A 6G White Paper on Connectivity for Remote Areas

Harri Saarnisaari; Sudhir Dixit; Mohamed-Slim Alouini; Abdelaali Chaoub; Marco Giordani; Adrian Kliks; Marja Matinmikko-Blue; Nan Zhang; Anuj Agrawal; Mats Andersson; Vimal Bhatia; Wei Cao; Yunfei Chen; Wei Feng; Marjo Heikkilä; Josep M. Jornet; Luciano Mendes; Heikki Karvonen; Brejesh Lall; Matti Latva-aho; Xiangling Li; Kalle Lähetkangas; Moshe T. Masonta; Alok Pandey; Pekka Pirinen; Khaled Rabie; Tlou M. Ramoroka; Hanna Saarela; Amit Singhal; Kaibo Tian; Justin Wang; Chenchen Zhang; Yang Zhen; Haibo Zhou

arXiv · 2004.14699

A 6G White Paper on Connectivity for Remote Areas

View original source ↗Read source document ↗Export metadata ↓

Abstract

In many places all over the world rural and remote areas lack proper connectivity that has led to increasing digital divide. These areas might have low population density, low incomes, etc., making them less attractive places to invest and operate connectivity networks. 6G could be the first mobile radio generation truly aiming to close the digital divide. However, in order to do so, special requirements and challenges have to be considered since the beginning of the design process. The aim of this white paper is to discuss requirements and challenges and point out related, identified research topics that have to be solved in 6G. This white paper first provides a generic discussion, shows some facts and discusses targets set in international bodies related to rural and remote connectivity and digital divide. Then the paper digs into technical details, i.e., into a solutions space. Each technical section ends with a discussion and then highlights identified 6G challenges and research ideas as a list.

Explore related subjects

eess.SP cs.NI

Keep this discovery

BibTeX RIS

Harri Saarnisaari, Sudhir Dixit, Mohamed-Slim Alouini, Abdelaali Chaoub, Marco Giordani, Adrian Kliks, Marja Matinmikko-Blue, Nan Zhang, Anuj Agrawal, Mats Andersson, Vimal Bhatia, Wei Cao, Yunfei Chen, Wei Feng, Marjo Heikkilä, Josep M. Jornet, Luciano Mendes, Heikki Karvonen, Brejesh Lall, Matti Latva-aho, Xiangling Li, Kalle Lähetkangas, Moshe T. Masonta, Alok Pandey, Pekka Pirinen, Khaled Rabie, Tlou M. Ramoroka, Hanna Saarela, Amit Singhal, Kaibo Tian, Justin Wang, Chenchen Zhang, Yang Zhen, Haibo Zhou. 2020-04-30. A 6G White Paper on Connectivity for Remote Areas. https://arxiv.org/abs/2004.14699

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Load Balancing in Multi-Shell LEO Satellite Networks with Successive Interference Cancellation

Multi-shell low Earth orbit (LEO) networks can increase service opportunities, but altitude-dependent propagation can concentrate traffic on lower shells and create strong inter-shell interference under full frequency reuse. This paper develops a mathematical framework for load balancing in multi-shell LEO satellite networks. Satellites on each shell form an independent spherical Poisson point process (SPPP), and the typical user associates with one of the per-shell serving satellites through a shell-dependent biased received-power rule, with receiver-side successive interference cancellation (SIC) under full frequency reuse. Shell-wise association probabilities, conditioned serving-distance distributions, and the rate coverage probability under shell-dependent traffic loads are derived and validated by simulation. The results show that shell-dependent biasing alleviates lower-shell traffic concentration and improves rate coverage, while receiver-side SIC mitigates the dominant lower-shell interference experienced by users associated with upper shells. Load balancing provides its largest rate-coverage gain in traffic hotspots, while SIC becomes more valuable as receive-side isolation weakens. With a fixed satellite budget, distributing satellites across multiple shells can further improve hotspot rate coverage by adding shell-wise serving opportunities.

eess.SP↗

arXiv2026

Tensor Decomposition Based Mixed-Field Sensing for XL-MIMO AFDM Systems

Integrated sensing and communications enabled by extremely large-scale MIMO (XL-MIMO) and affine frequency division multiplexing (AFDM) is a highly promising paradigm for vehicular networks. However, the near-field spherical wavefront distortions induce severe non-linear parameter coupling, while the highly dynamic scattering environments exacerbate mismatch errors. To address these critical challenges, this paper proposes a novel tensor-based sensing scheme for XL-MIMO AFDM systems. First, the received signals are reformulated into a tensor, followed by an efficient decomposition approach that exploits the inherent Vandermonde structure of the factor matrices. This allows parameters to be directly estimated from the decomposed matrices, effectively avoiding inter-parameter coupling. Subsequently, a symmetric decoupling and real-domain manifold optimization algorithm is proposed for angle of arrival estimation, circumventing the high-dimensional searches typically induced by near-field effects. Furthermore, a baseband reconstruction and analytical gradient-based algorithm is developed to perform delay-Doppler estimation in the continuous parameter domain, fundamentally eradicating the grid-mismatch errors inherent in high-mobility scenarios. With these decoupled factors, the remaining unknown angle of departure can be readily extracted. Extensive simulation results demonstrate that the proposed scheme achieves orders-of-magnitude improvements in delay-Doppler accuracy and eliminates the error floors in angular estimation that severely bottleneck state-of-the-art baselines.

eess.SP↗

arXiv2026

Radio Map Construction with Post-Hoc Location Calibration under Quasi-Static Positioning Errors: Joint Estimation, Performance Bounds, and GNSS-Based Evaluation

Radio maps enable environment-aware wireless and Internet-of-Things applications and can be constructed from location-tagged received signal strength (RSS) measurements collected by mobile devices. In urban environments, temporally correlated GNSS errors can shift an entire sensing trajectory, causing systematic spatial misregistration that is not mitigated by collecting more measurements. This paper presents a radio-map construction framework that uses the radio measurements themselves to calibrate erroneous location tags after data collection. The dominant positioning error is modeled as a sensor-specific quasi-static offset, which is jointly estimated with radio-propagation parameters in a Gaussian process regression (GPR) framework by exploiting complementary spatial information from distance-dependent path loss and spatially correlated shadowing. We establish lower and upper bounds on the conditional Bayes risk and show that, under a translation-invariant trajectory model, trajectory information alone cannot identify the quasi-static offset, thereby motivating the use of RSS-derived spatial information for calibration. Numerical evaluations across propagation conditions show that the proposed method reduces the mean squared error (MSE) gap from ideal GPR to approximately $3.26\mathrm{dB}^2$, compared with about $10\mathrm{dB}^2$ for position-error-agnostic and noisy-input GPR baselines. Evaluation using positioning-error models derived from smartphone GNSS measurements shows that the proposed method outperforms a KF--RTS trajectory-smoothing baseline despite unmodeled time-varying positioning errors, remaining within approximately $5\mathrm{dB}^2$ of ideal GPR at the median MSE. These results demonstrate that RSS measurements can serve not only as observations for radio-map reconstruction but also as spatial cues for post-hoc calibration of imperfectly geotagged sensing data.

eess.SP↗