 decade for varying-channel-length tests, demonstrating model transferability across bias and geometry rather than a local parameter fit. W-composition tests provide process-sensitive insight. This agentic workflow provides a faster route to model development for emerging device technologies.

physics.ins-det↗
arXiv2026

Birefringence of AlGaAs/GaAs Coatings under Above-Band-Gap Illumination, GR Noise and Photo-Optic Transfer Function

AlGaAs/GaAs coatings are being considered as coating candidates for gravitational-wave detectors. In this paper we investigate the birefringence properties of this crystalline semiconductor material by modulating the optical illumination on the mirror coating and monitoring the induced birefringence. While the measured low-frequency birefringence values align with previous studies, we observed a frequency-dependent behavior in the illumination-to-birefringence coupling, characterized by a pole increasing with illumination intensity and a gain at zero frequency (DC gain) decreasing with illumination intensity. We developed a generic theoretical model based on a master equation to characterize the measurement results by considering photon-induced electric fields and electro-optic effects. This model can fit the frequency and intensity dependencies of the induced birefringence. Additionally, this model predicts a generation-recombination noise (GR noise) will be observable in the coating birefringence. While the presented measurement cannot predict the exact level of GR noise, for the frequency band and spot sizes relevant for gravitational-wave detectors we expect GR noise to be white below the pole frequency, scale with power the same way laser shot noise does, and for fixed power be independent of spot size.

physics.ins-det↗