arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2303.17742

MemPool: A Scalable Manycore Architecture with a Low-Latency Shared L1 Memory

Samuel Riedel·Matheus Cavalcante·Renzo Andri·Luca Benini
View original source ↗Read source document ↗Export metadata ↓

Abstract

Shared L1 memory clusters are a common architectural pattern (e.g., in GPGPUs) for building efficient and flexible multi-processing-element (PE) engines. However, it is a common belief that these tightly-coupled clusters would not scale beyond a few tens of PEs. In this work, we tackle scaling shared L1 clusters to hundreds of PEs while supporting a flexible and productive programming model and maintaining high efficiency. We present MemPool, a manycore system with 256 RV32IMAXpulpimg "Snitch" cores featuring application-tunable functional units. We designed and implemented an efficient low-latency PE to L1-memory interconnect, an optimized instruction path to ensure each PE's independent execution, and a powerful DMA engine and system interconnect to stream data in and out. MemPool is easy to program, with all the cores sharing a global view of a large, multi-banked, L1 scratchpad memory, accessible within at most five cycles in the absence of conflicts. We provide multiple runtimes to program MemPool at different abstraction levels and illustrate its versatility with a wide set of applications. MemPool runs at 600 MHz (60 gate delays) in typical conditions (TT/0.80 V/25 °C) in 22 nm FDX technology and achieves a performance of up to 229 GOPS or 180 GOPS/W with less than 2% of execution stalls.

Explore related subjects

cs.AR

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Samuel Riedel, Matheus Cavalcante, Renzo Andri, Luca Benini. 2023-11-28. MemPool: A Scalable Manycore Architecture with a Low-Latency Shared L1 Memory. https://doi.org/10.1109/tc.2023.3307796

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

A System Architecture for Low Latency Multiprogramming Quantum Computing

As quantum systems scale, multiprogramming quantum computing (MPQC) provides a practical way to improve device utilization and throughput. However, because quantum executables are device-dependent, non-portable across qubit regions, and highly susceptible to noise and crosstalk, current MPQC pipelines rely on expensive online compilation to co-optimize concurrently running programs. This online step dominates runtime and impedes low-latency deployments for practical, real-world workloads in the future, such as repeatedly invoked quantum neural network (QNN) services. We present FLAMENCO, a fidelity-aware multi-version compilation system that enables independent offline compilation and low-latency multiprogramming at runtime. \textbf{At the architecture level}, the system abstracts devices into compute units to reduce the search space of region allocation. \textbf{At compile time}, it generates diverse executable versions for each program---each bound to a distinct qubit region---allowing dynamic region selection at runtime and overcoming non-portability. \textbf{At runtime}, it employs a lightweight orchestrator that uses post-compilation fidelity metrics to avoid conflicts and mitigate crosstalk, supporting conflict-free co-execution without online co-optimization. Evaluations show that FLAMENCO achieves over 5$\times$ runtime speedup in post-scheduling execution while maintaining comparable execution fidelity on common-success workloads. When integrated into existing scheduler-coupled systems, it raises workload-level conflict-free orchestration ratio from 0.183 to 1.000 for HyperQ and from 0.050 to 0.400 for QOS.

cs.AR↗
arXiv2026

HBFSim: Fast and Faithful Simulation of High-Bandwidth Flash Under Real GPU Execution

High-Bandwidth Flash (HBF) places high-capacity NAND beside HBM to relieve the memory-capacity bottleneck of LLM inference, yet its system-level behavior cannot be evaluated before hardware becomes available. Cycle-level GPU simulators are too slow for production-scale models. Trace replay has a further shortcoming: it cannot capture the allocation, migration, and execution changes induced by different HBM-HBF configurations. Our key insight is that HBF need not be evaluated by simulating the GPU: only the program-visible effects of HBF need to be modeled. And only a real LLM workload running on real hardware can answer the arguments about HBF. Hence the modeled service has to be injected into that running program, and the injection must not destroy the GPU concurrency that would hide the original I/O latency. We present HBFSim, an open-source HBF simulator that executes LLM workloads on a real GPU while modeling HBF timing, thermal, and other behaviors online. HBFSim rewrites the PTX of the workload's kernels and routes accesses inside a registered address range into the HBF simulator. It supports asynchronous TMA transfers and capacities beyond physical GPU memory. HBFSim leaves the model's run unaffected across ordinary-memory, TMA, and capacity-mode tests. The delay it injects matches the delay requested to within 0.152%. We also design a coupled thermal module that puts HBF, HBM, and the GPU in one advanced package, which is important for answering how severe the hot throttling problem becomes after HBF runs for a long time. Experiments with Qwen3-30B show how package heating, HBM-HBF allocation, and shared MoE demand jointly constrain the design space of future HBF accelerators.

cs.AR↗
arXiv2026

Bio-inspired Learning and Decision-Making with Probabilistic In-Memory Computing Hardware: Part 2

This report extends our previous work (Part 1), which introduced an energy-based model for learning and decision-making under uncertainty. The model leverages stochastic Langevin dynamics to continuously evolve approximate probability distributions over neuron states and model weights. However, as noted in Part 1 and confirmed through GPU-based implementations, large-scale probabilistic energy-based models of this nature face significant scalability challenges due to excessive execution latency. This latency stems from a fundamental mismatch: massively parallel models with low arithmetic intensity (such as energy-based models) are being executed on processor architectures like GPUs that rely on high-bandwidth memory (HBM) interfaces. The HBM imposes brutally sequential execution constraints on inherently parallelizable models, creating the false impression that such models are unscalable. In reality, it is the GPU architecture itself, with its dependence on HBM interfaces, that is not a scalable processor architecture for this class of AI model. In this report, we demonstrate using a detailed transaction-level model (TLM) of a probabilistic analogue in-memory computing (AIMC) processor that the same energy-based model can execute well over 1000x faster than data-center-grade hardware by eliminating the HBM interface and performing computation directly within on-chip memory.

cs.AR↗